Search

This work focuses on the development of a combined statistical-mechanical approach to predict changes in landslide displacement rates from observed changes in rainfall amounts. The forecasting tool FLAME (Forecasting Landslides Accelerations induced by Meteorological Events) associates (1) a statistical impulse response (IR) model to simulate the changes in landslide rates by computing a transfer function between the input signal (e.g. rainfall) and the output signal (e.g. displacement) and (2) a simple 1D mechanical (MA) model (e.g. viscoplastic rheology) to take into account changes in pore water pressure. The models have been applied to forecast the displacement rates at the Super-Sauze landslide (South East France). The performance of different combinations of models (IR model alone, MA model alone and a combination of the IR and MA models) is evaluated against observed changes in pore water pressures and displacement rates at the study site. Results indicate that the three models are able to reproduce the displacement pattern in the general kinematic regime (succession of acceleration and deceleration phases); conversely, extreme kinematic regimes such as fluidization of part of the landslide mass are not being reproduced. The approach constitutes however a robust tool to predict changes in displacement rates from rainfall or groundwater time series. [ABSTRACT FROM AUTHOR]

In Italy, rainfall-induced landslides are recurrent phenomena that cause societal and economic damage. Thus, assessing the rainfall conditions responsible for landslides is important and may contribute to reducing risk. The prediction of rainfall-induced landslides relies primarily on empirical rainfall thresholds. However, the thresholds are affected by uncertainties that limit their use in operational warning systems. A source of uncertainty lies in the characterization of the rainfall events responsible for landslides. Objective criteria for the definition of rainfall events are lacking. To overcome the problem, we propose an algorithm that reconstructs the rainfall events, identifies the rainfall conditions that have resulted in landslides, and measures the duration and the cumulated rainfall for the events. The algorithm is independent from the local settings and uses a reduced set of parameters to account for different physical settings and operational conditions. We tested the algorithm in Sicily, Italy, with rainfall and landslide information between January 2002 and December 2012. The rainfall conditions responsible for landslides identified by the algorithm were compared against results obtained manually. The algorithm was proven capable of accurately reconstructing most (87.7 %) of the rainfall events. For each landslide, the algorithm identified a variable number of rainfall conditions responsible for the failures, which are equally likely triggers of the landslide. This opens the possibility of evaluating the uncertainty introduced by different criteria to determine the rainfall events responsible for landslides. Use of the algorithm shall contribute to reducing the uncertainty in the definition of landslide-triggering rainfall events, to compiling large catalogues of rainfall events with landslides and to determining reliable rainfall thresholds for possible landslide occurrence. [ABSTRACT FROM AUTHOR]

This paper concerns a regional scale warning system for landslides that relies on a decisional algorithm based on the comparison between rainfall recordings and statistically defined thresholds. The latter were based on the total amount of rainfall, which was cumulated considering different time intervals: 1-, 2- and 3-day cumulates took into account the critical rainfall influencing shallow movements, whilst a variable time interval cumulate (up to 240 days) was used to consider the triggering of deep-seated landslides in low permeability terrains. A prototypal version of the model was initially set up to define statistical thresholds. Then, thresholds were calibrated using a database of past georegistered and dated landslides. A validation procedure showed that the calibration highly improves the results and therefore the model was integrated in the regional warning system of Emilia Romagna (Italy) for civil protection purposes. The proposed methodology could be easily implemented in other similar regions and countries where a sufficiently organised meteorological network is present. [ABSTRACT FROM AUTHOR]