Search

Recent work modeling the rheological behavior of human blood indicates that blood has all the hallmark features of a complex material, including shear-thinning, viscoelastic behavior, yield stress, and thixotropy. There is renewed interest in the modeling of human blood with thixo-elasto-visco-plastic rheological models. Previous work [Armstrong and Tussing, Phys. Fluids 32, 094111 (2020)] has led to the development of the enhanced thixotropic viscoelastic model for blood (ethixo-mHAWB; called here, after a minor modification, ETV) that incorporates viscoelasticity to a thixotropic model for the stress contributed by the rouleaux aggregates, in addition to describing using a nonlinear viscoelastic model the stress contributed by the individual red blood cells deforming under the action of the flow. This model has shown superior performance in fitting human blood steady state and transient rheological data from a strain-controlled rheometer [Horner et al., J. Rheol. 62, 577–591 (2018); 63, 799–813 (2019)] as compared to other alternate models. In the present work, we first develop another variant of the ETV model, the enhanced structural stress thixotropic-viscoelastic (ESSTV) model, and the modification patterned following an elastoviscoplastic model developed recently [Varchanis et al., J. Rheol. 63, 609–639 (2019)]. We develop full tensorial stress formulations of the rouleaux stresses for both the above-mentioned models, resulting in the t-ETV and t-ESSTV models. We use steady state and step-ups, and step-downs in shear rate data to independently fit the parameters of all before-mentioned models. We compare predictions against experimental data obtained on small, large, and unidirectional large amplitude oscillatory shear conditions. We find that the full tensor stress formulations t-ETV and t-ESSTV significantly improved the predictive capability of the earlier ETV model. [ABSTRACT FROM AUTHOR]

In rheological experiments, the relationship between stress and strain is determined. In the transient regime, this relationship may depend on which of these properties is applied and which is measured. In general, data collected using one or the other as the control parameter are not necessarily equivalent. Moreover, the assumed steady state and the relaxation following this state might depend on whether stress or strain has been applied. We examined colloidal suspensions with concentrations around the glass transition and compared their response to stress and strain, in particular, their transient response after the start-up of shear, their steady state, and their relaxation after cessation of shear. After the start-up of shear, the transient behavior was found to significantly depend on whether the sample is exposed to a constant shear rate or a constant stress. Nevertheless, the transients lead to a rheological steady state that is independent of how it is reached, as long as yielding occurred and the corresponding shear rate or stress is applied. After cessation of shear, the relaxation under strain and stress control shows both similarities and differences. This is quantified based on, e.g., the hydrodynamic, Brownian, and residual stress as well as the recovered strain. In addition, the responses of the rheometers to the abrupt changes have been characterized. The corresponding technical data are presented and taken into account in the data interpretation. [ABSTRACT FROM AUTHOR]