Search

In the field of traffic management and control systems, we are witnessing a symbiotic evolution, where intelligent infrastructure is progressively collaborating with smart vehicles to produce benefits for traffic monitoring and security, by rapidly identifying hazardous behaviours. This exponential growth is due to the rapid development of deep learning in recent years, as well as the improvements in computer vision models. These technologies allow for monitoring tasks without the need to install numerous sensors or stop the traffic, using the extensive camera network of surveillance cameras already present in worldwide roads. This study proposes a computer vision-based solution that allows for real-time processing of video streams through edge computing devices, eliminating the need for Internet connectivity or dedicated sensors. The proposed system employs deep learning algorithms and vision techniques that perform vehicle detection, classification, tracking, speed estimation, and vehicle geolocation. [ABSTRACT FROM AUTHOR]

Vehicle trajectory prediction can provide important support for intelligent transportation systems in areas such as autonomous driving, traffic control, and traffic flow optimization. Predicting vehicle trajectories is an extremely challenging task that not only depends on the vehicle's historical trajectory but also on the dynamic and complex social-temporal relationships of the surrounding traffic network. The trajectory of the target vehicle is influenced by surrounding vehicles. However, existing methods have shortcomings in considering both time dependency and interactive dependency between vehicles or insufficient consideration of the impact of surrounding vehicles. To address this issue, we propose a hybrid deep learning model based on a temporal convolutional network (TCN) that considers local and global interactions between vehicles. Specifically, we use a social convolutional pooling layer to capture local interaction features between vehicles and a multihead self-attention layer to capture global interaction features between vehicles. Finally, we combine these two features using an encoder-decoder structure to predict vehicle trajectories. Through experiments on the Next-Generation Simulation (NGSIM) public dataset and ablation experiments, we validate the effectiveness of our model. [ABSTRACT FROM AUTHOR]

The timely and accurate forecasting of urban road traffic is crucial for smart city traffic management and control. It can assist both drivers and traffic controllers in selecting efficient routes and diverting traffic to less congested roads. However, estimating traffic volume while taking into account external factors such as weather and accidents is still a challenge. In this research, we propose a hybrid deep learning framework, double attention graph neural network BiLSTM (DAGNBL), that utilizes a graph neural network to represent spatial characteristics and bidirectional LSTM units to capture temporal dependencies between features. Attention modules are added to the GNN and BLSTM to find high-impact attention weight values for the chosen road section. Our model offers the best prediction accuracy with a mean absolute percentage error of 5.21% and a root mean squared error of 4. It can be utilized as a useful tool for predicting traffic flow on certain stretches of road. [ABSTRACT FROM AUTHOR]

The intelligent transportation system (ITS) has been proven capable of effectively addressing traffic congestion issues. For vehicles to perform effectively and improve mobility under the intelligent driving environment, real-time prediction of traffic speed is undoubtedly essential. Considering the complex spatiotemporal dependency inherent in traffic data, conventional prediction models encounter many limitations. To improve the prediction performance and investigate the temporal features, this study focuses on emerging deep neural networks (DNNs) using the Caltrans Performance Measurement System (PeMS) data. This research also establishes an intelligent driving environment in the simulation and compares the traditional car-following model with deep learning methods in terms of multiple performance metrics. The results indicate that both supervised learning and unsupervised learning are superior to the simulation-based model on the freeway, and the two deep learning networks are almost identical to one another. Besides, the result reveals that all models have their latent features for different time dimensions under the low traffic loads, transition states, and heavy traffic loads. This is critical in the application of prediction technologies in ITS. The findings can assist transportation researchers and traffic engineers in both traffic operation and management, such as bottleneck identification, platooning control, and route planning. [ABSTRACT FROM AUTHOR]

Car-following models have been studied for a long time, and many traffic engineers and researchers have devoted attention to them. With the increase in machine learning, this paper proposes a fusion model based on the physics-informed deep learning framework. The purpose of this paper is to inherit the predecessors' ideas, transform them to fit a new framework, and improve the framework's accuracy. The IDM-D (intelligent driver model development) involves reenabling the effect of the following vehicle to form a complementary model (not car-following model) with the IDM (intelligent driver model). The pretreated NGSIM data are used for calibration and validation. The IDM and the IDM-D are combined with the LSTM under the framework of physics-informed deep learning, and the results are mixed in a ratio to form the final result. Using test data for simulation, the results reveal that the IDM-informed LSTM shows better performance than the LSTM and that the fusion model further improves the MSE (mean square error) of the IDM-informed LSTM. The fusion increases the accuracy during the deceleration process, which is better than just a single IDM-informed LSTM. The fusion model further explains drivers' deceleration behaviors. [ABSTRACT FROM AUTHOR]

Traffic state estimation plays a fundamental role in traffic control and management. In the connected vehicles (CVs) environment, more traffic-related data perceived and interacted by CVs can be used to estimate traffic state. However, when there is a low penetration rate of CVs, the data collected from CVs would be inadequate. Meanwhile, the representativeness of the collected data is positively correlated with the penetration rate. This article presents a traffic state estimation method based on a deep learning algorithm under a low and dynamic CVs penetration rate environment. Specifically, we design a K-Nearest Neighbor (KNN) data filling model integrating acceleration data to solve the problem of insufficient data. This method can fuse the time feature of speed by acceleration modification and mine the distribution features of speed by KNN. In addition, to reduce the estimation error caused by penetration rate, we design a Long Short-Term Memory (LSTM) model, which uses penetration rate estimated by Macroscopic Fundamental Diagram (MFD) as one of the input factors. Finally, we use the concept of operational efficiency for reference, dividing traffic state into three categories according to the estimated speed: free flow, optimal flow, and congestion. SUMO is used to simulate traffic cases under different penetration rates to evaluate our scheme. The results suggest that our data filling model can significantly improve filling accuracy under a low penetration rate; there is also a better performance of our estimation model than that of other comparison models in both low and dynamic penetration rates. [ABSTRACT FROM AUTHOR]

Traffic flow forecasting is the key to an intelligent transportation system (ITS). Currently, the short-term traffic flow forecasting methods based on deep learning need to be further improved in terms of accuracy and computational efficiency. Therefore, a short-term traffic flow forecasting model GA-TCN based on genetic algorithm (GA) optimized time convolutional neural network (TCN) is proposed in this paper. The prediction error was considered as the fitness value and the genetic algorithm was used to optimize the filters, kernel size, batch size, and dilations hyperparameters of the temporal convolutional neural network to determine the optimal fitness prediction model. Finally, the model was tested using the public dataset PEMS. The results showed that the average absolute error of the proposed GA-TCN decreased by 34.09%, 22.42%, and 26.33% compared with LSTM, GRU, and TCN in working days, while the average absolute error of the GA-TCN decreased by 24.42%, 2.33%, and 3.92% in weekend days, respectively. The results indicate that the model proposed in this paper has a better adaptability and higher prediction accuracy in short-term traffic flow forecasting compared with the existing models. The proposed model can provide important support for the formulation of a dynamic traffic control scheme. [ABSTRACT FROM AUTHOR]

With rapid development of the urbanization, how to improve the traffic lights efficiency has become an urgent issue. The traditional traffic light control is a method that calculates a series of corresponding timing parameters by optimizing the cycle length. However, fixing sequence and duration of traffic lights is inefficient for dynamic traffic flow regulation. In order to solve the above problem, this study proposes a traffic light timing optimization scheme based on deep reinforcement learning (DRL). In this scheme, the traffic lights can output an appropriate phase according to the traffic flow state of each direction at the intersection and dynamically adjust the phase length. Specifically, we first adopt Proximal Policy Optimization (PPO) to improve the convergence speed of the model. Then, we elaborate the design of state, action, and reward, with the vehicle state defined by Discrete Traffic State Encoding (DTSE) method. Finally, we conduct experiments on real traffic data via the traffic simulation platform SUMO. The results show that, compared to the traditional timing control, the proposed scheme can effectively reduce the waiting time of vehicles and queue length in various traffic flow modes. [ABSTRACT FROM AUTHOR]

The recent years have witnessed a considerable rise in the number of vehicles, which has placed transportation infrastructure and traffic control under tremendous pressure. Yielding timely and accurate traffic flow information is essential in the development of traffic control strategies. Despite the continual advances and the wealth of literature available in intelligent transportation system (ITS), there is a lack of practical traffic counting system, which is readily deployable on edge devices. In this study, we introduce a low-cost and effective edge-based system integrating object detection models to perform vehicle detecting, tracking, and counting. First, a vehicle detection dataset (VDD) representing traffic conditions in Vietnam was created. Several deep learning models for VDD were then examined on two different edge device types. Using this detection, we presented a lightweight counting method seamlessly combining with a traditional tracking method to increase counting accuracy. Finally, the traffic flow information is obtained based on counted vehicle categories and their directions. The experiment results clearly indicate that the proposed system achieves the top inference speed at around 26.8 frames per second (FPS) with 92.1% accuracy on the VDD. This proves that our proposal is capable of producing high-accuracy traffic flow information and can be applicable to ITS in order to reduce labor-intensive tasks in traffic management. [ABSTRACT FROM AUTHOR]

Controlling traffic signals to alleviate increasing traffic pressure is a concept that has received public attention for a long time. However, existing systems and methodologies for controlling traffic signals are insufficient for addressing the problem. To this end, we build a truly adaptive traffic signal control model in a traffic microsimulator, i.e., "Simulation of Urban Mobility" (SUMO), using the technology of modern deep reinforcement learning. The model is proposed based on a deep Q-network algorithm that precisely represents the elements associated with the problem: agents, environments, and actions. The real-time state of traffic, including the number of vehicles and the average speed, at one or more intersections is used as an input to the model. To reduce the average waiting time, the agents provide an optimal traffic signal phase and duration that should be implemented in both single-intersection cases and multi-intersection cases. The co-operation between agents enables the model to achieve an improvement in overall performance in a large road network. By testing with data sets pertaining to three different traffic conditions, we prove that the proposed model is better than other methods (e.g., Q-learning method, longest queue first method, and Webster fixed timing control method) for all cases. The proposed model reduces both the average waiting time and travel time, and it becomes more advantageous as the traffic environment becomes more complex. [ABSTRACT FROM AUTHOR]