Search

The OPA (ORNL-PSERC-Alaska) model has been widely used in cascading failure simulations to predict likely and plausible sequences of cascading failures. This letter focuses on an algorithmic approach to enhance the OPA model whose main engine is based on quasi-steady-state models without considering the impact of collective transient dynamics of the entire system on the sequence of cascading failures. In particular, the enhanced OPA model incorporates dynamically induced cascading failures in fast time scales, which allows it to capture more realistic and detailed cascading scenarios. In this work, we outline the enhanced OPA model and provide simulation results to illustrate its feasibility with the realistic test network. [ABSTRACT FROM AUTHOR]

In this work we present a novel technique, based on a trust-region optimization algorithm and second-order trajectory sensitivities, to compute the extreme trajectories of power system dynamic simulations given a bounded set that represents parametric uncertainty. We show how this method, while remaining computationally efficient compared with sampling-based techniques, overcomes the limitations of previous sensitivity-based techniques to approximate the bounds of the trajectories when the local approximation loses validity because of the nonlinearity. We present several numerical experiments that showcase the accuracy and scalability of the technique, including a demonstration on the IEEE New England test system. [ABSTRACT FROM AUTHOR]

The fast development of renewable energies leads to an increase in the power electronics penetration in transmission systems. This is particularly true if one considers a 100% renewable energies power system, where wind and solar photovoltaic energies, which make most of the renewable energies connections today, are connected to the grid through power electronics converters. Because power electronics-based generators and synchronous machines-based generators have very different dynamic behaviours, some approximations usually used to run transient simulations of transmission systems might not be optimal for future grids. The systematic use of the phasor approximation applied to the power lines, implemented in most of the Transient Simulation Programs, is indeed not relevant any more. To avoid the use of Electromagnetic Transient simulations, that are resource-demanding and time-consuming, this paper presents a novel Model Order Reduction technique for large grids with a high penetration of power electronic devices. Compared to the classical phasor approximation, this event-based state residualization approximation allows accurate transient simulations and at the same time an optimal reduction of the number of the system’s state variables depending on the observed variables, the considered events and the tolerated approximation error. [ABSTRACT FROM AUTHOR]

Power system planning is essential for ensuring development of a safe and stable power system. Articles on power system planning have been published in recent decades. In this paper, bibliometric analysis is applied to power system planning to identify its basic characteristics, and to summarize the research hotspots and trends. A total of 4562 publications were obtained from the Web of Science during 1971–2020. The 4562 publications cover 8136 keywords, 1526 journals, 107 countries/territories, and 2519 institutions. IEEE Transactions on Power Systems is the key journal in power system planning; USA, China, and England are the countries that dominate publication production. Research hotspots and trends were analyzed using author-keyword co-occurrence analysis and keyword burst detection. Four clusters were identified and topics from Cluster I (central nodes as power system stability and transient stability) and Cluster IV (central nodes as power system simulation and economics) are important for power system planning research. However, their relative popularities have declined over the past two decades. This indicates that Cluster II (central nodes as renewable energy, wind power, and energy storage) and Cluster III (central nodes as distributed generation and smart grids) will be the focus of future research. [ABSTRACT FROM AUTHOR]

This paper presents a novel approach to dynamic phasor-based transient stability simulation. The proposed method is based on the modified nodal analysis (MNA) approach to circuit simulation, which is used to construct continuous differential-algebraic equations (DAEs). The proposed method makes use of the stamp technique, which makes it possible to construct a general purpose MNA-based simulator. Stamp-based models for common power system components are derived in this work. A new MNA-based synchronous machine model is presented, which represents machines as nonlinear inductances instead of subtransient equivalents. The resultant continuous DAEs are numerically solved using the general purpose variable step and variable order library IDA. Simulation results from the IEEE 68 bus test system, a real 400 bus power system, and the IEEE 39 bus test system with an embedded HVdc transmission system demonstrate that the proposed method is suitable for large ac networks with power electronic devices. The results demonstrate good agreement between the proposed method and electromagnetic transient (EMT) simulation. The results also demonstrate that the proposed method is fast and scalable with CPU times that are up to 200 times faster than EMT simulation. [ABSTRACT FROM AUTHOR]

With continuing advances in high-performance parallel computing platforms, parallel algorithms have become powerful tools for development of faster than real-time power system dynamic simulations. In particular, it has been demonstrated in recent years that parallel-in-time (Parareal) algorithms have the potential to achieve such an ambitious goal. The selection of a fast and reasonably accurate coarse operator of the Parareal algorithm is crucial for its effective utilization and performance. This paper examines semi-analytical solution (SAS) methods as the coarse operators of the Parareal algorithm and explores performance of the SAS methods to the standard numerical time integration methods. Two promising time-power series-based SAS methods were considered; Adomian decomposition method and Homotopy analysis method with a windowing approach for improving the convergence. Numerical performance case studies on 10-generator 39-bus system and 327-generator 2383-bus system were performed for these coarse operators over different disturbances, evaluating the number of Parareal iterations, computational time, and stability of convergence. All the coarse operators tested with different scenarios have converged to the same corresponding true solution (if they are convergent) and the SAS methods provide comparable computational speed, while having more stable convergence to the true solution in many cases. [ABSTRACT FROM AUTHOR]

The paper presents accurate and simple dynamic model of a supercapacitor bank system for power system dynamics studies. The proposed model is derived from a detailed RC circuit representation. Furthermore, a complete control system of the supercapacitor bank is also presented. The proposed model is easy to integrate in any power system simulation software and consists of only up to four standard datasheet parameters. The performance of the proposed model in grid frequency control and low-voltage ride through is illustrated on IEEE 14-bus test system in DIgSILENT PowerFactory. It is shown that in case of transient stability simulations the ideal (simplified) model of the supercapacitor can be used while in case of frequency control the ideal representation may not always be appropriate. [ABSTRACT FROM AUTHOR]

The transience and unpredictability of processes in electric power systems (EPS) determine complexity of its control. This problem is especially relevant for EPS with renewable energy sources and flexible alternating current transmission systems technologies. Automatic control systems simplify the solution of this problem. Despite this, many issues related to EPS state control are solved by power system operators. Decision support systems (DSS) are applying to increase efficiency of operators work. However, existing algorithms in practice are inoperable in some cases: unrealizable decisions are formed, or decision cannot be found at all, etc. Another important problem is impossibility to preliminarily verify the proposed solution. In this regard, operators can additionally use EPS simulators, which are usually limited either by the size of simulated scheme or by the details of equipment mathematical models. The limitations are a consequence of numerical methods using, which are badly applicable for large-scale power systems simulation. In this article, a novel DSS has been developed based on a hybrid approach to EPS modeling combining properties and capabilities of several simulation techniques: analog, physical and digital. The implicit integration of differential equations in analog way makes possible modeling faster than real time. Such opportunity allows operator to verify more decisions and select the most effective ones. The algorithm for DSS application has been developed and described in the article. The properties and capabilities of the developed DSS are confirmed by experimental studies and tests in a real EPS. [ABSTRACT FROM AUTHOR]

In transient stability simulators such as PSS/E, the bus frequency is estimated using a window of (positive-sequence) phasor angle measurements. A digital filter is often used to account for the filtering effect in actual measurement devices and to eliminate sudden changes during frequency computations. Although transient stability simulators label the filtered angle derivative as the “frequency,” the frequency provided by such programs does not match actual measurements reported by phasor measurement units (PMUs), which makes it difficult to gauge the validity of studies (e.g., wide-area event detection and control applications) that are based on such simulations. In this paper, we implement a frequency computation method directly using positive phasor angles provided by simulators. The proposed method is tested on two systems extensively and validated against the measurements of an actual PMU. The improved frequency measurements closely match PMU responses. Cross-validation results also suggest the method may be used for other systems without conducting full time-domain simulations. [ABSTRACT FROM AUTHOR]