Search

The coal seam gas development in closed gob zone is still in the exploratory stage in China, and potential evaluation and sweet spots selection are the key issues. This paper establishes a complete evaluation system for selecting sweet spots for closed gob methane extraction with surface wells in the Tiefa mining area to reduce the blindness of area selection. The one‐vote veto system, the comprehensive evaluation index system, and the AHP‐entropy combined weight model are used to screen and evaluate the closed gob zones in the Tiefa mining area. A total of twenty evaluation units are evaluated and the development potential of which is classified as three levels by the optimal segmentation method. The relationship between the results of the assessment and the closed gob methane resource is also discussed, as well as the combined weight distribution coefficient. The results show that the development potential of the block cannot be estimated simply by the closed gob methane resource because the consistency between the comprehensive evaluation value and the closed gob methane resource is poor. The size of the combined weight distribution coefficient has little effect on the comprehensive evaluation values and only affects the ranking of evaluation units in a small range. [ABSTRACT FROM AUTHOR]

The effective extraction radius of borehole is the main parameter for determining the design and layout for coalbed methane extraction. This paper is aimed at the problem that the criteria and calculation methods for the effective extraction radius of coal seams are not comprehensive. With Wudong Coal Mine in China taken as an example, the critical gas pressure (0.441 MPa) for the calculation of effective extraction radius is first defined. Next, the gas seepage unit model around the borehole is developed, and the theoretical mathematical expression to calculate the effective extraction radius is derived. Then, the numerical simulation of gas extraction is carried out through a computational fluid dynamics program, and the effective extraction radius is obtained numerically. Furthermore, the influence of original gas pressure, borehole diameter, and negative pressure of gas extraction on gas extraction is analyzed. Finally, the results from the theoretical calculation and numerical simulation are validated by the field engineering measurement and the average relative error is small (less than 10%). The results indicate that the effective extraction radius has a linear relationship with the extraction time. Moreover, it is found that the original gas pressure is the main factor affecting the effective extraction radius and the effective extraction radius is proportional to the borehole diameter and negative pressure through analysis. Therefore, the above findings can provide a theoretical basis for determining parameters such as borehole spacing and extraction time of gas extraction in coal mines. [ABSTRACT FROM AUTHOR]

Coal seam with low permeability is widely distributed in China. Injection of flue gas (N2:CO2 = 0.85:0.15) is an effective approach to improve coal seam gas drainage efficiency. This process relates complex responses among ternary gases (CH4, CO2, and N2) competitive sorption on coals, gas diffusion, gas‐water migration by means of two‐phase flow, and coal deformation. In this paper, an improved hydraulic‐mechanical model coupling above interactions is established for flue gas injection enhanced gas drainage. This model is used to simulate flue gas enhanced drainage by finite element method. The sensitivity analyses of key factors are made to recovery a better understanding on the processes controlling flue gas enhanced drainage. Results show that the flue gas enhanced drainage can indeed improve the efficiency of gas extraction and reduce the gas pressure to the required value in a shorter duration. Due to the competitive adsorption and gas sweeping effect of injected flue gas, CH4 is driven toward drainage borehole, and CH4 pressure and content near the injection borehole decrease faster than that near the drainage borehole. The peak CH4 pressure laterally moves from the injection borehole to the drainage borehole. Higher injection pressure, initial permeability, and smaller sorption affinity ratios may lead to greater CH4 production rate at early drainage stage, but smaller CH4 production rate at late stage. The factors controlling the behavior of flue gas enhanced drainage are initial permeability, injection pressure, and sorption affinity ratios in order. This work offers useful framework to investigate important technical challenges associated with enhanced mine gas drainage, as well as unconventional gas development. [ABSTRACT FROM AUTHOR]

China is vigorously promoting the development of coalbed methane (CBM) resources because CBM is cleaner than coal and a hazardous gas in coal mining. However, the CBM production in China is significantly lower than that in other coal‐rich countries, such as Australia and the United States. In this paper, the main problems hindering CBM development in China are discussed to provide management suggestions for the government. These key problems include exploration and development techniques, the overlap of mining rights, management, financial supporting policy, investment environment, regulations, and market conditions. The results of this study indicate that to improve the development of the CBM industry in China, national and local governments must enact specific and exercisable regulations to increase financial support, improve technology, increase investment in CBM exploration, strengthen public project establishment, and improve the reform of CBM exploration and development policies. [ABSTRACT FROM AUTHOR]

Coal permeability is a key parameter that affects the drainage of coal bed methane (CBM). Owing to the lower original permeability of coal seams in China, more attention was paid to the study of damage‐induced permeability laws. However, the theory of damage‐induced permeability still needs to be improved. In this paper, the permeability evolution experiments during the complete stress–strain process of coal were carried out firstly. The results are shown that with the increase in axial strain, the coal permeability decreases slowly at first, then increases rapidly, and finally increases slowly or even remains unchanged, and the peak stress point can be regarded as the extreme point of permeability. Then, the equivalent plastic strain was used to describe the damage of coal. Based on the above results, a new damage‐induced permeability model was developed, and the new model can match the experimental data of permeability very well. In addition, solid–gas coupling models of coal were developed based on the new permeability model, and the numerical results show that there is a region of sudden increase in permeability around the borehole where plastic failure occurs, which indicates that the damage‐induced permeability model is reasonable. Finally, the results of numerical simulation of gas predrainage in combination of soft coal and hard coal under different cases were used to optimize the borehole layout of gas predrainage in the field. [ABSTRACT FROM AUTHOR]