Search

The coal production exploited from extra‐thick coal seams accounts for 45% of China's total coal production. With large coal output, the extra‐thick coal seams require that the chamber section be more than 100 m2. In case of parting (the noncoal rock, usually mudstone, sandwiched in the coal seam) in the extra‐thick coal seams, the integrity of the coal seams will be damaged and the large‐section chamber is extremely easy to occur rib spalling and roof leakage, which will increase the chamber's supporting difficulty. To solve such problems, this paper took the electromechanical chamber in Tashan Coal Mine as the engineering background and analyzed the deformation and failure characteristics of this chamber surrounding rocks by the numerical simulation method during the excavation process. The results indicated that the failure areas of surrounding rocks were mainly in partings, chamber ribs, and chamber dome with the failure depths of 15 m, 10 m, and 5 m, respectively. Based on the obtained deformation and failure characteristics, the supporting method of grouting integrated with high‐strength bolts and anchor cables was put forward. The grouting method was firstly used to improve the integrity of the chamber surrounding rocks, and the high‐strength bolts and anchor cables were used for supporting. Then, the supporting parameters of the bolts and anchor cables and the grouting parameters were optimized by the numerical simulation method. The optimized parameters were applied in the electromechanical chamber in Tashan Coal Mine, and the on‐site chamber ribs lateral displacement and roof separation amounts were only 0.018 m and 0.012 m, respectively, indicating that the surrounding rocks were controlled effectively. [ABSTRACT FROM AUTHOR]

The increase in extraction height will increase the mining‐induced overlying strata failure height. In this scenario, the strata pressure behavior is strong in a fully mechanized face with large mining height (FMFLMH), which frequently causes coal wall falls, roof falls, and hydraulic support failure accidents (e.g., support closure and hydraulic column damage). The key to solving these issues is to determine support's working resistance of the FMFLMH. In this paper, comprehensive theoretical analysis, numerical simulation, and field observation were applied to determine the support's working resistance in the FMFLMH based on movement type of the first subordinate key stratum (SKS 1). First, six kinds of movement types of SKS 1 in the FMFLMH are found and defined by theoretical analysis and numerical simulation, which are the direct caving movement type of cantilever structure (direct caving), the double‐sided rotation movement type of cantilever structure (double‐side rotation), the quadratic rotation movement type of cantilever structure (quadratic rotation), the alternative movement type of cantilever structure hinged structure (alternate hinged), the voussoir beam structure movement type (voussoir), and the short voussoir beam structure movement type (short voussoir), respectively. Besides, based on this, the support load calculation model of each movement type was established, and a formula for the support working resistance of each movement type was obtained. Finally, the correctness of the formulae for the support working resistance under six types of movement of SKS 1 were verified using measurement data from four FMFLMHs in China. These research results have important guiding significance for reasonable selection of support and ensuring safe mining of the FMFLMH. [ABSTRACT FROM AUTHOR]