Search

Protective coal layer (PCL) mining is a preferred regional method for preventing coal and gas outbursts; stress‐relief of PCL mining is the prerequisite of pressure‐relief gas drainage. In order to study the stress‐relief effect of PCL mining on protected coal seams and determine the protection scope of PCL mining under different inclinations, this paper uses physical simulations to study the stress‐relief law and deformation characteristics of the strata during upper PCL mining with a gentle inclination (25°), an intermediate inclination (45°), and a steep inclination (65°). The results show that as the coal seam dip increases, the degree of deformation and failure of the overburden strata gradually decreases, the severe subsidence and expansion area of the overburden strata tends to gradually develop in the uphill direction of the working face, and the floor strata underlying the protective seam significantly expand toward the goaf. However, the absolute value of the upward movement of the floor strata is much smaller than that of the roof strata; and the greater the dip angle, the greater the ratio of floor displacement to roof subsidence. The stress‐relief curve of the protected layer is approximately U‐shaped. As the inclination of the coal seam increases, the stress‐relief range decreases gradually. The maximum relief‐stress and the stress release coefficient of the protected layer initially increase and then decrease. The stress concentration coefficient of the protected coal seam initially increases first and then decreases in both uphill and downhill of the working face in the PCL. As the inclination increases, the stress‐relief angle of the downhill boundary initially increases and then decreases, while the stress‐relief angle of the uphill boundary decreases gradually. Our research results provide guidance for the delimitation of the protected scope of PCLs with different dip angles. [ABSTRACT FROM AUTHOR]

Coal and gas outburst is a potentially fatal risk during the mining of gassy coal seams, which seriously threatens the safe mining of collieries. To understand the outburst mechanism and evolution rules, a new apparatus (LSTT) was developed to conduct simulated experiment. In the context of an outburst accident in Dingji coal mine, the authors launched an authentic outburst experiment to replay the outburst accident. Experimental apparatus, similar criterion, coal‐like materials and gas sources, and experimental design were discussed systematically in this paper. Experimentally, the study analyzed the geo‐stress has significant influence on the outburst evolution. At the driving face, the stress concentration possibly caused gas outburst, under the influence of mining‐induced stress. After the outburst occurred, the stress balance of the coal changed, resulting in the instability of the coal. Furthermore, the elastic energy, gas enthalpy, and gravitational potential energy were released rapidly. The experimental result stated that outburst coal has the sorting characteristics, in line with the field outburst law. The intensity prediction model has been built based on the energy model. Moreover, the factors that impact outburst intensity were analyzed. In the process of coal and gas outburst, the gas enthalpy of gas and the elastic potential of coal are the main energy sources. This study provides guidance for the development of the outburst mechanism and outburst mine management. [ABSTRACT FROM AUTHOR]

China is vigorously promoting the development of coalbed methane (CBM) resources because CBM is cleaner than coal and a hazardous gas in coal mining. However, the CBM production in China is significantly lower than that in other coal‐rich countries, such as Australia and the United States. In this paper, the main problems hindering CBM development in China are discussed to provide management suggestions for the government. These key problems include exploration and development techniques, the overlap of mining rights, management, financial supporting policy, investment environment, regulations, and market conditions. The results of this study indicate that to improve the development of the CBM industry in China, national and local governments must enact specific and exercisable regulations to increase financial support, improve technology, increase investment in CBM exploration, strengthen public project establishment, and improve the reform of CBM exploration and development policies. [ABSTRACT FROM AUTHOR]