Search

Abstract In capacitive deionization (CDI) systems, more Faradaic reactions generally occur at a higher cell voltage, resulting in the poor ion-removal efficiency and high energy consumption, but a low cell voltage may lead to a low deionization capacity. In this study, an integrated strategy, consisting of (1) selecting the acceptable charge/discharge time ratio, (2) finding the potential windows of both positive and negative electrodes, and (3) using the charge-balanced method for determining the optimal mass ratio between the positive and negative electrodes (denoted as (m+)/(m−)), is proposed to find the optimal cell voltage of a CDI system with a high desalination efficiency and low energy consumption. According to this strategy, two newly designed cells using two types of activated carbon (AC) show excellent CDI performances; cell 1 with AC = ACS679, (m+)/(m−) = 1:1.4, and cell voltage = 1.4 V: salt adsorption capacity of 12 mg g−1, charge efficiency of 62%, and energy consumption of 109 kJ mol−1 and cell 2 with AC = ACS25, (m+)/(m−) = 1:1, and cell voltage = 1.2 V: salt adsorption capacity of 13 mg g−1, charge efficiency of 81%, and energy consumption of 72 kJ mol−1 although the potential window of water decomposition for such AC-coated electrodes in 8 mM NaCl is about 2 V. This universal strategy is applicable to all CDI systems utilizing various electrode materials. Graphical abstract Image 1 Highlights • We demonstrate a universal strategy for constructing the AC//AC cell with high CDI performances. • The same charge/discharge time ratio with high reversibility on both electrodes is the key. • Influences of two-electrode mass ratio on the desalination performances are studied. • The pH change is affected by the Faradaic reactions from the potential windows of electrodes. [ABSTRACT FROM AUTHOR]

Capacitive deionization (CDI) is an emerging electrochemical desalination technique for the energy- efficient removal of dissolved ions from aqueous solution. This is a first research attempt which describes the influence of dye molecules on capacitive deionization of salt solution. In this regard, a CDI flow cell has been fabricated and tested in order to scrutinize the electrosorptive removal of three different dye molecules such as amido black 10B (AB) (acidic dye), eosin yellow (EY) (neutral dye) and methyl violet (MV) (basic dye) from synthetic aqueous solutions. The electrosorption capacitance was analyzed by cyclic voltammetry cell and CDI flow cell using activated carbon cloth (ACC) electrodes with 1 cm 2 and 24 cm 2 surface areas respectively. The capacitance values of 106 and 99 F/g correspondingly were obtained for a steady-state CV and CDI flow cell with 50 mM Na 2 SO 4 electrolyte solution. In addition to this, the dye removal efficiency was also examined by a CDI flow cell for the solution containing 10 ppm of dye and 500 ppm of Na 2 SO 4 . The experimental results substantiate that EY exhibits strong adsorption during charging and strong desorption during discharge cycle when compared with other two dye molecules (AB & MV). Conclusively, electrosorption of dye molecules at the carbon cloth electrodes surface was found in the following order: EY > AB > MV. [ABSTRACT FROM AUTHOR]

Capacitive deionization (CDI) is an emerging technology that supplies deionized water to resolve the fresh water shortage. CDI electrodes are mainly made up of carbon materials, of which the deionization performance is closely related to their physical properties and structures. Hence, a rational design of electrode material structure is essentially significant. Functionalized graphene (fG) in particular has recently been regarded as characteristic CDI electrode material. However, preparation of fG based on graphene oxide usually results in serious secondary pollution due to usage of highly poisonous chemicals, and thus still cannot meet the demand of practical application. It is feasible that environmentally-friendly activated carbon (AC) and small amounts of fGs can be combined rationally, and used as CDI electrodes. Here, sono-assembled AC/m-phenylenediamine (mPEA) or p-phenylenediaminefG inter-connected network architecture has been constructed for the first time successfully. The specific capacitances of the AC/fG composites were found to be significantly higher than that of the AC electrode owing to mesoporous generation. Also, among all the samples, the AC composite with 5 wt % mPEA-fG exhibited an ultrahigh electrosorption capacity of 12.58 mg/g (or 0.22 mmol/g) in NaCl solution. These observations indicate that fG can serve as an efficient conductive bridge to decrease the aggregation of AC particles, and improve the electron transfer with the composite electrode. This work provides an effective strategy for the environmental and economical electrode architectures for general applications in CDI and energy storage. [ABSTRACT FROM AUTHOR]

• The first high entropy oxides based multifunctional electrode material is synthesized by simple grinding technique. • Nano-sized (< 10 nm) high entropy oxides are incorporated in surface functionalized biowaste derived activated carbon. • High salt adsorption capacity of 241 mg g−1 and cycle repeatability upto 20 cycles is demonstrated. • The excellent desalination capacity is attributed to the combined electric-double layer and pseudocapacitive mechanism. Nano-sized high entropy oxides (particle size < 10 nm) are expected to possess enhanced stability, electrochemical properties and increased potential in versatile applications than bulk metal oxides. In this study, nano-sized high entropy oxides incorporated surface functionalized coconut shell derived activated carbon (HEO/f-CSAC) is synthesized, characterised and used as an advanced multifunctional material for electrochemical energy storage and desalination. Attributed to its unique microstructure and extraordinary properties, HEO/f-CSAC shows an excellent salt adsorption capacity of 241 mg g−1 at 1.2 V in 500 mg L−1 concentration of NaCl solution, which is very high as compared to previous reports. The reason behind high salt adsorption capacity is its outstanding specific capacitance of 147.5 F g−1 at current density 1 A g−1. Moreover, the assembled lab-scale CDI unit demonstrates extremely good performance upto 20 adsorption-desorption cycles due to the long cycle life with good capacitance retention of fabricated HEO/f-CSAC based two-electrode supercapacitor. Additionally, a red light-emitting diode illumination by connecting three supercapacitors in series, indicates the high efficiency and potential of HEO/f-CSAC for real life energy-related application. These results prove that HEO/f-CSAC can be implemented for water desalination with enhanced supercapacitive performance manifesting its multifunctionality for energy and environmental applications. [Display omitted] [ABSTRACT FROM AUTHOR]

Abstract: An oxygen plasma treatment was employed to modify the surface of carbon electrodes used in capacitive deionization (CDI). X-ray photoelectron spectroscopy analysis of samples showed that oxygen plasma is mainly attaching oxygenated groups on the PTFE binder used in these electrodes. By functionalizing the binder it can increase the hydrophilicity of the electrode surface and increase the available specific surface area. 2.5min of plasma treatment resulted in the largest improvement of CDI performance of electrodes. Thermodynamic study of CDI performance showed that the modified electrodes followed Langmuir and Freundlich isotherms resulting from the increased interaction between the enhanced electrodes and water. The kinetic study showed that the CDI process followed a pseudo-first order adsorption kinetics. The calculated adsorption rate constants suggested that plasma modification can accelerate ion adsorption of electrodes. [Copyright &y& Elsevier]

Abstract: The nanostructured anatase titanium dioxide/activated carbon composite material for capacitive deionization electrode was prepared in a short time by a lower temperature two-step microwave-assisted ionothermal (sol–gel method in the presence of ionic liquid) synthesis method. This method includes a reaction and a crystallization step. In the crystallization step, the ionic liquid plays a hydrothermal analogy role in driving the surface anatase crystallization of amorphous titanium dioxide nanoparticles formed in the reaction step. The energy dispersive spectroscopic study of the composite indicates that the anatase titanium dioxide nanoparticles are evenly deposited in the matrix of activated carbon. The electrochemical property of the composite electrode was investigated. In comparison to the pristine activated carbon electrode, higher specific capacitance was observed for the nanostructured anatase titanium dioxide/activated carbon composite electrode, especially when the composite was prepared with a molar ratio of titanium tetraisopropoxide/H2O equal to 1:15. Its X-ray photoelectron spectroscopic result indicates that it has the highest amount of Ti-OH. The Ti-OH group can enhance the wetting ability and the specific capacitance of the composite electrode. The accompanying capacitive deionization result indicates that the decay of electrosorption capacity of this composite electrode is insignificant after five cycle tests. It means that the ion electrosorption–desorption becomes a reversible process. [Copyright &y& Elsevier]

Abstract: Activated carbon fiber (ACF) webs with a non-woven multi-scale texture were fabricated from polyacrylonitrile (PAN), and their electrosorption performance in capacitive deionization for desalination was investigated. PAN nanofibers were prepared by electrospinning, followed by oxidative stabilization and activation with carbon dioxide at 750–900°C, resulting in the ACF webs that were characterized by X-ray diffraction, Raman spectroscopy, scanning electron microscopy and nitrogen adsorption. The results show that the as-made ACFs have a specific surface area of 335–712m2/g and an average nanofiber diameter of 285–800nm, which can be tuned by varying the activation temperature. With the ACF webs as an electrode, an electrosorption capacity as high as 4.64mg/g was achieved on a batch-type electrosorptive setup operated at 1.6V. The ACF webs made by electrospinning are of potential as an excellent electrode material for capacitive deionization for desalination. [Copyright &y& Elsevier]

Capacitive deionization (CDI) is an emerging technology as a sustainable low energy process for desalination of brackish water. Activated carbon electrodes are often used in the CDI devices. Electrosorption capacity was found to be improved on asymmetric electrode configuration using activated carbon cloth doped with fluorine due to redistribution of electric potential. This led to improvement in desalination performance up to 12.4 mg/g for a desalination cycle of 6 min employing an asymmetric fluorinated electrode as cathode (ACC//F-ACC). A relatively high charge efficiency of 77 % was obtained representing 92 % charge efficiency neglecting the leakage currents. Furthermore, the ion adsorption rate was found to improve substantially due to an increased surface conductivity of the fluorinated electrode confirmed by Mott-Schottky analysis. Energy consumption during desalination of 1000 ppm sodium chloride solution of 0.71kWh/m3 for symmetric electrode configuration was found to reduce by 36 % upon employing asymmetric configuration. This study shows some of the benefits of asymmetric configuration to achieve an optimal operation of CDI device, as well as improvements related to energy consumption. Image, graphical abstract [ABSTRACT FROM AUTHOR]