Search

Solar-driven water splitting offers a leading-edge approach to storing abundant and intermittent solar energy and producing hydrogen as a clean and sustainable energy carrier. More importantly, constructing well-designed photocatalysts is a promising approach to develop clean hydrogen energy. In this paper, flower spherical UiO-66-(SCH3)2/ZnIn2S4 (UiOSC/ZIS) photocatalysts are successfully synthesized by a simple two-step hydrothermal method, and they exhibit high hydrogen production activity in light-driven water splitting. The optimized 30-UiOSC/ZIS (the content of UiOSC was 30 mg) composite exhibits optimal hydrogen production activity with a hydrogen production of 3433 μmol g−1 h−1, which is 5 and 235 times higher than that of pure ZIS and UiOSC, respectively. In addition, a long-cycling stability test has shown that the UiOSC/ZIS composite has good stability and recyclability. Experimental and characterization results show the formation of a type-II heterojunction between UiOSC and ZIS. This effectively suppresses the recombination of electrons–holes and promotes the carrier transfer, thus significantly improving the hydrogen production performance. This research further promotes the application of UiO-66-(SCH3)2 in the field of photocatalytic hydrogen production and provides a reference for the rational design of UiO-66-based composite photocatalysts. [ABSTRACT FROM AUTHOR]

Hydrogen (H2) is a new type of renewable energy that can meet people's growing energy needs and is environmentally friendly. In order to improve the industrial application prospects and electrochemical performance of hydrogen evolution catalysts, extensive research on transition metal materials has been carried out. Among the many catalytic materials, cobalt is an element with potential for the hydrogen evolution reaction (HER) due to its abundant reserves, low cost, and small energy barrier for H adsorption. This review classifies the latest research on cobalt-based catalysts according to the types of compound, including cobalt-based sulfides, phosphides, carbides, borides, oxides, etc., and summarizes the latest research progress of cobalt-based compound catalysts in acidic and alkaline media. Strategies to tune the properties of cobalt-based compound catalysts for high catalytic activity for HER are focused on, including structural engineering, defect engineering, and doping, etc. The advantages and limitations of each modified approach are reviewed. Not only that, but also the catalytic activity and advantages of the catalyst are evaluated by using density functional theory (DFT) calculation-related descriptors, activity evaluation parameters, etc. Finally, limitations and challenges of cobalt-based materials for HER are presented, as well as prospects for future research. This paper aims to understand the chemical and physical factors that affect cobalt-based catalysts, and to find directions for future research on cobalt-based catalysts. [ABSTRACT FROM AUTHOR]

In this paper, we present a MoP/P–Mn0.5Cd0.5S photocatalytic material (PMOMCS-Px). A novel catalyst can efficiently split water into hydrogen without precious metals. In the sacrificial agent environment, the HER (hydrogen evolution rate) of PMOMCS-P5 was 4368.25 μmol g−1 h−1 which was 11.4 times greater than the HER of Mn0.5Cd0.5S (383.19 μmol g−1 h−1), and its hydrogen production performance was better than that of Pt/Mn0.5Cd0.5S (2.0 wt% Pt). Furthermore, the hydrogen evolution performance of PMOMCS-P5 under pure water conditions was also examined, and the HER of PMOMCS-P5 was 209.76 μmol g−1 h−1, which was 20.4 times that of Mn0.5Cd0.5S (10.29 μmol g−1 h−1). Its characterization proved that the introduction of the co-catalyst MoP and P doping inhibited the recombination of e− and h+, enhanced the reduction capacity, and reduced the hydrogen precipitation reaction overpotential of PMOMCS-Px, thus enhancing the hydrogen production performance of PMOMCS-Px. Therefore, an efficient and economical photocatalyst was prepared. [ABSTRACT FROM AUTHOR]