Search

The process of flocculation in dredge plumes was investigated by field measurements using Laser In-Situ Scattering and Transmissometry (LISST), Optical Back Scatter (OBS) sensors and an Acoustic Current Doppler Profiler (ADCP) during dredging campaigns in Port Curtis, Queensland (Australia). Suspended sediment characteristics differed significantly between natural ambient suspended sediment and sediment suspended by dredging as well as between sediment suspended by mechanical and hydraulic dredgers. LISST measurements enabled distinction of the suspended sediment by origin and showed that the majority of sediment particles naturally in suspension were aggregated flocs made up of multiple smaller particles. Primary particles in natural suspended sediment had a median particle size (d 50) of 8 to 14 μm, while in-situ flocs had a d 50 of 52 to 99 μm. There were both microflocs and macroflocs present in the natural suspended sediment, with the microflocs being dominant (representing 67%–80% of the flocs). Mechanical dredging resulted in the release of individual particles, microflocs and macroflocs, with the potential for a comparable percentage of macroflocs as in natural suspended sediment (11%–27% compared to 20%–33% in natural suspended sediment). Macroflocs released by mechanical dredging were likely to have originated from the seabed. During overflow from the hopper, the suspended sediment released from the hydraulic dredger had smaller flocs compared to the natural suspended sediment, with a reduction in the d 50 of in-situ flocs from 91 to 67 μm and a reduction in the proportion of macroflocs from 32% to 24%. These results indicate that larger macroflocs present on the seabed had been broken up by the hydraulic dredging, with most of the suspended sediment remaining in the form of smaller microflocs, suggesting that the flocs were not completely disaggregated by the shear-stress generated during hydraulic dredging. Ongoing aggregation of suspended sediment was shown to occur in the sediment suspended by both dredging methods within 20–25 min of the plumes being generated. This study demonstrates the importance of considering flocculation in predictive dredge plume modelling studies to prevent significantly underestimating the settling velocity and substantially over-estimating the extent and intensity of dredge plumes if flocculation is not accounted for. • Flocculation occurs in plumes generated by both mechanical and hydraulic dredging • Flocs released by mechanical dredging were comparable to natural flocs • Flocs from hydraulic dredging were smaller than natural flocs • Ongoing aggregation of flocs occurred in the plume for both dredge types [ABSTRACT FROM AUTHOR]

Simulating cross-shore sediment transport and associated sandbar migration is still a challenging task for phase-averaged coastal morphological models. Numerical studies have mostly relied on beach morphology prediction for calibration and validation, without examining in much detail the underlying hydrodynamics, sediment concentrations and transport rates. This paper reports on a new three-dimensional coastal morphodynamic model based on the hydrodynamic model of Zheng et al. (2017), combined with an advection-diffusion type suspended sediment transport model and the extended SANTOSS near-bed sediment transport formula of Van der A et al. (2013), to represent the key cross-shore transport mechanisms. The model is are calibrated based on comprehensive measurements from a large-scale laboratory experiment involving regular plunging breaking waves over an evolving sandbar, covering detailed comparisons on hydrodynamics, sediment suspension, transport rates, and bed level evolution. Separate validation using large scale wave flume experiments were also conducted to confirm the model's performance on different conditions. Good agreements are obtained between measurements and model results, which demonstrates the model's ability to reproduce cross-shore sediment transport processes under breaking waves correctly, given that the appropriate parameterizations for intra-wave processes are included. Model results also reveal the onshore near-bed transport is related to wave-induced near-bed streaming, wave skewness and asymmetry, and bed slope effects at different locations across the beach surface. Wave breaking-induced turbulence enhances the near-bed transport within the bed boundary layer which needs to be taken into account in order to achieve good model prediction skills. • A new phase-averaged morphodynamic model is developed to represent cross-shore sediment transport and beach morphology. • The model is calibrated based on comprehensive measurements to ensure good representation of all physical processes. • Model validation demonstrate the effectiveness of the model parameters for the related sediment transport processes. • Wave asymmetry and breaking turbulence to the near bed sediment onshore transport and resuspension is very important. • Detailed modelling of near bed process to include breaking turbulence to the sediment transport predictions is required. [ABSTRACT FROM AUTHOR]

Estuarine turbidity maxima (ETMs) are of sedimentological, geomorphological and ecological significance. In this study, a well-validated and process-based sediment transport model was used to investigate the response of ETM dynamics in the Yangtze Estuary (YE) to construction of the Three Gorges Dam (TGD) and morphological evolution of the YE. The model results demonstrated that the ETM dynamics change in the upper estuary was controlled by the TGD construction. After the TGD construction, the ETM area decreased by 22% (from 1116 to 874 km2) and the ETM center location moved landward 7 km during the flood season. The estuarine morphological evolution played a key role in the ETM dynamics change of the mid-lower estuary. The ETM area decreased by 55% (from 1478 to 658 km2) and 15% (from 658 to 562 km2) due to the estuarine morphological evolution from 1998 to 2010 and from 2010 to 2018, respectively. Meanwhile, the ETM center location moved landward 38 km and 7 km during the periods 1998–2010 and 2010–2018, respectively. Overall, both the TGD construction and estuarine morphological evolution induced decreased suspended sediment concentrations in the estuary. Furthermore, the effect of TGD construction was dominant in the upper estuary, whereas the effect of estuarine morphological evolution became dominant in the mid-lower estuary. These findings provide implications for management of the YE and other similar estuaries. • Estuarine turbidity maximum (ETM) decreased by 22% and moved landward 7 km after Three Gorges Dam (TGD) construction. • Estuarine morphological evolution induced ETM to decrease by 15–55% and move landward 7–38 km. • TGD construction and morphological evolution dominated ETM changes in upper and mid-lower estuaries, respectively. [ABSTRACT FROM AUTHOR]

Macro-tidal estuaries with mountain streams are typical estuarine systems in southeastern China. Suspended sediment transport and turbidity maxima are sensitive to changes in the tidal and fluvial regimes of estuaries. To improve our understanding of river-ocean interactions and thus improve estuarine forecasts for biogeochemical processes, we developed a high-resolution hydrodynamic and sediment transport coupled model to investigate the suspended sediment transport and estuarine turbidity maximum (ETM) in the Oujiang Estuary. This estuary is characterized as a macro-tidal estuarine system with a large tidal range and drastic fluctuations in freshwater and sediment discharge. The results led to the following conclusions: (1) the ETM occurred during spring tides due to strong tidal resuspension. In contrast, it was not formed during the neap tide because of weak bottom shear stress. The ETM moves upstream to Yanmen during low river discharge and migrates downstream to the river mouth during high river discharge, causing sediment deposition in the nearshore region. (2) Owing to the characteristics of mountain streams and upstream anthropogenic reservoirs, the ETM is strengthened during low river discharge (∼100 m3 s−1) even during the wet season, which supplements the fact that the ETM is more prevalent during the dry season and withers during the wet season. The suspended sediment forming the ETM mainly originates from shallow offshore shoals owing to tidal resuspension. Owing to the weak vertical exchange flow near the river mouth, the ETM is related to the exchange flow during the low water flow. (3) The ETM excursion shows semi-diurnal variability with different transport distance for high and low river discharges. Tidal pumping dominates the suspended sediment flux in the core of the ETM, which is mainly maintained by two components of the Euler and Stokes fluxes as the tidal energy depletes during the flood tide. • Estuarine modeling was conducted to study suspended sediment dynamics. • ETM excursion occurs for high and low river. • Decomposing sediment fluxes reveals ETM mechanisms. • River discharge and tidal pumping play roles on ETM formations. [ABSTRACT FROM AUTHOR]

Predicting net suspended sediment fluxes in coastal regions is important for promoting good water quality, maritime transport and marine industries. Aggregation and disaggregation of suspended particulate matter responding to spatial and temporal variations in turbulence can control particle size and hence settling speed; little is currently known about how this influences the net suspended sediment flux. A tidal strait, in which the flux is confined to be in one of two directions, makes a good site for observing the effect of changes in particle size on the suspended sediment flux. The Menai Strait in North Wales is a narrow tidal strait in which the flow speeds increase to a maximum in the narrowest central region, the Swellies. Observations at sites on either side of the Swellies show that the median size of suspended particles varies with the speed of the tidal current, but also depends on the direction of the flow, with the smallest particles seen when the current is flowing out of the Swellies. The implication (supported by model results) is that the strong currents in the centre of the strait tear up flocs into small pieces which are then carried out towards both ends of the strait by the tide. Averaged over a tidal cycle, there is a net flux of larger particles into the Swellies and a net flux of small particles out. These results are relevant to the formation of isolated turbidity maxima around a region of strong turbulence. • We present observations of current velocity, suspended particle concentration and size at two locations in a tidal strait. • The size of the particles varies over a tidal cycle and is smallest when the flow is directed from the centre of the strait towards the observing site. • There is a net flux (averaged over a tide) of larger particles from both ends of the strait towards the centre and a net flux of small particles in the opposite direction. • A simple model of suspended particle transport in a tidal strait has been constructed to help interpret these observations. [ABSTRACT FROM AUTHOR]

The long-distance transport of Yellow River sediments has formed an omega-shaped ('Ω') distal muddy deposit in the Yellow Sea. Numerous studies have investigated the sediment dynamics and sedimentary evolution of the deposit, but several key questions remain unanswered due to insufficient observations. To reveal the mechanisms of sediment dynamics and quantify sediment transport and deposition processes, this study collected field datasets in the depocenter of the muddy deposit off the Shandong Peninsula. Bottom mounted tripods were deployed from August 18 to 27, 2017, and from February 23 to March 2, 2018, during which two strong wind events with speeds of over 10.8 m/s occurred. The results showed that near-bed suspended sediment concentration responded directly to varying hydrodynamic conditions, and significant differences in suspended sediment concentration between two wind events could be ascribed to a number of factors (e.g., tidal current, wave periods, wind stress, turbulence). The harmonic analysis demonstrated that suspended sediment variations during the spring tide were directed mainly by resuspension, while resuspension and advection contributed equally at neap tide. The variations in background suspended sediment concentration can be ascribed to the residual current. Furthermore, the sediment transport pattern is similar to the pattern of water circulation. Generally, the along-shore suspended sediment flux is about one order of magnitude higher than the cross-shore flux. In summer, the suspended sediment was transported mainly downcoast. In winter, sediment was transported downcoast during wavy periods and upcoast during calm periods. Advection dominated sediment flux in most cases, except during wavy periods when local resuspension increased significantly, and the contribution of resuspension term to along-shore flux was up to 87%. Meanwhile, cross-shore flux also increased significantly under strong winds, which was simultaneously modulated by downcoast and offshore winds. After statistical analysis, we found that offshore winds controlled the cross-shore sediment transport in winter. Using parameterized calculation and statistical analysis, the average accumulation rate of the study site was estimated to be 0.6 cm/yr. During calm periods, lower background sediment concentration in summer led to lower deposition rates than in winter. In addition, the frequent strong wind events in winter cause extremely high erosion rates. This study provides new perspectives on quantitative variations in suspended sediment transport and regional erosion/deposition from synoptic to seasonal variations in the distal mud deposit. • In-situ observations at the bottom boundary layer were conducted in summer and winter on the muddy deposit off the Shandong Peninsula. • The advection dominates sediment flux in most cases, except for during wind gusts when local resuspension increases significantly. • Combining parameterized method and observational data, the accumulation rate is estimated. [ABSTRACT FROM AUTHOR]

Typhoon Mangkhut, in 2018, was one of the worst typhoons in recent history that has made landfall in the Pearl River Estuary (PRE) China. It swept along the coast of Guangdong Province, causing severe damage to many areas and affecting more than one million people. To study the hydrodynamics and sediment dynamics in different sub-regions of the PRE during the typhoon, we implemented a 3D wave-current-sediment coupled ocean model based on the Semi-implicit Cross-scale Hydroscience Integrated System Model (SCHISM). A series of numerical experiments were conducted to study the variation in suspended sediment concentration (SSC) under different external forcing mechanisms, including tides, waves, river discharges and strong winds. Moderate Resolution Imaging Spectroradiometer (MODIS) images, collected after the typhoon landed, were used to assess the simulation results. We found that in the area where the water depth was shallower than 20 m, the increased total suspended sediment concentration was dominated by the regional erosion of fine sediment which was caused by near-bottom wave orbital velocity and bottom shear stress, especially at the four western outlets and along the western coast of the PRE. For the deeper coastal zone, at depths between 20 and 30 m offshore of the western coast, the high total SSC resulted from the contribution of fine sediment transported from the upper and middle estuaries by southwestward advection. A small amount of sand eroded and migrated locally, owing to the corresponding increase in the bottom shear stress. The variation in SSC during the typhoon had a time lag compared with other dynamic conditions, resulting in a maximum 1 h delayed response after the typhoon made landfall. Based on the results of the sensitivity experiments under the same typhoon conditions, we found that, as a result of wave-enhanced bottom shear stress, the SSC values associated with wave-current interaction were significantly higher, by as much as 1.5 and 1.3 times those of simulations without the waves at the surface and near-bottom layers, respectively. This indicated that the sediment resuspension induced by waves was important during typhoon landfall. However, the strong wind-induced current was weakened owing to the joint effect of wave radiation stress and enhanced bottom stress; thus, considering wave effects, the magnitude of the resulting sediment transport rate was smaller than that without considering wave effects, especially in shallow waters. During the approach, landfall and retreat of Typhoon Mangkhut, Lingding Bay experienced two transitions from a slight state of sediment loss to a relatively high state of sediment gain, followed by an even greater state of sediment loss. During an M 2 tidal cycle after Typhoon Mangkhut made landfall, the net seaward suspended load sediment transport in Lingding Bay reached 0.37 megatonnes. For the typhoon period covering three M 2 tidal cycles, the overall state of suspended load sediment transport in Lingding Bay was sediment loss, with the magnitude of sediment loss on the west side being larger than that of sediment gain on the east side. The magnitude of the overall sediment loss in Lingding Bay would be enlarged unrealistically by approximately 73% if the wave effects were excluded. In each period, the extent of sediment transport between the two sides of the bay was strengthened by the wave-current interaction under typhoon conditions. We determined that the net effect of wave-current interaction and strong wind-induced currents under typhoon conditions was a key factor for erosion, which resulted in SSC-influenced areas being approximately 8.7 and 4.4 times as large as those under normal weather conditions for the surface and near-bottom layers, respectively. The turbidity maximum moved from the West Shoal of Lingding Bay under normal weather to the Modaomen Estuary, which was the most affected area during the typhoon when wave effects were considered. We also showed that the relative location of the typhoon path with respect to the estuary had a more significant effect on erosion than the intensity of the typhoon. ● A 3D wave-current-sediment coupled ocean model was set up and validated to simulate sediment transport during Typhoon Mangkhut. ● Waves were primarily responsible for resuspension of both fine sediment and sand during the event. ● Strong wind-induced currents were weakened owing to the joint effect of wave radiation stress and enhanced bottom stress. ● Turbidity maximum moved westward along the path of the typhoon. [ABSTRACT FROM AUTHOR]

Pollen and spores of terrestrial plants found in marine sediments are excellent proxies for paleovegetation and paleoclimate reconstructions of surrounding areas. Ascertaining the pollen transport mechanism from terrestrial to oceanic environments is crucial for the interpretation of pollen data from marine sediments. In this study, we present the distribution of suspended sediments and pollen from 59 surface ocean water samples collected during September and October of 2013, in the northern South China Sea (SCS). The results suggest that there is a difference between the transmission mechanisms of suspended sediment and pollen/spores. Suspended sediment (silt, coarse sand, and gravel) settle quickly in nearshore and continental shelf waters due to their density. Alternately, small, light-weight pollen grains can be carried over long distances in a marine setting. The density of suspended sediment has a high correlation with the concentrations of Pinus , evergreen Quercus , Poaceae and Cyperaceae pollen as well as fern spores (e.g., Dicranopteris), but no correlation with total pollen concentration. This finding will broaden the understanding of the relationships between suspended sediments and pollen in the northern SCS and help to better interpret pollen records extracted from marine sediment cores from the SCS. • 59 sea surface water pollen samples in the northern South China Sea were investigated. • Close relationship between the densities of suspended sediment and the percentages of Pinus , evergreen Quercus , Poaceae and Cyperaceae pollen and spores. • Relatively low values of Pinus , Podocarpus and the evergreen Quercus pollen seem to be correlated with the flowering season. [ABSTRACT FROM AUTHOR]

In this paper, an improved numerical scheme is developed to estimate the initial conditions (ICs) based on a three-dimensional suspended sediment transport model (3D SSTM) with adjoint data assimilation, and the method is then applied to Hangzhou Bay as an example. Specifically, the ICs are estimated by assimilating artificial observations in twin experiments and suspended sediment concentrations (SSCs) retrieved from the Geostationary Ocean Color Imager (GOCI) in practical experiments. In the twin experiments, the sensitivity of the estimated ICs to several influential factors is discussed. The results demonstrate that the conjugate descent algorithm of Fletcher is proven to be better than the steepest descent, finite memory BFGS, and five other conjugate gradient algorithms in estimating the ICs; the estimated ICs are sensitive to initial guess values, and appropriate initial values are necessary for improving the efficiency of convergence and obtaining good results. Additionally, the errors of observations can significantly influence the estimated results. In contrast, the estimated results are not very sensitive to cloud coverage, errors in the background flow field, and length of the assimilation time window. In practical experiments, according to the conclusions of twin experiments, an improved 3D SSTM with the adjoint method is developed for Hangzhou Bay, and the surface GOCI-retrieved SSCs during typical neap and spring tidal cycles are assimilated to estimate the practical ICs. The experimental results imply that with the present estimation method, more accurate ICs can be obtained, which indicates that the adjoint method is effective in the estimation of the ICs in SSTMs. Furthermore, this study verifies that accurate ICs are critical for the numerical modeling of SSCs on the tidal cycle scale. This study is not only useful for further improving the accuracy of ICs in SSTMs but also suggestive for the initialization schemes of other matter transport models. • Initial conditions are critical for simulating suspended sediment concentrations over tidal cycles. • The adjoint method is effective in estimating initial conditions. • Data assimilation can compensate for information in areas of missing satellite data. [ABSTRACT FROM AUTHOR]