Search

[Display omitted] Self-supporting tree skeleton and densely stackable phenolic resin are cleverly coupled together by a "rebar-concrete" structure. The thick electrode as a master of space utilization has extremely high areal and volumetric energy density. This work confirms the effective coupling of the self-supporting skeleton and powder materials, providing novel ideas for the preparation of thick electrodes with high mass loading. • A "rebar-concrete" structure is proposed to facilitate the high space utilization of thick electrodes. • The areal capacitance of the thick electrode reaches an astonishing 11F cm−2. • The assembled SSC device delivers competitive areal energy density of 0.63 mWh cm−2. The thick electrode design with high packing density of active materials can increase the capacity in a limited space. However, the key challenge is still to develop a system with high space utilization and ensure electron/ion transport in thick electrode. This work proposes an interesting "rebar-concrete" structure, which successfully prepared wood/phenolic resin-derived thick electrode with high space utilization by in-situ polymerization of phenolic resin (concrete) in the wood (rebar) channel. The electrode exhibits an excellent three-dimensional interconnected hierarchical pore structure due to the uniform activation of in-situ anchored KOH particles. The mass loading (35 mg cm−2) and areal capacitance (11F cm−2) of the obtained composite electrode are increased to 446 % and 1257 % of the original balsa wood, respectively. The assembled symmetric supercapacitor (SSC) exhibits a high energy density of 0.63 mWh cm−2 (3.91 mWh cm−3) and an excellent cycle stability (95 % retention after 50 000 cycles), showing good practicability in lighting LEDs or driving a fan. This strategy achieves effective coupling of self-supporting skeleton and powder materials, providing more insights and possibilities for the preparation of high energy density thick electrodes. [ABSTRACT FROM AUTHOR]

• A green and common method was proposed to prepare biomimetic actuators. • The PNPB actuator showed excellent multi-stimulus response and synergistic effect. • Anisotropic natural bamboo endowed the PNPB actuator programmable performance. • The PNPB actuator had application potential in complex environment. Hydrogel actuators with controllable deformation and excellent biocompatibility are widely used in soft robot, valve, drug delivery and lenses. However, the stimulation response performance of existing hydrogel actuators mostly focuses on a single active layer, which greatly affects its driving performance and service life. In this work, we integrate temperature-responsive hydrogel (Poly (N-isopropyl acrylamide), PNIPAM) and pH-responsive hydrogel (polyacrylic acid, PAAc) into one system to fabricate a dual active layer composite hydrogel actuator with high performance. Based on the PAAc hydrogels achieving contract or expand at different pH values, the obtained actuator exhibits admirable bidirectional bending characteristics. In addition, the anisotropic bamboo sheet endows the hydrogel actuator with programmable 3 D complex deformation. Benefitting from the synergy and different responsiveness between the two active layers, the hydrogel actuator not only has multiple response performance, but also greatly improves its deformation degree and response speed. More importantly, these promising properties of the actuator have broad application prospects in the development of pattern design and intelligent switch. This work proposes a promising strategy for the structural design of hydrogel actuators with excellent performance, and encourages more exploration of the application range of the actuator. [ABSTRACT FROM AUTHOR]