Search

The liquefaction phenomenon may originate in fine sandy - silty type of soils subjected to dynamic effects, low plasticity clays and even in soils with gravels based on the magnitude of applied acceleration. The mechanical or chemical soil improvement techniques have been used to prevent this problem. The mixing or grouting operations of sodium polyacrylate, which has a high-water absorption capacity, is one of the chemical soil improvement techniques. The frost behavior of this material, which turns into a gel form when react with the water in the environment, is not known in the permafrost areas. Within this purpose, sandy specimens including 5.00%, 10.00%, 15.00%, and 20.00% sodium polyacrylate gel as well as reference ones, were frozen at -20C° and unconfined compression tests were applied. Moreover, the tests were repeated for additional specimens containing 5.00% bentonite clay by weight. Although the unconfined compressive strength of all samples improved according to the increase in the amount of water with the gel content, about 14.00% lower values were obtained in specimens containing bentonite. On the other hand, the unit strain values of frozen samples without bentonite increased, while reduction observed in samples with bentonite. The viscous structure, that is in gel form inside the soil, dissipates volume increase during the freezing process and prevents the frost heave problem. However, the loss of bearing capacity should be considered in case of insufficient saturation in liquefaction sensitive sandy soils improved with sodium polyacrylate. [ABSTRACT FROM AUTHOR]