Search

Establishing reliable and effective prediction models is a major research priority for air quality parameter monitoring and prediction and is utilized extensively in numerous fields. The sample dataset of air quality metrics often established has missing data and outliers because of certain uncontrollable causes. A broad learning system based on a semi-supervised mechanism is built to address some of the dataset's data-missing issues, hence reducing the air quality model prediction error. Several air parameter sample datasets in the experiment were discovered to have outlier issues, and the anomalous data directly impact the prediction model's stability and accuracy. Furthermore, the correlation entropy criteria perform better when handling the sample data's outliers. Therefore, the prediction model in this paper consists of a semi-supervised broad learning system based on the correlation entropy criterion (CC-SSBLS). This technique effectively solves the issue of unstable and inaccurate prediction results due to anomalies in the data by substituting the correlation entropy criterion for the mean square error criterion in the BLS algorithm. Experiments on the CC-SSBLS algorithm and comparative studies with models like Random Forest (RF), Support Vector Regression (V-SVR), BLS, SSBLS, and Categorical and Regression Tree-based Broad Learning System (CART-BLS) were conducted using sample datasets of air parameters in various regions. In this paper, the root mean square error (RMSE) and mean absolute percentage error (MAPE) are used to judge the advantages and disadvantages of the proposed model. Through the experimental analysis, RMSE and MAPE reached 8.68 μg·m−3 and 0.24% in the Nanjing dataset. It is possible to conclude that the CC-SSBLS algorithm has superior stability and prediction accuracy based on the experimental results. [ABSTRACT FROM AUTHOR]

Estimating the ocean's subsurface thermohaline information from satellite measurements is essential for understanding ocean dynamics and the El Niño phenomenon. This paper proposes an improved double-output residual neural network (DO-ResNet) model to concurrently estimate the subsurface temperature (ST) and subsurface salinity (SS) in the tropical Western Pacific using multi-source remote sensing data, including sea surface temperature (SST), sea surface salinity (SSS), sea surface height anomaly (SSHA), sea surface wind (SSW), and geographical information (including longitude and latitude). In the model experiment, Argo data were used to train and validate the model, and the root mean square error (RMSE), normalized root mean square error (NRMSE), and coefficient of determination (R2) were employed to evaluate the model's performance. The results showed that the sea surface parameters selected in this study have a positive effect on the estimation process, and the average RMSE and R2 values for estimating ST (SS) by the proposed model are 0.34 °C (0.05 psu) and 0.91 (0.95), respectively. Under the data conditions considered in this study, DO-ResNet demonstrates superior performance relative to the extreme gradient boosting model, random forest model, and artificial neural network model. Additionally, this study evaluates the model's accuracy by comparing its estimations of ST and SS across different depths with Argo data, demonstrating the model's ability to effectively capture the most spatial features, and by comparing NRMSE across different depths and seasons, the model demonstrates strong adaptability to seasonal variations. In conclusion, this research introduces a novel artificial intelligence technique for estimating ST and SS in the tropical Western Pacific Ocean. [ABSTRACT FROM AUTHOR]

This paper proposes a short-term forecasting method for high-frequency broadcast Maximum Usable Frequency (MUF) based on Long Short-Term Memory (LSTM) to meet the demand for refined and precise high-frequency broadcast coverage. Based on the existing infrastructure of broadcast and television stations, we established an experimental verification system to collect data for approximately three years. Two links were selected based on data quality: Urumqi to Lhasa and Lanzhou to Lhasa. A short-term forecast of MUF was conducted using the data from these two links. Comparison and analysis were conducted between the forecasting results of our model and those of the REC533 model. Our proposed method outperforms the REC533 forecasting results overall, with a reduction in root mean square error (RMSE) of 0.66 MHz and an improvement in forecast accuracy of 14.77%. The comparison result demonstrates the feasibility and accuracy of our model. [ABSTRACT FROM AUTHOR]

Urban surfaces play a crucial role in shaping the Urban Heat Island (UHI) effect by absorbing and retaining significant solar radiation. This paper explores the potential of high-resolution satellite imagery as an alternative method for characterizing urban surfaces to support UHI mitigation strategies in urban redevelopment plans. We utilized Landsat images spanning the past 40 years to analyze trends in Land Surface Temperature (LST). Additionally, WorldView-3 (WV3) imagery was acquired for surface characterization, and the results were compared with ground truth measurements using the ASD FieldSpec 4 spectroradiometer. Our findings revealed a strong correlation between satellite-derived surface reflectance and ground truth measurements across various urban surfaces, with Root Mean Square Error (RMSE) values ranging from 0.01 to 0.14. Optimal characterization was observed for surfaces such as bituminous membranes and parking with cobblestones (RMSE < 0.03), although higher RMSE values were noted for tiled roofs, likely due to aging effects. Regarding surface albedo, the differences between satellite-derived data and ground measurements consistently remained below 12% for all surfaces, with the lowest values observed in high heat-absorbing surfaces like bituminous membranes. Despite challenges on certain surfaces, our study highlights the reliability of satellite-derived data for urban surface characterization, thus providing valuable support for UHI mitigation efforts. [ABSTRACT FROM AUTHOR]

In the recent past, Andhra Pradesh (AP) has experienced increasing trends in surface air mean temperature (SAT at a height of 2 m) because of climate change. In this paper, we attempt to estimate the SAT using the GFDL-ESM2G (Geophysical Fluid Dynamics Laboratory Earth System Model version 2G), available from the Coupled Model Intercomparison Project Phase-5 (CMIP5). This model has a mismatch with the India Meteorological Department (IMD)'s observations during April and May, which are the most heat-prone months in the state. Hence, in addition to the SAT from the model, the present paper considers other parameters, such as mean sea level pressure, surface winds, surface relative humidity, and surface solar radiation downwards, that have influenced the SAT. Since all five meteorological parameters from the GFDL-ESM2G model influence the IMD's SAT, an artificial neural network (ANN) technique has been used to predict the SAT using the above five meteorological parameters as predictors (input) and the IMD's SAT as the predictand (output). The model was developed using 1981–2020 data with different time lags, and results were tested for 2021 and 2022 in addition to the random testing conducted for 1981–2020. The statistical parameters between the IMD observations and the ANN estimations using GFDL-ESM2G predictions as input confirm that the SAT can be estimated accurately as described in the analysis section. The analysis conducted for different regions of AP reveals that the diurnal variations of SAT in the IMD observations and the ANN predictions over three regions (North, Central, and South AP) and overall AP compare well, with root mean square error varying between 0.97 °C and 1.33 °C. Thus, the SAT predictions provided in the GFDL-ESM2G model simulations could be improved statistically by using the ANN technique over the AP region. [ABSTRACT FROM AUTHOR]

In engineering pulse-jet dust collector applications, the filtration area and injection pressure are chosen mostly based on experience. The peak pressure is tested under different injection pressures and filtration areas controlled by an electromagnetic valve, and then comprehensively analyzes the effects of dust intensity, uniformity, and air consumption on dust cleaning to obtain a better filtration area controlled by an electromagnetic valve and injection pressure. The results show that considering the uniformity and intensity of dust cleaning, the filtration area of 33 m2 under the injection pressure of 0.4 MPa should be preferentially selected, with a standard deviation of 0.246 and a variance of 0.061. The filtration area of 27 m2 under the injection pressure of 0.3 MPa should be preferentially selected considering the unit air consumption, uniformity, and intensity of dust cleaning, the standard deviation of 0.252, and the variance of 0.064. The paper presents a theoretical foundation for selecting the optimal injection pressure and filter area regulated by an electromagnetic valve in pulse-jet dust collector systems. [ABSTRACT FROM AUTHOR]

The physical parameterizations have important influence on model performance in precipitation simulation and prediction; however, previous investigations are seldom conducted at very high resolution over Hebei Province, which is often influenced by extreme events such as droughts and floods. In this paper, the influence of parameterization schemes and analysis nudging on precipitation simulation is investigated using the WRF (weather research and forecasting) model with many sensitivity experiments at the cumulus "gray-zone" resolution (5 km). The model performance of different sensitivity simulations is determined by a comparison with the local high-quality observational data. The results indicate that the WRF model generally reproduces the distribution of precipitation well, and the model tends to underestimate precipitation compared with the station observations. The sensitivity simulation with the Tiedtke cumulus parameterization scheme combined with the Thompson microphysics scheme shows the best model performance, with the highest temporal correlation coefficient (0.45) and lowest root mean square error (0.34 mm/day). At the same time, analysis nudging, which incorporates observational information into simulation, can improve the model performance in precipitation simulation. Further analysis indicates that the negative bias in precipitation may be associated with the negative bias in relative humidity, which in turn is associated with the positive bias in temperature and wind speed. This study highlights the role of parameterization schemes and analysis nudging in precipitation simulation and provides a valuable reference for further investigations on precipitation forecasting applications. [ABSTRACT FROM AUTHOR]

This paper selects the case of the Atlantic hurricane "Michael" in 2018 to evaluate the accuracy of the GOES-16 atmospheric temperature profile during the hurricane and its effect on forecasting. Based on the weather research and forecasting (WRF) model, the assimilation of GOES-16 atmospheric temperature-profile products was achieved by using three-dimensional variational (3DVar) and the ensemble transform Kalman filter/three-dimensional variational (ETKF/3DVAR) hybrid system (Hybrid) systems. And the impact of geostationary satellite GOES-16 atmospheric temperature-profile data assimilation on a hurricane forecast is evaluated. The results show that, during the hurricane, the root mean square errors of the GOES-16 atmospheric temperature profile are all within 2 k at the height of 200–1000 hPa, and the quality of the data is generally good. Assimilating the GOES-16 atmospheric temperature-profile data can indeed effectively improve the analysis increment and improve the prediction results. The assimilation increment obtained by the hybrid system has obvious "flow-dependent" characteristics, which can reasonably improve the initial field of the model. Its temperature increment has an obvious spiral structure, which is in line with the characteristics of the hurricane, and the adjustment of the wind field and geopotential height field is also more beneficial to the development of the hurricane. It has a positive impact on the forecast of track, intensity, and precipitation, and the hybrid system is improved more obviously. In addition, from the RMSE of the analysis field and the forecast field relative to the observation data of different elements, the hybrid system is superior to the 3DVar system. [ABSTRACT FROM AUTHOR]

Accurate prediction of storm surges is crucial for mitigating the impact of extreme weather events. This paper introduces the Bidirectional Attention-based Long Short-Term Memory (LSTM) Storm Surge Architecture, BALSSA, addressing limitations in traditional physical models. By leveraging machine learning techniques and extensive historical and real-time data, BALSSA significantly enhances prediction accuracy. Utilizing a bidirectional attention-based LSTM framework, it captures complex, non-linear relationships and long-term dependencies, improving the accuracy of storm surge predictions. The enhanced model, D-BALSSA, further amplifies predictive capability through a doubled bidirectional attention-based structure. Training and evaluation involve a comprehensive dataset from over 70 typhoon incidents in Macao between 2017 and 2022. The results showcase the outstanding performance of BALSSA, delivering highly accurate storm surge forecasts with a lead time of up to 72 h. Notably, the model exhibits a low Mean Absolute Error (MAE) of 0.0287 m and Root Mean Squared Error (RMSE) of 0.0357 m, crucial indicators measuring the accuracy of storm surge predictions in water level anomalies. These metrics comprehensively evaluate the model's accuracy within the specified timeframe, enabling timely evacuation and early warnings for effective disaster mitigation. An adaptive system, integrating real-time alerts, tropical cyclone (TC) chaser, and prospective visualizations of meteorological and tidal measurements, enhances BALSSA's capabilities for improved storm surge prediction. Positioned as a comprehensive tool for risk management, BALSSA supports decision makers, civil protection agencies, and governments involved in disaster preparedness and response. By leveraging advanced machine learning techniques and extensive data, BALSSA enables precise and timely predictions, empowering coastal communities to proactively prepare and respond to extreme weather events. This enhanced accuracy strengthens the resilience of coastal communities and protects lives and infrastructure from the escalating threats of climate change. [ABSTRACT FROM AUTHOR]

In order to enhance the prediction accuracy and computational efficiency of chaotic sequence data, issues such as gradient explosion and the long computation time of traditional methods need to be addressed. In this paper, an improved Particle Swarm Optimization (PSO) algorithm and Long Short-Term Memory (LSTM) neural network are proposed for chaotic prediction. The temporal pattern attention mechanism (TPA) is introduced to extract the weights and key information of each input feature, ensuring the temporal nature of chaotic historical data. Additionally, the PSO algorithm is employed to optimize the hyperparameters (learning rate, number of iterations) of the LSTM network, resulting in an optimal model for chaotic data prediction. Finally, the validation is conducted using chaotic data generated from three different initial values of the Lorenz system. The root mean square error (RMSE) is reduced by 0.421, the mean absolute error (MAE) is reduced by 0.354, and the coefficient of determination (R2) is improved by 0.4. The proposed network demonstrates good adaptability to complex chaotic data, surpassing the accuracy of the LSTM and PSO-LSTM models, thereby achieving higher prediction accuracy. [ABSTRACT FROM AUTHOR]

Accurate wind speed prediction is significantly important for the full utilization of wind energy resources and the improvement in the economic benefits of wind farms. Because the ensemble forecast takes into account the uncertainty of information about the atmospheric motion, domestic and foreign weather service forecast centers often choose to use the ensemble numerical forecast to achieve the fine forecast of wind speed. However, due to the unavoidable systematic errors of the ensemble numerical forecast model, it is necessary to correct the deviation in the ensemble numerical forecast wind speed. Considering the typical spatio-temporal characteristics of the grid prediction data of the wind field, based on Convolutional Long–Short Term Memory (ConvLSTM) units and attention mechanism, this paper takes the complex and representative North China region as the research area, aiming to reveal the shortcomings of existing deep learning integrated prediction correction models in extracting temporal features of grid prediction data. We propose a new ensemble prediction wind field correction model integrating multi-factor and spatio-temporal characteristics. This model uses reanalyzed land data provided by the European Center for Medium-Range Weather Forecasts as the real data to correct the deviation in the near-surface 10 m wind field data predicted by the regional ensemble numerical prediction model of the China Meteorological Administration. We used the reanalyzed land data provided by the European Centre for Medium-Range Weather Forecasts (ECMWF) as the live data to correct the deviation in the near-surface 10 m wind field data predicted by the regional ensemble numerical forecast model of the China Meteorological Administration (CMA). At the same time, Root Mean Square Error (RMSE) and Mean Absolute Error (MAE) were used as the scoring indicators, and the results of the China Meteorological Administration–Regional Ensemble Prediction System (CMA–REPS) ensemble average, multiple linear regression method correction, Long–Short Term Memory (LSTM) method correction, and U-net (UNET) method correction were compared. Compared with the UNET model method, the experimental results show that when processing the 10 m zonal wind data, 10 m meridional wind data, and 10 m average wind speed data of CMA–REPS 24 h forecasts, the correction results of our model can reduce the RMSE score index by 9.15%, 4.83%, and 7.79%. At the same time, when processing the 48 h and 72 h near-surface 10 m wind field data of the CMA–REPS forecast, our model can improve the prediction accuracy of CMA–REPS near-surface wind forecast data. Therefore, the correction effect of the proposed model in a complex terrain area is evidently better compared to other methods. [ABSTRACT FROM AUTHOR]

The accurate prediction of atmospheric wind speed in near space is of importance for both middle and upper atmospheric scientific research and engineering applications. In order to improve the accuracy of short-term wind speed predictions in near space, this paper proposes a multi-step hybrid prediction method based on the combination of variational modal decomposition (VMD), particle swarm optimization (PSO) and long short-term memory neural networks (LSTM). This paper uses the measurement of wind speed in the height range of 80–88 km at the Kunming site (25.6° N, 103.8° E) for wind speed prediction experiments. The results show that the root mean square error ( R M S E ) and the mean absolute percentage error ( M A P E ) of multi–step wind predictions are less than 6 m/s and 15%, respectively. Furthermore, the proposed VMD–PSO–LSTM method is compared with the traditional seasonal difference autoregressive sliding average model (SARIMA) to investigate its performance. Our analysis shows that the percentage improvement of prediction performance compared to the traditional time series prediction model can reach at most 85.21% and 83.75% in R M S E and M A P E , respectively, which means that the VMD–PSO–LSTM model has better accuracy in the multi-step prediction of the wind speed. [ABSTRACT FROM AUTHOR]

Among the critical global crises curbing world development and sustainability, air quality degradation has been a long-lasting and increasingly urgent one and it has been sufficiently proven to pose severe threats to human health and social welfare. A higher level of model prediction accuracy can play a fundamental role in air quality assessment and enhancing human well-being. In this paper, four types of machine learning models—random forest model, ridge regression model, support vector machine model, extremely randomized trees model—were adopted to predict PM2.5 concentration in ten cities in the Jing-Jin-Ji region of north China based on multi-sources spatiotemporal data including air quality and meteorological data in time series. Data were fed into the model by using the rolling prediction method which is proven to improve prediction accuracy in our experiments. Lastly, the comparative experiments show that at the city level, RF and ExtraTrees models have better predictive results with lower mean absolute error (MAE), root mean square error (RMSE), and higher index of agreement (IA) compared to other selected models. For seasonality, level four models all have the best prediction performances in winter time and the worst in summer time, and RF models have the best prediction performance with the IA ranging from 0.93 to 0.98 with an MAE of 5.91 to 11.68 μg/m3. Consequently, the demonstration of how each model performs differently in each city and each season is expected to shed light on environmental policy implications. [ABSTRACT FROM AUTHOR]

The Philippines is highly vulnerable to multiple climate-related hazards due to its geographical location and weak adaptation measures. Floods are the most catastrophic hazards that impact lives, livelihoods, and, consequently, the economy at large. Understanding the ability of the general circulation models to simulate the observed rainfall using the latest state-of-the-art model is essential for reliable forecasting. Based on this background, this paper objectively aims at assessing and ranking the capabilities of the recent Coupled Model Intercomparison Project Phase 6 (CMIP6) models in simulating the observed rainfall over the Philippines. The Global Precipitation Climatology Project (GPCP) v2.3 was used as a proxy to gauge the performance of 11 CMIP6 models in simulating the annual and rainy-season rainfall during 1980–2014. Several statistical metrics (mean, standard deviation, normalized root means square error, percentage bias, Pearson correlation coefficient, Mann–Kendall test, Theil–Sen slope estimator, and skill score) and geospatial measures were assessed. The results show that that CMIP6 historical simulations exhibit satisfactory effectiveness in simulating the annual cycle, though some models display wet/dry biases. The CMIP6 models generally underestimate rainfall on the land but overestimate it over the ocean. The trend analysis shows that rainfall over the country is insignificantly increasing both annually and during the rainy seasons. Notably, most of the models could correctly simulate the trend sign but over/underestimate the magnitude. The CMIP6 historical rainfall simulating models significantly agree on simulating the mean annual cycle but diverge in temporal ability simulation. The performance of the models remarkably differs from one metric to another and among different time scales. Nevertheless, the models may be ranked from the best to the least best at simulating the Philippines' rainfall in the order GFDL, NOR, ACCESS, ENS, MRI, CMCC, NESM, FIO, MIROC, CESM, TAI, and CAN. The findings of this study form a good basis for the selection of models to be used in robust future climate projection and impact studies regarding the Philippines. The climate model developers may use the documented shortcoming of these models and improve their physical parametrization for better performance in the future. [ABSTRACT FROM AUTHOR]

The wind microclimate plays an important role in architectural design, and computational fluid dynamics is a method commonly used for analyzing the issue. However, due to its high technical difficulty and time-consuming nature, it limits the interaction and exploration between designers and environment performance analyses. To address the issue, scholars have proposed a series of approximation models based on machine learning that have partially improved computational efficiency. However, these methods face challenges in terms of balancing applicability, prediction accuracy, and sample size. In this paper, we propose a method based on the classic Vggnet deep convolutional neural network as the backbone to construct an approximate model for predicting steady-state flow fields in urban areas. The method is trained on a small amount of sample data and can be extended to calculate the wind environment performance. Furthermore, we investigated the differences between geometric representation methods, such as the Boolean network representation and signed distance function, as well as different structure models, such as Vgg-CFD-11, Vgg-CFD-13, Vgg-CFD-16, and Vgg-CFD-19. The results indicate that the model can be trained using a small amount of sample data, and all models generally possess the ability to predict the wind environment. The best performance on the validation set and test set was achieved with an RMSE (Root Mean Square Error) of 0.7966 m/s and 2.2345 m/s, respectively, and an R-Squared score of 0.9776 and 0.8455. Finally, we embedded the best-performing model into an architect-friendly urban comprehensive analysis platform, URBAN NEURAL-CFD. [ABSTRACT FROM AUTHOR]

Prolonged exposure to high concentrations of suspended particulate matter (SPM), especially aerodynamic fine particulate matter that is ≤2.5 μm in diameter (PM2.5), can cause serious harm to human health and life via the induction of respiratory diseases and lung cancer. Therefore, accurate prediction of PM2.5 concentrations is important for human health management and governmental environmental management decisions. However, the time-series processing of PM2.5 concentration based only on a single region and a special time period is less explanatory, and thus, the spatial-temporal applicability of the model is more restricted. To address this problem, this paper constructs a PM2.5 concentration prediction optimization model based on Convolutional Neural Networks-Long Short-Term Memory (CNN-LSTM). Hourly data of atmospheric pollutants, meteorological parameters, and Precipitable Water Vapor (PWV) of 10 cities in the Beijing-Tianjin-Hebei metropolitan area during the period of 1–30 September 2021/2022 were used as the training set, and the PM2.5 data of 1–7 October 2021/2022 were used for validation. The experimental results show that the CNN-LSTM model optimizes the average root mean square error (RMSE) by 25.52% and 14.30%, the average mean absolute error (MAE) by 26.23% and 15.01%, and the average mean absolute percentage error (MAPE) by 35.64% and 16.98%, as compared to the widely used Back Propagation Neural Network (BPNN) and Long Short-Term Memory (LSTM) models. In summary, the CNN-LSTM model is superior in terms of applicability and has the highest prediction accuracy in the Beijing-Tianjin-Hebei metropolitan area. The results of this study can provide a reference for the relevant departments in the Beijing-Tianjin-Hebei metropolitan area to predict PM2.5 concentration and its trend in specific time periods. [ABSTRACT FROM AUTHOR]

In response to the nonlinear fitting difficulty of the traditional weighted average temperature (Tm) modeling, this paper proposed four machine learning (ML)-based Tm models. Based on the seven radiosondes in the Yangtze River Delta region from 2014 to 2019, four forecasting ML-based Tm models were constructed using Light Gradient Boosting Machine (LightGBM), Support Vector Machine (SVM), Random Forest (RF), and Classification and Regression Tree (CART) algorithms. The surface temperature (Ts), water vapor pressure (Es), and atmospheric pressure (Ps) were identified as crucial influencing factors after analyzing their correlations to the Tm. The ML-based Tm models were trained using seven radiosondes from 2014 to 2018. Then, the mean bias and root mean square error (RMSE) of the 2019 dataset were used to evaluate the accuracy of the ML-based Tm models. Experimental results show that the overall accuracy of the LightGBM-based Tm model is superior to the SVM, CART, and RF-based Tm models under different temporal variations. The mean RMSE of the daily LightGBM-based Tm model is reduced by 0.07 K, 0.04 K, and 0.13 K compared to the other three ML-based models, respectively. The mean RMSE of the monthly LightGBM-based Tm model is reduced by 0.09 K, 0.04 K, and 0.11 K, respectively. The mean RMSE of the quarterly LightGBM-based Tm model is reduced by 0.09 K, 0.04 K, and 0.11 K, respectively. The mean bias of the LightGBM-based Tm model is also smaller than that of the other ML-based Tm models. Therefore, the LightGBM-based Tm model can provide more accurate Tm and is more suitable for obtaining GNSS precipitable water vapor in the Yangtze River Delta region. [ABSTRACT FROM AUTHOR]

As the main energy source for thermal power generation, coal generates a large amount of NOx during its incineration in boilers, and excessive NOx emissions can cause serious pollution to the air environment. Selective catalytic reduction denitrification (SCR) selects the optimal amount of ammonia to be injected for denitrification based on the measurement of NOx concentration by the automatic flue gas monitoring system. Since the automatic flue gas monitoring system has a large delay in measurement, it cannot accurately reflect the real-time changes of NOx concentration at the SCR inlet when the unit load fluctuates, leading to problems such as ammonia escape and NOx emission exceeding the standard. In response to these problems, this paper proposes an SCR inlet NOx concentration prediction algorithm based on BMIFS-LSTM. An improved mutual information feature selection algorithm (BMIFS) is used to filter out the auxiliary variables with maximum correlation and minimum redundancy with NOx concentration, and reduce the coupling and dimensionality among the variables in the data set. The dominant and auxiliary variables are then fed together into a long short-term memory neural network (LSTM) to build a prognostic model. Simulation experiments are conducted using historical operation data of a 300 MW thermal power unit. The experimental results show that the algorithm in this paper reduces the average relative error by 3.45% and the root mean square error by 1.50 compared with the algorithm without auxiliary variable extraction, which can accurately reflect the real-time changes of NOx concentration at the SCR inlet, solve the problem of delay in NOx concentration measurement, and reduce the occurrence of atmospheric pollution caused by excessive NOx emissions. [ABSTRACT FROM AUTHOR]

This paper presents a method for reconstructing the historical hourly concentrations of Particulate Matter 2.5 (PM2.5) over the Kathmandu Valley from 1980 to the present. The method uses a machine learning model that is trained using PM2.5 readings from the US Embassy (Phora Durbar) as a ground truth, and the meteorological data from the Modern-Era Retrospective Analysis for Research and Applications v2 (MERRA2) as input. The Extreme Gradient Boosting (XGBoost) model acquires a credible 10-fold cross-validation (CV) score of ~83.4%, an r2-score of ~84%, a Root Mean Square Error (RMSE) of ~15.82 µg/m3, and a Mean Absolute Error (MAE) of ~10.27 µg/m3. Further demonstrating the model's applicability to years other than those for which truth values are unavailable, the multiple cross-tests with an unseen data set offered r2-scores for 2018, 2019, and 2020 ranging from 56% to 67%. The model-predicted data agree with true values and indicate that MERRA2 underestimates PM2.5 over the region. It strongly agrees with ground-based evidence showing substantially higher mass concentrations in the dry pre- and post-monsoon seasons than in the monsoon months. It also shows a strong anti-correlation between PM2.5 concentration and humidity. The results also demonstrate that none of the years fulfilled the annual mean air quality index (AQI) standards set by the World Health Organization (WHO). [ABSTRACT FROM AUTHOR]

Given the increasing impact of extreme rainfall and flooding on human life, studying and predicting changes in atmospheric water vapor (AWV) becomes particularly important. This paper analyzes the moderate-resolution imaging spectroradiometer (MODIS) data of the East Asian region from January 2003 to February 2023. The AWV data are examined in the time and frequency domain using methods such as empirical orthogonal function (EOF), Mann–Kendall (MK) analysis, and others. Additionally, four prediction models are applied to forecast the monthly average AWV data for the next year. The accuracy of these models is evaluated using metrics such as mean square error (MSE), mean absolute error (MAE), root mean square error (RMSE), and coefficient of determination (R2). The findings reveal several key insights: (1) The East Asian region exhibits highly variable seasonal variability in AWV, with identified mutation points after the MK test. (2) Spatial analysis shows high AWV data in the southern coastal areas of China, Thailand, Myanmar, Nansha Islands, and other regions during winter, while the Qinghai-Tibet Plateau region experiences low AWV during summer. (3) The first mode obtained through EOF decomposition contributes over 60% of the variance. Analysis of this mode reveals an increasing trend in AWV data for regions such as the Indian peninsula, Mongolia, and central and northeastern China over the past nine years. Conversely, the Bay of Bengal, Spratly Islands, eastern coast, and certain areas display a decreasing trend. (4) Employing the ensemble empirical mode decomposition (EEMD), the study identifies AWV data as a non-stationary series with an overall decreasing trend from 2003 to 2022. The filtered AWV series undergoes fast Fourier transform (FFT), uncovering periodicities of 2.6 years, 5 years, and 19 years. (5) Among the four forecasting models compared, the seasonal autoregressive integrated moving average model (SARIMA) demonstrates superior performance with the smallest MSE of 0.00782, MAE of 0.06977, RMSE of 0.08843, and the largest R2 value of 0.98454. These results clearly indicate that the SARIMA model provides the best fit. Therefore, the SARIMA forecasting model can be effectively utilized for forecasting AWV data, offering valuable insights for studying weather variability. [ABSTRACT FROM AUTHOR]

CO2 is the main greenhouse gas. Urban spatial development, land use, and so on may be affected by CO2 and climate change. The main questions studied in this paper are as follows: What are the drivers of CO2 emissions of expanding megacities? How can they be analyzed from different perspectives? Do the results differ for megacities at different stages of development? Based on the XGBoost model, this paper explored the complex factors affecting CO2 emissions by using data of four Chinese megacities, Beijing, Tianjin, Shanghai, and Chongqing, from 2003 to 2017. The main findings are as follows: The XGBoost model has better applicability and accuracy in predicting carbon emissions of expanding megacities, with root mean square error (RMSE) as low as 0.036. Under the synergistic effect of multiple factors, population, land size, and gross domestic product are still the primary driving forces of CO2 emissions. Population density and population become more important in the single-factor analysis. The key drivers of CO2 emissions in megacities at respective developmental stages are different. This paper provides methods and tools for accurately predicting CO2 emissions and measuring the critical drivers. Furthermore, it could provide decision support for megacities to make targeted carbon-emission-reduction strategies based on their own developmental stages. [ABSTRACT FROM AUTHOR]

GNSS single-frequency occultation processing technology has the advantage of simple instrumentation, but it is not clear about the accuracy of the Beidou-based single-frequency occultation processing. This paper verifies the single-frequency occultation processing algorithm of the BeiDou navigation system (BDS) and analyzes its accuracy based on occultation observation data from the FY3E satellite. The research aimed to verify the single-frequency ionospheric relative total electron content (relTEC), analyze the accuracy of the reconstructed second frequency B 3 ∗ 's excess phase Doppler, and analyze the accuracy of the refractive index products. Results: (1) As for relTEC and excess phase Doppler, the correlation coefficient between single-frequency occultation processing and dual-frequency occultation processing is greater than 0.95. (2) The relative average deviations of the excess phase Doppler of B 3 ∗   are mostly less than 0.2%, and the relative standard deviations are mostly around 0.5%. (3) The bias index and root mean square index of single/dual-frequency inversion have good consistency compared with ERA5 data. All the results show that the single- and dual-frequency inversion refractive index products have comparable accuracies, and the accuracy of the standard deviation of single-frequency inversion refractive index products over 25 km being slightly lower than that of dual-frequency inversion refractive index products. [ABSTRACT FROM AUTHOR]

Nitrogen dioxide (NO2) is an important precursor of atmospheric aerosol. Forecasting urban NO2 concentration is vital for effective control of air pollution. This paper proposes a hybrid deep learning model for predicting daily average NO2 concentrations on the next day, based on atmospheric pollutants, meteorological data, and historical data during 2014 to 2020 in five coastal cities of Shandong peninsula, northern China. A random Forest (RF) algorithm was used to select input variables to reduce data dimensionality trained by the sequence to sequence (Seq2Seq) the model and describe how the Seq2Seq model understands each predictor variable. The hybrid model combining an RF with Seq2Seq network (RF-S2S) was evaluated and achieved a Pearson's correlation coefficient of 0.93, a Nash–Sutcliffe coefficient (NS) of 0.79, a Root Mean Square Error (RMSE) of 5.85 µg/m3, a Mean Absolute Error (MAE) of 4.50 µg/m3, and a Mean Absolute Percentage Error (MAPE) of 20.86%. Feature selection by an RF model improves the performance of the Seq2Seq model, reducing errors by 19.7% (RMSE), 20.3% (MAE), and 29.3% (MAPE), respectively. Carbon monoxide (CO) and PM10 are two common, important features influencing the prediction of NO2 concentrations in coastal areas of northern China. The results of RF-S2S models can capture general trends and disruptions more accurately than can long-short term memory (LSTM) models with and without feature selection. The decreasing tendency of NO2 from 2014 to 2020 illustrated by the empirical mode decomposition (EMD) method is one important obstacle to improving the RF-S2S prediction accuracy. An EMD-based RF-S2S model could help to perform the short-term forecast of NO2 concentrations efficiently. [ABSTRACT FROM AUTHOR]

Methane (CH4) is the second-largest greenhouse gas emitted by human activity and natural sources after carbon dioxide (CO2). Its relatively short lifetime in the atmosphere (about 12 years) means that we can mitigate the human impacts of climate change in a relatively short period of time by reducing CH4 emissions. The creation of CH4 emissions management policies can be based on the distribution maps of surface CH4 concentration that are in large-scale and at high-resolution. The estimate of CH4 emissions with broad coverage are provided by currently extensively used satellite data supplemented with data from model simulations. However, it is at low spatial resolution. In this paper, through the combination of atmospheric CH4 observations from the TROPOMI sensor and wind data from the ECMWF global reanalysis, a straightforward divergence method is proposed to estimate the surface CH4 emissions in China from March 2019 to September 2022 at a resolution of 7 km × 7 km. This method was compared with the average annual CH4 emissions of Emissions Database for Global Atmospheric Research (EDGARv7.0), and the Root Mean Square Error (RMSE) is 2.53 kg/km2/h and within error envelop (EE) is 72.93%, which represents the proportion of reliable values under certain uncertain conditions. We estimated that the average annual CH4 emissions in China from 2019 to 2022 is 81 Tg, with the lowest emissions in 2021 (75 Tg) due to the impact of COVID-19. In 2021, the largest anthropogenic emissions in China are from agriculture, energy activities and livestock, accounting for 28% (20.8 Tg), 25% (18.9 Tg) and 19% (13.9 Tg) of total emissions, respectively, while wetlands, as the largest natural source, produce 14% (10.5 Tg) of CH4 emissions. [ABSTRACT FROM AUTHOR]

The surface soil moisture over the Qinghai–Tibet Plateau (QTP) has an important impact on the weather and climate of East Asia. Under climate warming, the imbalance of solid–liquid water of QTP has become a research hotspot, but the surface soil moisture dynamics over QTP are not clear owing to the lack of precise measurements over a large scale. In this paper, the quality of gridded surface soil moisture products including CSSPv2 high-resolution (6 km) simulation, ESA CCI satellite retrieval, ERA5 land-atmosphere coupled reanalysis, and GLDAS2.1 land reanalysis products (Noah, Catchment, VIC) is analyzed over QTP by comparison with the in situ measurements at 140 stations during 2009–2017. We find that the CSSPv2 product shows a higher correlation than the global satellite and reanalysis products, with correlation increased by 7.7%–115.6%. The root mean squared error of the CSSPv2 product is lower than that of other products, with the error decreased by 13.4%–46.3%. The triple collocation analysis using high-resolution simulation, global reanalysis, and satellite retrieval products over the entire plateau shows that the error of CSSPv2 is the lowest, followed by ESA CCI, while ERA5 is the highest. The soil moisture products of ESA CCI, ERA5, and CSSPv2 all show an increasing trend from April to September of 2009 to 2017, with wetting in the west and drying in the east. This study indicates that the CSSPv2 high-resolution surface soil moisture product has better performance over QTP than other global products, and the global satellite and reanalysis products may overestimate the surface soil moisture dynamics. [ABSTRACT FROM AUTHOR]

In this paper, the average monthly temperature of the Karachi region, Pakistan, has been modelled. The time period of the procured dataset is from January 1989 to December 2018. The Autoregressive Integrated Moving Average (ARIMA) modelling technique in conjunction with the Box–Jenkins approach has been applied to forecast the average monthly temperature of the study area. A total of 83.33% of the trained dataset is used for construction of the model, and the remaining 16.67% of the dataset is used for the validation of the model. The best-fitted model is identified as ARIMA (2, 1, 4), generated on the basis of minimum values of the Akaike Information Criterion (AIC) and Bayesian Information Criterion (BIC) procedures. The accuracy parameters considered are Root Mean Square Error (RMSE) and Mean Absolute Error (MAE). Both parameters show that the model is 98.152% and 98.413% accurate, respectively. In addition, the Autoregressive Conditional Heteroscedasticity-Lagrange Multiplier (ARCH-LM) test has been conducted to check the presence of heteroscedasticity in the residuals of the identified model. This test shows no heteroscedasticity present in the residual series. By means of Autocorrelation Function (ACF) and Partial Autocorrelation Function (PACF) plots, the most appropriate orders of the ARIMA model are determined and evaluated. The model has been employed to investigate the time series variables' precise impact on the scale of the regional warming scenario. Accordingly, the created model can help in determining future strategies related to weather conditions in the Karachi region. From the forecast result, it is found that the average temperature seems to show an increasing trend. Such an increasing trend can potentially upset the weather conditions and economic activities of the coastal area of Pakistan. [ABSTRACT FROM AUTHOR]

Accurate prediction of PM2.5 concentration is one of the key tasks of air pollution assessment, early warning, and treatment. In this paper, four monitoring sites were arranged in Jiangbei New District of Nanjing City, China. The environmental parameters such as PM2.5/PM10 concentration, temperature, and humidity were monitored from January to February 2020. A gated recurrent unit (GRU) network based on the PM2.5 concentration prediction model was established to predict PM2.5 concentration. The mean relative error (MRE), root mean square error (RMSE), and Pearson correlation coefficient were selected as the evaluation criteria for the accuracy of the GRU model. The data set was divided into a training set, a test set and a validation set at a ratio of 7:2:1, and the GRU model was used to predict the hourly value of PM2.5 concentration in the next week. The prediction results show that the Pearson correlation coefficients between the predicted values and the monitored values of the four monitoring sites have reached more than 0.9, reflecting a strong correlation. The relative average errors are around 10%. The GRU model prediction of NJAU (Nanjing Agricultural University)-Pukou Campus Site is the most accurate, and the correlation coefficient, MRE, and RMSE are 0.970, 7.85%, and 9.6049, respectively, reflecting the good prediction performance of the model. Therefore, this research supports the prediction of air quality in different cities and regions, so people can take protective measures in advance and reduce the damage caused by air pollution to human bodies. [ABSTRACT FROM AUTHOR]

Clouds play a crucial role in Earth's climate system by modulating radiation fluxes via reflection and scattering, and thus the slightest variation in their spatial coverage significantly alters the climate response. Until now, due to the sparse distribution of advanced observation stations, large uncertainties in cloud climatology remain for many regions. Therefore, this paper estimates total cloud cover (TCC) by using sunshine duration measured in different tropical climates in Ghana. We used regression tests for each climate zone, coupled with bias correction by cumulative distribution function (CDF) matching, to develop the estimated TCC dataset from nonlinear empirical equations. It was found that the estimated percentage TCC, 20.8–84.7 ± 3.5%, compared well with station-observed TCC, 21.9–84.4 ± 3.5%, with root mean square errors of 1.08–9.13 ± 1.8% and correlation coefficients of 0.87–0.99 ± 0.03. Overall, spatiotemporal characteristics were preserved, establishing that denser clouds tended to prevail mostly over the southern half of the forest-type climate during the June–September period. Moreover, the model and the observations show a non-normality, indicating a prevalence of above-average TCC over the study area. The results are useful for weather prediction and application in meteorology. [ABSTRACT FROM AUTHOR]

Satellite-based precipitation products (SPPs) provide valuable precipitation information for various applications. Their performance, however, varies significantly from region to region due to various data sources and production processes. This paper aims to evaluate four selected SPPs (Precipitation Estimation from Remotely Sensed Information using Artificial Neural Networks Climate Data Record (PERSIANN-CDR), Multi-Source Weighted-Ensemble Precipitation (MSWEP), Gauge-adjusted Global Satellite Mapping of Precipitation (GSMAP-gauge), and Global Precipitation Measurement (GPM)) over mainland China from 2016 to 2019. Both conventional statistical indicators (e.g., correlation coefficients (CC), root mean square error (RMSE), mean absolute error (MAE), relative bias (RB), and Nash–Sutcliffe efficiency (NSE)) and categorical indicators (probability of detection (POD), probability of true detection (POTD), false-alarm rate (FAR), and critical success index (CSI)) are used for quantitative analysis. The results show that: (1) GSMAP-gauge and GPM perform best in reproducing the spatial distribution pattern of precipitation over mainland China, whereas SPPs generally underestimate summer precipitation with a high frequency of no-rain cases. (2) MSWEP has the best capability for recording precipitation events, although some parts of northern China exhibit abnormal overestimations for winter precipitation. (3) All SPPs, especially the PERSIANN-CDR, significantly underestimate the precipitation in the mountainous areas of southwestern China. (4) The GSMAP-gauge and GPM outperformed the other two of the four SPPs, in terms of the probability density function of daily precipitation for cases (PDFc) and the probability density function of daily precipitation for volume (PDFv). Generally, PERSIANN-CDR shows the poorest performance when compared to the other three products. The product's algorithm for estimating heavy precipitation and mountainous precipitation needs further improvement. [ABSTRACT FROM AUTHOR]

The air environment (e.g., high concentration of carbon dioxide) in a pig house will affect the health conditions and growth performance of the pigs, and the quality of pork as well. In order to reduce the cumulative concentration of carbon dioxide in the pig house, the prediction model was established by the deep learning method to predict the changes of the carbon dioxide cumulative concentration in a pig house. This model will also be used for the real-time monitoring and adjustment of the concentration of carbon dioxide of the pig house. The experiment was designed to collect environmental parameters (e.g., temperature, humidity, wind speed, and carbon dioxide concentration) data in the pig house for several months. The ensemble empirical mode decomposition–gated recurrent unit (EEMD–GRU) prediction model was established in the prediction of carbon dioxide concentration in the pig house. The results show that compared with the other models, the prediction accuracy of the EEMD–GRU model is the highest, and the root mean square error (RMSE), mean absolute error (MAE), mean absolute percentage error (MAPE), and r-squared (R2) of carbon dioxide concentration in autumn and winter are 123.2 ppm, 88.3 ppm, 3.2%, and 0.99, respectively. The RMSE, MAE, MAPE, and R2 for carbon dioxide concentration are 129.1 ppm, 93.2 ppm, 5.9%, and 0.76 in spring and summer. The prediction model proposed in this paper can effectively predict the concentration of carbon dioxide in the pig house and provide effective help for the precise control of the pig house environment. [ABSTRACT FROM AUTHOR]

In this paper, the accuracy of wave parameters of the European Centre for Medium-Range Weather Forecasting Reanalysis v5 (ERA5) in the South China Sea (SCS) is systematically examined with field measured data of two buoys at offshore sites and a subsea-based platform at a nearshore site, which has a total observational period of nearly three years. It is suggested that the wave parameters provided by ERA5, such as significant wave height (Hs) and mean wave period (Tm), are in good agreement with the observational data of the three sites. Compared with the in situ data, the correlation coefficient of ERA5 Hs is in the range of 0.87–0.93, and the root mean square error is only in the range of 0.22–0.57 m. The error of standard deviation does not exceed 0.29 m and is even as low as 0.04 m at two sites. The wave propagation directions of the ERA5 and in situ data are also basically the same. However, when the data are applied in engineering, some wave parameters extracted from ERA5 may deviate from the measured statistics. It is possible to significantly overestimate the average duration of a particular Hs. Further analysis shows that the possible errors of ERA5 wave parameters may be due to insufficient description of topographic conditions, which shows that the error value changes obviously with the wave direction. The results preliminarily confirm the validity of ERA5 data in the SCS, but also indicate that it is necessary to calibrate and validate the data adequately when applying the global model and its reanalysis data to specific ocean areas. [ABSTRACT FROM AUTHOR]

This paper examines the diurnal cycle of precipitation (DCP) over Lake Titicaca basin (LTb) during the summertime months based on the high spatial–temporal resolution (8 × 8 km2 and hourly) estimates of the Climate Prediction Center Morphing technique (CMORPH). This analysis was carried out using observations from rain gauges (RgSENAMHI) as a reference for the period 2002 to 2013. The accuracy of the CMORPH product was tested with graphical comparisons and several statistical metrics, such as correlation coefficient, bias, and root mean square error. Spatial maps of these metrics and of the diurnal cycle were developed to assess the spatial dependency in the CMORPH accuracy over the LTb. On average, 43% of the total RgSENAMHI variation was explained by the CMORPH. The correlation between the CMORPH and RgSENAMHI amounts was positive over the southeastern and northern LTb and negative in the central and southern LTb. An underestimation bias was observed over most of the LTb areas, and an overestimation bias was observed at some stations (e.g., Lagunillas, Isla Suana, and Desaguadero stations). The total bias decreased when approaching the lake attaining its minimum value over the mountains consistent with previous studies. Overall, the CMORPH was able to capture the spatial patterns of rainfall over the LTb. Over the surrounding lake area, the plateau, and high mountain areas, precipitation peaks were in the late afternoon, while over low areas, such as the valleys and Lake Titicaca, it peaked around midnight to early morning. This result suggests that the DCP is closely related to the local circulation resulting from a response due to solar radiation and the complex orography. On the other hand, the high resolution CMORPH technique can depict finer regional details, such as the less coherent phase pattern over a few regions. [ABSTRACT FROM AUTHOR]

The concentration series of PM2.5 (particulate matter ≤ 2.5 μm) is nonlinear, nonstationary, and noisy, making it difficult to predict accurately. This paper presents a new PM2.5 concentration prediction method based on a hybrid model of complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) and bi-directional long short-term memory (BiLSTM). The new method was applied to predict the same kind of particulate pollutant PM10 and heterogeneous gas pollutant O3, proving that the prediction method has strong generalization ability. First, CEEMDAN was used to decompose PM2.5 concentrations at different frequencies. Then, the fuzzy entropy (FE) value of each decomposed wave was calculated, and the near waves were combined by K-means clustering to generate the input sequence. Finally, the combined sequences were put into the BiLSTM model with multiple hidden layers for training. We predicted the PM2.5 concentrations of Seoul Station 116 by the hour, with values of the root mean square error (RMSE), the mean absolute error (MAE), and the symmetric mean absolute percentage error (SMAPE) as low as 2.74, 1.90, and 13.59%, respectively, and an R2 value as high as 96.34%. The "CEEMDAN-FE" decomposition-merging technology proposed in this paper can effectively reduce the instability and high volatility of the original data, overcome data noise, and significantly improve the model's performance in predicting the real-time concentrations of PM2.5. [ABSTRACT FROM AUTHOR]

Global reanalysis dataset estimations of climate variables constitute an alternative for overcoming data scarcity associated with sparsely and unevenly distributed hydrometeorological networks often found in developing countries. However, reanalysis datasets require detailed validation to determine their accuracy and reliability. This paper evaluates the performance of MERRA2 and ERA5 regarding their monthly rainfall products, comparing their areal precipitation averages with estimates based on ground measurement records from 49 rain gauges managed by the Institute of Hydrology, Meteorology, and Environmental Studies (IDEAM) and the Thiessen polygons method in the Sinu River basin, Colombia. The performance metrics employed in this research are the correlation coefficient, the bias, the normalized root mean square error (NRMSE), and the Nash–Sutcliffe efficiency (NSE). The results show that ERA5 generally outperforms MERRA2 in the study area. However, both reanalyses consistently overestimate the monthly averages calculated from IDEAM records at all time and spatial scales. The negative NSE values indicate that historical monthly averages from IDEAM records are better predictors than both MERRA2 and ERA5 rainfall products. [ABSTRACT FROM AUTHOR]

The paper presents the results of a national radon survey conducted in the context of the Republic of Moldova. The study included about 2500 homes of different types, located in urban and rural localities in different areas of the country. The RADTRAK2 detectors kindly provided by the RADONOVA laboratory, Uppsala, Sweden, for the MOL9007 project funded by the International Atomic Energy Agency (IAEA) have been used. The exposure period was 90 days. The measured radon concentrations are the following: the average (±standard deviation) 252.8 ± 215.9 Bq/m3; the range (minimum–maximum) 10–1480 Bq/m3; the median 200 Bq/m3 and the geometric mean (± geometric standard deviation) 158.5 ± 3.0 Bq/m3. The results of the study allowed mapping indoor radon and identifying localities with increased radon concentrations. In order to reduce the high radon concentrations in places recording >300 Bq/m3, appropriate measures have been proposed according to the legislation in force. The cluster analysis showed positive links between the radon concentration in dwellings and the incidence of respiratory diseases, especially the bronchopulmonary cancer in the country. [ABSTRACT FROM AUTHOR]