Search

The intelligent control of precision planting can detect and regulate the operation quality of the planter in real time, which plays an important role in improving the operation quality of the planter and the yield of the corn. In this paper, the control system of a corn precision planter is designed to realize the operating quality monitoring and electric driving of the seed-metering device. The planting quality is calculated by the time interval between the neighboring falling seeds, instead of the plant spacing, to improve the operational efficiency of the system. At the same time, the forward speed of the planter is obtained by radar, which is used to accurately match the speed of the seed-metering device with the forward speed of the planter. The velocity error of the radar is analyzed, and the relevant relationship of the radar output frequency and forward speed is established. Comparative test results of this system and the JPS-12 test bench show that the detection performance of the system is reliable, and the maximum detection error of the quality parameters is less than 2.88%. Field experiments were carried out to verify the operational performance of the control system. Two speed sensors, radar and GPS, were chosen to study the effect of speed measuring on the performance of the control system. We found that speed measuring has a significant effect on planting performance. The qualified parameters of radar were significantly higher than those of GPS, at a forward speed of 6–12 km/h. The qualification feeding index (QFI) of radar was 0.51%, 0.67%, and 2.05% higher than that of GPS at speeds of 6, 8, 10, and 12 km/h. The precision index (PREC) of radar was 17.60%, 5.44%, 16.81%, and 17.30% lower than that of GPS. Therefore, the control system based on the radar speed measurement developed in this paper can significantly improve the operating quality of the planter. [ABSTRACT FROM AUTHOR]

The lack of high-spectral and high-resolution remote sensing data is impeding the differentiation of various fruit tree species that share comparable spectral and spatial features, especially for evergreen broadleaf trees in tropical and subtropical areas. Here, we propose a novel decision tree approach to map the spatial distribution of fruit trees at a 10 m spatial resolution based on the growth stage features extracted from Sentinel-1A (S-1A) time-series synthetic aperture radar (SAR) data. This novel method was applied to map the spatial distribution of fruit trees in Maoming City, which is known for its vast cultivation of fruit trees, such as litchi, citrus, and longan. The results showed that the key to extracting information on the distribution of fruit trees lies in the fact that the fruit ripening and expansion period attenuates the information on the vegetation of fruit trees, a characteristic of the reproductive period. Under VH polarization, different fruit tree growth stage traits were more separable and easier to distinguish. The optimal features, such as H v (high valley value of the 14 May, 26 May, and 7 June SAR data), T b (difference between the 7 June and 14 January SAR data), Cr (high valley value of the 13 July, 25 July, and 6 August SAR data), and L o (high valley value of the 23 September, 17 October, and 11 November SAR data), were constructed based on the optimal window. The thresholds for these features were set to 1, 1, 1.5, and 1, respectively. The classification model can effectively distinguish different fruit trees and extract distribution information with overall accuracy (OA) of 90.34% and a Kappa coefficient of 0.84. The proposed method extracts the spatial distribution information of different fruit trees more accurately and provides a reference for the extraction of more tropical and subtropical species. [ABSTRACT FROM AUTHOR]

South China is dominated by mountainous agriculture and croplands that are at risk of flood disasters, posing a great threat to food security. Synthetic aperture radar (SAR) has the advantage of being all-weather, with the ability to penetrate clouds and monitor cropland inundation information. However, SAR data may be interfered with by noise, i.e., radar shadows and permanent water bodies. Existing cropland data derived from open-access landcover data are not accurate enough to mask out these noises mainly due to insufficient spatial resolution. This study proposed a method that extracted cropland inundation with a high spatial resolution cropland mask. First, the Proportional–Integral–Derivative Network (PIDNet) was applied to the sub-meter-level imagery to identify cropland areas. Then, Sentinel-1 dual-polarized water index (SDWI) and change detection (CD) were used to identify flood area from open water bodies. A case study was conducted in Fujian province, China, which endured several heavy rainfalls in summer 2022. The result of the Intersection over Union (IoU) of the extracted cropland data reached 89.38%, and the F1-score of cropland inundation achieved 82.35%. The proposed method provides support for agricultural disaster assessment and disaster emergency monitoring. [ABSTRACT FROM AUTHOR]

Alfalfa is one of the most widely cultivated perennial legume crops used as feedstock for animals. Efficiently estimating alfalfa yield and quality traits before harvesting is critical for the decision-making process regarding precision management activities and harvesting time to ensure high profitability. Satellite-based radar is a powerful tool in remote sensing for crop monitoring because it provides high-quality data regardless of weather conditions. Therefore, this study aims to investigate the potential use of satellite radar features and environmental factors in estimating alfalfa yield and quality. Alfalfa yield and quality traits, including dry matter yield (DMY), crude protein (CP), neutral detergent fiber (NDF), NDF digestibility (NDFD), and acid detergent fiber (ADF), were collected over 16 alfalfa fields from 2016 to 2021, leading to 126 samples in total. Sentinel-1 radar backscattering coefficients and environmental factors were collected for all the fields across all growing seasons. Five commonly used machine learning models were established to estimate each alfalfa trait separately. The results show that the Extreme Gradient Boosting model consistently performed the best for all alfalfa traits. The accuracy of the DMY estimates is acceptable, with an average R2 of 0.67 and an RMSE of 0.68 tons/ha. The best result for estimating CP was an average R2 of 0.70 and an RMSE of 1.63% DM. In estimating alfalfa fiber indicators (i.e., ADF, NDF, and NDFD), we achieved the highest average R2 values of 0.54, 0.62, and 0.56, respectively. Overall, this study demonstrated the potential use of environmental factors for alfalfa yield and quality estimation in-field before harvesting. However, the Sentinel-1 radar backscattering coefficients did not make significant contributions to improving the estimation performance, compared to the environmental factors. [ABSTRACT FROM AUTHOR]

One of the world's major agricultural crops is rice (Oryza sativa), a staple food for more than half of the global population. In this research, synthetic aperture radar (SAR) and optical images are used to analyze the monthly dynamics of this crop in the lower Utcubamba river basin, Peru. In addition, this study addresses the need to obtain accurate and timely information on the areas under cultivation in order to calculate their agricultural production. To achieve this, SAR sensor and Sentinel-2 optical remote sensing images were integrated using computer technology, and the monthly dynamics of the rice crops were analyzed through mapping and geometric calculation of the surveyed areas. An algorithm was developed on the Google Earth Engine (GEE) virtual platform for the classification of the Sentinel-1 and Sentinel-2 images and a combination of both, the result of which was improved in ArcGIS Pro software version 3.0.1 using a spatial filter to reduce the "salt and pepper" effect. A total of 168 SAR images and 96 optical images were obtained, corrected, and classified using machine learning algorithms, achieving a monthly average accuracy of 96.4% and 0.951 with respect to the overall accuracy (OA) and Kappa Index (KI), respectively, in the year 2019. For the year 2020, the monthly averages were 94.4% for the OA and 0.922 for the KI. Thus, optical and SAR data offer excellent integration to address the information gaps between them, are of great importance to obtaining more robust products, and can be applied to improving agricultural production planning and management. [ABSTRACT FROM AUTHOR]