Search

Polymer networks usually have many entanglements as well as a finite extensibility due to the uncrossability and the full stretching of the network chains. In this paper, the nonaffine model proposed by Davidson and Goulbourne is adopted to characterize the influence of entanglements and finite extensibility of the polymer chains on the mechanical behavior of hydrogels. The Davidson-Goulbourne model only contains three material parameters and has a simpler mathematical form than the Edwards-Vilgis slip-link model, which is the only model that has been adopted to characterize the influence of entanglements on the swelling deformation of polymeric gels so far. Some benchmark problems such as free swelling, constrained swelling, uniaxial tension, equibiaxial tension in the immersed state and uniaxial compression in the isolated state are analyzed, respectively, based on the new constitutive equations. The results show that entanglements as well as chain extensibility have important influences on the mechanical response of hydrogels. [ABSTRACT FROM AUTHOR]

A magneto-mechanical-thermal model based on a domain rotation mechanism is developed in this paper. An energy distribution parameter related to prestress and temperature is induced, which can be determined by simple experiments. Magnetization and magnetostriction of Terfenol-D at different temperatures and prestresses are calculated and estimated, which are consistent with experiments. The model can be applied to estimate prestress effects to magnetization. The results show that compressive prestress can increase to maximum using temperature of giant magnetostrictive materials. [ABSTRACT FROM AUTHOR]

A description of brick/block masonry by continua equivalent to discrete systems made of blocks of different geometry and texture is proposed in this paper. Here, the reasons for the selection of a micropolar continuum with respect to the classical continuum are discussed. As recent research in various micromorphic multifield formulations shows, the problem of the choice of the most appropriate continuum to model masonry mechanical behavior is still open, and the advantages of non-classical continuum modeling are not yet completely ascertained. Earlier analyses performed on masonry panels in the presence of load and geometrical singularities pointed out the significant role of the additional degree of freedom of the micropolar continuum (microrotation) and of its gradient. The present study aims to expand the investigation into the consequences of changes in blocks' shape, size and arrangement on the response of block masonry panels under shear forces. This analysis points out the greater effectiveness of micropolar models in capturing the gross structural response of masonry, with respect to the classical modeling. The cases analyzed herein show that apart from the very peculiar case of orthotetragonal symmetry, not only the gradient of microrotation but also the relative rotation between the local rigid rotation and the microrotation, to which relevant non-symmetric strains correspond, are predominant in the majority of the performed numerical tests. Models lacking in these strain measures are therefore inappropriate. The results obtained, ascertained by analyses performed on discrete block assemblies, point out that the micropolar continuum provides a proper description of the masonry behavior. Moreover, the differences between micropolar and classical models remain when the internal lengths vanish. [ABSTRACT FROM AUTHOR]

This paper presents a numerical method to model a general system containing cracks and voids in an infinite elastic plate under remote cyclic loads. By extending Bueckner's principle suited for a crack to a general system containing cracks and voids, the original problem is divided into a homogeneous problem (the one without cracks and voids) subjected to remote loads and a void-crack problem in an unloaded body with applied tractions on the surfaces of cracks and voids. Thus, the results in terms of the stress intensity factors can be calculated by considering the latter problem, which is analyzed easily by using the hybrid displacement discontinuity method (a boundary element method). Further, a fatigue growth technique of a mixed-mode crack is combined with the numerical approach to simulating a void-crack interaction problem under cyclic loads. Test examples are included to illustrate that the numerical method is very simple and effective for analyzing a void-crack interaction problem. [ABSTRACT FROM AUTHOR]