Search

User expects his weapon to be light and reliable and to perform multiple times firing per unit time at the same time. In today's technology, the maximum number of firings can be made per unit time with steel barreled weapons, but in composite barrels; many problems occur due to overheating, strength and reliability. Meeting these opposite demands is an engineering problem. In this study, the design of a composite‐steel combination light gun barrel is studied. Firstly, pressure distribution through the barrel has been calculated using Vallier‐Heydenreich method. According to the calculations, analysis has been conducted using both steel barrel and composite barrel. After the analysis, a composite barrel has been manufactured and testing has been conducted on an all‐steel barrel and the manufactured composite barrel. Composite is carbon fiber and resin is epoxy resin. In composite material, carbon fiber is preferred at the rates of 50% and 60%, the material of the steel barrel is AISI 416R stainless steel. The manufactured steel barrels have the same outer diameter but different wall thickness ratios, firing tests were conducted in such a way that the number of shots per unit time was the same. Highlights: Stress distribution within a gun barrel was calculated using Vallier‐Heydenreich method.Design and finite element analysis analysis for an all‐steel gun barrel and a composite gun barrel was conducted.A composite gun barrel was manufactured; by using composite materials, the barrel was lightened by 24.8%.The manufactured composite gun barrel and an all‐steel gun barrel were tested by firing over 2500 shots. [ABSTRACT FROM AUTHOR]

Background: Plastic Surgery originated in war and still has an important role in the management of war wounds and their sequelae. Since June 2022 the Plastic Surgery department of Zaragoza's Miguel Servet University Hospital has been involved in the management of patients with injuries secondary to the Russo-Ukrainian War. In this paper we describe the activity of the plastic surgeons involved and the types of injuries and procedures performed. Methods: We included patients injured in the Russo-Ukrainian conflict transferred for multidisciplinary care to the General Defence Hospital in Zaragoza from June 2022 until December 2023. We gathered epidemiological data, mechanism of injury, anatomical location, types of plastic surgery performed, number of interventions and complications. Results: In the period from June 2022 to December 2023 the multidisciplinary team provided care for a total of 59 patients. Plastic surgeons were involved in the care of 16 patients with a total of 34 plastic surgery procedures: 7 microsurgical free flaps, 6 regional flaps, 4 grafts, 8 debridements, 3 flap remodelings, 4 Targeted Muscle Reinervations, 1 amputation and 1 hand surgery. Three patients suffered from major complications in the form of infections of the surgical wound. Conclusions: Our study showed the crucial role of Plastic Surgery in the management of war injuries and the high proportion of high-complexity microsurgical procedures needed to take care of this type of injury. Level of evidence: Level IV, Therapeutic. [ABSTRACT FROM AUTHOR]

Introduction While the 44-mm clay penetration criterion was developed in the 1970s for soft body armor applications, and the researchers acknowledged the need to conduct additional tests, the same behind the armor blunt trauma displacement limit is used for both soft and hard body armor evaluations and design considerations. Because the human thoraco-abdominal contents are heterogeneous, have different skeletal coverage, and have different functional requirements, the same level of penetration limit does not imply the same level of protection. It is important to determine the regional responses of different thoraco-abdominal organs to better describe human tolerance and improve the current behind armor blunt trauma standard. The purpose of this study was to report on the methods, procedures, and data collected from swine. Materials and Methods Live swine tests were conducted after obtaining approvals from the local institution and the Army Care and Use Review Office of the U.S. Department of Defense. Trachea tubes and an intravenous line were introduced before administering anesthesia. Pressure transducers were inserted into the lungs and aorta. An indenter simulating the backface deformation profiles produced by body armor from military-relevant ballistics to human cadavers was used to deliver impact loading to the liver region. A triaxial accelerometer was included in the indenter design. The animals were monitored for 6 hours, necropsies were performed, and injuries were identified. Biomechanical data of the energy, velocity, deflection, viscous criterion, force, and impulse variables were obtained for each test. Results Peak accelerations, velocities, deflections, forces, impulse, and energies ranged from 897 to 5,808 g, 21 to 59 m/s, 1.96 to 8.87 cm, 2.3 to 13.1 kN, 1.1 to 7.1 Ns, and 58 to 387 J, respectively. The peak viscous criterion ranged from 0.8 to 5.8 m/s. All animals survived the 6-hour survival period. Three animals responded with liver lacerations while the remaining 4 did not have any injuries. Conclusion The experimental design based on parallel tests with whole body human cadavers and cadaver swine was found to be successful in delivering controlled impacts to the liver region of live swine and reproducing liver injuries. Previously used biomechanical measures as potential candidates for injury criteria development were obtained. Using this proven model, tests with additional samples are needed to develop injury risk curves for liver impacts and obtain regional (liver) injury criteria. [ABSTRACT FROM AUTHOR]

The use of ordnance gelatine has been widespread in the field of ballistics as a simulant for soft tissue when assessing ballistic threats. However, the traditional method of preparing ordnance gelatine is time-consuming and requires precision to ensure that the final mold meets the required specifications. Furthermore, temperature control is necessary post-production, and there are limitations on its usage duration. To address these issues, manufacturers have developed pre-mixed, gelatine-like products that are stable at room temperature and require less preparation time. Nonetheless, it is uncertain whether these new products can perform in the same manner as the gold standard of ordnance gelatine. This study used five types of blocks, including ordnance gelatine (10% and 20%), Clear Ballistics (10% and 20%) and Perma-Gel (10%) and subjected them to 9 mm, 0.380 Auto fired from a universal receiver and a 5.56 × 45 mm ammunition fired by a certified firearms instructor. Delta-V and total energy dissipation were measured after each test using data collected from ballistic chronographs placed in front of and behind each block. High-speed video was recorded, and a cut-down analysis conducted. The findings revealed variations in energy dissipation and fissure formation within the block, with greater energy based on fissure formation observed in the ordnance gelatine. Additionally, the high-speed video showed the occurrence of secondary combustions occurring in the premixed gelatines. [ABSTRACT FROM AUTHOR]

Highlights This study presents STF/Fabric composite configurations by impregnating single‐phase shear thickening fluids (S‐STF) and multi‐phase shear thickening fluids (M‐STF) into aramid fabrics. S‐STFs were first prepared at different concentrations by weight (25%, 40%, 55%, and 65%). In addition, M‐STFs were produced by adding silicon carbide (SiC) additive to S‐STFs. As a result of the impregnation of the produced STFs on Aramid fabrics, 30‐layer composite samples were prepared. To determine the ballistic performance of the produced samples, tests were carried out with a single‐stage gas gun system. The shots were performed at an average velocity of 670 m/s. Ballistic tests show that STF‐impregnated fabric samples have better ballistic performance compared to fabric without STF. The STF65/Aramid sample is notable for a 238% increase in energy absorption. In addition, the STF40SiC10/Aramid composite sample produced with M‐STF was found to absorb 18.7% more energy compared to the STF40/Aramid sample. It has been confirmed that keeping the weight ratio of the additive at an optimum level will contribute to ballistic performance. These results contributed to determining the optimum concentration amount for STF/Aramid composites at high speed. S‐STF and SiC additive M‐STFs were produced. STFs were impregnated into 30‐layer Aramid fabrics. Ballistics tests were performed on S‐STF/Aramid and M‐STF/Aramid composite samples with a single‐stage gas gun system. The effects of S‐STF and M‐STF on ballistic performance were investigated. The addition of STF enhanced ballistic performance by increasing energy absorption. [ABSTRACT FROM AUTHOR]

The possibility of enhancing the ballistic performance of aramid fabrics such as Kevlar through the impregnation of nanoparticles is well established. In this study, the influence of the nanoparticle's specifications such as size, shape, and material on the underlying mechanisms is investigated. A colloid-based treatment process is used to impregnate dry nanoparticles into Kevlar fabric. Using a customized gas gun rig, neat and treated samples are tested to determine the kinetic energy absorbed. Silica, alumina, and zinc oxide nanoparticles ranging from 10 to 125 nm, with spherical or cylindrical shape are considered. Silica treated samples perform significantly better (83% increase in energy absorbed vs neat fabric) than alumina or zinc oxide treated samples, likely due to greater agglomeration between yarn interfaces leading to enhanced frictional mechanisms. The exit-face damaged zone area acts as a surrogate for energy absorbed as it correlates well across all samples. Compared to samples with three layers treated individually, samples with three layers treated together display a 21% enhancement in the energy absorbed. Specific energy absorbed for three layers treated together with 80-nm silica is nearly 3 times higher than that for the neat fabric. Samples with three layers treated together with 80-nm silica provide the same performance as the neat fabric for a projectile that is nearly 70 m/s faster. Hybrid structural materials such as nanoparticle-fabric composites offer a promising route to enhance ballistic performance without weight penalty, while being amenable to multifunctional applications. [ABSTRACT FROM AUTHOR]

A set of non-linear optimisation algorithms are combined with a finite element simulation code to analyse the energy absorption and elastic stress wave propagation problem in multilayer/multimaterial armour systems under ballistic impacts. An Abaqus Python script is used to simulate the ballistic event and to generate the variables and post-processing outputs necessary for the integration with the optimisation algorithms. A number of modelling strategies are considered and three optimisation algorithms are used: Particle Swarm Optimisation (PSO), Genetic Algorithm (GA) and Simulated Annealing (SA). The performance and efficiency of each algorithm are assessed through four benchmark tests with different levels of complexity. A multi-objective optimisation procedure is proposed that uses the most efficient algorithm based on every single-objective formulation, variables and constraints from the benchmark tests, resulting in a highly non-linear problem. The proposed optimisation methods successfully achieve the study purposes both in the simulation of generic ballistic impacts and in the quality of the optimised solutions, demonstrating the potential for this type of optimisation method on terminal ballistic applications, serving as a standpoint for further studies into higher energy impacts and material non-linearities. [ABSTRACT FROM AUTHOR]

Background: Use of ultrasound (US) for procedural needle guidance can improve success rates, safety, and accuracy. Often, training is performed on task trainers, which can be prohibitively expensive. Determining undesired needle placement is difficult when the needle is poorly visualized with US. Currently available simulation phantoms cannot provide real‐time feedback on the location of needle placement. Objectives: The primary objective was to develop and determine feasibility of a low‐cost simulation phantom with an internal circuit and LED light system to determine when a needle contacts internal structures. We also aimed to determine whether its use was associated with increased comfort level. Methods: Emergency medicine (EM) residents (PGY‐1 to PGY‐3) performed in‐plane and out‐of‐plane US needle guidance using homemade phantoms. Comfort levels were assessed by pre‐ and post intervention survey. Outcomes were measured on Likert scale (minimum = 1, maximum = 5). The primary outcome was change in confidence markers before and after the simulation task. Secondary outcomes were survey results of comparisons of these models to prior training experiences on simulators and humans. Results: All EM residents (30) in our program were invited to participate. Twenty participants enrolled and completed the study. In the primary outcome, median comfort with out‐of‐plane and in‐plane guidance increased after using the model but was more pronounced for out‐of‐plane guidance. On a posttest survey, residents rated the models overall very similar to prior experience on simulators (median 5/5 [IQR 4.0–5.0]) and moderately similar to humans (median 3/5 [IQR 3.0–4.0]). Conclusions: We created a low‐cost ballistic gelatin phantom with an internal electric needle guidance system. Use of the phantom for training was associated with increased learner comfort with the procedure. Learners rated the characteristics of the phantom as similar to higher‐cost commercial equipment and humans. [ABSTRACT FROM AUTHOR]

Study of the engraving process is significant for interior ballistics. Due to the high transient and strong nonlinear characteristics of the engraving, research on the engraving mechanism is challenging. In this paper, based on the one-dimensional two-phase flow model of interior ballistics coupled with explicit dynamics software, finite element simulation of the engraving is carried out to obtain the changes of parameters during the engraving process, and the dynamic characteristics of the projectile engraving are discussed. By comparing the simulation results with the experimental data, the accuracy of the coupling method in this paper is verified. The relationship between the structural parameters of the sealing band and the extrusion resistance is revealed, and the influence of the extrusion resistance on the dynamic characteristics of the projectile is demonstrated. The simulation results can provide an essential reference for selecting a reasonable sealing band structure. [ABSTRACT FROM AUTHOR]

Artillery designers are always searching for means of improving a gun’s external and internal ballistic properties and this resulted in both new theories surrounding gun construction based on the properties of materials and new methods of building guns capable of firing heavier projectiles to greater ranges. The concept of the accelerator gun sought to achieve the same result without the need for larger and heavier guns and reducing recoil through the use of multiple propellant charges fired sequentially, thus accelerating the projectile without the need for a single high-pressure discharge. It was a quest initiated in France, pursued in the United States and then adopted by a desperate Germany during the latter years of World War 2. [ABSTRACT FROM AUTHOR]

The large compositional space of high entropy alloys (HEA) often presents significant challenges in comprehensively deducing the critical influence of atomic composition on their mechanical responses. We propose an efficient nonparametric kernel-based probabilistic computational mapping to obtain the optimal composition of HEAs under ballistic conditions by exploiting the emerging capabilities of machine learning (ML) coupled with molecular-level simulations. Compared to conventional ML models, the present Gaussian approach is a Bayesian paradigm that can have several advantages, including small training datasets concerning computationally intensive simulations and the ability to provide uncertainty measurements of molecular dynamics simulations therein. The data-driven analysis reveals that a lower concentration of Ni with a higher concentration of Al leads to higher dissipation of kinetic energy and lower residual velocity, but with higher penetration depth of the projectile. To deal with such conflicting computationally intensive functional objectives, the ML-based simulation framework is further extended in conjunction with multi-objective genetic algorithm for identifying the critical elemental compositions to enhance kinetic energy dissipation with minimal penetration depth and residual velocity of the projectile simultaneously. The computational framework proposed here is generic in nature, and it can be extended to other HEAs with a range of non-aligned multi-physical property demands. [ABSTRACT FROM AUTHOR]

Gunshot wound analysis is an important part of medicolegal practice, in both autopsies and examinations of living persons. Well-established and studied simulants exist that exhibit both physical and biomechanical properties of soft-tissues and bones. Current research literature on ballistic wounds focuses on the biomechanical properties of skin simulants. In our extensive experimental study, we tested numerous synthetic and natural materials, regarding their macromorphological bullet impact characteristics, and compared these data with those from real bullet injuries gathered from medicolegal practice. Over thirty varieties of potential skin simulants were shot perpendicularly, and at 45°, at a distance of 10 m and 0.3 m, using full metal jacket (FMJ) projectiles (9 × 19 mm Luger). Simulants included ballistic gelatine at various concentrations, dental silicones with several degrees of hardness, alginates, latex, chamois leather, suture trainers for medical training purposes and various material compound models. In addition to complying to the general requirements for a synthetic simulant, results obtained from dental silicones shore hardness 70 (backed with 20 % by mass gelatine), were especially highly comparable to gunshot entry wounds in skin from real cases. Based on these results, particularly focusing on the macroscopically detectable criteria, we can strongly recommend dental silicone shore hardness 70 as a skin simulant for wound ballistics examinations. [ABSTRACT FROM AUTHOR]

Contact shots to the head often leave behind biological traces inside firearm barrels, a phenomenon of great forensic interest. Until now, the visualization and preservation of these traces presented a significant challenge, lacking a reliable method. This study addresses this gap by searching for a suitable method to extract the traces within a casting. Using alginate or gelatine as suitable materials, the results were hampered by serious adhesion issues and their extraction out of the firearm barrel was impeded. Finally, the combination of 11% gelatine with 1% alginate, introduced into the barrel around a 'central spine', succeeded to consistently produce replicable castings. Experimental contact shots displayed a distinct staining gradient from the muzzle to the rear of the barrel, as revealed through endoscopy and proved in the macroscopic casting. The technique proved effective for various common handgun barrels and successfully preserved blood and gunshot residue (GSR) patterns within the barrel. This method offers the dual benefits of visually mapping staining patterns and securing localized samples for targeted molecular genetic analysis in forensic investigations. [ABSTRACT FROM AUTHOR]

We present here the fabrication at the wafer level and the electrical performance of two types of graphene diodes: ballistic trapezoidal-shaped graphene diodes and lateral tunneling graphene diodes. In the case of the ballistic trapezoidal-shaped graphene diode, we observe a large DC current of 200 µA at a DC bias voltage of ±2 V and a large voltage responsivity of 2000 v/w, while in the case of the lateral tunneling graphene diodes, we obtain a DC current of 1.5 mA at a DC bias voltage of ±2 V, with a voltage responsivity of 3000 v/w. An extended analysis of the defects produced during the fabrication process and their influences on the graphene diode performance is also presented. [ABSTRACT FROM AUTHOR]

The analysis was performed on six commonly used 5.56 x 45 mm projectile types (M193, M855, M855A1, L31A1, M995, and AP45). The projectile's impact velocity (chosen as 900 m/s) was the same in the examination process. This made it possible to assess how the projectile's design has affected its performance against a hard steel target. These evaluations included numerical simulations (Ansys Autodyn) of projectile impacts. Using the available experimental data, the materials in the computational model were first validated. A short description and CAD model of projectiles is also given. Relevant conclusions were reported. [ABSTRACT FROM AUTHOR]

Although underwater submerged launching has been rigorously investigated for decades, there remains a dearth of comprehensive understanding regarding the underwater interior ballistic characteristics for varying barrel lengths. To address this knowledge gap, the present study aims to explore, via numerical simulations, the initial velocity of interior ballistics, projectile drag, and the mechanism of initial flow field formation at the muzzle under various barrel lengths, thereby considering the influence of differing barrel lengths. The five distinct lengths of barrels are expressed as dimensionless ratios of the weight of water column in front of the projectile to the weight of the projectile in order to be more general. Five different ratios of water-to-projectile weight are investigated: 1.0, 1.2, 1.5, 1.8, and 2.0, all possessing identical diameters and evaluated under equivalent launch conditions. Different ratios significantly impact muzzle velocity, with shorter barrels yielding higher muzzle velocities, while ensuring complete propellant combustion. Further investigations indicate that variations in drag constitute the fundamental cause of initial velocity changes. Furthermore, it is observed that barrels of different lengths exhibit identical characteristics at the point of maximum drag. The initial flow field at the muzzle exhibits considerable variations in terms of length, profile dimensions, and intensity. The findings of this study offer valuable insights into exploring the mechanism of submerged launching and will be utilized to investigate the optimal barrel length. [ABSTRACT FROM AUTHOR]

Stromboli is a volcanic island in a persistent state of activity, located off the northern coast of Sicily. The paroxysms have been the most powerful explosive phenomena at Stromboli in the last 150 years. These explosions can produce ballistic projectiles that can heavily affect trails and observation sites as well as hit inhabited areas at lower elevations, down to the coast. On July 3, 2019, a paroxysm significantly affected a great portion of the island with ballistic projectiles. In particular, many decimeter and meter-sized spatter bombs hit the W flank of Stromboli, and ignited multiple fires. In May 2022, we conducted an Unmanned Aerial System photogrammetric campaign over a sector of the W flank of Stromboli that was heavily affected by the paroxysm. The largest clasts were still preserved after 3 years, not disturbed by significant mass wasting phenomena or human interference, and they were not yet hidden by the post-fire regrowth of the brush vegetation. In this study, we constrained the main sources of uncertainty affecting the bombs distribution on the ground, by characterizing a percentage of uncertain clasts, testing various density estimators, and by modeling an areal buffer around the mapped clasts. We produced a 0.18 km2 wide 1.6-cm resolution orthomosaic, a 10-cm resolution Digital Surface Model, and 2813 outlines of the mapped ballistics. Spatial distribution of the ground cover and associated uncertainty were analyzed as a function of the distance and of the angular direction from the source. [ABSTRACT FROM AUTHOR]

A coupled framework of ballistic simulations and an optimized machine learning (ML) model was developed to accurately predict the kinetic energy reduction of a projectile impacting a target. ML models can require a significant number of data points for proper training, testing, and validation. High-performance computing (HPC) resources can be used to simulate the ballistic impacts of various projectiles against several different target materials using appropriate physics-based hydrocodes. Computational modeling can explore areas where experiments would naturally be cost-prohibitive. These hydrocodes can evaluate large parametric spaces varying the projectile and target variables that are required to train an ML model. In this study a large, generated set of data points was used to develop an optimized artificial neural network (ANN) algorithm to create a fast-running model without prior knowledge of the mathematical relationships between all the input and output variables. The optimized ANN model was developed using Optuna in an HPC environment to tune the hyperparameters needed for the ANN model. This fast-running ML model could then be leveraged to investigate designing optimized targets that could protect against different types of projectiles. The results of this work showed that the optimized ANN model predicted the kinetic energy reduction with a mean absolute percentage error of 2.7% across the validation data. Overall, the optimized ANN model showed excellent agreement across the range of data considered by the computational models. [ABSTRACT FROM AUTHOR]

The discovery of a specific form of Late Neolithic object in northeast Poland, commonly interpreted as reed arrowshaft straighteners, prompted investigation into the possible use of reed for archery in the European past. To examine the archery qualities of this raw material, and thus the likely rationale behind the manufacture and use of reed arrowshafts, a number of mechanical and experimental analyses were conducted. The results presented here indicate that reed was well suited for prehistoric archery. This is demonstrated above all by the arrowshaft stiffness required by this discipline, defined as the spine‐force, but also both the technological ease of production of arrows and their ballistic capabilities. [ABSTRACT FROM AUTHOR]

Ballistics is an area of flight, and fewer subjects were of greater importance to nation states in the eighteenth century. William Mountaine who published on the topic in 1747 and 1781, wrote: 'It is not possible in the nature of things for any one kingdom to continue long in a state of peace and tranquility', and 'the art of gunnery has from time to time engaged the attention of the most eminent mathematicians'. This paper describes the slow up-take of ideas, first put forward explicitly by Benjamin Robins in 1742, which challenged the belief that air resistance could be neglected in the flight of cannon balls, and asks why it could be, that for a topic so pressing, a clearly wrong mathematical theory was upheld for so long. While considering a number of factors, it argues the attraction of beautiful and simple geometry can be beguiling. [ABSTRACT FROM AUTHOR]

The object of research is the complex realm of energy localization and coherent ballistic electronic transport within low-dimensional silicon quantum wires, specifically those doped with germanium atoms. Unlike their three-dimensional counterparts, low-dimensional systems exhibit unique electronic transport behaviors, necessitating novel analytical approaches for a comprehensive understanding. The core of this investigation leverages the Phase Field Matching Theory (PMFT) and the tight-binding (TB) approximation, sophisticated methodologies that enable a deep dive into the quantum mechanical nuances of these systems. Through this lens, we examine the intricate dynamics of dispersion relationships, phase factors, group velocities, and notably, the impact of defects introduced by the germanium doping. This research meticulously analyzes how these defects affect electronic and thermal conductivities, along with densities of states, offering new insights into the role of Fano resonances in the fluctuation of transmission and reflection spectra. These resonances, we find, are crucially dependent on the nature of the defects, their configuration, and the electronic parameters in their vicinity, underscoring the nuanced interplay between material composition and electronic properties in low-dimensional systems. The implications of our findings extend far beyond the theoretical. They pave the way for significant advancements in nanotechnology and the design of electronic devices, highlighting the potential for creating more efficient, high-performance components. Furthermore, this work proposes a framework for developing non-destructive testing methodologies that could revolutionize material science by enabling the precise analysis of defects in low-dimensional systems without causing damage. This is particularly critical for the ongoing development of materials with optimized properties for various applications, from electronics to energy storage. In essence, this research not only enriches our understanding of the physics governing low-dimensional systems but also offers practical insights into leveraging these properties for technological innovation. By bridging the gap between theoretical physics and material science, our study sets the stage for the next generation of electronic components and non-destructive evaluation techniques, marking a significant step forward in the application of quantum mechanics to real-world challenges. [ABSTRACT FROM AUTHOR]

Computed tomography (CT) may have a crucial role in the forensic documentation and analysis of firearm injuries. The aim of this forensic ballistics case study was to explore whether two types of expanding bullets and a full metal-jacketed bullet could be differentiated by inspecting bullet fragments and fragmentation pattern in CT. Three types of.30 caliber bullets (full metal-jacketed Norma Jaktmatch, expanding full-copper Norma Ecostrike, and expanding soft-point Norma Oryx) were test fired from a distance of 5 m to blocks of 10% ballistic gelatine. CT scans of the blocks were obtained with clinical equipment and metal artifact reduction. Radiopaque fragments were identified and fragmentation parameters were obtained from the scans (total number of fragments, maximum diameter of the largest fragment, distance between entrance and the closest fragment, length of the fragment cloud, and maximum diameters of the fragment cloud). The fragmentation patterns were additionally visualized by means of 3D reconstruction. In CT, the bullet types differed in several fragmentation parameters. While the expanding full-copper bullet Ecostrike left behind only a single fragment near the end of the bullet channel, the soft-point Oryx had hundreds of fragments deposited throughout the channel. For both expanding bullets Ecostrike and Oryx, the fragments were clearly smaller than those left behind by the full metal-jacketed Jaktmatch. This was surprising as the full metal-jacketed bullet was expected to remain intact. The fragment cloud of Jaktmatch had similar mediolateral and superoinferior diameters to that of Oryx; however, fragments were deposited in the second half of the gelatine block, and not throughout the block. This case study provides a basis and potential methodology for further experiments. The findings are expected to benefit forensic practitioners with limited background information on gunshot injury cases, for example, those that involve several potential firearms or atypical gunshot wounds. The findings may prove beneficial for both human and wildlife forensics. [ABSTRACT FROM AUTHOR]

In examining deaths resulting from gunshot wounds, it is important to describe the wound pathway created by the projectile. Forensic pathologists must identify all entrance and exit wounds and account for all projectiles. Occasionally, confusion arises as to whether a skin defect represents an entrance wound or not, an exit wound, or some other type of wound. Herein, we propose the descriptor "bullet track skin defect" as a formal description for a superficial skin defect created along the pathway of a projectile within the body. Specifically, we define the "bullet track skin defect" as a partial‐ or full‐thickness skin defect produced by a projectile traveling beneath the skin in a relatively tangential fashion as part of a wound pathway within the body. It is somewhat analogous to a traditional graze or superficial tangential wound, wherein the projectile traveling outside the body strikes the skin tangentially from above, without entering the body. However, the projectile is already traveling within the body with the bullet track skin defect, disrupting the skin tangentially from below rather than from above, without exiting the body. Although these defects are not a common presentation of gunshot wounds, they are certainly not rare. With this case series, we suggest that such defects may be referred to as "bullet track skin defects." Alternative language that can substitute for "bullet track skin defects" includes "bullet track skin wounds" or "bullet track cutaneous defects." [ABSTRACT FROM AUTHOR]

The definitions of stored gravitational energy are given. The value of the limited gravitational energy of two massive mutually nonpenetrating balls is calculated. It is established that the stored gravitational energy is always positive. A formula is presented for the maximum possible gravitational energy of two massive balls, which can be used to estimate the energy of the merger of space objects, in particular, gaseous, dusty, and plasma, as well as for ballistic calculations of space flights. [ABSTRACT FROM AUTHOR]

In a tidal disruption event (TDE), a star is destroyed by the gravitational field of a supermassive black hole (SMBH) to produce a stream of debris, some of which accretes onto the SMBH and creates a luminous flare. The distribution of mass along the stream has a direct impact on the accretion rate, and thus modelling the time-dependent evolution of this distribution provides insight into the relevant physical processes that drive the observable properties of TDEs. Analytic models that only account for the ballistic evolution of the debris do not capture salient and time-dependent features of the mass distribution, suggesting that fluid dynamical effects significantly modify the debris dynamics. Previous investigations have claimed that shocks are primarily responsible for these modifications, but here we show – with high-resolution hydrodynamical simulations – that self-gravity is the dominant physical mechanism responsible for the anomalous (i.e. not predicted by ballistic models) debris stream features and its time dependence. These high-resolution simulations also show that there is a specific length-scale on which self-gravity modifies the debris mass distribution, and as such there is enhanced power in specific Fourier modes. Our results have implications for the stability of the debris stream under the influence of self-gravity, particularly at late times and the corresponding observational signatures of TDEs. [ABSTRACT FROM AUTHOR]

A detailed mapping of volcanic ballistic projectiles emplaced in a defined area, represents the starting point to derive preparatory data in hazard and risk studies of ballistics phenomena. Considering as case study the 3rd July 2019 paroxysmal eruption occurred at Stromboli volcano, we map and analyse at very high spatial resolution (8 cm) the distribution of the ballistic spatter clasts emplaced on the E flank of the volcano. The resulting map identifies and reproduces as geospatial polygon elements 152,228 spatter clasts with areal dimensions from 0.03 to 4.23 m2. Dispersed on 0.407 km2, the spatters cover an area of 29,000 m2 corresponding to an erupted products volume from 2.3 to 7.0 × 103 m3, calculated here for the first time. Spatial analyses indicate that the area mostly affected by the clasts emplacement is between N67.5 and N135 directions, identifying a preferential deposition between N112.50 and N123.75 directions. The clasts size distribution rapidly decreases with the size increase, highlighting a nearly constant ratio small/large clasts regardless the distance from the vent. Finally, additional investigations reveal that clasts dispersion parameters decrease progressively with the distance from the vent only along one direction (N67.5), highlighting how the morphology influences the deposition and remobilisation of mapped ballistics. [ABSTRACT FROM AUTHOR]

A mathematical simulation of the internal ballistics of a shot from a gun, depending on the design of the charge of the gun, has been performed. A general system of equations defining the unsteady movement of a two-phase gas–powder mixture in the channel of the barrel of a gun in the one-dimensional approximation is presented. Results of simulation of a shot from a gun charged with tubular powder or chopped powder are presented. The influence of the gradual ignition of a powder in a gun and of its nonstationary and erosion burning in it on the parameters of the ballistic process in the gun and the influence of the mass and disposition of an igniter in the gun on the dynamics of a shot from it were investigated. [ABSTRACT FROM AUTHOR]

In the era of unmanned war, with the increasing muzzle velocity requirement, the design of gun is significantly restricted by recoil, especially for guns installed on unmanned aerial vehicles. A recoilless gun with combustible cartridge was designed to eliminate recoil and increase projectile velocity, and the influence of main parameters on recoil was studied. First, a design of a recoilless gun with high projectile velocity is proposed based on combustible cartridge case. Next, a classical interior ballistic model is developed during the recoilless gun firing cycle, and the effect of main parameters of interior ballistics on the performance is investigated. Additionally, simple nonlinear fitting formulae are defined to highlight the variation of recoil momentum with the time of interior ballistic model. Finally, numerical simulation results are compared with the test results to validate the feasibility of the design. The experimental results demonstrate that the classical interior ballistic model can be used to accurately analyze the effect of the parameters on the projectile velocity and the recoil reduction efficiency. The projectile velocity of the recoilless gun could raised to 1200 m/s and the recoil momentum could be eliminated almostly. Therefore, the newly designed recoilless gun effectively eliminates the recoil momentum and significantly improves the projectile velocity. The findings should make an important contribution to the field of engineering applications of recoilless gun. [ABSTRACT FROM AUTHOR]

The change of ambient temperature will cause the change of gunpowder burning rate, which will directly affect the ballistic performance of the projectile and cause the change of the overload of the projectile fuze system. In this study, the numerical simulation program of the interior trajectory of a large-caliber gun was established by MATLAB, and the variation rules of the corresponding trajectory parameters at different temperatures were obtained. ANSYS finite element software is used to analyze the force of the projectile fuze system under different ambient temperatures. The results show that under the same loading conditions, with the increase of ambient temperature, the maximum pressure in the gun bore and the muzzle velocity of the projectile increase significantly, and the stress and strain of the projectile fuze system in the bore increase gradually. The numerical simulation results are in good agreement with the theory, which reveals the influence of ambient temperature on the overload in the bore of the projectile fuze system to a certain extent, and provides theoretical support for the study of internal ballistics, charge design and gun use. [ABSTRACT FROM AUTHOR]

To clarify the combustion process of a modular charge system with a primer gap, the rules governing the cartridge movement and pressure change in the chamber are analyzed. Based on the characteristics of the modular charge system, an axisymmetric two-phase flow model of the interior ballistics is established, with the monotonic upward-centered scheme for conservation laws adopted to calculate the combustion process. Compared with the experimental results, the difference in the peak pressure is less than 5%, which indicates that the mathematical model and scheme are reliable and accurate. The results show that, during the initial stage of ignition, the combustible container remains unbroken, and the gas and solid particles are prevented from spreading to the chamber by the end cap of the cartridge. Thus, only the gas inside the igniter tube influences the flow field in the chamber. After the combustible container has broken, the gas and solid particles move rapidly toward the cavity from the combustible container. The axial movement of solid particles is more intense than that of the gas particles, but the radial movement of solid particles is relatively weak. Furthermore, the existence of the primer gap leads to a delay in the ignition time of the solid particles, which delays the rupture time of the igniter tube and the module cartridge. [ABSTRACT FROM AUTHOR]

Researchers use a variety of target materials, and sometimes combinations of materials, in their archaeological experiments to examine thrust‐spear or projectile penetration, impact angle, durability, and other issues involving prehistoric hunting weaponry. This variety of target materials is beneficial to archaeological science in several ways, but it may also hinder the comparison of results because many of these target materials do not necessarily share similar physical properties. Here, we assess the penetration properties of four different target materials—store‐bought meat, clay, and two types of gelatin—via static penetration tests of a modern broadhead‐tipped arrow and a stone‐tipped projectile attached to an Instron Universal Materials Tester. Our analyses of load‐deflection curves, peak load, and work energy demonstrate how the four target materials are similar in some ways but different in others, which suggests that researchers may strategically employ one or several depending on the question asked or hypothesis tested. [ABSTRACT FROM AUTHOR]

Multi-layer fabrics are commonly used in ballistics shields with a lower bulletproof class to protect against pistol and revolver bullets. In order to additionally limit the dynamic deflection of the samples, layers reinforced with additional materials, including non-Newtonian fluids compacted by shear, are additionally used. Performing a wide range of tests in each case can be very problematic; therefore, there are many calculation methods that allow, with better or worse results, mapping of the behavior of the material in the case of impact loads. The search for simplified methods is very important in order to simplify the complexity of numerical fabric models while maintaining the accuracy of the results obtained. In this article, multi-layer composites were tested. Two samples were included in the elements subjected to shelling. In the first sample, the outer layers consisted of aramid fabrics in a laminate with a thermoplastic polymer matrix. The middle layer contained a non-Newtonian shear-thickening fluid enclosed in hexagonal (honeycomb) cells. The fluid was produced using polypropylene glycol and colloidal silica powder with a diameter of 14 µm in the proportions of 60/40. The backing plate was made using a 12-layer composite made of Twaron® para-aramid fabrics with a DCPD matrix—not yet used in a wide range of ballistics. Then, numerical simulations were carried out in the Abaqus/Explicit dynamic analysis. The Johnson–Cook constitutive strength model was used to describe the behavior of elastic–plastic materials constituting the elements of the projectiles. For the non-Newtonian fluid, a Up-Us EOS was used. The inner layers of the fabric were treated as an orthotropic material. Complete homogenization of the sample layers was carried out, thanks to which each layer was treated as a homogeneous continuum. As a parameter of fracture mechanics for shield components, the strain criterion was used with the smooth particles hydrodynamics method (SPH). Then, the results of simulations were compared with the results of the ballistic test for both samples placed next to each other, which resulted in the formation of a multi-layer composite in one ballistic test subjected to impact loads during firing with a 9 × 19 mm Parabellum FMJ projectile with an initial velocity of 370 ± 10 m/s. The results of numerical tests are very similar to the ballistic tests, which indicates the correct mapping of the process and the correct conduct of layer homogenization. The applied proportions of the components in the non-Newtonian fluid allowed a reduction in the deflection compared to previous studies. Additionally, the proposal to use a DCPD matrix allowed to obtain a much lower deflection value compared to other materials, which is a novelty in the field of production of ballistic shields. [ABSTRACT FROM AUTHOR]

Two-phase flow numerical methods are applied in internal ballistics widely, which has made higher fidelity analysis with minimal cost become an urgent demand. Current methods are based on independent dimension, and there is no definite conversion criterion and data transmission method, which have limited the application of efficient hybrid models applied to calculation. In this paper, we propose a hybrid method by linking a two dimensional (2D) model to a one dimensional (1D) model for two-phase flow. First, 1D and 2D two-phase flow models are established according to the flow field states in different phases. Next, the criterion of conversion between the two models is established, which is a quantitative index to judge the degree of radial effect and axial effect. Finally, dimension transformation in the radial direction and grid mergence in the axial direction are conducted to complete the whole computing model. The simulation results show that the hybrid method is more efficient in the interior ballistic process and maintains the level of trust in classical codes. Compared with the 2D method, the hybrid method significantly improves the computational efficiency by 86.5%. By analyzing the state in the chamber, the accuracy of the conversion criterion is confirmed. This criterion can be used as the transformation criterion of the hybrid model to form the standard multi-dimensional calculation transformation criterion of interior ballistics and may be promising for the rapid simulation of two-phase flow in interior ballistics. [ABSTRACT FROM AUTHOR]

The ballistic impact response of Kevlar textiles is significantly influenced by the friction between the yarns. It increases the dissipation of energy when yarns begin to displace relative to one another and it also results in to transfer of load to a larger area during ballistic impacts. In the present work, a novel sulfonyl aryl group containing monomer acrylic acid-2-(toluene sulphonyl amine)-ethyl ester (AATSAEE) was synthesized by a three-step process with ethanol amine and p-toluene sulfonic acid as starting material. The monomer was homopolymerized and grafted on Kevlar fabric by UV-induced free radical polymerization technique. Benzoyl peroxide (BPO) was used as initiator. Utilizing spectroscopic and thermal gravimetric methods, the monomer, precursor, and the homopolymer were characterized. The yarn pull-out tests on unmodified and AATSAEE grafted Kevlar fabrics were performed on Universal Tensile Tester at a steady speed of the upper jaw of 50 cm min−1. Increases in yarn pull out force have been noted with grafting of AATSAEE on Kevlar fabric. The peak force increases around 284% with grafting which indicates an increase in friction forces. When these yarns start to move apart from one another due to friction factors, the fabric's energy dissipation increases and it may results in to increase in energy absorption at the time of ballistic impacts. [ABSTRACT FROM AUTHOR]

It is shown that the ratio of the proton convective gyroradius r Ep, to the width of the shock ramp D , controls the thermalization process of ions in quasi-perpendicular shocks. When r Ep/ D > 1, the solar wind beam energy is rapidly converted to gyration (thermal) energy by a universal, transit time thermalization (TTT) mechanism that does not require any collisions, waves, or instabilities. The TTT of ions on magnetic field gradients is followed by stochastic wave energization (SWE) on electric field gradients. Ions heated by TTT and SWE processes are subject to additional ballistic surfing acceleration caused by the convection field in the shock front. These three fundamental ion energization mechanisms are studied with test-particle simulations in a realistic shock model, and are shown to be consistent with magnetospheric multiscale measurements in the Earth's bow shock. It is also shown that shock reflected ions are produced by the SWE process and not by the cross-shock potential. An explanation for downstream oscillations in quasi-perpendicular shocks is also provided. [ABSTRACT FROM AUTHOR]

A detailed mapping of volcanic ballistic projectiles emplaced in a defined area, represents the starting point to derive preparatory data in hazard and risk studies of ballistics phenomena. Considering as case study the 3rd July 2019 paroxysmal eruption occurred at Stromboli volcano, we map and analyse at very high spatial resolution (8 cm) the distribution of the ballistic spatter clasts emplaced on the E flank of the volcano. The resulting map identifies and reproduces as geospatial polygon elements 152,228 spatter clasts with areal dimensions from 0.03 to 4.23 m2. Dispersed on 0.407 km2, the spatters cover an area of 29,000 m2 corresponding to an erupted products volume from 2.3 to 7.0 × 103 m3, calculated here for the first time. Spatial analyses indicate that the area mostly affected by the clasts emplacement is between N67.5 and N135 directions, identifying a preferential deposition between N112.50 and N123.75 directions. The clasts size distribution rapidly decreases with the size increase, highlighting a nearly constant ratio small/large clasts regardless the distance from the vent. Finally, additional investigations reveal that clasts dispersion parameters decrease progressively with the distance from the vent only along one direction (N67.5), highlighting how the morphology influences the deposition and remobilisation of mapped ballistics. [ABSTRACT FROM AUTHOR]

To date, various designs have been proposed to increase the efficiency of radiative coolers with approaches such as changes in materials and their properties, size and shape of the elements, and structures geometry. In the present work, an attempt has been made to obtain this important issue by presenting an innovative strategy from a new perspective. In this strategy, by keeping the face exposed to solar energy away from the body, heat distribution can be inhibited, which leads to a decrease in body temperature. This act simultaneously provides a higher operating temperature for the emitter section, thereby enhancing the exergy of the system. On the other hand, the presence of the thermal diode allows the surface of the object to continue to radiate its heat. Hence, several experiments were designed and performed to evaluate the performance of the strategy by an experimental apparatus built for this purpose. Initially, the rectification ratio results of constructed rectifier mirrors showed that the light transmission amount in the forward path is nearly 44% higher than in the reverse direction. In the next step, the temperature measurement of the samples showed the sub-ambient temperature for the present work with a difference of 9 and 2 °C, against direct sunlight and the night sky, respectively. This model also has a high-temperature difference of about 13, 11, and 6.5 °C during the day and 1.6, 0.5, and 0.5 °C at night below the other three samples. This superiority was maintained in cloudy weather conditions as well as thermal shock stability. One of the most important applications of radiation coolers is in the aerospace industry. In this particular application, in addition to cooling, it is vital to protect the equipment against thermal shock caused by sudden and extreme temperature differences in space. Due to obtaining results such as efficient cooling rate, and high resistance to thermal shock, this concept provides a practical vision for improving the spacecraft's cooling systems. [ABSTRACT FROM AUTHOR]

A promising direction in barrel ballistics aimed at increasing the muzzle velocity of a projectile is the use of new propellants as an attached charge. This paper presents an experimental and theoretical method for determining the law of propellant combustion in a manometric experiment (in a closed volume). Within the framework of this method, a small number of experiments could be sufficient to determine a change in the law of combustion during the propellant burnout and depending on pressure. This method is demonstrated on the example of processing three experiments with model high-density propellant. The laws of combustion of high-density propellants, obtained in this study, can later be used to calculate the gas-dynamic parameters of a shot from a barrel system or a nozzle bomb (in a semi-closed volume) using these propellants. [ABSTRACT FROM AUTHOR]

The identification of firearms is of paramount importance for investigating crimes involving firearms, as it establishes the link between a particular firearm and firearm-related elements found at a crime scene, such as projectiles and cartridge cases. This identification relies on the visual comparison of such elements against reference samples from suspect firearms or those existing in databases. Whenever this approach is not possible, the chemical analysis of the gunpowder and gunshot residue can provide additional information that may assist in establishing a link between samples retrieved at a crime scene and those from a suspect or in the identification of the corresponding model and manufacturer of the ammunition used. The most commonly used method for the chemical analysis of gunshot residue is scanning electron microscopy with energy dispersive X-ray, which focuses on the inorganic elements present in ammunition formulation, particularly heavy metals. However, a change in the legal paradigm is pushing changes in these formulations to remove heavy metals due to their potential for environmental contamination and the health hazards they represent. For this reason, the importance of the analysis of organic compounds is leading to the adoption of a different set of analytical methodologies, mostly based on spectroscopy and chromatography. This manuscript reviews the constitution of primer and gunpowder formulations and the analytical methods currently used for detecting, characterising, and identifying their compounds. In addition, this contribution also explores how the information provided by these methodologies can be used in ammunition identification and how it is driving the development of novel applications within forensic ballistics. [ABSTRACT FROM AUTHOR]

In the frame of an experimental setting, the formation of round-shaped compounded glass fragments on the exit site after gunshots through a windshield was examined. For that purpose, a 9 × 19 mm pistol (HK P30) and two different cartridges containing (a) a full metal jacketed round-nosed projectile and (b) a deformation projectile were used. On the basis of 52 gunshots, the morphology, impact angles and terminal ballistics of occurring compounded glass fragments were examined. The results showed that the compounded glass fragments' morphology allowed for the differentiation of two used projectiles. Fragments were able to cause round-shaped defects in a single cotton layer (T-shirt) with subsequent penetration of up to 2.4 cm into ballistic gelatin (10%, 4 °C). As a function of the projectile type, the compounded glass fragments showed different reproducible impact angles that differed notably from the known conical pattern of expelled glass fragments after bullet penetration. These findings might help to explain the atypical morphology of gunshot wounds with laminated glass as an intermediate target and prevent possible misinterpretations when reconstructing the sequence of events. [ABSTRACT FROM AUTHOR]

An excellent flame suppression effect can be achieved using a novel porous brake. To understand the flame-suppression mechanism of a porous brake, combustion using a muzzle brake is investigated. A set of internal ballistic equations is employed to provide accurate velocity and pressure for a projectile moving to the muzzle. The multispecies transport Navier–Stokes equations, which incorporate complex chemical reactions, are solved by coupling a real gas equation of state, the Soave–Redlich–Kwong model, and a detailed chemical reaction kinetic model. The development of muzzle flow with a chemical reaction is simulated, and the interaction between chemical reactions with the muzzle flow field is numerically calculated to explain the muzzle combustion mechanism with a porous brake. The underlying mechanism is analyzed in detail. The results demonstrate that, first, the gas is fully expanded in the brake, leading to a reduction in pressure and temperature at the muzzle, thereby reducing the initial flame. In addition, the shock wave weakens due to the expansion and separation process, leading to a reduction in the mixture of gas and air, ultimately resulting in a reduction in the intermediate and secondary flames. [ABSTRACT FROM AUTHOR]

A letter published in the Journal of Translational Medicine discusses the immune response triggered by radiation therapy (RT). The letter explains that RT can have both immunomodulatory and immunosuppressive effects on the immune system. The authors conducted a study comparing two types of RT, shield RT (SRT) and conformal RT (CRT), and found that CRT was more effective at delaying tumor growth and improving survival due to a stronger CD8+ TIL-mediated immune response. The study also revealed that monocytes played a critical role in activating CD8+ TILs after CRT. The authors emphasize the importance of accurately describing the irradiation technique used in preclinical studies and highlight the need for further research on the immune mechanisms underlying RT efficacy. [Extracted from the article]

Shear thickening fluid (STF) is a dense colloidal suspension of nanoparticles in a carrier fluid in which the viscosity increases dramatically with a rise in shear rate. Due to the excellent energy absorption and energy dissipation of STF, there is a desire to employ STFs in a variety of impact applications. In this study, a comprehensive review on STFs' applications is presented. First, several common shear thickening mechanisms are discussed in this paper. The applications of different STF impregnated fabric composites and the STF's contributions on improving the impact, ballistic and stab resistance performance have also been presented. Moreover, recent developments of STF's applications, including dampers and shock absorbers, are included in this review. In addition, some novel applications (acoustic structure, STF-TENG and electrospun nonwoven mats) based on STF are summarized, to suggest the challenges of future research and propose some more deterministic research directions, e.g., potential trends for applications of STF. [ABSTRACT FROM AUTHOR]

This paper describes the method and results of an experimental study of unsteady burning rate of high-energy materials containing metal powder additives under depressurization at a rate of 140–160 MPa/s. The method based on stating and solving the inverse problem of internal ballistics is used to determine the unsteady burning rate. The studies are carried out for high-energy materials, including energy additives in the form of metal powders (ASD-4, ASD-6, and Alex aluminum powders), aluminum diboride, and dodecaboride. It is shown by analyzing the this study that the unsteady burning rate of high-energy materials under sharp depressurization is oscillatory and depends on the energy additive type. [ABSTRACT FROM AUTHOR]

The high recoil force of a high-power gun produces a strong impact on the carrier, which severely limits the application of the high-power gun mounted on vehicles. A gas-controlled side-jet gun was designed to reduce the recoil force, and the gas-solid transient flow in the bifurcated tube of the gun was studied. First, a one-dimensional two-phase interior ballistics model was established considering the gas-solid coupling between the propellant gas and the valve in the front gas tube. Then, the propagation of the rarefaction wave in the barrel was studied, and the flow field distribution in the bifurcated tube was obtained. Finally, the mechanism of recoil reduction was analyzed. Results show that the bifurcated two-phase flow model can be used to accurately analyze the effect of the gas-controlled side-jet gun's parameters on the projectile velocity and the recoil reduction efficiency. The projectile velocities of the gas-controlled side-jet gun and the traditional gun are 955.7 m/s and 960 m/s, respectively. The projectile velocity loss of the gas-controlled side-jet gun is less than 0.5 %. The recoil momentum of the traditional gun and the gas-controlled side-jet gun are 538.62 N·s and 336.68 N·s, respectively. The recoil momentum of the gas-controlled side-jet gun decreases by 37.49 %. Additionally, the single firing time of the gas-controlled side-jet gun (18.91 ms) is less than that of the traditional single-barrel gun (more than 60 ms). Therefore, the newly designed gas-controlled side-jet gun significantly reduces the recoil momentum without losing the projectile velocity and continuous firing mode. [ABSTRACT FROM AUTHOR]

Different charge structures have different interior ballistic performance. Existing research is based on experimental measurements or the lumped parameter method to obtain limited ballistic characteristics, which indirectly impacts the analysis of the parameters' distribution, requiring a complex modeling solution process. Besides this, the ignition performance of different charge structures needs to be further explored. The disadvantages of previous studies have limited the feasibility of further optimization of the composite charge structure. In this paper, we apply a two-dimensional two-phase flow method based on the Eulerian–Lagrangian model to study the performance of different composite charge structures. First, we establish the mathematical model of different particle types based on interior ballistics, which is directly related to the research foundation of subsequent ballistic performance. Next, we investigate the multi-scale reaction flow of complex charge structures by the two-phase flow method and obtain the distribution of parameters in the chamber. Finally, we conduct a study with different particle charge parameters to explore the sensitivity of ballistic characteristics to structural parameters. The results show that the tubular propellant has good ignition performance in different charge structures, and the ignition consistency can be improved by charging tubular propellant in the center of the chamber. However, more tubular propellants are ineffective at significantly improving ignition performance, and result in a decrease in combustion chamber pressure. These results may be promising for the optimization of various charge structures. [ABSTRACT FROM AUTHOR]

Rare earth-doped zinc oxide (ZnO:RE) systems are attractive for future optoelectronic devices such as phosphors, displays, and LEDs with emission in the visible spectral range, working even in a radiation-intense environment. The technology of these systems is currently under development, opening up new fields of application due to the low-cost production. Ion implantation is a very promising technique to incorporate rare-earth dopants into ZnO. However, the ballistic nature of this process makes the use of annealing essential. The selection of implantation parameters, as well as post-implantation annealing, turns out to be non-trivial because they determine the luminous efficiency of the ZnO:RE system. This paper presents a comprehensive study of the optimal implantation and annealing conditions, ensuring the most efficient luminescence of RE3+ ions in the ZnO matrix. Deep and shallow implantations, implantations performed at high and room temperature with various fluencies, as well as a range of post-RT implantation annealing processes are tested: rapid thermal annealing (minute duration) under different temperatures, times, and atmospheres (O2, N2, and Ar), flash lamp annealing (millisecond duration) and pulse plasma annealing (microsecond duration). It is shown that the highest luminescence efficiency of RE3+ is obtained for the shallow implantation at RT with the optimal fluence of 1.0 × 1015 RE ions/cm2 followed by a 10 min annealing in oxygen at 800 °C, and the light emission from such a ZnO:RE system is so bright that can be observed with the naked eye. [ABSTRACT FROM AUTHOR]

Pepper spray launchers are more precise and wind stable compared to conventional pepper sprays and are commonly used as a self-defensive tool. With the advanced potential, they may also harbour a greater risk for injuries, especially if they are not used within the suggested safety distance. If the shooting distance is below 1.5 m, energy densities may exceed the threshold energy density for the penetration of skin leading to skin laceration. We present a case where a man is hit by the liquid jet of a JPX Jet Protector® with an estimated shooting distance of 0.3 m. The man suffered from a bleeding skin laceration, which had to be sewed in the hospital. This case report furthermore outlines the potentially dangerous effect of pepper spray launchers and thereby their role in forensic investigations. [ABSTRACT FROM AUTHOR]