Search

Extracorporeal life support systems (ECLS) are life-sustaining measures for severe cardiovascular diseases, serving as bridging treatment either until cardiovascular function is restored or alternative treatment, such as heart transplantation or the implantation of permanent ventricular assist devices is performed. Given the insufficient evidence and frequent urgency of implantation without initial patient consent, the ethical challenges and psychological burden for patients, relatives and the interprofessional intensive care team are significant. As with any treatment, an appropriate therapeutic goal for ECLS treatment based on the indications and patient informed consent is mandatory. In order to integrate the necessary ethical considerations into everyday clinical practice, a structured algorithm for handling ECLS is proposed here, which takes ethical aspects into due account. [ABSTRACT FROM AUTHOR]

There is increasing focus on applying deep learning methods to electrocardiograms (ECGs), with recent studies showing that neural networks (NNs) can predict future heart failure or atrial fibrillation from the ECG alone. However, large numbers of ECGs are needed to train NNs, and many ECGs are currently only in paper format, which are not suitable for NN training. We developed a fully-automated online ECG digitisation tool to convert scanned paper ECGs into digital signals. Using automated horizontal and vertical anchor point detection, the algorithm automatically segments the ECG image into separate images for the 12 leads and a dynamical morphological algorithm is then applied to extract the signal of interest. We then validated the performance of the algorithm on 515 digital ECGs, of which 45 were printed, scanned and redigitised. The automated digitisation tool achieved 99.0% correlation between the digitised signals and the ground truth ECG (n = 515 standard 3-by-4 ECGs) after excluding ECGs with overlap of lead signals. Without exclusion, the performance of average correlation was from 90 to 97% across the leads on all 3-by-4 ECGs. There was a 97% correlation for 12-by-1 and 3-by-1 ECG formats after excluding ECGs with overlap of lead signals. Without exclusion, the average correlation of some leads in 12-by-1 ECGs was 60–70% and the average correlation of 3-by-1 ECGs achieved 80–90%. ECGs that were printed, scanned, and redigitised, our tool achieved 96% correlation with the original signals. We have developed and validated a fully-automated, user-friendly, online ECG digitisation tool. Unlike other available tools, this does not require any manual segmentation of ECG signals. Our tool can facilitate the rapid and automated digitisation of large repositories of paper ECGs to allow them to be used for deep learning projects. [ABSTRACT FROM AUTHOR]

This special issue contains six revised and extended versions of tool papers that appeared in the proceedings of TACAS 2021, the 27th International Conference on Tools and Algorithms for the Construction and Analysis of Systems. The issue is dedicated to the realization of algorithms in tools and the studies of the application of these tools for analysing hard- and software systems. [ABSTRACT FROM AUTHOR]

Copyright of Die Urologie is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In this paper, we propose a novel paper currency defect detection algorithm using quaternion uniform strength. We first build paper currency image preprocessing integration framework which includes intensity balancing, paper currency location, and geometric correction. We then propose a global–local paper currency image registration algorithm by moving key areas within certain range which can eliminate the false difference effectively. Finally, the quaternion uniform strength is calculated by using quaternion convolution edge detector. The defect degree of paper currency is determined by using the quaternion uniform color difference. The proposed algorithm is tested using different datasets from five countries: CNY, USD, EUR, VND, and RUB. The experimental results demonstrate that the proposed algorithm yields better results than the existing state-of-the-art paper currency defect detection techniques. The demo of the proposed paper currency defect detection algorithm will be publicly available. [ABSTRACT FROM AUTHOR]

In this paper two procedures are developed for the identification of the parameters contained in an orthotropic elastic-plastic-hardening model for free standing foils, particularly of paper and paperboard. The experimental data considered are provided by cruciform tests and digital image correlation. A simplified version of the constitutive model proposed by Xia et al. (Int J Solids Struct 39:4053-4071, ) is adopted. The inverse analysis is comparatively performed by the following alternative computational methodologies: (a) mathematical programming by a trust-region algorithm; (b) proper orthogonal decomposition and artificial neural network. The second procedure rests on preparatory once-for-all computations and turns out to be applicable economically and routinely in industrial environments. [ABSTRACT FROM AUTHOR]

They give fixed parameter tractable algorithms for the problem parameterized by various structural parameters. The authors give a greedy loop-free algorithm for the exhaustive generation, a successor algorithm that runs in constant amortized time, among other algorithms, as well as results for the fixed spin generalization of this problem. IWOCA (International Workshop on Combinatorial Algorithms) is an annual conference series covering all aspects of combinatorial algorithms. [Extracted from the article]

This work describes the log-MAP (BCJR) algorithm implementation of a close to capacity dirty paper coding CODEC. The CODEC consists of eight deep pipeline processors. It decodes blocks of 975 bits in 26.9 ms using less than 9.7% of low-cost FPGA (and no DSP blocks). Two pipelines, for alpha and beta, calculate the values of gamma (of the BCJR) to reduce the storage requirements. The final log-likelihood ratio (LLR) is calculated together with alpha, reusing intermediate results. The number of bits used by the different signals of the processor is easily configurable. It was set to six bits to the channel measure signals and eight bits to log of probability signals like alpha, beta, and others. The CODEC clock was 100 MHz. The achieved bit rate is 36.2 Kbps per CODEC, but multiple CODECs can be fit into a single chip. The CODEC is 3.49 dB from the channel capacity. [ABSTRACT FROM AUTHOR]

Objectives: To develop and evaluate methods for assembling radiopaque printed paper sheets to realistic patient phantoms for CT dose and image quality testing.Methods: CT images of two patients were radiopaque printed with aqueous potassium iodide solution (0.6 g/ml) on paper. Two methods were developed for assembling the paper sheets to head and neck phantoms. (1) Printed sheets were fed to a paper-based 3D printer along with corresponding 3D printable STL files. (2) Paper stacks of 5-mm thickness were glued with toner, cut to the patient shape and assembled to a phantom. In a sample application study, both phantoms were examined with five different tube current settings. Images were reconstructed using filtered-back projection (FBP) and iterative reconstruction (AIDR 3D) with three strength levels. Dose length product (DLP), signal-to-noise ratios (SNR) and contrast-to-noise ratios (CNRs) were analysed. Data were analysed using 2-way analysis of variance (ANOVA).Results: Both methods achieved anthropomorphic phantoms with detailed patient anatomy. The 3D printer yielded a precise reproduction of the external patient shape, but caused visible glue artefacts. Gluing with toner avoided these artefacts and yielded more flexibility with regard to phantom size. In the sample application study, non-inferior SNR and CNR and up to 83.7% lower DLP were achieved on the phantoms with AIDR 3D compared with FBP.Conclusions: Two methods for assembling radiopaque printed paper sheets to phantoms of individual patients are presented. The sample application demonstrates potential for simulation of patient imaging and systematic CT dose and image quality assessment.Key Points: • Two methods were developed to create realistic CT phantoms of individual patients from radiopaque printed paper sheets. • Analysis of five tube current and four reconstruction settings on two radiopaque 3D printed patient phantoms yielded non-inferior SNR and CNR and up to 83.7% lower dose with iterative reconstruction in comparison with filtered back projection. • Radiopaque 3D printed phantoms can simulate patients and allow systematic analysis of CT dose and image quality parameters. [ABSTRACT FROM AUTHOR]

Zemblys et al. (Behavior Research Methods, 51(2), 840–864, 2019) reported on a method for the classification of eye-movements ("gazeNet"). I have found three errors and two problems with that paper that are explained herein. Error 1: The gazeNet classification method was built assuming that a hand-scored dataset from Lund University was all collected at 500 Hz, but in fact, six of the 34 recording files were actually collected at 200 Hz. Of the six datasets that were used as the training set for the gazeNet algorithm, two were actually collected at 200 Hz. Problem 1 has to do with the fact that even among the 500 Hz data, the inter-timestamp intervals varied widely. Problem 2 is that there are many unusual discontinuities in the saccade trajectories from the Lund University dataset that make it a very poor choice for the construction of an automatic classification method. Error 2 The gazeNet algorithm was trained on the Lund dataset, and then compared to other methods, not trained on this dataset, in terms of performance on this dataset. This is an inherently unfair comparison, and yet nowhere in the gazeNet paper is this unfairness mentioned. Error 3 arises out of the novel event-related agreement analysis employed by the gazeNet authors. Although the authors intended to classify unmatched events as either false positives or false negatives, many are actually being classified as true negatives. True negatives are not errors, and any unmatched event misclassified as a true negative is actually driving kappa higher, whereas unmatched events should be driving kappa lower. [ABSTRACT FROM AUTHOR]

Edge computing enables portable devices to provide smart applications, and the indoor positioning technique offers accurate location-based indoor navigation and personalized smart services. To achieve the high positioning accuracy, an indoor positioning algorithm based on particle filter requires a large number of sample particles to approximate the probability density function, which leads to the additional computational cost and high fusion delay. Focusing on real-time and accurate positioning, an edge computing-enabled green multi-source fusion indoor positioning algorithm called APFP is proposed based on adaptive particle filter in this paper. APFP considers both pedestrian dead reckoning (PDR) signals in mobile terminals and the received signal strength indication (RSSI) of Bluetooth, and effectively merges the error-free accumulation of trilateral positioning and the accurate short-range positioning of PDR, which enables mobile terminals adaptively perform particle filter to reduce the computing time and power consumption while ensuring positioning accuracy simultaneously. Detailed experimental results show that, compared with the traditional particle filter algorithm and the map-constrained algorithm, the proposed APFP reduces fusion computing cost by 59.89% and 54.37%, respectively. [ABSTRACT FROM AUTHOR]

Each year, the editorial board of Computational Optimization and Applications selects a paper from the preceding year's publications for the Best Paper Award. This derivative-free algorithm relies on randomly generated directions and is analyzed from a probabilistic viewpoint, leading to complexity guarantees for both deterministic and probabilistic versions of the method. First, following recent developments in nonconvex optimization, complexity results have become increasingly popular in derivative-free optimization [[8]]. [Extracted from the article]

Nowadays, the application of artificial intelligence (AI) algorithms and techniques is ubiquitous and transversal. Fields that take advantage of AI advances include sound and music processing. The advances in interdisciplinary research potentially yield new insights that may further advance the AI methods in this field. This special issue aims to report recent progress and spur new research lines in AI-driven sound and music processing, especially within interdisciplinary research scenarios. [ABSTRACT FROM AUTHOR]

Recently, the concept of cloud computing has been extended towards the network edge. Devices near the network edge, called fog nodes, offer computing capabilities with low latency to nearby end devices. In the resulting fog computing paradigm (also called edge computing), application components can be deployed to a distributed infrastructure, comprising both cloud data centers and fog nodes. The decision which infrastructure nodes should host which application components has a large impact on important system parameters like performance and energy consumption. Several algorithms have been proposed to find a good placement of applications on a fog infrastructure. In most cases, the proposed algorithms were evaluated experimentally by the respective authors. In the absence of a theoretical analysis, a thorough and systematic empirical evaluation is of key importance for being able to make sound conclusions about the suitability of the algorithms. The aim of this paper is to survey how application placement algorithms for fog computing are evaluated in the literature. In particular, we identify good and bad practices that should be utilized respectively avoided when evaluating such algorithms. [ABSTRACT FROM AUTHOR]

In the last 16 years, more than 200 research articles were published about research-paper recommender systems. We reviewed these articles and present some descriptive statistics in this paper, as well as a discussion about the major advancements and shortcomings and an overview of the most common recommendation concepts and approaches. We found that more than half of the recommendation approaches applied content-based filtering (55 %). Collaborative filtering was applied by only 18 % of the reviewed approaches, and graph-based recommendations by 16 %. Other recommendation concepts included stereotyping, item-centric recommendations, and hybrid recommendations. The content-based filtering approaches mainly utilized papers that the users had authored, tagged, browsed, or downloaded. TF-IDF was the most frequently applied weighting scheme. In addition to simple terms, n-grams, topics, and citations were utilized to model users' information needs. Our review revealed some shortcomings of the current research. First, it remains unclear which recommendation concepts and approaches are the most promising. For instance, researchers reported different results on the performance of content-based and collaborative filtering. Sometimes content-based filtering performed better than collaborative filtering and sometimes it performed worse. We identified three potential reasons for the ambiguity of the results. (A) Several evaluations had limitations. They were based on strongly pruned datasets, few participants in user studies, or did not use appropriate baselines. (B) Some authors provided little information about their algorithms, which makes it difficult to re-implement the approaches. Consequently, researchers use different implementations of the same recommendations approaches, which might lead to variations in the results. (C) We speculated that minor variations in datasets, algorithms, or user populations inevitably lead to strong variations in the performance of the approaches. Hence, finding the most promising approaches is a challenge. As a second limitation, we noted that many authors neglected to take into account factors other than accuracy, for example overall user satisfaction. In addition, most approaches (81 %) neglected the user-modeling process and did not infer information automatically but let users provide keywords, text snippets, or a single paper as input. Information on runtime was provided for 10 % of the approaches. Finally, few research papers had an impact on research-paper recommender systems in practice. We also identified a lack of authority and long-term research interest in the field: 73 % of the authors published no more than one paper on research-paper recommender systems, and there was little cooperation among different co-author groups. We concluded that several actions could improve the research landscape: developing a common evaluation framework, agreement on the information to include in research papers, a stronger focus on non-accuracy aspects and user modeling, a platform for researchers to exchange information, and an open-source framework that bundles the available recommendation approaches. [ABSTRACT FROM AUTHOR]

Thus, (3) treats the constraints HT ht and HT ht implicitly, and works solely with the auxiliary support variables I y i . [Extracted from the article]

The paper "Well-behaved Online Load Balancing Against Strategic Jobs" by Li, Li and Wu considers a truthful online load-balancing problem with the objective of the makespan minimization on related machines. The 2019 workshop on models and algorithms for planning and scheduling problems was held in Renesse (The Netherlands). [Extracted from the article]

Significant progress has been made in protein structure prediction in recent years. However, it remains challenging for AlphaFold2 and other deep learning-based methods to predict protein structure with single-sequence input. Here we introduce trRosettaX-Single, an automated algorithm for single-sequence protein structure prediction. It incorporates the sequence embedding from a supervised transformer protein language model into a multi-scale network enhanced by knowledge distillation to predict inter-residue two-dimensional geometry, which is then used to reconstruct three-dimensional structures via energy minimization. Benchmark tests show that trRosettaX-Single outperforms AlphaFold2 and RoseTTAFold on orphan proteins and works well on human-designed proteins (with an average template modeling score (TM-score) of 0.79). An experimental test shows that the full trRosettaX-Single pipeline is two times faster than AlphaFold2, using much fewer computing resources (<10%). On 2,000 designed proteins from network hallucination, trRosettaX-Single generates structure models with high confidence. As a demonstration, trRosettaX-Single is applied to missense mutation analysis. These data suggest that trRosettaX-Single may find potential applications in protein design and related studies., (© 2022. The Author(s), under exclusive licence to Springer Nature America, Inc.)

Since 2000, there have been more than 8000 publications on radiology artificial intelligence (AI). AI breakthroughs allow complex tasks to be automated and even performed beyond human capabilities. However, the lack of details on the methods and algorithm code undercuts its scientific value. Many science subfields have recently faced a reproducibility crisis, eroding trust in processes and results, and influencing the rise in retractions of scientific papers. For the same reasons, conducting research in deep learning (DL) also requires reproducibility. Although several valuable manuscript checklists for AI in medical imaging exist, they are not focused specifically on reproducibility. In this study, we conducted a systematic review of recently published papers in the field of DL to evaluate if the description of their methodology could allow the reproducibility of their findings. We focused on the Journal of Digital Imaging (JDI), a specialized journal that publishes papers on AI and medical imaging. We used the keyword "Deep Learning" and collected the articles published between January 2020 and January 2022. We screened all the articles and included the ones which reported the development of a DL tool in medical imaging. We extracted the reported details about the dataset, data handling steps, data splitting, model details, and performance metrics of each included article. We found 148 articles. Eighty were included after screening for articles that reported developing a DL model for medical image analysis. Five studies have made their code publicly available, and 35 studies have utilized publicly available datasets. We provided figures to show the ratio and absolute count of reported items from included studies. According to our cross-sectional study, in JDI publications on DL in medical imaging, authors infrequently report the key elements of their study to make it reproducible. [ABSTRACT FROM AUTHOR]

Achieving community immunity against the coronavirus disease 2019 (COVID-19) depends on vaccinating the largest number of people within a specific period while taking all precautionary measures. To address this problem, this paper presents a smart parking system that will help the health crisis management committee to vaccinate the largest number of people with the minimum period of time while ensuring that all precautionary measures are followed, through a set of algorithms. These algorithms seek to ensure a uniform distribution of persons in parking. This paper proposes a novel complex system for smart parking and nine algorithms to address the NP-hard problem. The experimental results demonstrate the performance of the proposed algorithms in terms of gap and time. Applying these algorithms to smart cities to ensure precautionary measures against COVID-19 can help fight against this pandemic. [ABSTRACT FROM AUTHOR]

This special issue of Software Tools for Technology Transfer comprises extended versions of selected papers from the 26th edition of the International Conference on Tools and Algorithms for the Construction and Analysis of Systems (TACAS 2020). The focus of this conference series is tools and algorithms for the rigorous analysis of software and hardware systems, and the papers in this special cover the spectrum of current work in this field. [ABSTRACT FROM AUTHOR]

Because of the unique imaging mechanism of infrared (IR) sensors, IR images commonly suffer from blurred edge details, low contrast, and poor signal-to-noise ratio. A new method is proposed in this paper to enhance IR image details so that the enhanced images can effectively inhibit image noise and improve image contrast while enhancing image details. First, for the traditional guided image filter (GIF) applied to IR image enhancement is prone to halo artifacts, this paper proposes a detail enhancement guided filter (DGIF). It mainly adds the constructed edge perception and detail regulation factors to the cost function of the GIF. Then, according to the visual characteristics of human eyes, this paper applies the detail regulation factor to the detail layer enhancement, which solves the problem of amplifying image noise using fixed gain coefficient enhancement. Finally, the enhanced detail layer is directly fused with the base layer so that the enhanced image has rich detail information. We first compare the DGIF with four guided image filters and then compare the algorithm of this paper with three traditional IR image enhancement algorithms and two IR image enhancement algorithms based on the GIF on 20 IR images. The experimental results show that the DGIF has better edge-preserving and smoothing characteristics than the four guided image filters. The mean values of quantitative evaluation of information entropy, average gradient, edge intensity, figure definition, and root-mean-square contrast of the enhanced images, respectively, achieved about 0.23%, 3.4%, 4.3%, 2.1%, and 0.17% improvement over the optimal parameter. It shows that the algorithm in this paper can effectively suppress the image noise in the detail layer while enhancing the detail information, improving the image contrast, and having a better visual effect. [ABSTRACT FROM AUTHOR]

These days, cloud computing usage has been increasing with the rapid growth of Internet coverage all over the world to serve as a pay-per-use model using shared computing resources. Internet of Things (IoT) is a growing technology which is used in different applications and it needs cloud computing however the distance between cloud computing resources and the end system in IoT can cause a delay which is intolerable for delay-sensitive applications. Fog computing is a computing resource between cloud computing and end system to reduce the delay for the delay-sensitive applications in IoT. Therefore, load balancing functionality is a significant role to provide the required quality of service (QoS), quality of experience (QoE), and performance. Load balancing can be done based on response time, throughput, energy consumption, and utilization metrics. In this paper, the papers published in Elsevier, ACM, IEEE, Springer and Wiley between 2018 and 2022 have been examined to extract the load-balancing algorithms, system architecture, tools and applications, advantages and disadvantages. This review is useful for those working on load-balancing performance improvement. [ABSTRACT FROM AUTHOR]

Background: Understanding the impact of a publication by using bibliometric indices becomes an essential activity not only for universities and research institutes but also for individual academicians. This paper aims to provide a brief review of the current bibliometric tools used by authors and editors and proposes an algorithm to assess the relevance of the most common bibliometric tools to help the researchers select the fittest journal and know the trends of published submissions by using self-evaluation. Methods: We present a narrative review answering at least two related consecutive questions triggered by the topics mentioned above. How prestigious is a journal based on its most recent bibliometrics, so authors may choose it to submit their next manuscript? And, how can they self-evaluate/understand the impact of their whole publishing scientific life? Results: We presented the main relevant definitions of each bibliometrics and grouped them in those oriented to evaluated journals or individuals. Also, we share with our readers our algorithm to assess journals before manuscript submission. Conclusions: Since there is a journal performance market and an article performance market, each one with its patterns, an integrative use of these metrics, rather than just the impact factor alone, might represent the fairest and most legitimate approach to assess the influence and importance of an acceptable research issue, and not only a sound journal in their respective disciplines. [ABSTRACT FROM AUTHOR]

This note tries to answer issues raised in Bhardwaj and Kumar (J Optim Theory Appl 163(2): 685-696, 2014). The research summarizes that the results obtained in Khan et al. (J Optim Theory Appl 159: 536-546, 2013) are sound and correct and it fulfills all the necessary requirements of its scope and objectives. [ABSTRACT FROM AUTHOR]

This paper introduces an innovative method to improve loop closure detection within the domain of Simultaneous Localization And Mapping (SLAM) by integrating a Multi-Scale Attention and Semantic Guidance (MSA-SG) framework. In SLAM systems, accurate loop closure detection is essential for minimizing localization errors over time and ensuring the reliability of the constructed maps in robotics navigation through uncharted environments. Our proposed method utilizes EfficientNet-EA for robust feature extraction and introduces MSA-SG, a novel mechanism that synergizes multiscale attention with semantic guidance to focus on critical semantic features essential for loop closure detection. This approach ensures the prioritization of static environmental landmarks over transient and irrelevant objects, significantly enhancing the accuracy and efficiency of loop closure detection in complex and dynamic settings. Experimental validations on recognized datasets underscore the superiority of our approach, demonstrating marked improvements in precision, recall, and overall SLAM performance. This research highlights the significant benefits of leveraging semantic insights and attentional focus in advancing the capabilities of loop closure detection for SLAM applications. [ABSTRACT FROM AUTHOR]

Manual term extraction is similar to literal meaning: A translator browses text, classifies words, and prepares for translation. Terminology, as a centralized carrier of expertise, creation, popularization, and disappearance, dynamically reflects the development and evolution of an industry. The automatic extraction of terminology is a key technology for creating a professional terminology database, and it is also a key topic in the field of natural language processing. The purpose of this paper is to study how to analyse a term extraction algorithm based on machine learning and a comprehensive feature strategy. Focusing on the problems of poor generality and single statistical features of current term extraction algorithms, this paper proposes an improved domain ontology term extraction algorithm based on a comprehensive feature strategy. Moreover, automatic term extraction experiments based on a word-based maximum entropy model and a conditional random field model based on machine learning are conducted in this paper. Its word-based conditional random field model outperforms the maximum entropy model. The experimental results show that the algorithm based on the comprehensive feature strategy improves the accuracy by 8.6% compared with the TF-IDF algorithm and the C-value term extraction algorithm. This algorithm can be used to effectively extract the terms in a text and has good generality. [ABSTRACT FROM AUTHOR]

Unmanned Aerial Vehicles are useful tools for many applications. However, autonomous path planning for Unmanned Aerial Vehicles in unfamiliar environments is a challenging problem when facing a series of problems such as poor consistency, high influence by the native controller of the Unmanned Aerial Vehicles. In this paper, we investigate reinforcement learning-based autonomous local path planning methods for Unmanned Aerial Vehicles with high autonomous decision-making capability and locally high portability. We propose an autonomous local path planning algorithm based on the TD3 strategy to solve the problem of local obstacle avoidance and path planning in unfamiliar environments using autonomous decision-making of Unmanned Aerial Vehicles. The simulation results on Gazebo show that our method can effectively realize the autonomous local path planning task for Unmanned Aerial Vehicles, the success rate of path planning with our method can reach 93% under the interference of no obstacles, and 92% in the environment with obstacles. Finally, our method can be used for autonomous path planning of Unmanned Aerial Vehicles in unfamiliar environments. [ABSTRACT FROM AUTHOR]

This special issue of Algorithmica features six papers that were presented at the 16th International Conference and Workshops on Algorithms and Computation (WALCOM 2022) held in Indonesia. The selected papers were chosen based on their merits and relevance to Algorithmica, and have undergone a rigorous refereeing process. The papers cover a range of topics, including the complexity of Maximum Happy Set on different types of graphs, covering graphs with vertex disjoint paths, the influence immunization problem on networks, L(p,q)-edge-labeling, motion planning frameworks, and the Minimum Membership Dominating Set problem. The authors, reviewers, and editors are acknowledged for their contributions, and Springer Nature remains neutral in terms of jurisdictional claims and affiliations. [Extracted from the article]

Refereed conferences require every submission to be reviewed by members of a program committee (PC) in charge of selecting the conference program. There are many software packages available to manage the review process. Typically, in a bidding phase PC members express their personal preferences by ranking the submissions. This information is used by the system to compute an assignment of the papers to referees (PC members). We study the problem of assigning papers to referees. We propose to optimize a number of criteria that aim at achieving fairness among referees/papers. Some of these variants can be solved optimally in polynomial time, while others are NP-hard, in which case we design approximation algorithms. Experimental results strongly suggest that the assignments computed by our algorithms are considerably better than those computed by popular conference management software. [ABSTRACT FROM AUTHOR]

In this work, an improved moth-flame optimization algorithm is proposed to alleviate the problems of premature convergence and convergence to local minima. From the perspective of diversity, an inertia weight of diversity feedback control is introduced in the moth-flame optimization to balance the algorithm's exploitation and global search abilities. Furthermore, a small probability mutation after the position update stage is added to improve the optimization performance. The performance of the proposed algorithm is extensively evaluated on a suite of CEC'2014 series benchmark functions and four constrained engineering optimization problems. The results of the proposed algorithm are compared with the ones of other improved algorithms presented in literatures. It is observed that the proposed method has a superior performance to improve the convergence ability of the algorithm. In addition, the proposed algorithm assists in escaping the local minima. [ABSTRACT FROM AUTHOR]

The Distributed power flow controller can be considered as advance power flow controller which is combination of series and shunt compensator without DC link. In this paper Space vector Pulse width Modulation employs in Distributed power flow Controller for Harmonics Reduction and power quality improvement. A new technique SVPWM adopted which reduces the harmonics and the same time improves power quality and increase transient stability. In this paper a new technique of Multi objective Grey wolf algorithm used to optimize the controller parameter of DPFC. For the design of PI controller GWO algorithm can be used for better optimistic performance of DPFC. As a result of that power quality and voltage profile improves drastically and the same time harmonics also reduced remarkable level of 4.62% of Voltage THD and 1.8% of current THD. The simulation result and hardware model Prove the feasibility of proposed Configuration. [ABSTRACT FROM AUTHOR]

Human pose estimation is an important task in computer vision, which can provide key point detection of human body and obtain bone information. At present, human pose estimation is mainly utilized for detection of large targets, and there is no solution for detection of small targets. This paper proposes a multi-channel spatial information feature based human pose (MCSF-Pose) estimation algorithm to address the issue of medium and small targets inaccurate detection of human key points in scenarios involving occlusion and multiple poses. The MCSF-Pose network is a bottom-up regression network. Firstly, an UP-Focus module is designed to expand the feature information while reducing parameter computation during the up-sampling process. Then, the channel segmentation strategy is adopted to cut the features, and the feature information of multiple dimensions is retained through different convolutional groups, which reduces the parameter lightweight network model and makes up for the loss of the feature information associated with the depth of the network. Finally, the three-layer PANet structure is designed to reduce the complexity of the model. With the aid of the structure, it also to improve the detection accuracy and anti-interference ability of human key points. The experimental results indicate that the proposed algorithm outperforms YOLO-Pose and other human pose estimation algorithms on COCO2017 and MPII human pose datasets. [ABSTRACT FROM AUTHOR]

In response to the challenges of accurately identifying event triggers and elements in long texts related to aquaculture, existing models struggle to differentiate between elements and triggers, as well as effectively recognize complete entity texts. To tackle this issue, this study proposes an algorithm for extracting fish disease events based on pseudo triggers and augmented event element data. The method starts by constructing pseudo samples using the original dataset. Two types of noise datasets are then generated: a trigger noise dataset constructed based on fish disease triggers and an entity noise dataset with varying levels of entity noise constructed based on fish disease entities. Next, three parallel neural networks are deployed to extract sample features from these datasets. The fish disease event extraction for the source dataset employs multi-label classification. For the trigger noise dataset, the sample features are activated using the sigmoid function, and the MRSE loss is utilized for optimization of this branch. For the entity noise dataset, the sample features are activated using the Relu function, and the XOR loss is used for optimization. Finally, the losses from the three branches are combined with weighted summation to obtain the fusion loss. The experimental results on the fish disease dataset used in this paper show that the proposed algorithm achieves an average accuracy of 78.71%, 78.95%, and 79.43% on F1, recall, and precision, respectively, which is a maximum improvement of 11.201%, 11.849%, and 12.421% in accuracy with respect to the baseline model on F1, recall, and precision, respectively. [ABSTRACT FROM AUTHOR]

Cloud model similarity algorithm is an important part of cloud modelling theory. Most of the existing cloud model similarity algorithms suffer from poor discriminability, poor classification, unstable results, and low time efficiency. In this paper, a new similarity algorithm is proposed that considers the triangular cloud model distance and shape. First, according to the D T distance formula, a new exponential closeness measure is defined, with which the distance similarity of cloud models is characterized. Then, the shape similarity is calculated according to the variance of the cloud model cloud drops. Finally, the two similarities are synthesized to define a similarity algorithm for determining the distance from the D T distance formula and shape based on the triangular cloud model (DDTSTCM). In this paper, discriminability, stability, efficiency and theoretical interpretability are taken as the evaluation indices. Equipment security system capability evaluation experiment, cloud model differentiation simulation experiment and time series classification accuracy experiment are set up to verify the effectiveness of the algorithm in terms of the four above aspects. The experimental results show that DDTSTCM has good differentiation and excellent classification effects. In the classification experiment for the time series, the average classification accuracy of DDTSTCM reaches 91.78%, which is at least 2.78% higher than those of the other seven commonly used algorithms. The CPU running efficiency of DDTSTCM is also extremely high, and the average CPU running time of group training is always on the order of milliseconds, which effectively reduces the time cost. Finally, a case study is conducted to analyse a risk assessment problem for China's island microgrid industry, and the evaluation results based on DDTSTCM are in line with human cognition and have good value for engineering applications. [ABSTRACT FROM AUTHOR]

Aiming at the received signal strength index (RSSI) in wireless positioning system, an improved weighted KNN fingerprint positioning algorithm is proposed in this paper. The algorithm pre-processes fingerprint data in offline stage that including eliminating outliers and Kalman filtering first, in order to improve the accuracy of data acquisition. Secondly, the fingerprint data is partitioned by using RSSI to attenuate obstacles such as walls. Then, points with significant RSSI differences in each region are selected as regional feature points, and the distance between RSSI of test points and feature points in each region is calculated respectively to determine the region in which the test points are located. Geometric method is used to analyse and define the correlation degree, and KNN is re-weighted to achieve accurate positioning in the region. Finally, experiments were carried out in the indoor environment to complete the establishment of the fingerprint database. Compared with the existing NN, KNN and WKNN, the experimental analysis results show that the accumulated error and average error are better than the traditional algorithm with the increase of measurement points, which has reference value for the complex environment positioning technology. [ABSTRACT FROM AUTHOR]

This research paper presents a comprehensive study of the simultaneous localization and mapping (SLAM) algorithm for robot localization and navigation in unknown environments. The SLAM algorithm is a widely used approach for building a map of an environment and estimating the robot's position within it, which is especially useful in dynamic and unstructured environments. The paper discusses various SLAM techniques, including the Kalman filter (KF) and GraphSLAM algorithms, and their use in probabilistic estimation of the robot's position and orientation. The paper also explores different path-planning techniques that can be used with the map created by the SLAM algorithm to generate collision-free paths for the robot to navigate toward its goal. The paper also discusses recent advances in deep learning-based SLAM algorithms and their applications in indoor navigation with ORB and RGB-D cameras. The research concludes that SLAM-based robot localization and navigation algorithms are a promising approach for robots navigating in unstructured environments and present various opportunities for future research. [ABSTRACT FROM AUTHOR]

Breast cancer (BC) is the leading cause of death among women worldwide. It affects in general women older than 40 years old. Medical images analysis is one of the most promising research areas since it provides facilities for diagnosis and decision-making of several diseases such as BC. This paper conducts a Structured Literature Review (SLR) of the use of Machine Learning (ML) and Image Processing (IP) techniques to deal with BC imaging. A set of 530 papers published between 2000 and August 2019 were selected and analyzed according to ten criteria: year and publication channel, empirical type, research type, medical task, machine learning techniques, datasets used, validation methods, performance measures and image processing techniques which include image pre-processing, segmentation, feature extraction and feature selection. Results showed that diagnosis was the most used medical task and that Deep Learning techniques (DL) were largely used to perform classification. Furthermore, we found out that classification was the most ML objective investigated followed by prediction and clustering. Most of the selected studies used Mammograms as imaging modalities rather than Ultrasound or Magnetic Resonance Imaging with the use of public or private datasets with MIAS as the most frequently investigated public dataset. As for image processing techniques, the majority of the selected studies pre-process their input images by reducing the noise and normalizing the colors, and some of them use segmentation to extract the region of interest with the thresholding method. For feature extraction, we note that researchers extracted the relevant features using classical feature extraction techniques (e.g. Texture features, Shape features, etc.) or DL techniques (e. g. VGG16, VGG19, ResNet, etc.), and finally few papers used feature selection techniques in particular the filter methods. [ABSTRACT FROM AUTHOR]

Published scientific articles are linked together into a graph, the citation graph, through their citations. This paper explores the notion of similarity based on connectivity alone, and proposes several algorithms to quantify it. Our metrics take advantage of the local neighborhoods of the nodes in the citation graph. Two variants of link-based similarity estimation between two nodes are described, one based on the separate local neighborhoods of the nodes, and another based on the joint local neighborhood expanded from both nodes at the same time. The algorithms are implemented and evaluated on a subgraph of the citation graph of computer science in a retrieval context. The results are compared with text-based similarity, and demonstrate the complementarity of link-based and text-based retrieval. [ABSTRACT FROM AUTHOR]

This paper proposes a weakly-supervised structural surface crack detection algorithm that can detect the crack area in an image with low data labeling cost. The algorithm consists of a convolutional neural networks Vgg16-Crack for classification, an improved and optimized class activation map (CAM) algorithm for accurately reflecting the position and distribution of cracks in the image, and a method that combines superpixel segmentation algorithm simple linear iterative clustering (SLIC) with CAM for more accurate semantic segmentation of cracks. In addition, this paper uses Bayesian optimization algorithm to obtain the optimal parameter combination that maximizes the performance of the model. The test results show that the algorithm only requires image-level labeling, which can effectively reduce the labor and material consumption brought by pixel-level labeling while ensuring accuracy. [ABSTRACT FROM AUTHOR]

In cloud-based recommendation system, the feature selection is implemented to reduce the large dimension of the cloud data. The feature selection increases the performance of the recommendation system without affecting the accuracy of the system. In this paper two filter model based algorithms SFS and MSFS are proposed to extract the necessary features for the recommendation system. The state of the art Naive bayes classification algorithm is used to evaluate the performance of the feature selection algorithm. The bench mark datasets Newsgroups, WebKB and Book Crossing are used for performance evaluation. The experimental results show that the proposed algorithm is superior to the existing feature selection algorithms T-Score, Information Gain and Chi squared. [ABSTRACT FROM AUTHOR]

This paper presents a digital image encryption scheme based on multi chaotic system and random DNA coding. Firstly, the initial values and parameter values of 2D Logistic-adjusted-Sine mapping (2D-LASM) and Logistic-Sine system (LSS) are obtained from SHA256 hash values of the original image. In the scrambling stage, the chaotic sequences generated by 2D-LASM are used to get two column scrambling matrices and row scrambling matrix, respectively. The elements of the second column scrambling matrix and row scrambling matrix are used as row and column coordinates in the scrambling process. Then apply it to scrambling the DNA encoded image, which can complete the row and column scrambling at the same time. In the diffusion stage, we proposed a new diffusion method. Through the chaotic sequence generated by the LSS, a DNA coding sequence is obtained. DNA XOR operation is carried out on the central point and horizontal line of the image, and then spread from the central line to the upper and lower directions of the matrix to achieve the purpose of multi-directional diffusion and improve the encryption efficiency. Experimental results and security analysis show that the algorithm executes fast and has strong security. It can resist many attacks, such as statistical attacks, brute attacks, plaintext / select plaintext attacks, etc. [ABSTRACT FROM AUTHOR]

Paper checks may have complex background features including fine lines and patterns, which make forgery more difficult. Also, halftoning techniques are used to produce continuous tones and to prevent copies with void pantograph features. When these kinds of checks are scanned, Moire patterns may occur. These patterns make it difficult for customers to examine the scanned check images on ATM (Automated Teller Machine) displays. They also can decrease the classification accuracy of check recognition systems. In this paper, we propose an algorithm to enhance the perceptual quality of scanned check images by reducing the Moire patterns. The proposed algorithm consists of foreground extraction, Moire detection and Moire removal. Subjective image quality assessment was performed to evaluate the degree of improvement. Experimental results show that the proposed algorithm improves perceptual quality while maintaining check recognition accuracy. [ABSTRACT FROM AUTHOR]

Artificial intelligence is an enabling technology for autonomous surface vehicles, with methods such as evolutionary algorithms, artificial potential fields, fast marching methods, and many others becoming increasingly popular for solving problems such as path planning and collision avoidance. However, there currently is no unified way to evaluate the performance of different algorithms, for example with regard to safety or risk. This paper is a step in that direction and offers a comparative study of current state-of-the art path planning and collision avoidance algorithms for autonomous surface vehicles. Across 45 selected papers, we compare important performance properties of the proposed algorithms related to the vessel and the environment it is operating in. We also analyse how safety is incorporated, and what components constitute the objective function in these algorithms. Finally, we focus on comparing advantages and limitations of the 45 analysed papers. A key finding is the need for a unified platform for evaluating and comparing the performance of algorithms under a large set of possible real-world scenarios. [ABSTRACT FROM AUTHOR]

In industry, the task of defect classification and defect localization is an important part of defect detection system. However, existing studies only focus on one task and it is difficult to ensure the accuracy of both tasks. This paper proposes a defect detection system based on improved Yolo_v4, which greatly improves the detection ability of minor defects. For K_Means algorithm clustering prianchors question with strong subjectivity, the paper proposes the Density Based Spatial Clustering of Applications with Noise (DBSCAN) algorithm to determine the number of Anchors. To solve the problem of low detection rate of small targets caused by insufficient reuse rate of low-level features in CSPDarknet53 feature extraction network, this paper proposes an ECA-DenseNet-BC-121 feature extraction network to improve it. And the Dual Channel Feature Enhancement (DCFE) module is proposed to improve the local information loss and gradient propagation obstruction caused by quad chain convolution in PANet networks to improve the robustness of the model. The experimental results on the fabric surface defect detection datasets show that the mAP of the improved Yolo_v4 is 98.97%, which is 7.67% higher than SSD, 3.75% higher than Faster_RCNN, 10.82% higher than Yolo_v4 tiny, and 5.35% higher than Yolo_v4, and the detection speed reaches 39.4 fps. It can meet the real-time monitoring needs of industrial sites. [ABSTRACT FROM AUTHOR]