Search

This book presents the main results of the 19th Latin American Congress of Automatic Control held in November 2022 in Havana, Cuba. The Congress showed several main research results obtained by researchers from diverse countries in the last four years.Of the papers sent to Congress, 28 were finally accepted for presentation after a rigorous analysis of scientific novelty and quality. For their presentation in this book, the papers were divided into 5 major sections that appear in the following order:Part 1. Robust and Nonlinear ControlThe main research topics addressed in this part are related to fault-tolerant control loops, control by sliding modes, and robust tuning of PID controllers. Examples of electrical motors and chemical processes are used to demonstrate the feasibility of using the proposed techniques.Part 2. Fault Diagnosis in Industrial SystemsFault diagnosis in industrial plants is a very important topic in the Industry 4.0 paradigm.In this part, new techniques of fault diagnosis in mechanical systems using Poincaré features; a real case study for predicting the time of the remaining job cycle at a water treatment plant; and a predictive fault diagnosis for isolated photovoltaic systems are presented. A novel methodology for detecting and locating cyber-attacks in water distribution networks using computational intelligence tools is also presented.Part 3. Robotic and Autonomous SystemsNew control strategies for path following for autonomous tractors and unmanned aquatic vehicles are analyzed in this part. Moreover, the important topic related to the battery health-aware model predictive control planning for autonomous racing vehicles and the use of robots for monitoring and remediation applications are examined.Part 4. Modeling, Identification, and Delayed SystemsA model-based methodology for the efficient selection of centrifugal pumps; the use of probabilistic Boolean networks in smart grid models; the utilization of PSO metaheuristic algorithm in the selection of a model structure; and two schemes to control high-order delayed systems are among the main topics examined in this part.Part 5. Low-Cost Systems and Biomedical ApplicationsIn this part, some applications of low-cost monitoring and control systems and two automatic systems used for the characterization of creatinine in wastes samples during hemodialysis process and differential acquisition of blood pressure are shown.

The book presents high-quality papers from the Eighth Asia International Symposium on Mechatronics (AISM 2021). It discusses the latest technological trends and advances in electromechanical coupling and environmental adaptability design of electronic equipment, sensing and measurement, mechatronics in manufacturing and automations, energy harvesting & storage, robotics, automation and control systems. It includes papers based on original theoretical, practical and experimental simulations, development, applications, measurements, and testing. The applications and solutions discussed in the book provide excellent reference material for future product development.

This book includes selected peer-reviewed papers presented at third International Conference on Computational and Experimental Methods in Mechanical Engineering held in June 2021 at G.L. Bajaj Institute of Technology and Management, Greater Noida, U.P, India. The book covers broad range of topics in latest research including hydropower, heat transfer, fluid mechanics, advanced manufacturing, recycling and waste disposal, solar energy, thermal power plants, refrigeration and air conditioning, robotics, automation and mechatronics, and advanced designs. The authors are experienced and experts in their field, and all papers are reviewed by expert reviewers in respective field. The book is useful for industry peoples, faculties, and research scholars.

This book presents high-quality papers from the Seventh Asia International Symposium on Mechatronics (AISM 2019). It discusses the latest technological trends and advances in electromechanical coupling and environmental adaptability design for electronic equipment, sensing and measurement, mechatronics in manufacturing and automation, micro-mechatronics, energy harvesting & storage, robotics, automation and control systems. It includes papers based on original theoretical, practical and experimental simulations, development, applications, measurements, and testing. The applications and solutions discussed here provide excellent reference material for future product developments.

This book presents high-quality papers from the Seventh Asia International Symposium on Mechatronics (AISM 2019). It discusses the latest technological trends and advances in electromechanical coupling and environmental adaptability design for electronic equipment, sensing and measurement, mechatronics in manufacturing and automation, micro-mechatronics, energy harvesting & storage, robotics, automation and control systems. It includes papers based on original theoretical, practical and experimental simulations, development, applications, measurements, and testing. The applications and solutions discussed here provide excellent reference material for future product developments.

This book gathers high-quality papers presented at the International Symposium on Optomechatronic Technology (ISOT 2018), which was organized by the International Society for Optomechatronics (ISOM) and Centro de Investigaciones en Óptica (CIO) in Cancun, Mexico on November 5–8, 2018. The respective papers address the evolution of optomechatronic devices and systems, and their implementation in problem-solving and various other applications. Moreover, they cover a broad range of topics at the interface of optical, mechanical and electrical technologies and methods.

This book includes selected papers from the Fourth International Conference on Agriculture Digitalization and Organic Production (ADOP 2024), held in Minsk, Belarus during June 05–08, 2024. The topics covered in the book are ground robotic systems in crop production, unmanned aerial vehicles in crop production, aerospace monitoring tools in crop production, robotic animal husbandry, digitalization of technological processes of agricultural production, evaluation of the effectiveness of digital technologies for the production of organic products, rational nature management and ecology in agricultural production, technologies for the production of organic agricultural products, market analysis of organic agricultural products and legal aspects of organic production.

This book gathers the proceedings of the 9th European Conference on Mechanism Science (EuCoMeS), which was held in Padua, Italy, on September 18–20, 2024, under the patronage of IFToMM. It presents the latest research and industrial applications in the areas of mechanism science, robotics, and dynamics. The contributions cover such topics as computational kinematics, control issues in mechanical systems, mechanisms for medical rehabilitation, mechanisms for minimally invasive techniques, cable robots, design issues for mechanisms and robots, and the teaching and history of mechanisms. Written by leading researchers and engineers and selected by means of a rigorous international peer-review process, the papers highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations.

This book features high-quality research papers presented at the International Conference of Mechanical and Robotic Engineering “Congress on Control, Robotics, and Mechatronics” (CRM 2023), jointly organized by Modi Institute of Technology, Kota, India, and Soft Computing Research Society, India, during 25–26 March 2023. This book discusses the topics such as combustion and fuels, controls and dynamics, fluid mechanics, I.C. engines and automobile engineering, machine design, mechatronics, rotor dynamics, solid mechanics, thermodynamics and combustion engineering, composite material, aerodynamics, aerial vehicles, missiles and robots, automatic design and manufacturing, artificial intelligence, unmanned aerial vehicles, autonomous robotic vehicles, evolutionary robotics, humanoids, hardware architecture, industrial robotics, intelligent control systems, microsensors and actuators, multi-robots systems, neural decoding algorithms, neural networks for mobile robots, space robotics, control theory and applications, model predictive control, variable structure control, and decentralized control.

This volume contains selected papers from the Fifth Conference on Maintenance, Condition Monitoring and Diagnostics, MCMD 2021, in Oulu, Finland, collected by editors with years of experiences in condition monitoring, signal processing, advanced reasoning and diagnostics, maintenance, risk assessment, and asset management. This work maximizes reader insights into the current trends in novel technologies and maintenance trends in industrial domains, energy production and energy conservation, mechatronics and robot technologies. These proceedings discuss key issues and challenges in the operation, maintenance and risk management of complex engineering systems and will serve as a valuable resource for condition monitoring and risk management professionals from industry and science exchange knowledge, experiences and strengthen multidisciplinary network those in the field. This book will be of benefit to academia, and industry alike.

This book presents the proceedings of the 4th International Conference of IFToMM ITALY (IFIT), held in Naples, Italy on September 7-9, 2022. It includes peer-reviewed papers on the latest advances in mechanism and machine science, discussing topics such as biomechanical engineering, computational kinematics, the history of mechanism and machine science, gearing and transmissions, multi-body dynamics, robotics and mechatronics, the dynamics of machinery, tribology, vibrations, rotor dynamics and vehicle dynamics. A valuable, up-to-date resource, it offers an essential overview of the subject for scientists and practitioners alike, and will inspire further investigations and research.

This volume consists of selected peer reviewed papers from the 10th International Conference on Mechatronics and Control Engineering (ICMCE 2021) discussing latest advances in mechanical engineering and dynamic analysis, sensor technology and application, mechanical design and system modelling, control system and engineering, robot design and control engineering, development and performance analysis of functional materials. Additional themes include methodologies, algorithms, applications and knowledge discovery in mechatronics and control engineering. This volume will prove a valuable resource for those in academia and industry.

This book covers a variety of topics in the field of mechatronics engineering, with a special focus on innovative control systems and automation concepts for a wide range of applications. Based on a set of papers presented at the 2nd International Conference “Innovation in Engineering”, ICIE, held in Minho, Portugal, on June 28-30, 2022, the chapters report on cutting-edge control algorithms for mobile robots, automatic monitoring systems and intelligent predictive maintenance techniques. They cover advanced scheduling, risk-assessment and decision-making strategies, and their applications in industrial production, training and education, and service organizations. This volume, which belongs to a three-volume set, provides engineering researchers and professionals with a timely overview and extensive information on trends and technologies behind the future developments of mechatronics systems in the era of Industry 4.0.

This book features selected papers presented at the 16th International Conference on Electromechanics and Robotics ‘Zavalishin's Readings'– ER(ZR) 2021, held in St. Petersburg, Russia, on April 14–17, 2021. The contributions, written by professionals, researchers and students, cover topics in the field of automatic control systems, electromechanics, electric power engineering and electrical engineering, mechatronics, robotics, automation and vibration technologies. The Zavalishin's Readings conference was established as a tribute to the memory of Dmitry Aleksandrovich Zavalishin (1900–1968) – a Russian scientist, corresponding member of the USSR Academy of Sciences, and founder of the school of valve energy converters based on electric machines and valve converters energy. The first conference was organized by the Institute of Innovative Technologies in Electromechanics and Robotics at the Saint Petersburg State University of Aerospace Instrumentation in 2006. The 2021 conference was held with XV International Conference “Vibration-2021. Vibration technologies, mechatronics and controlled machines” and VI International Conference “Electric drive, electrical technology and electrical equipment of enterprises“, and was organized by St. Petersburg State University of Aerospace Instrumentation (SUAI), St. Petersburg Federal Research Center of the Russian Academy of Sciences (SPC RAS), Southwest State University (SWSU) and Ufa State Oil Technical University (USPTU).

This book contains high-quality papers presented in the conference Recent Advances in Mechanical Infrastructure (ICRAM 2020) held at IITRAM, Ahmedabad, India, from 21-23 August 2020. The topics covered in this book are recent advances in thermal infrastructure, manufacturing infrastructure and infrastructure planning and design.

This book presents selected peer reviewed papers from the International Conference on Advanced Production and Industrial Engineering (ICAPIE 2019). It covers a wide range of topics and latest research in mechanical systems engineering, materials engineering, micro-machining, renewable energy, industrial and production engineering, and additive manufacturing. Given the range of topics discussed, this book will be useful for students and researchers primarily working in mechanical and industrial engineering, and energy technologies.

This proceedings volume highlights a selection of papers presented at the 7th International Conference on High Performance Scientific Computing, which took place in Hanoi, Vietnam, during March 19-23, 2018. The conference has been organized by the Institute of Mathematics of the Vietnam Academy of Science and Technology, the Interdisciplinary Center for Scientific Computing (IWR) of Heidelberg University and the Vietnam Institute for Advanced Study in Mathematics. The contributions cover a broad, interdisciplinary spectrum of scientific computing and showcase recent advances in theory, methods, and practical applications. Subjects covered include numerical simulation, methods for optimization and control, machine learning, parallel computing and software development, as well as the applications of scientific computing in mechanical engineering, airspace engineering, environmental physics, decision making, hydrogeology, material science and electric circuits.

This book presents selected peer-reviewed papers presented at the International Conference on Innovative Technologies in Mechanical Engineering (ITME) 2019. The book discusses a wide range of topics in mechanical engineering such as mechanical systems, materials engineering, micro-machining, renewable energy, systems engineering, thermal engineering, additive manufacturing, automotive technologies, rapid prototyping, computer aided design and manufacturing. This book, in addition to assisting students and researchers working in various areas of mechanical engineering, can also be useful to researchers and professionals working in various allied and interdisciplinary fields.

This book features selected papers presented at the 15th International Conference on Electromechanics and Robotics “Zavalishin's Readings” – ER(ZR) 2020, held in Ufa, Russia, on 15–18 April 2020. The contributions, written by professionals, researchers and students, cover topics in the field of automatic control systems, electromechanics, electric power engineering and electrical engineering, mechatronics, robotics, automation and vibration technologies. The Zavalishin's Readings conference was established as a tribute to the memory of Dmitry Aleksandrovich Zavalishin (1900–1968) – a Russian scientist, corresponding member of the USSR Academy of Sciences and founder of the school of valve energy converters based on electric machines and valve converters energy. The first conference was organized by the Institute of Innovative Technologies in Electromechanics and Robotics at the Saint Petersburg State University of Aerospace Instrumentation in 2006.

This book comprises select peer-reviewed papers from the International Conference on Emerging Trends in Electromechanical Technologies & Management (TEMT) 2019. The focus is on current research in interdisciplinary areas of mechanical, electrical, electronics and information technologies, and their management from design to market. The book covers a wide range of topics such as computer integrated manufacturing, additive manufacturing, materials science and engineering, simulation and modelling, finite element analysis, operations and supply chain management, decision sciences, business analytics, project management, and sustainable freight transportation. The book will be of interest to researchers and practitioners of various disciplines, in particular mechanical and industrial engineering.

This book gathers selected papers presented at the First International Conference on Renewable Energy and Climate Change (REC 2019), which was held at the Institute of Infrastructure Technology Research and Management (IITRAM) from 1 to 2 February 2019. The topics covered include renewable (green) energy and sources including wind power, hydropower, solar energy, biomass, biofuel, geothermal energy, wave energy, tidal energy, hydrogen & fuel cells, energy storage, new trends and technologies for renewable energies, policies and strategies for renewable energies, smart grids, batteries, and e-mobility, control techniques for renewable energies, hybrid renewable energies, renewable energy research and applications for industries, applications of renewable energies in electrical vehicles and other allied areas, artificial intelligence and machine learning studies for renewable energies, renewable energy systems in smart cities, climate change mitigation, carbon trading, carbon capture andutilization, and carbon dioxide refrigeration systems.

This book features selected papers presented at the 14th International Conference on Electromechanics and Robotics ‘Zavalishin's Readings'– ER(ZR) 2019, held in Kursk, Russia, on April 17–20, 2019. The contributions, written by professionals, researchers and students, cover topics in the field of automatic control systems, electromechanics, electric power engineering and electrical engineering, mechatronics, robotics, automation and vibration technologies. The Zavalishin's Readings conference was established as a tribute to the memory of Dmitry Aleksandrovich Zavalishin (1900–1968) – a Russian scientist, corresponding member of the USSR Academy of Sciences, and founder of the school of valve energy converters based on electric machines and valve converters energy. The first conference was organized by the Institute of Innovative Technologies in Electromechanics and Robotics at the Saint Petersburg State University of Aerospace Instrumentation in 2006. The 2019 conference was held with the XIII International Scientific and Technical Conference “Vibration 2019”, and was organized by Saint Petersburg State University of Aerospace Instrumentation (SUAI), Saint Petersburg Institute for Informatics and Automation of the Russian Academy of Sciences (SPIIRAS) and the Southwest State University (SWSU) in with cooperation Russian Foundation for Basic Research (project No. 19-08-20021).

The book contains high quality papers presented in conference Recent Advances in Mechanical Infrastructure (ICRAM-2019) held at IITRAM, Ahmedabad, India from 20-21 April, 2019.The topics covered in this book are recent advances in thermal infrastructure, manufacturing infrastructure and infrastructure planning and design.

Special topic volume with invited peer reviewed papers only

This book presents the proceedings of the 2023 4th International Symposium on Automation, Mechanical and Design Engineering (SAMDE), held in Nanjing, China, on December 8–10, 2023. It gathers contributions by researchers from several countries on the following topics: digitalized development and use of sustainable products and manufacturing systems, artificial intelligence, automated reasoning, human–robot collaborative interaction, sensors and autonomous sensor systems, cyber-physical control systems, generative design including topology optimization, advanced simulation and modelling, intelligent automation, smart materials, materials processing and factories, and circular economy, etc. The book offers a source of information and inspiration for researchers seeking to improve their work and gather new ideas for future developments.

This volume gathers the latest advances, innovations and applications in the field of cable dynamics and aerodynamics, as presented by leading researchers and engineers at the 3rd International Symposium on Dynamics and Aerodynamics of Cables (ISDAC), held in Rome, Italy on June 15-17, 2023. The contributions encompass topics such as nonlinear cable dynamics, cable structures and moving cables, cable aging, fatigue, degradation and failure mechanisms, laboratory testing of cable dynamics and aerodynamics, computational models for cable dynamics and fluid-structure interaction, cable vibration control, cable driven parallel manipulators, monitoring of cable performance, environmental and anthropic loads on cable structures. The contributions, which were selected through a rigorous international peer-review process, share exciting ideas that will spur novel research directions and foster new multidisciplinary collaborations.

This book presents the proceedings of SIMM 2023, the fifth edition of the International Symposium on Intelligent Manufacturing and Mechatronics. Focusing on “Towards Empowering Technological Transformation”, the book presents studies on the details of technological transformation current trends. Divided into eight parts covering various areas of manufacturing engineering and mechatronics stream, namely intelligent manufacturing, machining technology, mechanical and design, instrumentation and control systems, modelling and simulation, industrial engineering, material, and processing and mechatronics and robotics, the book is a valuable resource for readers wishing to embrace the new era of technological transformation.

This volume gathers the latest advances, innovations and applications in the field of condition monitoring, damage assessment and maintenance engineering, as presented by leading international researchers and engineers at the UNIfied Conference of DAMAS (International Conference on Damage Assessment of Structures), IncoME (International Conference on Maintenance Engineering) and TEPEN (The Efficiency and Performance Engineering) Conferences, held in Huddersfield, UK on August 29 – September 1, 2023. Topics include machinery dynamics, sensors and measurement systems, signal processing, structural damage identification and machine fault diagnosis, plant maintenance and reliability, machine health monitoring, asset management, life-cycle cost optimisation, prognostics and health management, maintenance performance measurement, manufacturing process monitoring, and robot-based monitoring and diagnostics. The contributions, which were selected through a rigorous internationalpeer-review process, share exciting ideas that will spur novel research directions and foster new multidisciplinary collaborations.

Since its beginning the International Conference on Applied Sciences and Advanced Technology (ICASAT) was planned as a multidisciplinary space and as a platform to explore the frontiers of knowledge in different areas such as Machine Vision, Biotechnology, Computer Sciences, Mechatronics and, Sustainability. Also, a multidisciplinary perspective is required in all aspects of science, engineering, and research, moving towards a more complete overview of recent advances. On its third edition, ICASAT received works focused on the Trends and Challenges for Global Sustainable Development. This book is a collection of the works presented during ICASAT 2023.

In an era where technological advancements are not just tools but partners in our workspaces, Modern Technologies and Tools Supporting the Development of Industry 5.0 emerges as a seminal guide to understanding and navigating the complexities of the Fifth Industrial Revolution. This book, a collective work of expert authors, delves into the heart of Industry 5.0, exploring how it synergizes human creativity with robotic precision to redefine industrial landscapes. From collaborative robotics to sustainable development, each chapter unfolds layers of knowledge essential for professionals, academics, and students alike.Features• Covers modern technologies including artificial intelligence, robotics, and the Internet of Everything for modernizing Industry 5.0 and the transformative role of collaborative robots in the workplace and how they are changing the dynamics of human labour.• Focuses on technologies mimicking human behaviour and reasoning to solve complex problems and explores the evolving role of human expertise in an increasingly automated world and the competencies needed to thrive in this new era.• Showcases the impact of Industry 5.0 on the environment, and industry commitment to sustainable development by laying a map to understand how Industry 5.0 is steering industries towards sustainable practices, focusing on green supply chains, reverse logistics, and the critical role of internal audits.• Highlights future perspectives such as smart manufacturing and the Industrial Internet of Things (IIoT) for Industry 5.0 manufacturing processes and provides insights into the challenges and security concerns as industries prepare to adopt Industry 5.0, offering foresight into its long-term impacts on global markets and societies.• Presents real-time case studies on tools, technologies, architecture, and product outcomes for Industry 5.0. Modern Technologies and Tools Supporting the Development of Industry 5.0 is more than a book; it's a roadmap for the future, guiding readers through the intricacies of industrial evolution. It is primarily written for senior undergraduate and graduate students and academic researchers in the fields of industrial engineering, production engineering, mechanical engineering, and aerospace engineering.

This book introduces methods for bin picking in manufacturing. These methods can be used to develop unified, dexterous, and robust bin picking systems for entangled objects. The target objects include both rigid and deformable objects. Robotic bin picking is a valuable task in manufacturing, aiming to automate the assembly process by utilizing robots to pick necessary objects from disorganized bins. Previous studies have addressed various challenges related to bin picking. However, when objects with complex shapes or deformable properties are randomly placed in a bin, they tend to get entangled, making it difficult for the robot to pick up individual items. This poses challenges in perception, as the robot must be capable of distinguishing between isolated objects and potentially tangled ones in a cluttered environment. This book is of interest to students, researchers, and professionals in manufacturing industries.

The first part of the Machine Tools and Production Systems Compendium presents the wide range of machine tools and a comprehensive overview of different machine types. Based on the categorization of manufacturing processes according to the German standard DIN 8580, the different areas of application of machine tools are delineated and the various machine designs, the mechanical structure as well as the functions of the machine types are explained. Numerous three-dimensional illustrations of the principles, color photos, section drawings and schematic diagrams supplement the explanations and provide visual support. First, the machine types for the different manufacturing processes are described — before the multi-machine systems are explained. This is followed by a detailed presentation of the various equipment components of machine tools. In the last newly introduced chapter, the volume is concluded by a comprehensive and detailed explanation of three design examples of selected machine tools based on assembly drawings.The German Machine Tools and Production Systems Compendium has been completely revised. The previous five-volume series has been condensed into three volumes in the new ninth edition with colored technical illustrations throughout. This first English edition is a translation of the German ninth edition.

This book offers a collection of original peer-reviewed contributions presented at the 10th International Congress on Design and Modeling of Mechanical Systems (CMSM'2023), held on December 18-20, 2023, in Hammamet, Tunisia. It reports on a wide spectrum of research findings, advanced methods and industrial applications relating to mechanical system behavior and vibration analysis. A special emphasis is given to numerical modeling and CFD simulation. Moreover, the book covers a set of industrial engineering problems and solutions, and applications of machine learning and artificial intelligence, e.g. in predictive main timely snapshot, and a useful resource for both researchers and professionals in the field of design and modeling of mechanical systems.tenance. Continuing on the tradition of the previous editions, and with a good balance of theory and practice, this first volume of a 2-volume set offers a timely snapshot, and a useful resource for both researchers and professionals in the field of design and modeling of mechanical systems.

This volume gathers the latest advances, innovations and applications in the field of condition monitoring, damage assessment and maintenance engineering, as presented by leading international researchers and engineers at the UNIfied Conference of DAMAS (International Conference on Damage Assessment of Structures), IncoME (International Conference on Maintenance Engineering) and TEPEN (The Efficiency and Performance Engineering) Conferences, held in Huddersfield, UK on August 29 – September 1, 2023. Topics include machinery dynamics, sensors and measurement systems, signal processing, structural damage identification and machine fault diagnosis, plant maintenance and reliability, machine health monitoring, asset management, life-cycle cost optimisation, prognostics and health management, maintenance performance measurement, manufacturing process monitoring, and robot-based monitoring and diagnostics. The contributions, which were selected through a rigorous internationalpeer-review process, share exciting ideas that will spur novel research directions and foster new multidisciplinary collaborations.

This book presents the proceedings of the XVI International Conference on Vibration Engineering and Technology of Machinery (VETOMAC 2021). It gathers the latest advances, innovations, and applications in the field of vibration and technology of machinery. Topics include concepts and methods in dynamics, dynamics of mechanical and structural systems, dynamics and control, condition monitoring, machinery and structural dynamics, rotor dynamics, experimental techniques, finite element model updating, industrial case studies, vibration control and energy harvesting, and MEMS. The contributions, which were selected through a rigorous international peer-review process, share exciting ideas that will spur novel research directions and foster new multidisciplinary collaborations. The book is useful for the researchers, engineers and professionals working in the area of vibration engineering and technology of machinery.

This book provides readers with up-to-date advances in applied and interdisciplinary engineering science and technologies related to nonlinear dynamics, vibration, control, robotics, and their engineering applications, developed in the most recent years. All the contributed chapters come from active scholars in the area, which cover advanced theory and methods, innovative technologies, benchmark experimental validations and engineering practices. Readers would benefit from this state-of-the-art collection of applied nonlinear dynamics, in-depth vibration engineering theory, cutting-edge control methods and technologies and definitely find stimulating ideas for their on-going R&D work. This book is intended for graduate students, research staff, and scholars in academics and also provides useful hand-up guidance for professionals and engineers in practical engineering missions.

Production processes and engineered systems use continuous and discrete variables, as well as the combination of continuous and sequential operations. This volume covers both aspects, thus providing knowledge in continuous and discrete control, logic control, and hybrid control systems. It is a compilation of selected control strategies to automate processes and systems with a practical approach to ease their design, analysis and implementation. The selection of the control schemes is based on the capability to provide desired dynamical response or real time performance. Practicality is required for achieving faster development times of automation projects or system prototypes by comprehensive presentation and direct application of methodologies and techniques for efficient and structured programming of control algorithms. Considered methodologies include model-based design, hardware in the loop simulations and structured programming. Fundamental signals and systems concepts are explained. Systems and controllers are analyzed using discrete-time equations, which ease their implementation in most programmable platforms without requiring sophisticated software. PID based control, internal model control and model reference control are viewed as powerful schemes in terms of performance and suitability for mechatronics systems because of the use of the model in their architecture as a key control element. Finite state machines are presented to solve sequential requirements of direct and supervisory control of many processes and machines. Cyberphysical systems are an industrial technology and an education trend, distinguished by visual and dynamic models or digital twins of the physical systems. The discussed analysis, design and implementation practices are integrated and applied in the context of cyberphysical systems. This book aims to provide multidisciplinary support to engineers and practitioners in the design of control systems, and is a valuable tool for automation teaching and self-learning.

This book gathers the proceedings of the 16th IFToMM World Congress, which was held in Tokyo, Japan, on November 5–10, 2023. Having been organized every four years since 1965, the Congress represents the world's largest scientific event on mechanism and machine science (MMS). The contributions cover an extremely diverse range of topics, including biomechanical engineering, computational kinematics, design methodologies, dynamics of machinery, multibody dynamics, gearing and transmissions, history of MMS, linkage and mechanical controls, robotics and mechatronics, micro-mechanisms, reliability of machines and mechanisms, rotor dynamics, standardization of terminology, sustainable energy systems, transportation machinery, tribology and vibration. Selected by means of a rigorous international peer-review process, they highlight numerous exciting advances and ideas that will spur novel research directions and foster new multidisciplinary collaborations.

This book presents the proceedings of the XVI International Conference on Vibration Engineering and Technology of Machinery (VETOMAC 2021). It gathers the latest advances, innovations, and applications in the field of vibration and technology of machinery. Topics include concepts and methods in dynamics, dynamics of mechanical and structural systems, dynamics and control, condition monitoring, machinery and structural dynamics, rotor dynamics, experimental techniques, finite element model updating, industrial case studies, vibration control and energy harvesting, and MEMS. The contributions, which were selected through a rigorous international peer-review process, share exciting ideas that will spur novel research directions and foster new multidisciplinary collaborations. The book is useful for the researchers, engineers and professionals working in the area of vibration engineering and technology of machinery.

This book reports on advanced strategies to design, modeling and testing morphing wings for aeronautical applications. Covering the major outcomes of the multidisciplinary project “Smart Morphing & Sensing” (H2020 N° 723402 SMS), funded by the European Union between 2017 and 2020, it presents a complete set of theories and methods that have been used and developed to integrate novel electroactive actuators and sensors in wings, for the purpose of increasing their aerodynamic efficiency and attenuate vibrations and noise. Topics include: integrated aeroelastic design of morphing wings using high-fidelity computational fluid dynamics and structural mechanics, distributed sensing using a new generation of high-fidelity fiber optics sensors, and controller design by appropriate flight control commands. Further, the book reports on advanced experimental techniques to validate novel actuation and sensing systems on the built prototypes via wind tunnel tests at subsonic (take-offand landing) and transonic (cruise) speeds. All in all, this volume provides readers with extensive and timely information on research and developments of bioinspired aircraft wings.

This volume gathers the latest advances, innovations and applications in the field of cable robots, as presented by leading international researchers and engineers at the 6th International Conference on Cable-Driven Parallel Robots (CableCon), held in Nantes, France on June 25-28, 2023. It covers the theory and applications of cable-driven parallel robots, including their classification, kinematics and singularity analysis, workspace, statics and dynamics, cable modeling and technologies, control and calibration, design methodologies, hardware development, experimental evaluation and prototypes, as well as application reports and new application concepts. The contributions, which were selected through a rigorous international peer-review process, share exciting ideas that will spur novel research directions and foster new multidisciplinary collaborations.

This book focuses on state-of-the-art sensing and automation technologies for field crops and in-house product production and provides a lot of innovative knowledge on image processing, AI algorithms and applications in agriculture, and robotics. This book provides undergraduate or graduate students with take-away knowledge for unmanned agricultural production, including but not limited to corn disease detection, wheat head detection and counting, and soil nutrient condition monitoring. The first three chapters focus on reviewing plant phenotyping sensing technology and robotics and soil nutrient monitoring, followed by in-house crop sensing robotics. Then two case studies on corn and the other two case studies on wheat are presented.

This book presents the proceedings of the 11th IFToMM International Conference on Rotordynamics, held in Beijing, China on 18-21 September 2023. This conference is a premier global event that brings together specialists from the university and industry sectors worldwide in order to promote the exchange of knowledge, ideas, and information on the latest developments and applied technologies in the dynamics of rotating machinery. The coverage is wide ranging, including, for example, new ideas and trends in various aspects of bearing technologies, issues in the analysis of blade dynamic behavior, condition monitoring of different rotating machines, vibration control, electromechanical and fluid-structure interactions in rotating machinery, rotor dynamics of micro, nano and cryogenic machines, and applications of rotor dynamics in transportation engineering. Since its inception 32 years ago, this conference has become an irreplaceable point of reference for those workingin the field and this book reflects the high quality and diversity of content that the conference continues to guarantee.

This book presents the proceedings of the 11th IFToMM International Conference on Rotordynamics, held in Beijing, China on 18-21 September 2023. This conference is a premier global event that brings together specialists from the university and industry sectors worldwide in order to promote the exchange of knowledge, ideas, and information on the latest developments and applied technologies in the dynamics of rotating machinery. The coverage is wide ranging, including, for example, new ideas and trends in various aspects of bearing technologies, issues in the analysis of blade dynamic behavior, condition monitoring of different rotating machines, vibration control, electromechanical and fluid-structure interactions in rotating machinery, rotor dynamics of micro, nano and cryogenic machines, and applications of rotor dynamics in transportation engineering. Since its inception 32 years ago, this conference has become an irreplaceable point of reference for those workingin the field and this book reflects the high quality and diversity of content that the conference continues to guarantee.

This book gathers the proceedings of the 16th IFToMM World Congress, which was held in Tokyo, Japan, on November 5–10, 2023. Having been organized every four years since 1965, the Congress represents the world's largest scientific event on mechanism and machine science (MMS). The contributions cover an extremely diverse range of topics, including biomechanical engineering, computational kinematics, design methodologies, dynamics of machinery, multibody dynamics, gearing and transmissions, history of MMS, linkage and mechanical controls, robotics and mechatronics, micro-mechanisms, reliability of machines and mechanisms, rotor dynamics, standardization of terminology, sustainable energy systems, transportation machinery, tribology and vibration. Selected by means of a rigorous international peer-review process, they highlight numerous exciting advances and ideas that will spur novel research directions and foster new multidisciplinary collaborations.Chapter “The Motion Suspension System – MSS: A Cable-Driven System for On-Ground Tests of Space Robots” is available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.

This book provides select proceedings of the 3rd International Conference on Applied Mechanics and Mechanical Engineering (ICAMME 2022). It covers the latest research in the fields of mechanics and mechanical engineering. Various topics covered in this book are engineering design, machinery and machine elements, mechanical structures and stress analysis, automotive engineering, engine technology, aerospace technology and astronautics, mechanical intelligent control and robotics, mechatronics, dynamical systems and control, fluid mechanics, industrial manufacturing and applied mechanics. The book will be useful for researchers and professionals working in the various fields of mechanical engineering.

Gathering the proceedings of the 6th IFToMM International Conference on Mechanisms, Transmissions, and Applications (MeTrApp), held in Poitiers, France, on May 24-26, 2023, this volume covers topics such as mechanism and machinery design, parallel manipulators, robotics and mechatronics, control applications, mechanical transmissions, cam and gear mechanisms, and dynamics of machinery. MeTrApp 2019 provided researchers, scientists, industry experts, and graduate students from around the globe with a platform to share their cutting-edge work on mechanisms, transmissions, and their applications. The proceedings extend this platform to all researchers, scientists, industry experts, and students interested in these fields.

This book comprises the proceedings of the 2nd International Conference on Future Technologies in Manufacturing, Automation, Design and Energy 2021. The contents of this book focus on recent technological advances in the field of manufacturing, automation, design and energy. Some of the topics covered include additive manufacturing, renewable energy resources, design automation, process automation and monitoring, etc. This book proves to be a valuable resource for those in academia and industry.

The block diagrams as engineering means for closed loop control, which have been established by classic control theory for decades, are replaced in the above mentioned book by networks, the signals are replaced by data. It corresponds to the „Industry 4.0“ and to the structure of today's automatic control systems. Thereby a classic closed loop is treated not isolated from other elements of nowadays automation like bus communication and process logical control, and is completed in proposed book with new control elements, so called data stream managers (DSM). The proposed book treats the control theory systematically like it is done in classical books considering the new concept of data management. The theory is accompanied in the book with examples, exercises with solutions and MATLAB®-simulations.

Aircraft safety is a function of several parameters including flight stability and control. An air vehicle must be stable if it is to remain in flight. Moreover, it must be controllable as well as trimmable. This book delivers the fundamental concepts of stability and control, as well as their associated areas. It explains airworthiness, dynamic and static stability, longitudinal, lateral, and directional control, flight measurement devices and sensors, and control surfaces which are necessary topics to be considered during the aircraft design process. This book is mainly focused on air vehicles'stability features and control capabilities. The aircraft addressed in this book is a rigid-body point mass object. Describing the complete motion of a rigid-body aircraft, this book covers equations of motion with six degrees of freedom (DOF)