Search

Commercial demands and increasing global competition have led to enormous mechanical evolution over recent years. Twin-wires, wide-nip presses, steam boxes and speed sizers have all played a part in improving both the productivity and quality of paper and board products. With the emphasis on mechanical and electrical engineering and the ever increasing pressures of quality measurement and control, little time has been available within a technical department for much reflection on the chemistry of the process. Thus there is a growing trend for the management of the wet-end to be delegated to the chemical supplier. The advances in scale of paper manufacture, environmental sensitivity and higher quality of end-product requirements have all had an impact on the chemistry of the wet-end. The increased production means, for example, that down time is more of an anathema now when capacity is critical. Similarly, with the greater rigours of quality management, anything which causes breaks or holes must be eradicated. Environmental pressures too are growing on the papermaking process. Even if consideration is restricted to only the closure of the white water circuit, it alone throws down a challenge to the potency of biocides, retention aids and other chemicals. These chemicals are detriment­ ally affected by an increasing concentration of water soluble pulp extractives and surfactants, adhesives and polysaccharides from broke and recycled paper.

With the exception of a slight hiccup during the height of the recent environmental movement (during the early 1990s), when for a year or two consumers were prepared to pay a price premium for lower quality recycled paper than for the virgin product, the inexorable improvement in the quality demanded of paper products continues. This demand for quality covers not only the aesthetics ofthe product but also its performance. Moreover, it is becoming increasingly the case that papers designed for a particular use must, as it were incidentally, also perform well in alternative applications. An example is that of office and printing papers, which are expected to perform as well in copier machines as in all the various forms of impact and non-impact printers. But even greater demands are made in other product areas, where board designed for dry foods can also be expected to protect moist and fatty materials and be made of 100% recycled fibre. The need to isolate foodstuffs from some of the contaminants that can affect recycled board is a· serious challenge. Thus, papermakers are constantly striving to meet a broadening spectrum of demands on their products; often while accepting declining quality of raw materials. The product design philosophy that has arisen in response to this is increasingly to isolate the bulk of a paper from its uses: to engineer the needed performance characteristics into the paper surfaces while more or less ignoring what happens inside.

This book constitutes the refereed post-proceedings of the 11th International Conference on Industrial Engineering and Applications, ICIEA 2024, held in Nice, France, during January 10-12, 2024. The 16 full papers and 3 short papers included in this book were carefully reviewed and selected from 90 submissions. They focus on the most recent and relevant research, theories and practices in industrial engineering and its applications.

Selected peer-reviewed full text papers from the 13th International Conference'Innovative Technologies for Joining Advanced Materials'(TIMA22)Selected peer-reviewed full text papers from the 13th International Conference'Innovative Technologies for Joining Advanced Materials'(TIMA22), November 24-25, 2022, Timișoara, Romania

This book reports on innovative research and practices in contemporary design, showing how to integrate different concepts and discussing the emerging role of design in different field, its meaning for humans and citizens, as well as its impact on society and the global ecosystem. Gathering the best papers from Senses & Sensibility, held on December 9-11, 2021 in Bari, Italy, it highlights the role of design in fostering education, physical and social wellbeing, industrial innovation and cultural preservation, as well as inclusivity, sustainability and communication in a world facing complex challenges on a global scale.

This book reports on innovative research and practices in contemporary design, showing how to integrate different concepts and discussing the emerging role of design in different field, its meaning for humans and citizens, at both local and global level. Gathering the best papers from Senses & Sensibility, held in 2019 in Lisbon, Portugal, it highlights the role of design in fostering education, physical and social wellbeing, industrial innovation and cultural preservation, as well as inclusivity, sustainability and communication in a global, digital world.

This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers a wide range of manufacturing processes, such as grinding, boring, milling, turning, woodworking, coatings, including additive manufacturing. It focuses on laser, ultrasonic, and combined laser–ultrasonic hardening treatments, and dispersion hardening. It describes tribology and functional analysis of coatings, separation, purification and filtration processes, as well as ecological recirculation and electrohydraulic activation, highlighting the growing role of digital twins, optimization and lifecycle management methods, and quality inspection processes. It also covers cutting-edge heat and mass transfer technologies and energy management methods. Gathering the best papers presented at the 3rd Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2021), held in Odessa, Ukraine, on September 7–10, 2021, this book offers a timely overview and extensive information on trends and technologies in manufacturing, mechanical, and materials engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and to offer a bridge between academic and industrial researchers.

This book gathers selected contributions in the field of civil and structural engineering, as presented by international researchers and engineers at the International Conference on Materials Physics, Building Structures and Technologies in Construction, Industrial and Production Engineering (MPCPE), held in Vladimir, Russia, on April 22–25, 2024. The book covers a wide range of topics including the theory and design of capital construction facilities, engineering, and hydraulic structures; development of innovative solutions in the field of modeling and testing of reinforced concrete, metal, and wooden structures, as well as composite structures based on them; investigation of complex dynamic effects on construction objects, and many others directions. Intended for professional builders, designers, and researchers. The contributions, which were selected by means of a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations.

This book presents content from the Third International Symposium on the Education in Mechanism and Machine Science (ISEMMS 2022). Among others, the chapters report on mechanical engineering education, mechanism and machine science in the mechanical engineer curricula, methodology, virtual laboratories and new laws. Special attention is given to MMS experiences in Pandemic times. The chapters discuss the current problems in MMS education with the aim of providing solutions and identifying appropriate trends for a modern world common vision in the Engineering education field.

This book gathers the latest advances, innovations, and applications in the field of construction engineering, as presented by researchers and engineers at the II International Conference “Industrial and Civil Construction”, held in Belgorod, Russia, on January 18-19, 2022. It covers highly diverse topics, including industrial and civil construction, theory and advanced technology of engineering structure, concrete technology, durable structures, smart structures and materials, and aggregates and processes in construction. The contributions, which were selected by means of a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations.

This book gathers selected contributions in the field of civil and structural engineering, as presented by international researchers and engineers at the International Conference on Materials Physics, Building Structures and Technologies in Construction, Industrial and Production Engineering (MPCPE), held in Vladimir, Russia, on April 26–28, 2022. The book covers a wide range of topics including the theory and design of capital construction facilities, engineering, and hydraulic structures; development of innovative solutions in the field of modeling and testing of reinforced concrete, metal, and wooden structures, as well as composite structures based on them; investigation of complex dynamic effects on construction objects, and many others directions. Intended for professional builders, designers, and researchers. The contributions, which were selected by means of a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations.

This book gathers selected contributions in the field of civil and structural engineering, as presented by international researchers and engineers at the International Conference on Materials Physics, Building Structures and Technologies in Construction, Industrial and Production Engineering (MPCPE), held in Vladimir, Russia on April 26-28 2021. The book covers a wide range of topics including the theory and design of capital construction facilities, engineering and hydraulic structures; development of innovative solutions in the field of modeling and testing of reinforced concrete, metal and wooden structures, as well as composite structures based on them; investigation of complex dynamic effects on construction objects, and many others directions. Intended for professional builders, designers and researchers. The contributions, which were selected by means of a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations.

Computer Aided Tolerancing (CAT) is an important topic in any field of design and production where parts move relative to one another and/or are assembled together. Geometric variations from specified dimensions and form always occur when parts are manufactured. Improvements in production systems can cause the amounts of the variations to become smaller, but their presence does not disappear. To shorten the time from concept to market of a product, it has been increasingly important to take clearances and the tolerancing of manufacturing variations into consideration right from the beginning, at the stage of design. Hence, geometric models are defined that represent both the complete array of geometric variations possible during manufacture and also the influence of geometry on the function of individual parts and on assemblies of them. The contents of this book originate from a collection of selected papers presented at the 9th CIRP International Seminar on CAT that was held from April 10-12, 2005 at Arizona State University, USA. The CIRP (Collège International pour la Recherche en Production or International Institution for Production Engineering Research) plans this seminar every two years, and the book is one in a series of Proceedings on CAT. The book is organized into seven parts: Models for Tolerance Representation and Specification, Tolerance Analysis, Tolerance Synthesis, Computational Metrology and Verification, Tolerances in Manufacturing, Applications to Machinery, and Incorporating Elasticity in Tolerance Models.

Selected peer-reviewed full text papers from the 1st Africa International Conference on Clean Energy and Energy Storage (AICCEES)Selected peer-reviewed full text papers from the 1st Africa International Conference on Clean Energy and Energy Storage (AICCEES), November 23-24, 2023, Port Harcourt, Nigeria

This volume of Advances in Intelligent and Soft Computing contains accepted papers presented at the SOCO 2024 conference held in the beautiful and historic city of Salamanca (Spain) in October 2024. Soft computing represents a collection or set of computational techniques in machine learning, computer science, and some engineering disciplines that investigate, simulate, and analyze very complex issues and phenomena. After a thorough peer-review process, the 18th SOCO 2023 International Program Committee selected 62 papers for publication in these conference proceedings, representing an acceptance rate of 50%. In this relevant edition, a particular emphasis was put on organizing special sessions. Four special sessions were organized related to relevant topics such as Machine Learning and Computer Vision in Industry 4.0, Intelligent Models and Frameworks for Smart Agriculture and Green Economy, Computational Intelligence Applied to Modelling and Control of Engineering Systems, and Applied Machine Learning (2nd Edition). The selection of papers was extremely rigorous to maintain the high quality of the conference. We want to thank the members of the Program Committees for their hard work during the reviewing process. This is a crucial process for creating a high-standard conference; the SOCO conference would not exist without their help.

The 11th International Conference on Creative Technology (ICCT2023): To Added Value Innovations in Engineering, Materials and Manufacturing was held in Rajamangala University of Technology Krungthep, 2 Nanglinchi Road, Thungmahamek, Sathorn, Bangkok, Thailand, between July 20 and 22, 2023. The conference was organized by three universities from three countries, namely Rajamangala University of Technology Krungthep (RMUTK, Thailand), Vellore Institute of Technology (VIT, India), and Liverpool John Moores University (LJMU, England). The conference aimed to give an opportunity for students, government organizations, private sectors, and universities to exchange experiences in advances in materials and manufacturing, simulation, automation, optimization of production processes, production management, maintenance, simulation, Industry 4.0, AI, and robotics. This book presents a collection of 58 peer-reviewed papers. The organizers received 61 contributions from 12 countries around the world. After a thorough peer-review process, the committee accepted 33 papers for conference proceedings prepared by 142 authors from 11 countries (acceptance rate of around 54%).

This book consists of selected papers presented at the 10th International Conference on Mechanical, Automotive and Materials Engineering (CMAME 2023), held in Da Nang, Vietnam, on 20–22 December 2023. Readers find this book a vehicle for the dissemination of research results on latest advances made in this area. It is expected that the publication of the research papers with the advanced topics listed in this book will further promote high standard academic research in the field and make a significant contribution to the development of human society. Topics that will be covered in this book include but not limited to: materials science and engineering; engine system design and power machinery; mechanical design-manufacture and automation; design and analysis of robot systems; automobile design and manufacturing engineering; thermal and fluid mechanics analysis; aircraft structural design and system control; control theory and engineering applications; electronic information technology. This book is intended for researchers, engineers, and advanced postgraduate students in the fields of automotive, production, industrial engineering and design.

This book presents peer-reviewed full papers of the 50th Textile Research Symposium (TRS50, 2023). The papers cover a range of contemporary and innovative themes in textile science and technology and smart/nanomaterials. The common thread linking these themes is science and technology for the advancement of the UN Sustainable Development Goals (SDGs) which are crucial for the well-being of the planet. The book examines and adds new knowledge to a range of themes like Industry 4.0, green manufacturing, circular textiles, artificial intelligence and smart factories, advanced fibrous materials and composites, recent developments in textile machinery, apparel comfort and next-generation nonwovens. The topics covered include innovative manufacturing methods that factor in people, planet and profit. This book is a valuable reference for students, academia, researchers, policy makers and professionals interested in the re-imagination of the industry that kick-started the industrial revolution.

This book highlights recent findings in industrial, manufacturing and mechanical engineering and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering is discussed, including the machinery and mechanism design, dynamics of machines and working processes, friction, wear and lubrication in machines, design and manufacturing engineering of industrial facilities, transport and technological machines, mechanical treatment of materials, industrial hydraulic systems. This book gathers selected papers presented at the 10th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia, in May 2024. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, this book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.

Selected peer-reviewed full text papers from the 22nd AUTEX World Textile Conference (AUTEX 2023)Selected peer-reviewed full text papers from the 22nd AUTEX World Textile Conference (AUTEX 2023), June 26-28, 2023, Melbourne, Australia)

This book consists of selected papers presented at the 8th International Conference on Mechanical, Automotive and Materials Engineering (CMAME 2022), held in Hanoi, Vietnam, on 16–18 December 2022. Readers find this book a vehicle for the dissemination of research results on latest advances made in this area. It is expected that the publication of the research papers with the advanced topics listed in this book will further promote high standard academic research in the field and make a significant contribution to the development of human society. Topics that will be covered in this book include but not limited to: materials science and engineering; engine system design and power machinery; mechanical design-manufacture and automation; design and analysis of robot systems; automobile design and manufacturing engineering; thermal and fluid mechanics analysis; aircraft structural design and system control; control theory and engineering applications; electronic information technology. This book is intended for researchers, engineers and advanced postgraduate students in the fields of automotive, production, industrial engineering and design.

This book highlights recent findings in industrial, manufacturing and mechanical engineering and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering is discussed, including the machinery and mechanism design, dynamics of machines and working processes, friction, wear and lubrication in machines, design and manufacturing engineering of industrial facilities, transport and technological machines, mechanical treatment of materials, industrial hydraulic systems. This book gathers selected papers presented at the 9th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia, in May 2023. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, this book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.

This book draws together the most interesting recent results to emerge in mechanical engineering in Russia, providing a fascinating overview of the state of the art in the field in that country which will be of interest to a wide readership. A broad range of topics and issues in modern engineering is discussed, including dynamics of machines, materials engineering, structural strength and tribological behavior, transport technologies, machinery quality and innovations. The book comprises selected papers presented at the 11th conference “Modern Engineering: Science and Education”, held at the Saint Petersburg State Polytechnic University in June 2022 with the support of the Russian Engineering Union. The authors are experts in various fields of engineering, and all of the papers have been carefully reviewed. The book is of interest to mechanical engineers, lecturers in engineering disciplines and engineering graduates.

This book draws together the most interesting recent results to emerge in mechanical engineering in Russia, providing a fascinating overview of the state of the art in the field in that country which will be of interest to a wide readership. A broad range of topics and issues in modern engineering is discussed, including dynamics of machines, materials engineering, structural strength and tribological behavior, transport technologies, machinery quality and innovations, robotics and aircraft dynamics. The book comprises selected papers presented at the 12th conference “Modern Mechanical Engineering: Science and Education”, held at the Saint Petersburg State Polytechnic University in June 2023 with the support of the Russian Engineering Union. The authors are experts in various fields of engineering, and all of the papers have been carefully reviewed. The book is of interest to mechanical engineers, lecturers in engineering disciplines and engineering graduates.

This book presents the proceedings of the conference and provides valuable insights into the issues facing Small and Medium Enterprises (SMEs), particularly in the areas of sustainable operations and digitalization. It comprises a series of papers presented at the conference, covering topics such as: challenges faced by SMEs in a post-pandemic era; digitalization and its impact on SMEs; sustainable operations in SMEs; international market performance improvement in SMEs; SMEs infrastructure and integration with research, development, and innovation institutions; and SMEs participation in business networks. The papers offer a unique perspective on the challenges and opportunities facing SMEs and provides practical solutions for those looking to help their organizations thrive in a rapidly changing business environment.

This proceedings book contains papers presented at the International Symposium on Lightweight and Sustainable Polymeric Materials (LSPM23) held on February 17, 2023, and organized by King Mongkut's University of Technology North Bangkok, Thailand. The papers in this book are presented by academics and industrial practitioners showcasing the latest technological advancements and applications of environmentally friendly polymeric materials with the emphasis on the production of lightweight, low-cost, low-energy-consuming materials with competitive performance. The content of this book appeals to academia and industrial researchers from the fields of polymer chemistry, physics, and materials science.

This book comprises state-of-the-art papers in manufacturing engineering & processes including computer-aided design and manufacturing, environmentally sustainable manufacturing processes, modelling, analysis, and simulation of manufacturing processes, composite materials manufacturing, nanomaterials and nano-manufacturing, semiconductor materials manufacturing, rapid manufacturing technologies, 3D printing and non-traditional manufacturing engineering and processes. In particular, the papers in the book cover latest advances especially in 3D printing and additive manufacturing techniques and processes for sustainable materials including ceramic and polymer-matrix composite where there is paucity of good papers in the literature. The contents of this volume will be useful to researchers and practicing engineers alike.

This book of Advances in Intelligent and Soft Computing contains accepted papers presented at SOCO 2023 conference held in the beautiful and historic city of Salamanca (Spain) in September 2023.Soft computing represents a collection or set of computational techniques in machine learning, computer science, and some engineering disciplines, which investigate, simulate, and analyze very complex issues and phenomena.After a through peer-review process, the 18th SOCO 2023 International Program Committee selected 61 papers which are published in these conference proceedings and represents an acceptance rate of 60%. In this relevant edition, a particular emphasis was put on the organization of special sessions. Seven special sessions were organized related to relevant topics such as: Time Series Forecasting in Industrial and Environmental Applications, Technological Foundations and Advanced Applications of Drone Systems, Soft Computing Methods in Manufacturing and ManagementSystems, Efficiency and Explainability in Machine Learning and Soft Computing, Machine Learning and Computer Vision in Industry 4.0, Genetic and Evolutionary Computation in Real World and Industry, and Soft Computing and Hard Computing for a Data Science Process Model. The selection of papers was extremely rigorous to maintain the high quality of the conference. We want to thank the members of the Program Committees for their hard work during the reviewing process. This is a crucial process for creating a high-standard conference; the SOCO conference would not exist without their help.

This book of Advances in Intelligent and Soft Computing contains accepted papers presented at SOCO 2023 conference held in the beautiful and historic city of Salamanca (Spain) in September 2023. Soft computing represents a collection or set of computational techniques in machine learning, computer science, and some engineering disciplines, which investigate, simulate, and analyze very complex issues and phenomena. After a through peer-review process, the 18th SOCO 2023 International Program Committee selected 61 papers which are published in these conference proceedings and represents an acceptance rate of 60%. In this relevant edition, a particular emphasis was put on the organization of special sessions. Seven special sessions were organized related to relevant topics such as: Time Series Forecasting in Industrial and Environmental Applications, Technological Foundations and Advanced Applications of Drone Systems, Soft Computing Methods in Manufacturing and Management Systems, Efficiency and Explainability in Machine Learning and Soft Computing, Machine Learning and Computer Vision in Industry 4.0, Genetic and Evolutionary Computation in Real World and Industry, and Soft Computing and Hard Computing for a Data Science Process Model. The selection of papers was extremely rigorous to maintain the high quality of the conference. We want to thank the members of the Program Committees for their hard work during the reviewing process. This is a crucial process for creating a high-standard conference; the SOCO conference would not exist without their help.

This book contains selected papers presented at the second international Conference on Progress in Digital and Physical Manufacturing (ProDPM'21), organized by the School of Technology and Management (ESTG) of the Polytechnic Institute of Leiria (IPL), from the 27th to 29th of October 2021. It represents a significant contribution to the current advances in digital and physical manufacturing issues as it contains topical research in this field. The book is an essential reading for all of those working on digital and physical manufacturing, promoting better links between the academia and the industry. The conference papers cover a wide range of important topics like biomanufacturing, advanced rapid prototyping technologies, rapid tooling and manufacturing, micro-fabrication, 3D CAD and data acquisition, and collaborative design.

“IAS has been held every two years since 1986 providing venue for the latest accomplishments and innovations in advanced intelligent autonomous systems. New technologies and application domains continuously pose new challenges to be overcome in order to apply intelligent autonomous systems in a reliable and user-independent way in areas ranging from industrial applications to professional service and household domains. The present book contains the papers presented at the 17th International Conference on Intelligent Autonomous Systems (IAS-17), which was held from June 13–16, 2022, in Zagreb, Croatia. In our view, 62 papers, authored by 196 authors from 19 countries, are a testimony to the appeal of the conference considering travel restrictions imposed by the COVID-19 pandemic. Our special thanks go to the authors and the reviewers for their effort—the results of their joint work are visible in this book. We look forward to seeing you at IAS-18 in 2023 in Suwon, South Korea!”

This book (The AUN/SEED-Net Joint Regional Conference in Transportation, Energy, and Mechanical Manufacturing Engineering) gathers selected papers submitted to the 14th Regional Conference in Energy Engineering and the 13th Regional Conference in Mechanical Manufacturing Engineering in the fields related to intelligent equipment, automotive engineering, mechanical systems and sustainable manufacturing, renewable energy, heat and mass transfer. Under the theme of “Integration and Innovation for Sustainable Development,” This book consists of papers in the aforementioned fields presented by researchers and scientists from universities, research institutes, and industry showcasing their latest findings and discussions with an emphasis on innovations and developments in embracing the new norm, resulting from the COVID-19 pandemic.

This book aims to provide new research methods, theories and applications from various areas of industrial economics and engineering. In detail, the included scientific papers analyse and describe communication processes in the fields of industrial economics, industrial system, industrial security and engineering and other related areas. The variety of the papers delivers added value for both scholars and practitioners. This book is the documentation of the IEIS 2021 conference. The book covers a great deal of research achievements in industrial restructuring strategy, industrial organization, industrial policy, departmental economic research, industrial competitiveness, regional industrial structure, national industrial economic security theory and empirical research, and it emphasizes on combining theory with practice. The book aims to discuss the issues in industrial economics and industrial security theories and practices. It is the documentation of IEIS 2021 conference, which took place at Shandong University. Due to the impact of COVID-19, it took place online as a virtual conference.

This book contains papers presented in the 7th International Conference on Production, Energy and Reliability (ICPER 2020) under the banner of World Engineering, Science & Technology Congress (ESTCON2020) held from 14th to 16th July 2020 at Borneo Convention Centre, Kuching, Malaysia. The conference contains papers presented by academics and industrial practitioners showcasing their latest advancements and findings in mechanical engineering areas with an emphasis on sustainability and the Industrial Revolution 4.0. The papers are categorized under the following tracks and topics of research:IoT, Reliability and SimulationAdvanced Materials, Corrosion and Autonomous ProductionEfficient Energy Systems and ThermofluidsProduction, Manufacturing and Automotive

This volume comprises papers from the 18th Conference on Systems Engineering Research (CSER). The theme of this volume, “Recent Trends and Advances in Model-Based Systems Engineering,” reflects the fact that systems engineering is undergoing a transformation motivated by mission and system complexity and enabled by technological advances such as model-based systems engineering, digital engineering, and the convergence of systems engineering with other disciplines. This conference is focused on exploring recent trends and advances in model-based systems engineering (MBSE) and the synergy of MBSE with simulation technology and digital engineering. Contributors have submitted papers on MBSE methods, modeling approaches, integration of digital engineering with MBSE, standards, modeling languages, ontologies and metamodels, and economics analysis of MBSE to respond to the challenges posed by 21st century systems. What distinguishes this volume are the latest advances in MBSE research, the convergence of MBSE with digital engineering, and recent advances in applied research in MBSE, including growing convergence with systems science and decision science. This volume is appropriate as a reference text in graduate engineering courses in Model-Based Systems Engineering.

This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering is discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 7th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia, in May 2021. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.

This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering is discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 7th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia, in May 2021. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.

This book contains a collection of peer-reviewed papers from the 2020 Conference on Multidisciplinary Engineering and Technology (COMET 2020) held online on December 15–16, 2020. It contains twenty-five papers covering energy harvester, thermodynamics, vibration, dynamic of mechanics, manufacturing process, computer-aided manufacturing (CAM), CFD analysis, electronics, and microcontroller.

This book highlights recent findings in industrial, manufacturing and mechanical engineering and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering is discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. This book gathers selected papers presented at the 8th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia, in May 2022. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, this book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.

This book of Advances in Intelligent and Soft Computing contains accepted papers presented at SOCO 2021 conference held in the beautiful and historic city of Bilbao (Spain), in September 2021.Soft computing represents a collection or set of computational techniques in machine learning, computer science, and some engineering disciplines, which investigate, simulate, and analyze very complex issues and phenomena.After a through peer-review process, the 16th SOCO 2021 International Program Committee selected 78 papers which are published in these conference proceedings and represents an acceptance rate of 48%. In this relevant edition, a special emphasis is put on the organization of special sessions. Seven special sessions are organized related to relevant topics as follows: applications of machine learning in computer vision; soft computing applied to autonomous robots and renewable energy systems; optimization, modeling, and control by soft computing techniques (OMCS); challenges and new approaches toward artificial intelligence deployments in real-world scenarios; time series forecasting in industrial and environmental applications (TSF); soft computing methods in manufacturing and management systems and applied machine learning.The selection of papers was extremely rigorous in order to maintain the high quality of the conference, and we would like to thank the members of the program committees for their hard work in the reviewing process. This is a crucial process to the creation of a high standard conference, and the SOCO conference would not exist without their help.

This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 6th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia in May 2020. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineeringdisciplines, and engineering graduates.

This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 6th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia in May 2020. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineeringdisciplines, and engineering graduates.

This book draws together the most interesting recent results to emerge in mechanical engineering in Russia, providing a fascinating overview of the state of the art in the field in that country which will be of interest to a wide readership. A broad range of topics and issues in modern engineering is discussed, including dynamics of machines, materials engineering, structural strength and tribological behavior, transport technologies, machinery quality and innovations. The book comprises selected papers presented at the 10th conference'Modern Engineering: Science and Education', held at the Saint Petersburg State Polytechnic University in June 2021 with the support of the Russian Engineering Union. The authors are experts in various fields of engineering, and all of the papers have been carefully reviewed. The book will be of interest to mechanical engineers, lecturers in engineering disciplines and engineering graduates.

This edited book presents scientific results of the International Semi-Virtual Workshop on Data Science and Digital Transformation in the Fourth Industrial Revolution (DSDT 2020) which was held on October 15, 2020, at Soongsil University, Seoul, Korea. The aim of this workshop was to bring together researchers and scientists, businessmen and entrepreneurs, teachers, engineers, computer users, and students to discuss the numerous fields of computer science and to share their experiences and exchange new ideas and information in a meaningful way. Research results about all aspects (theory, applications and tools) of computer and information science, and to discuss the practical challenges encountered along the way and the solutions adopted to solve them. The workshop organizers selected the best papers from those papers accepted for presentation at the workshop. The papers were chosen based on review scores submitted by members of the program committee and underwent furtherrigorous rounds of review. From this second round of review, 17 of the conference's most promising papers are then published in this Springer (SCI) book and not the conference proceedings. We impatiently await the important contributions that we know these authors will bring to the field of computer and information science.

This book includes selected peer-reviewed papers presented at third International Conference on Computational and Experimental Methods in Mechanical Engineering held in June 2021 at G.L. Bajaj Institute of Technology and Management, Greater Noida, U.P, India. The book covers broad range of topics in latest research including hydropower, heat transfer, fluid mechanics, advanced manufacturing, recycling and waste disposal, solar energy, thermal power plants, refrigeration and air conditioning, robotics, automation and mechatronics, and advanced designs. The authors are experienced and experts in their field, and all papers are reviewed by expert reviewers in respective field. The book is useful for industry peoples, faculties, and research scholars.

This book presents the state-of-the-art research in the field of transdisciplinary design, and highlights the challenges and issues from the perspectives of processes, people and products in transdisciplinary product design and development. It collates research papers resulting from the ‘Workshop on the Future of Transdisciplinary Design'written by leading researchers in engineering design and product development. The papers provide examples and case studies from existing practices, as well as future perspectives towards the development of the complex and ever-changing domains of engineering design and product development, with an emphasis on transdisciplinarity. ‘The Future of Transdisciplinary Design'contains a selection of research papers in the following areas related to transdisciplinary design: -Approaches-Tools and methods-Management and collaboration-Distributed and culturally diverse teams-Modeling, representing and managing information-Education and training A transdisciplinary design process is a design process involving the integrated use of knowledge, methods and tools from various disciplines. Design of product/services increasingly requires cross-disciplinary collaboration, and integration of specialized knowledge from different disciplines is necessary to tackle complex and large scale design problems. This book provides a valuable reference to researchers, professionals and PhD students in the field of engineering design and product development. Design practitioners and those involved in product development in the manufacturing industry will equally benefit from the research presented as well as future advances in this research.

This book comprises select papers from the 10th International Conference on Manufacturing Engineering and Processes 2021. The contents of this volume focus on recent technological advances in the field of manufacturing engineering and processes including computer-aided design and manufacturing, environmentally sustainable manufacturing processes, composite materials manufacturing, and nanomaterials and nanomanufacturing. The contents cover latest advances especially in 3D printing and additive manufacturing techniques and processes for sustainable materials including ceramic and polymer-matrix composite where there is paucity of good papers in the literature. This book proves a valuable resource for those in academia and industry.

This book includes a selection of peer-reviewed papers presented at the 10th China Academic Conference on Printing and Packaging, which was held in Xi'an, China, on November 14–17, 2019. The conference was jointly organized by the China Academy of Printing Technology, Beijing Institute of Graphic Communication, and Shaanxi University of Science and Technology. With 9 keynote talks and 118 papers on graphic communication and packaging technologies, the conference attracted more than 300 scientists.The proceedings cover the latest findings in a broad range of areas, including color science and technology, image processing technology, digital media technology, mechanical and electronic engineering, Information Engineering and Artificial Intelligence Technology, materials and detection, digital process management technology in printing and packaging, and other technologies. As such, the book appeals to university researchers, R&D engineers and graduate students in the graphic arts, packaging, color science, image science, material science, computer science, digital media, and network technology.

This book contains accepted papers presented at SOCO 2020 conference held in the beautiful and historic city of Burgos (Spain), in September 2020.Soft computing represents a collection or set of computational techniques in machine learning, computer science and some engineering disciplines, which investigate, simulate, and analyze very complex issues and phenomena. After a through peer-review process, the SOCO 2020 International Program Committee selected 83 papers which are published in these conference proceedings and represents an acceptance rate of 35%. Due to the COVID-19 outbreak, the SOCO 2020 edition was blended, combining on-site and on-line participation. In this relevant edition a special emphasis was put on the organization of special sessions. Eleven special session were organized related to relevant topics such as: Soft Computing Applications in Precision Agriculture, Manufacturing and Management Systems, Management of Industrial and Environmental Enterprises, Logistics and Transportation Systems, Robotics and Autonomous Vehicles, Computer Vision, Laser-Based Sensing and Measurement and other topics such as Forecasting Industrial Time Series, IoT, Big Data and Cyber Physical Systems, Non-linear Dynamical Systems and Fluid Dynamics, Modeling and Control systems The selection of papers was extremely rigorous in order to maintain the high quality of SOCO conference editions and we would like to thank the members of the Program Committees for their hard work in the reviewing process. This is a crucial process to the creation of a high standard conference and the SOCO conference would not exist without their help.