Search

Basic Theory of Structures provides a sound foundation of structural theory. This book presents the fundamental concepts of structural behavior. Organized into 12 chapters, this book begins with an overview of the essential requirement of any structure to resist a variety of loadings without changing its shape. This text then examines the application of the laws of statics to structures as a means of determining the external reactions induced at supports due to loading. Other chapters consider the dependence of stress components on the choice of reference plane. This book discusses as well the method of determining the internal forces in the bars of a truss, which depends upon applying the conditions of equilibrium. The final chapter deals with the variety of factors affecting the strength of concrete. This book is intended to be suitable for civil engineering students. Design and civil engineers will also find this book extremely useful.

Applied Mechanics for Engineers, Volume 1 provides an introduction to mechanics applied to engineering. The worked examples correspond to the first year of the Ordinary National Certificate in Engineering, which are supported with theories discussed in this book. The calculations in this text have all been made with the assistance of a slide rule and it is recommended that the reader acquire a slide rule to make full use of this publication. The topics covered include forces and moments; beams, shear force, and bending moment diagrams; velocity and acceleration; friction; and work, power, and energy. The gas laws; vapors, steam-engine, and boiler; and internal combustion engines are also deliberated in this text. This volume is valuable to engineering students, as well as researchers conducting work on applied mechanics.

Introduction to Applied Thermodynamics is an introductory text on applied thermodynamics and covers topics ranging from energy and temperature to reversibility and entropy, the first and second laws of thermodynamics, and the properties of ideal gases. Standard air cycles and the thermodynamic properties of pure substances are also discussed, together with gas compressors, combustion, and psychrometry. This volume is comprised of 16 chapters and begins with an overview of the concept of energy as well as the macroscopic and molecular approaches to thermodynamics. The following chapters focus on temperature, entropy, and standard air cycles, along with gas compressors, combustion, psychrometry, and the thermodynamic properties of pure substances. Steam and steam engines, internal combustion engines, and refrigeration are also considered. The final chapter is devoted to heat transfer by conduction, radiation, and convection. The transfer of heat energy between fluids flowing through concentric pipes is described. This book will appeal to mechanical engineers and students as well as those interested in applied thermodynamics.

General Engineering Science in SI Units, Volume 2 focuses on engineering science. The volume first offers information on concurrent forces, including calculation of the resultant of two mutually perpendicular forces; equilibrium of a system of coplanar, concurrent forces; resolution and notation of forces; and equilibrium on a smooth inclined plane. The text then discusses velocity and acceleration. Topics include average velocity during uniformly accelerated motion; compounding and resolution of velocities; relative and angular velocities; and the relation of angular and linear velocities. The book takes a look at force and motion, power and energy, and strength of materials, including Newton's laws of motion, mass and inertia, power, efficiency, torque, elasticity, and ultimate strength. The volume also touches on heat and electricity. Topics include coefficient of cubical expansion of solids and liquids; maximum density of water; electromotive force and potential difference; and effect of temperature change on resistance. Electromagnetism and electronic induction are also discussed. The text is a primary reference for readers interested in engineering science.

Photoelasticity for Designers covers the fundamental principles and techniques of photoelasticity, with an emphasis on its value as an aid to engineering design. This book is divided into 12 chapters, and begins with an introduction to the essential optical effects necessary for an understanding of the photoelastic phenomena. The next chapters describe the concept and features of polariscopes; the characterization of photoelastic materials; the formulation and testing of two-dimensional models of photoelasticity; and the application of model stresses to prototypes for the analysis of stresses occurring in the plane of the model, effectively of uniform thickness. These topics are followed by a discussion of the frozen stress technique and a comparison of the various materials that can be used for models in the technique. The ending chapters deal with the principles and application of the birefringent coating and distorted model techniques. This book will prove useful to photoelasticians, design engineers, and students.

The Stress Analysis of Pressure Vessels and Pressure Vessel Components, Volume 3 deals with the basic principles and concepts underlying stress analysis of pressure vessels and related components used in the nuclear energy industry. Among the components subjected to stress analysis are pressure vessel branches, pressure vessel ends, local attachments, and flanges. Smooth and mitered pipe bends, externally pressurized vessels, and creep effects in structures are also analyzed. This book is comprised of 11 chapters that explore the main problems of structural analysis related to the design of metal pressure vessels and components. After introducing the reader to the basic principles of stress analysis, it turns to nozzles in pressure vessels. The shakedown analysis of radial nozzles in spheres is described for pressure, thrust, moment, shear, and combined loading. The problem of pressure vessel ends is treated next, along with local loads applied to pressure vessel shells at nozzles and local attachments such as support points. An analysis of pressure vessels using a computer is also presented. The final chapter describes the analysis of ligament stresses in pressure vessels and includes a discussion on arrays of holes with reinforcement. This volume will be of value to nuclear and structural engineers as well as designers and research workers in the nuclear industry.

Engineering Drawing: From the Beginning, Volume 1 discusses the basic concepts in engineering drawing. The book illustrates the drawings presented in both first angle (English) projection and third angle (American) projection. The opening chapter discusses the equipment utilized in engineering drawing, and then proceeds to discussing the concepts and methods in engineering drawing. The coverage of the text includes geometrical constructions, projection, and dimensioning. The book will be of great interest to anyone who wants to get acquainted with the basics of engineering drawing.

Engineering Drawing from the Beginning, Volume 2 discusses the methods for communicating technical engineering concepts through illustrations and drawings. This volume covers the more advance techniques in engineering drawing. The coverage of the text includes the helix, which is the path traced by a point moving uniformly around the surface of a right cylinder that is moving axially. The book also covers drawings of solid objects such as prisms, pyramids, and cones, along with hollow objects made from sheet material. In Chapter 5, the text presents the conventional representations of common features. The sixth chapter deals with all forms of fastenings, while the seventh chapter talks about metrication in the drawing office. The last chapter details the working drawings of assemblies and parts taken from those assemblies. The text will be most useful to students and professional engineers, as both learning material and reference source.

Stress Analysis Problems in S.I. Units covers topics usually dealt with in HNC and HND strength of materials subjects, in CEI Part I, in the London degree subject properties of materials and stress analysis. Problems are rewritten in S.I. units, with numerical values being rounded to achieve rational metric sizes. This book is organized into 10 chapters covering various aspects involved in stress analysis. These include statics; stress and strain; two-dimensional stress systems; stresses in beams; torsion; and beam deflections. Strain energy methods, elementary plastic stress analysis, and analysis of stress in engineering components are also explained. A list of the base and derived units used in this book is given as well. This book will be very useful to students studying for CNAA degrees.

Mathematics for the General Course in Engineering covers the syllabus in mathematics for the general course in engineering. Topics covered deal with arithmetic, logarithms, and mensuration, along with algebra, geometry, and trigonometry. Examples and the corresponding answers are given at the end of each chapter. This volume is comprised of six chapters and begins with an introduction to arithmetic, with emphasis on how to compute fractions, decimals, averages, ratio, percentages, reciprocals, squares and square roots, and errors. The next chapter deals with logarithms and considers positive and negative numbers, the use of brackets, and indices as well as the laws of logarithms and the use of logarithms in calculations. Subsequent chapters focus on mensuration (right prism, oblique prism, sphere, average-area rule, etc.); algebra (signs, maxima and minima, graphical solution of equations, etc.), geometry (angles, intersecting chords, radians, etc.), and trigonometry (special angles, identities, sine rule, cosine rule, etc.). This book will be a useful resource for students of mathematics and engineering.

Strength of Materials: A Course for Students deals with theories of stress analysis. The book describes simple stress, strain, and strain energy and defines, with appropriate formulas, commonly used terms such as load, elasticity, tensile test, and temperature stresses. The text then analyzes the moment when an applied force bends a subject beam under different load conditions. The formula for the first and second moments of area and the formula for the first and second moments of mass are explained. The book also describes the unstrained or neutral plane when a bending moment acting on a particular beam results in tensile and compressive strains. The author also explains bending with direct stress, torsion, and the types of complex stresses. The theories of elastic failure are then discussed: the Maximum Principal Stress Theory (Rankine) for brittle materials, as well as the Maximum Shear Stress Theory (Coulomb, Tresca, and Guest) and the Maximum Strain Energy Theory (Haigh), which both concern ductile materials. The text also addresses the stress that can occur in both thick and thin cylinders, and then shows the appropriate computations to determine the downward forces as well as Lame's Formulas, which are used to find the radial and hoop stresses acting on the cylinder. This textbook is useful for students of civil, structural, and mechanical engineering. Designers and technicians of industrial machinery will also greatly profit from reading this book.

Automation and Control in Transport reviews the significant advances in transport automation and control. All the present and future foreseeable modes of transport, particularly railways, are treated mathematically. Topics range from dynamic systems to route capacity, vehicle spacing, traffic congestion and regulation, and traffic surveillance and control. Vehicle detection and identification, sorting and marshalling, control of acceleration and power, steering, and control of braking are also given consideration. This volume consists of 16 chapters and begins with a discussion of the dynamic behavior of a system (that is, how it responds to changing situations) from the point of view of control engineering. Open-loop systems, closed-loop systems, and the use of a phase-plane diagram to represent the response of a control system are described. The chapters that follow focus on the capacity of a transport system based on the laws for vehicle following, signaling as a means of controlling vehicle spacing in railways, and traffic regulation to address problems of congestion. The reader is also introduced to the use of computers to aid in traffic surveillance and control, means for detecting and identifying the presence of a vehicle, and communication of control signals to moving vehicles. The book concludes by assessing future prospects for transport automation and control. This book will be of interest to traffic engineers as well as students and practitioners of mechanical engineering.

Thermal Stress Analyses deals with both elastic and plastic thermal stresses produced from large variations in temperature and thermal expansion in materials whose properties are time-independent. This book is composed of eight chapters. The opening chapter illustrates the general three-dimensional thermoelastic problem, which requires the determination of stress, strains and displacements, when the body forces and boundary conditions are known while the next chapter demonstrate a simpler, two-dimensional formulation involving plane strain and plane stress. The succeeding five chapters describe thermal stresses in various structures, including in thin plates, beams, circular cylinders, and shells. The closing chapters consider the mechanism of thermal buckling and sundry design problems. This book is of value to mechanical engineers, and to mechanical engineering teachers and students.

Electronic Digital Computers: Their Use in Science and Engineering describes the principles underlying computer design and operation. This book describes the various applications of computers, the stages involved in using them, and their limitations. The machine is composed of the hardware which is run by a program. This text describes the use of magnetic drum for storage of data and some computing. The functions and components of the computer include automatic control, memory, input of instructions by using punched cards, and output from resulting information. Computers operate by using numbers represented by the binary system of 0 and 1. Earlier machines used numbers on wheels which were rotated to different positions, perforations in paper, or blackened spots on films. The computer can handle large numbers only to many numerical places: it does this by rounding off numbers'on the right,'or by avoidance of numbers greater than the machine can handle'on the left.'The book also addresses machine installation, management, and personnel requirements for trouble-free computing. Computer programmers, engineers, designers of industrial processes, and researchers involved in electrical, computer, or mechanical engineering will find this book informative.

Dynamic Plasticity discusses the problems encountered in the theory of dynamic deformation of plastic bodies. The book describes one-dimensional problems involving a single component of stress, particle velocity, and single spatial coordinate. The propagation of longitudinal elastic-plastic waves in thin rods or wires is a simple example of this problem of dynamic plasticity. Another one-dimensional problem, which has various possible transverse motions, is the dynamics of extensible strings. This problem is associated in calculations dealing with cables of suspension bridges, of elevator cables, of electric cables. The analogy with the mechanics of extensible strings can be extended to circular and rectangular membranes such as explained by Karunes and Onat. Karunes and Onat analyzed the propagation of transverse and longitudinal shock waves in such membranes using the Rakhmatulin theory for strings. The text also discusses axi-symmetrical problems and the problems of soil mechanics when applied to soft soils. The book can prove valuable to civil engineers, structural engineers, physicist, and students of mechanical engineering or industrial design.

Elementary Mechanics of Solids presents the three fundamental principles, namely, equilibrium of forces, stress-strain relationship, and geometry and compatibility of deformations. This book discusses the concept of simplifying assumptions about behavior to obtain the simpler engineering solutions. Organized into seven chapters, this book begins with an overview of the theory of elasticity. This text then presents a detailed discussion of biaxial stress and strain systems as well as the generalized stress-strain relationships. Other chapters consider the determination of deflections of straight and curved beams due to shearing and bending action. This book discusses as well the elastic torsion of various thin-walled closed and open sections as well as the shaft of solid circular cross section. The final chapter discusses some cases in which the combined effects of torsion and bending occur. This book is a valuable resource for students who wish to obtain a university degree in engineering, diploma of technology, or higher national certificate.

Newnes Engineer's Pocket Book is a collection of different tidbits of information in engineering delivered in a concise and accessible manner. This pocketbook contains many tables, charts, figures, diagrams, equations, and short statements on the different important areas of engineering. Coverage includes basic information such as the mathematical signs and symbols and the Greek alphabet; the SI units, their multiples and definitions, and their equivalent in Imperial units and Metric conversion factors; temperature and heat; weight and mass; stress; energy and horsepower; time; velocity; and electrical concepts. The book also covers machine-tool adapatations for metrication for threads, nuts, screws, bars, and gears. The text is a handy and useful reference book that will be of great aid for students and professionals in the field of engineering.

The Stability of Elastic Systems presents some of the most important aspects of the stability and the non-linear behavior at finite deformations of several types of structural elastic systems, which are important for a more precise understanding of the static performance of such systems. This book is divided into eight chapters that aim to complete parts of classical, eigenvalue, theories of buckling and to demonstrate the important role played by finite deformations in the theoretical analyses of stability. Other chapters discuss the properties of prismatic members and the post-buckling behavior of plane frameworks. A chapter describes the elastic buckling and stability of statically determinate space frameworks. The remaining chapters cover the elastic buckling of statically indeterminate pin-jointed systems and space frameworks. These chapters also examine the non-conservative aspects of structural systems. This book will be of great value to practicing engineers and students.

Rare Metal Extraction by Chemical Engineering Techniques describes the use of chemical engineering techniques in the extraction and purification of rare metals such as uranium, thorium, and zirconium as well as hafnium, titanium, beryllium, and vanadium. The various chemical extraction stages from ore to metal are discussed. Comprised of nine chapters, this book begins with an examination of ore breakdown processes including dilute acid leaching and the breakdown of concentrated acids, alkalis, and fluorides as well as chlorination. The reader is then introduced to ion-exchange purification; solvent extraction; and dryway conversion processes. Subsequent chapters focus on metal production by high-temperature reduction techniques; molten salt electrolytic processes; and iodide decomposition processes. The final chapter includes a selection of complete flowsheets for the extraction and purification rare metals from ores. This monograph will be of value to metallurgists, chemical engineers, chemists, and others who are interested in the extraction of rare metals.

Propulsion Re-Entry Physics deals with the physics of propulsion re-entry and covers topics ranging from inductive magnetoplasmadynamic (MPD) propulsion systems to launch systems and orbiting maneuvering systems. Problems of re-entry aerodynamics are considered, along with interaction problems in hypersonic fluid dynamics. Comprised of 31 chapters, this volume begins with a detailed account of the quasi-steady adiabatic vaporization and subsequent exothermic decomposition of a pure monopropellant spherical droplet in the absence of free and forced convection. The discussion then turns to results of calculations on MPD machines working in the intermittent and in the continuous mode; inductive plasma accelerators with electromagnetic standing waves; and spherical rocket motors for space and upper stage propulsion. Subsequent chapters focus on pulsed plasma satellite control systems; drag and stability of various Mars entry configurations; hypersonic laminar boundary layers around slender bodies; and effects of an entry probe gas envelope on experiments concerning planetary atmospheres. This book will appeal to students, practitioners, and research workers interested in propulsion re-entry and the accompanying physics.

Aerospace Instrumentation, Volume 4 is a collection of papers presented at the Fourth International Aerospace Instrumentation Symposium, held at the College of Aeronautics, Cranfield. Co-sponsored by the Instrument Society of America, the symposium covers most aspects of aerospace instrumentation. This book is composed of 14 chapters and begins with a description of strain gauge transducers, an introduction to noise, filtering, and random function, as well as the data analysis facility designed to satisfy the needs in the fields of fundamental research and major power plant design and commissioning. A chapter examines equipment for the analysis of random processes for low frequence purposes. Other chapters explore the measurement and analysis of rotor blade airloads, the application of digital computer to instrumentation systems, the features of an altitude test facility, and the trade-offs existing between analogue and digital filtering techniques. The last chapters are devoted to test methods for aircraft performance, stability, and control characteristics determination in non-steady flight. These chapters also treat the operational experience of the B-70 flight test data system. This book will prove useful to aerospace scientists, engineers and research workers.

Plastics in Building Structures covers the proceedings of a conference, held in London on June 14-16, 1965. This conference focuses on the applications of plastics materials in structures. This book emerged from 39 papers presented at the conference. The introductory papers describe the properties of plastics in relation to building structures, and the economic aspects, fire regulations, and flammability of these materials. Considerable papers are devoted to various areas of application of plastics, including adhesives, polymer cements, cored chipboard units, and glued timber. These topics are followed by discussions on the characterization, design, and structural and physical properties of plastics. The final chapters review the commercial development and applications of plastic materials. This book will prove useful to engineers, designer, manufacturers, and researchers in the allied fields.

Elements of Elasticity details the fundamental concepts in the theory of elasticity. The title emphasizes discussing the essential formulas, along with elementary matters. The text first covers stress and strain, and then proceeds to tackling the elasticity equation. Next, the selection covers plane stress and strain, along with curvilinear coordinates and polar coordinates. The next chapter deals with rotating discs and thick cylinders. Chapter 8 details strain energy in plates, while Chapter 9 discusses torsion. The last chapter covers stress propagation. The book will be of great interest to engineers, particularly those who deal with fracture mechanics.

Nonlinear System Analysis focuses on the study of systems whose behavior is governed by nonlinear differential equations. This book is composed of nine chapters that cover some problems that play a major role in engineering and physics. The opening chapter briefly introduces the difference between linear and nonlinear systems. Considerable chapters are devoted to engineering and physics related problems and their applications to particle accelerators, frequency measurements, and masers. Included in these chapters are important practical problems, such as synchronization, stability of systems with periodic coefficients, and effect of random disturbances. The remaining chapters examine random fluctuations of the motion and self-oscillators. This book is intended primarily for engineers and physicists.

Progress in Aeronautical Sciences, Volume 8 is a collection of papers that covers the widening field of aeronautical sciences. The first article deals with problems in fluid mechanics and practical aerodynamics. This paper includes reducing problems to integral equations; the comparison of calculated results with exact analytic solutions; and with experimental pressure distributions using various configurations. The book follows this discussion with a review of the methods for designing swept-winged aircraft, including the design of a symmetrical-fuselage combination at zero incidence. The text also reviews the propulsion characteristics of a hypothetical aircraft flying at hypersonic speeds, and then focuses on air-breathing engines to power hypersonic aircrafts of which the scramjet is the most promising. The publication renders a comprehensive report on the viscous flow in boundary layers in ducts under rarefied conditions. The book then reviews investigations made on the viscous flow through tubes, both in continuum flow and in free-molecule flow. Another paper develops the fundamental mathematical and physical bases of magnetohydrodynamic flow through ducts in the presence of an applied electromagnetic field. Such review is useful when applied to electromagnetic flowmeters, pumps, or generators. The volume can be helpful for aerodynamic researchers, aviation technologists and designers, and aeronautical engineers.

High Speed Pulse Technology: Volume II: Optical Pulses - Lasers - Measuring Techniques focuses on the theoretical and engineering problems that result from the capacitor discharge technique. This book is organized into three main topics: light flash production from a capacitive energy storage; signal transmission and ranging systems by capacitor discharges and lasers; and impulse measuring technique. This text specifically discusses the air spark under atmospheric conditions, industrial equipment for laser flashing, and claims for light transmitting system. The application of light impulse signal transmission, impulse measurements by means of spark gaps, and conversion factors of various energy units are also described. This publication is recommended for eager electrical engineering and physics students interested in optical pulses, lasers, and measuring techniques.

High Speed Pulse Technology, Volume 1: Capacitor Discharges - Magnetohydrodynamics - X-Rays - Ultrasonics deals with the theoretical and engineering problems that arise in the capacitor discharge technique. This book discusses the characteristics of dielectric material, symmetrical switch tubes with mercury filling, and compensation conductor forms. The transformed discharge for highest current peaks, ignition transformer for internal combustion engines, and X-ray irradiation of subjects in mechanical motion are also elaborated. This text likewise covers the transformed capacitor discharge in welding engineering, application of strong magnetic shock fields in nuclear physics, and shock sound by underwater capacitor discharges. Other topics include the shaping metals by electrical explosion shock wave and electro-erosion machining of metals. This volume is recommended for electrical engineering and physics students.

Advances in Machine Tool Design and Research 1967, Part I covers the proceedings of the 8th International M.T.D.R. conference (incorporating the 2nd international CIRP production engineering research conference) held in the University of Manchester, Institute of Science and Technology on September 1967. The book covers the accuracy of automatically controlled machine tools; the influence of the rigidity of the machine-workpiece-tool system on the roughness of the machined surface; and the analysis of machine tool structure by computing techniques. The text also discusses sensors of tool life for optimization of machining; pre-set tooling and its application; and system 24, a new concept of manufacture. The design of hydrostatic journal bearings; the computer approach for storage of machinability data and calculation of machining costs and production rates; and a comparison of different measuring and indicating methods for the determination of pitch errors of large precision gears are also encompassed. The book further presents the calibration of tool/work thermocouples, as well as the effect of tool flank wear on the temperatures generated during metal cutting.

Modern Developments in the Mechanics of Continua presents the proceedings of the International Conference on Rheology, held in Pinebrook, New York, on August 23–27, 1965. This book promotes the national and international interest in mechanics of continua. Comprised of 16 chapters, this compilation of papers starts with an overview of the fundamental aspects of thermodynamics. This text then examines the divergence between the molecular theory of liquids and continuum mechanics. Other chapters explore the theory of the activation volume of liquids and the potential applications in rheology. This book discusses as well the characteristics of shear wave propagation, which are related to the viscoelastic properties of the supporting medium. The final chapter deals with the study of diffusion of benzoic acid at constant temperature into kaolinite slurries of changing concentrations. This book is a valuable resource for physicists, biophysicists, mathematicians, and engineers interested in the mechanics of continua.

Progress in Astronautics and Rocketry, Volume 6: Detonation and Two-Phase Flow compiles technical papers presented at the ARS Propellants, Combustion, and Liquid Rockets Conference held in Palm Beach, Florida on April 26-28, 1961. This book provides an excellent illustration of research and development on a selected group of problems relating to detonations, two-phase nozzle flow, and combustion in liquid fuel rocket engines. This volume is divided into two parts. Part 1 covers the entire range of physical conditions under which detonation may be initiated or sustained, such as high explosives, solid propellants, liquid sprays, and gases. Experimental and theoretical studies are also discussed, including the significant progress of the basic phenomena involved in transition from deflagration to detonation, and nature of stable detonations in dilute sprays and other systems. The perennial problems associated with high frequency instabilities in liquid fuel rocket engines are considered in Part 2. This publication is valuable to students and investigators working in the field of propulsion research and development.

Radiation and Reentry is an integrated review of a series of publications dealing with radiative transfer theory, applied spectroscopy, radiation gas dynamics, and ablation phenomena. This book contains seven chapters and begins with a presentation of opacity calculations under conditions for which detailed considerations of spectral line structures and widths are not required. The discussion then shifts to the basic methods involved in the formulation of radiative transfer problems; origin and definition of the Planck and Rosseland mean free paths; the conservation equations for reacting, multicomponent gas mixtures with proper allowance for radiative energy flux; and similarity parameters in radiation gas dynamics. These topics are followed by a summary of data relevant to the optically thick, optically thin, and isothermal cases for air in local thermodynamic equilibrium. A chapter describes the radiative properties of spherical particles and their particle size distributions. Another chapter considers the estimation of radiant-energy transmission through atmosphere. The concluding chapters explore the radiation transfer effects on the flow about a re-entry body and the specific problems of the effect of radiant-energy transfer on acoustic waves, shock wave structure, and shock and boundary layers. These chapters also examine the theoretical and experimental studies on the ablation of re-entry vehicles. This book is of great value to educated nonspecialists who are interested in the application of radiation field to high-speed atmospheric entry.

Principles of Desalination focuses on the principles of the developing technology of large-scale desalting. This book presents the principal desalting methods and explores the process of hyperfiltration or reverse osmosis. Comprised of 11 chapters, this book starts with an overview of the water use and the problem of a potential water shortage. This text then discusses the fundamentals of the major desalting methods in use and explores the basic scientific and design principles that underlie the methods. Other chapters consider the method of vapor reheat distillation, which incorporates the liquid–liquid heat exchange principle. This book discusses as well the various aspects of ion exchange and explores the mechanisms in dual-purpose plants producing both distilled water and steam-turbine raised power. The final chapter considers the cost of conventional water supplies. This book is a valuable resource for technologists and scientists. Students in the graduate courses of engineering will also find this book useful.

Progress in Aeronautical Sciences, Volume 10 provides information pertinent to the development in aeronautical sciences. This book discusses a variety of topics, including thermoelasticity, turbulent boundary, as well as the manufacturing methods, reliability, problem areas, and applications under development in fluidic systems. Organized into six chapters, this volume begins with an overview of the theoretical problems of elasticity. This text then discusses the state of research in the complex fields of turbulent boundary layers with fluid injections. Other chapters consider as well the problems of supersonic flow past wings and bodies. This book discusses as well the flow in hypersonic wakes in ionized gases. The reader is also introduced to the possible applications of the compressible turbulent boundary layer with fluid injection. The final chapter discusses the components used in fluidic systems, which are described with emphasis on their general system of operation and general properties. This book is a valuable resource for engineers.

Treatise on Materials Science and Technology, Volume 5 covers the areas of thermodynamics, radiation effects, and mechanical properties. The book presents articles on solution thermodynamics; and on a fundamental and applied approach to the study of radiation-induced color centers. The text also includes articles on the basic types of metal fatigue and on the relationship between atomic order and the mechanical properties of alloys. Professional scientists and engineers, as well as graduate students in materials science and associated fields will find the book invaluable.

Strength of Materials: Theory and Examples covers the basic topics and mathematical aspect relating to the strength of materials. Each chapter of this book consists of a concise but thorough statement of the theory, followed by a number of worked examples in which the theory is amplified and extended. A large number of unworked examples and its respective answers are also provided. The topics include the bending stresses, torsion, deflection of beams, struts, and thin curved bars. This text likewise deliberates the shear stress in beams, unsymmetrical bending, elastic constants, and theories of failure. This publication is recommended for students who are in their first two years of an engineering degree or diploma course.

Electrical Installations Technology covers the syllabus of the City and Guilds of London Institute course No. 51, the “Electricians B Certificate”. This book is composed of 15 chapters that deal with basic electrical science and electrical installations. The introductory chapters discuss the fundamentals and basic electrical principles, including the concept of mechanics, heat, magnetic fields, electric currents, power, and energy. These chapters also explore the atomic theory of electric current and the electric circuit, conductors, and insulators. The subsequent chapter focuses on the chemistry of an electric cell, which is classified into two types, namely, the primary and secondary cells. This text also describes the principles, construction, types, and specifications of direct current machines. A chapter emphasizes the storage of energy for short periods in a capacitor, along with a brief discussion of its theory and construction. Other chapters are devoted to alternating-current systems. The remaining chapters cover the commonly used electrical measuring instruments in electrical installation work. This book is an invaluable source for electricians.

Mathematics for Engineering, Technology and Computing Science is a text on mathematics for courses in engineering, technology, and computing science. It covers linear algebra, ordinary differential equations, and vector analysis, together with line and multiple integrals. This book consists of eight chapters and begins with a discussion on determinants and linear equations, with emphasis on how the value of a determinant is defined and how it may be obtained. Solution of linear equations and the dependence between linear equations are also considered. The next chapter introduces the reader to matrix algebra and linear equations; ordinary differential equations; ordinary linear differential equations of the second order; and solution in power series of differential equations. The Laplace transformation is also examined, along with line and multiple integrals. The last chapter is devoted to vector analysis and includes the basic ideas needed for an algebra of vectors as well as examples and problems of several applications. This monograph will be of interest to students of mathematics, computer science, and engineering courses.

How to Find Out in Iron and Steel focuses on guides in conducting research on the manufacture and applications of iron and steel. The book first emphasizes the role of information services and libraries, literature guides, bibliographies, and periodicals in finding information on iron and steel. Topics include guides to sources of information; select lists of books and sources of information on books; and lists of periodicals. The manuscript then takes a look at the functions of periodical indexing and abstracting services in accessing information, including services dealing with science and technology; services solely focusing on iron and steel; and services dealing with the manufacture of iron and steel. The text also discusses the contributions of handbooks, dictionaries, monographs, treatises, textbooks, and standard works in conducting research on the two elements. English dictionaries that focus on a specific aspect of iron and steel technology, mechanical working, foundry practice, heat treatment, and mechanical properties and testing are underscored. The book also explains the different standards used in the manufacture and testing of iron and steel. The manuscript is a dependable reference for readers wanting to conduct research on the manufacture and applications of iron and steel.

How to Find Out About Engineering provides a guide to sources of information on engineering and its various branches. Topics include branches of engineering, careers in engineering, sources of engineering-related information, libraries, handbooks, patents, dictionaries and encyclopedias, and periodical literature. Engineering organizations as well as education and training for careers in engineering are also considered. This volume consists of 20 chapters; the first of which introduces the reader to jobs available in the engineering industry, along with guides and sources of information on careers. The discussion then turns to sources of information on engineering such as bibliographies, reference works, publishers'and booksellers'catalogs, government publications, and industrial liaison centers in Britain. The chapters that follow focus on libraries and other sources of information that are available to engineers and engineering students, including handbooks, standards, patents, and technical drawings and designs. Dictionaries, encyclopedias, theses, and translations are also covered. In addition, the book includes chapters on the history and biography of engineering as well as different branches of engineering, from mechanical to chemical, aeronautical, and agricultural engineering. This book will be of interest to all persons engaged in the engineering profession or are contemplating on entering the profession.

Heat Transfer: Current Applications of Air Conditioning deals with problems and applications of air conditioning. The discussions are organized around non-stationary heat transfer through walls; study of confined rooms or enclosures; calculation of cooling loads; heat transfer with two-phase refrigerants; measurement of thermal conductivity and water vapour permeability of insulating materials; and tests on air handling equipment (room air-conditioners, induction or fan coil air-conditioners). This book is comprised of 60 chapters and begins with an assessment of the unit-system controversy in the United States and the quest for an ultimate resolution. The following chapters explore the resolution of conductive heat transfer problems using the finite element method; thermal behavior of composite walls under transient conditions; thermal and electrical models for solving problems of non-stationary heat transfer through walls; and use of a radiometer to measure the average temperature of a wall. Experimental results for mixed air convection along a vertical surface are also presented. This monograph will be a valuable resource for electronics engineers.

Fatigue Testing and Analysis of Results discusses fundamental concepts of fatigue testing and results analysis. The book begins with a description of the symbols and nomenclature selected for the present book, mainly those proposed by the ASTM Committee E-9 on Fatigue. Fatigue testing methods are then discussed including routine tests, short-life and long-life tests, cumulative-damage tests, and abbreviated and accelerated tests. Separate chapters cover fatigue testing machines and equipment; instruments and measuring devices; and test pieces used in fatigue testing. The factors affecting test results are considered, including material, types of stressing, test machine, environment, and testing technique. The final two chapters cover the planning of test programs and the presentation of results. Test program planning involves the statistical design of a test series; specification and sampling of test pieces; and choice of test pieces, testing machines, and test conditions. The chief purpose of most fatigue tests is the experimental determination of the relation between the endurance and the magnitude of the applied stress range for the material and the specimen under consideration, and final results can be condensed into a table, graph, or analytical expression.

Engineering Plasticity deals with certain features of the theory of plasticity that can be applied to engineering design. Topics covered range from specification of an ideal plastic material to the behavior of structures made of idealized elastic-plastic material, theorems of plastic theory, and rotating discs, along with torsion, indentation problems, and slip-line fields. This book consists of 12 chapters and begins by providing an engineering background for the theory of plasticity, with emphasis on the use of metals in structural engineering; the nature of physical theories; and the conceptual simplicity and power of plastic theory. The next chapter explains how to set up a model of the plastic behavior of metal for use in analysis and design of structures and forming processes, paying particular attention to the plastic deformation that occurs when a specimen of metal is stressed. Subsequent chapters focus on the behavior of a simple structure made of elastic-plastic material; theorems of plastic theory; rotating discs; and indentation problems. Torsion, slip-line fields, and circular plates under transverse loading are also discussed, together with wire-drawing and extrusion and the effects of changes in geometry on structure. This monograph is written primarily for engineering students.

The Paper-making Machine: It's Invention, Evolution and Development covers the history of the paper-making machine and its origin and how it developed. This book is organized into 15 chapters, and starts with the discussion of the origin of the first paper-machine way back from A.D. 105 in China. The subsequent chapter deals with the development of the paper-machine where the British improved the machine and were then widely used by people. This topic is followed by discussions on the progress of paper making in 1830-1835 where an advanced type of Fourdrinier machine was introduced by Matthew Towgood and Leapidge South. Other chapters describe further improvements on the Fourdrinier machines and the paper-makings on the late 1800's. The last chapter considers the standardization of the paper-making machine during 1870-1890. This book will be of value to machine inventors and those who work in printing presses.

Momentum Transfer in Fluids provides information pertinent to fluid mechanics. This book discusses several topics related to the movement of fluids, including boundary-layer analysis, statistical treatment of turbulence, as well as laminar and turbulent shear-flow. Comprised of seven chapters, this book starts with an overview of the physical nature of momentum and describes the application of this concept to systems of variable weight, which are useful in the prediction of the physical behavior of fluids in motion. This text then explores the fundamental properties and the macroscopic aspects of turbulent flow. Other chapters present the significance and utility of mixing length and other macroscopic turbulence parameters. This book discusses as well the prediction of the velocity and friction as functions of position in the flowing stream. The final chapter deals with the qualitative aspects of boundary flows for compressible and incompressible fluids. This book is a valuable resource for scientists and chemical engineers.

Stability of Parallel Flows provides information pertinent to hydrodynamical stability. This book explores the stability problems that occur in various fields, including electronics, mechanics, oceanography, administration, economics, as well as naval and aeronautical engineering. Organized into two parts encompassing 10 chapters, this book starts with an overview of the general equations of a two-dimensional incompressible flow. This text then explores the stability of a laminar boundary layer and presents the equation of the inviscid approximation. Other chapters present the general equations governing an incompressible three-dimensional flow, which requires the massive use of a computer. This book discusses as well the experimental studies on the oscillations of the boundary layer wherein the mean flow is affected by the presence of oscillations. The final chapter describes the concept of the stability of turbulent flows found in boundary layers, wakes, and jets. This book is a valuable resource for physicists, mathematicians, engineers, scientists, and researchers.

Dieser Titel aus dem De Gruyter-Verlagsarchiv ist digitalisiert worden, um ihn der wissenschaftlichen Forschung zugänglich zu machen. Da der Titel erstmals im Nationalsozialismus publiziert wurde, ist er in besonderem Maße in seinem historischen Kontext zu betrachten. Mehr erfahren Sie