1,290 results on '"Mechanical engineering"'
Search Results
2. Integrated Computer Technologies in Mechanical Engineering - 2023 : Synergetic Engineering, Volume 2
- Author
-
Mykola Nechyporuk, Volodymir Pavlikov, Dmytro Krytskyi, Mykola Nechyporuk, Volodymir Pavlikov, and Dmytro Krytskyi
- Subjects
- Engineering mathematics, Engineering—Data processing, Mechanical engineering
- Abstract
The International Scientific and Technical Conference “Integrated Computer Technologies in Mechanical Engineering” – Synergetic Engineering (ICTM) was established by National Aerospace University “Kharkiv Aviation Institute”. The Conference ICTM'2023 was held in Kharkiv, Ukraine, during December, 2023. During this conference, technical exchanges between the research community were carried out in the forms of keynote speeches, panel discussions, as well as special session. In addition, participants were treated to a series of receptions, which forge collaborations among fellow researchers. ICTM'2023 received 202 papers submissions from different countries. All of these offer us plenty of valuable information and would be of great benefit to the experience exchange among scientists in modeling and simulation. The organizers of ICTM'2023 made great efforts to ensure the success of this conference. We hereby would like to thank all the members of ICTM'2023 Advisory Committee for their guidance and advice, the members of program committee and organizing committee, and the referees for their effort in reviewing and soliciting the papers, and all authors for their contribution to the formation of a common intellectual environment for solving relevant scientific problems. Also, we grateful to Springer - Janusz Kacprzyk and Thomas Ditzinger as the editor responsible for the series “Lecture Notes in Networks and Systems” for their great support in publishing these selected papers.
- Published
- 2024
3. Integrated Computer Technologies in Mechanical Engineering - 2023 : Synergetic Engineering, Volume 1
- Author
-
Mykola Nechyporuk, Volodymir Pavlikov, Dmytro Krytskyi, Mykola Nechyporuk, Volodymir Pavlikov, and Dmytro Krytskyi
- Subjects
- Engineering mathematics, Engineering—Data processing, Mechanical engineering
- Abstract
The International Scientific and Technical Conference “Integrated Computer Technologies in Mechanical Engineering” – Synergetic Engineering (ICTM) was established by National Aerospace University “Kharkiv Aviation Institute”. The Conference ICTM'2023 was held in Kharkiv, Ukraine, during December, 2023. During this conference, technical exchanges between the research community were carried out in the forms of keynote speeches, panel discussions, as well as special session. In addition, participants were treated to a series of receptions, which forge collaborations among fellow researchers. ICTM'2023 received 202 papers submissions from different countries. All of these offer us plenty of valuable information and would be of great benefit to the experience exchange among scientists in modeling and simulation. The organizers of ICTM'2023 made great efforts to ensure the success of this conference. We hereby would like to thank all the members of ICTM'2023 Advisory Committee for their guidance and advice, the members of program committee and organizing committee, and the referees for their effort in reviewing and soliciting the papers, and all authors for their contribution to the formation of a common intellectual environment for solving relevant scientific problems. Also, we grateful to Springer - Janusz Kacprzyk and Thomas Ditzinger as the editor responsible for the series “Lecture Notes in Networks and Systems” for their great support in publishing these selected papers.
- Published
- 2024
4. Book of Abstracts From 9th International Scientific Conference on Advances in Mechanical Engineering
- Author
-
Mihály Csüllög, Tamas Mankovits, Mihály Csüllög, and Tamas Mankovits
- Subjects
- Mechanical engineering--Congresses
- Abstract
The 9th International Scientific Conference on Advances in Mechanical Engineering (ISCAME, November 9-10, 2023, Debrecen, Hungary) was organized by the Department of Mechanical Engineering (Faculty of Engineering, University of Debrecen) and the Working Commission of Mechanical Engineering (Specialized Committee in Engineering, Regional Committee in Debrecen, Hungarian Academy of Sciences). The main goal of ISCAME is to yearly bring together engineers, scientists, researchers, practitioners from academia and industry to present their original works and share experiences regarding all aspects of mechanical engineering sciences.
- Published
- 2023
5. Integrated Computer Technologies in Mechanical Engineering - 2022 : Synergetic Engineering
- Author
-
Mykola Nechyporuk, Vladimir Pavlikov, Dmitriy Kritskiy, Mykola Nechyporuk, Vladimir Pavlikov, and Dmitriy Kritskiy
- Subjects
- Engineering mathematics, Engineering—Data processing, Mechanical engineering
- Abstract
The International Scientific and Technical Conference “Integrated Computer Technologies in Mechanical Engineering”—Synergetic Engineering (ICTM) was established by National Aerospace University “Kharkiv Aviation Institute.” The Conference ICTM'2022 was held in Kharkiv, Ukraine, during November 18–20, 2022. During this conference, technical exchanges between the research community were carried out in the forms of keynote speeches, panel discussions, as well as special session. In addition, participants were treated to a series of receptions, which forge collaborations among fellow researchers. ICTM'2022 received 137 papers submissions from different countries. All of these offer us plenty of valuable information and would be of great benefit to experience exchange among scientists in modeling and simulation. The organizers of ICTM'2022 made great efforts to ensure the success of this conference. We hereby would like to thank allthe members of ICTM'2022 Advisory Committee for their guidance and advice, the members of program committee and organizing committee, and the referees for their effort in reviewing and soliciting the papers, and all authors for their contribution to the formation of a common intellectual environment for solving relevant scientific problems. Also, we grateful to Springer—Janusz Kacprzyk and Thomas Ditzinger as the editor responsible for the series “Lecture Notes in Networks and Systems” for their great support in publishing these selected papers.
- Published
- 2023
6. Mechanical Engineering (5th Edition)
- Author
-
Suwarno Suwarno, Abdel El Kharbachi, Mohammad Khoirul Effendi, Yohanes Yohanes, Suwarno Suwarno, Abdel El Kharbachi, Mohammad Khoirul Effendi, and Yohanes Yohanes
- Subjects
- Materials science--Congresses, Mechanical engineering--Congresses
- Abstract
Selected peer-reviewed extended articles based on abstracts presented at the 5th International Conference on Mechanical Engineering (ICOME)Aggregated Book
- Published
- 2023
7. Predictive Analytics for Mechanical Engineering: A Beginners Guide
- Author
-
Parikshit N. Mahalle, Pravin P. Hujare, Gitanjali Rahul Shinde, Parikshit N. Mahalle, Pravin P. Hujare, and Gitanjali Rahul Shinde
- Subjects
- Predictive analytics, Maintenance, Mechanical engineering, Industry 4.0
- Abstract
This book focus on key component required for building predictive maintenance model. The current trend of Maintenance 4.0 leans towards the preventive mechanism enabled by predictive approach and condition-based smart maintenance. The intelligent decision support, earlier detection of spare part failure, fatigue detection is the main slices of intelligent and predictive maintenance system (PMS) leading towards Maintenance 4.0 This book presents prominent use cases of mechanical engineering using PMS along with the benefits. Basic understanding of data preparation is required for development of any AI application; in view of this, the types of the data and data preparation processes, and tools are also presented in this book.
- Published
- 2023
8. Innovations in Mechanical Engineering II
- Author
-
José Machado, Filomena Soares, Justyna Trojanowska, Erika Ottaviano, Petr Valášek, Mallikarjuna Reddy D., Eduardo André Perondi, Yevheniia Basova, José Machado, Filomena Soares, Justyna Trojanowska, Erika Ottaviano, Petr Valášek, Mallikarjuna Reddy D., Eduardo André Perondi, and Yevheniia Basova
- Subjects
- Engineering design, Manufactures, Dynamics, Nonlinear theories
- Abstract
This book covers a variety of topics in the field of mechanical engineering, with a special focus on methods and technologies for modeling, simulation, and design of mechanical systems. Based on a set of papers presented at the 2nd International Conference “Innovation in Engineering”, ICIE, held in Minho, Portugal, on June 28–30, 2022, it focuses on innovation in mechanical engineering, spanning from advanced materials and composites, optimization of manufacturing and production processes, and converging issues and technologies in additive manufacturing and industry 4.0. It covers applications in the transport and automotive, and medical and education sector, among others. This book, which belongs to a three-volume set, provides engineering researchers and professionals with extensive and timely information on new technologies and developments in the field of mechanical engineering and materials.
- Published
- 2022
9. Process Automation in a Medium-Sized Mechanical Engineering Company. Development of a Systematic Approach for the Identification of Potentials
- Author
-
Felix Metzger and Felix Metzger
- Abstract
Master's Thesis from the year 2020 in the subject Engineering - Industrial Engineering and Management, grade: 1,3, University of South Wales, language: English, abstract: In this thesis, a transferable concept is developed to identify possible automation potentials in existing processes in small and medium-sized enterprises, taking into account the following research questions: How does the existing process of machine labeling work? What are the weak points of the current process of machine labeling? How can possible weaknesses be eliminated and, in the best case, automated? Can the developed concept be transferred to other processes? This in turn raises the central research question of the scientific paper: How can a structured procedure for the identification of optimization potentials as a basis for process automation look like and what has to be considered when applying it? To answer these research questions, existing concepts in the relevant literature are examined with regard to their advantages and disadvantages for the planned application. From this, a procedure divided into three main steps is developed, which offers different methodologies for the steps to be worked on. The process to be investigated and the desired primary goal of automation determine which of the methods should be used. Subsequently, the practical suitability of the developed concept is tested on the given example process of machine labeling of a medium-sized mechanical engineering company. The results of the exemplary application show that it is possible to develop a clearly structured and easy to handle concept for a medium-sized company, which recognizes the weak points and optimization potentials.
- Published
- 2022
10. Integrated Computer Technologies in Mechanical Engineering - 2021 : Synergetic Engineering
- Author
-
Mykola Nechyporuk, Vladimir Pavlikov, Dmitriy Kritskiy, Mykola Nechyporuk, Vladimir Pavlikov, and Dmitriy Kritskiy
- Subjects
- Engineering mathematics, Engineering—Data processing
- Abstract
The International Scientific and Technical Conference “Integrated Computer Technologies in Mechanical Engineering” – Synergetic Engineering (ICTM) was established by National Aerospace University “Kharkiv Aviation Institute”. The Conference ICTM'2021 was held in Kharkiv, Ukraine, during October 28–29, 2021. During this conference, technical exchanges between the research community were carried out in the forms of keynote speeches, panel discussions, as well as special session. In addition, participants were treated to a series of receptions, which forge collaborations among fellow researchers. ICTM'2021 received 203 papers submissions from different countries. Target Groups ICTM was formed to bring together outstanding researchers and practitioners in the field of information technology in the design and manufacture of engines; creation of rocket space systems, aerospace engineering from all over the world to share their experience andexpertise.
- Published
- 2022
11. Advances in Engineering Research and Application : Proceedings of the International Conference on Engineering Research and Applications, ICERA 2023, Volume 1
- Author
-
Duy Cuong Nguyen, Do Trung Hai, Ngoc Pi Vu, Banh Tien Long, Horst Puta, Kai-Uwe Sattler, Duy Cuong Nguyen, Do Trung Hai, Ngoc Pi Vu, Banh Tien Long, Horst Puta, and Kai-Uwe Sattler
- Subjects
- Engineering mathematics, Engineering—Data processing, Mechanical engineering, Electrical engineering
- Abstract
This book covers the International Conference on Engineering Research and Applications (ICERA 2023), which was held on December 1–2, 2023 at Thai Nguyen University of Technology in Thai Nguyen, Vietnam, and provided an international forum to disseminate information on latest theories and practices in engineering research and applications. The conference focused on original research work in areas including mechanical engineering, materials and mechanics of materials, mechatronics and micro mechatronics, automotive engineering, electrical and electronics engineering, information and communication technology. By disseminating the latest advances in the field, the proceedings of ICERA 2023, Advances in Engineering Research and Application, assists academics and professionals alike to reshape their thinking on sustainable development.
- Published
- 2024
12. Advances in Engineering Research and Application : Proceedings of the International Conference on Engineering Research and Applications, ICERA 2023, Volume 2
- Author
-
Duy Cuong Nguyen, Do Trung Hai, Ngoc Pi Vu, Banh Tien Long, Horst Puta, Kai-Uwe Sattler, Duy Cuong Nguyen, Do Trung Hai, Ngoc Pi Vu, Banh Tien Long, Horst Puta, and Kai-Uwe Sattler
- Subjects
- Engineering mathematics, Engineering—Data processing, Mechanical engineering, Electrical engineering
- Abstract
This book covers the International Conference on Engineering Research and Applications (ICERA 2023), which was held on December 1–2, 2023 at Thai Nguyen University of Technology in Thai Nguyen, Vietnam, and provided an international forum to disseminate information on latest theories and practices in engineering research and applications. The conference focused on original research work in areas including mechanical engineering, materials and mechanics of materials, mechatronics and micro mechatronics, automotive engineering, electrical and electronics engineering, information and communication technology. By disseminating the latest advances in the field, the proceedings of ICERA 2023, Advances in Engineering Research and Application, assists academics and professionals alike to reshape their thinking on sustainable development.
- Published
- 2024
13. Computational Methods in Engineering
- Author
-
S. P. Venkateshan, Prasanna Swaminathan, S. P. Venkateshan, and Prasanna Swaminathan
- Subjects
- Engineering mathematics, Mechanics, Applied, Engineering—Data processing, Solids, Mechanical engineering
- Abstract
The book is designed to serve as a textbook for courses offered to graduate and upper-undergraduate students enrolled in mechanical engineering. The book attempts to make students with mathematical backgrounds comfortable with numerical methods. The book also serves as a handy reference for practicing engineers who are interested in applications. The book is written in an easy-to-understand manner, with the essence of each numerical method clearly stated. This makes it easy for professional engineers, students, and early career researchers to follow the material presented in the book. The structure of the book has been modeled accordingly. It is divided into four modules: i) solution of a system of equations and eigenvalues which includes linear equations, determining eigenvalues, and solution of nonlinear equations; ii) function approximations: interpolation, data fit, numerical differentiation, and numerical integration; iii) solution of ordinary differential equations—initial valueproblems and boundary value problems; and iv) solution of partial differential equations—parabolic, elliptic, and hyperbolic PDEs. Each section of the book includes exercises to reinforce the concepts, and problems have been added at the end of each chapter. Exercise problems may be solved by using computational tools such as scientific calculators, spreadsheet programs, and MATLAB codes. The detailed coverage and pedagogical tools make this an ideal textbook for students, early career researchers, and professionals.
- Published
- 2023
14. Design and Test of Dynamic Vibration Absorbers
- Author
-
Steven F. Griffin, Daniel J. Inman, Steven F. Griffin, and Daniel J. Inman
- Subjects
- Mechanical engineering, Multibody systems, Vibration, Mechanics, Applied, Engineering mathematics, Engineering—Data processing
- Abstract
The aim of this book is to educate the beneficiaries of this technology, because there is so little awareness and understanding of what can be achieved with tuned mass dampers and vibration absorbers and of the relatively small increase in mass and complexity in exchange for the tremendous benefit in vibration reduction. It introduces the feedback approach to help understand why these devices work and are very helpful in modeling the devices on complicated structures. The hardware demonstrators are simple and directly scalable to more complicated structures. Once a reader successfully operates the demonstration hardware, the concepts in the book are directly scalable to implementations on very complex structures like airplanes and rockets. A recipe is provided to 3D print most of the parts as well as easy-to-find brackets and sensors. The whole kit can be assembled in an afternoon. The directions will be similar in detail to a DIY magazine article, providing simple, step-by-step procedures. Via app: download the SN More Media app for free, scan a link with play button and access MP4 directly on your smartphone or tablet.
- Published
- 2023
15. Fiber Bundles : Statistical Models and Applications
- Author
-
James U. Gleaton, David Han, James D. Lynch, Hon Keung Tony Ng, Fabrizio Ruggeri, James U. Gleaton, David Han, James D. Lynch, Hon Keung Tony Ng, and Fabrizio Ruggeri
- Subjects
- Statistics, Engineering mathematics, Engineering—Data processing, Electrical engineering, Mechanical engineering, Electronic circuits
- Abstract
This book presents a critical overview of statistical fiber bundle models, including existing models and potential new ones. The authors focus on both the physical and statistical aspects of a specific load-sharing example: the breakdown for circuits of capacitors and related dielectrics. In addition, they investigate some areas of open research.This book is designed for graduate students and researchers in statistics, materials science, engineering, physics, and related fields, as well as practitioners and technicians in materials science and mechanical engineering.
- Published
- 2023
16. Mathematical Modeling of Dislocation Behavior and Its Application to Crystal Plasticity Analysis
- Author
-
Tetsuya Ohashi and Tetsuya Ohashi
- Subjects
- Mechanical engineering, Materials, Engineering mathematics, Engineering—Data processing
- Abstract
There are several textbooks and monographs on dislocations and the mechanical and physical properties of metals, but most of them discuss the topics in terms of more or less one-dimensional or scalar quantities. However, actual metallic materials are often three-dimensionally heterogeneous in their microstructure, and this heterogeneity has a significant impact on the macroscopic mechanical properties. With advances in computational technology, the complexity introduced by spatial heterogeneity in the microstructure of metals can now be explored using numerical methods. This book explains in simple terms the idea of extending the continuum mechanics theory of plastic deformation of crystals to three-dimensional analysis and applying it to the analysis of more realistic models of metal microstructures. This book links solid mechanics and materials science by providing clear physical pictures and mathematical models of plastic slip deformation and the accumulation of dislocations and atomic vacancies in metallic materials. Both monotonic and cyclic loading cases are considered.
- Published
- 2023
17. An Introduction to Finite Element Analysis Using Matlab Tools
- Author
-
Shuvra Das and Shuvra Das
- Subjects
- Mechanical engineering, Engineering mathematics, Engineering—Data processing, Mathematics—Data processing
- Abstract
This book is an attempt to develop a guide for the user who is interested in learning the method by doing. There is enough discussion of some of the basic theory so that the user can get a broad understanding of the process. And there are many examples with step-by-step instructions for the user to quickly develop some proficiency in using FEA. We have used Matlab and its PDE toolbox for the examples in this text. The syntax and the modeling process are easy to understand and a new user can become productive very quickly. The PDE toolbox, just like any other commercial software, can solve certain classes of problems well but is not capable of solving every type of problem. For example, it can solve linear problems but is not capable of handling non-linear problems. Being aware of the capabilities of any tool is an important lesson for the user and we have, with this book, tried to highlight that lesson as well.
- Published
- 2023
18. Advances in Engineering Research and Application : Proceedings of the International Conference on Engineering Research and Applications, ICERA 2022
- Author
-
Duy Cuong Nguyen, Ngoc Pi Vu, Banh Tien Long, Horst Puta, Kai-Uwe Sattler, Duy Cuong Nguyen, Ngoc Pi Vu, Banh Tien Long, Horst Puta, and Kai-Uwe Sattler
- Subjects
- Engineering mathematics, Engineering—Data processing, Mechanical engineering, Electrical engineering
- Abstract
The International Conference on Engineering Research and Applications (ICERA 2022), held on December 1-2, 2022, at Thai Nguyen University of Technology in Thai Nguyen, Vietnam, provided an international forum to disseminate information on latest theories and practices in engineering research and applications. The conference focused on original research work in areas including mechanical engineering, materials and mechanics of materials, mechatronics and micro mechatronics, automotive engineering, electrical and electronics engineering, information and communication technology. By disseminating the latest advances in the field, the Proceedings of ICERA 2022, Advances in Engineering Research and Application, assists academics and professionals alike to reshape their thinking on sustainable development.
- Published
- 2022
19. Kinematics of Mechanical Systems : Fundamentals, Analysis and Synthesis
- Author
-
Jorge Angeles, Shaoping Bai, Jorge Angeles, and Shaoping Bai
- Subjects
- Multibody systems, Vibration, Mechanics, Applied, Engineering mathematics, Mechanical engineering, Control engineering, Robotics, Automation
- Abstract
This book is aimed to provide comprehensive and systematic knowledge of kinematic synthesis as developed up to date. Modern mechanical systems require advance kinematics knowledge to support mechanism design with sound theories and methods. The book includes not only the classical foundations of kinematic synthesis, but also the latest advances developed by the authors. Moreover, many examples are included to illustrate both methods and their supporting theory.The focus is on systems of rigid bodies forming closed loops. The four-bar linkage, representing the foundations of mechanical systems, is given due attention, in its three domains: planar, spherical, and spatial. The book contains six chapters, the first two covering fundamentals for kinematic synthesis, including qualitative synthesis. Chapters 3–5 describe, in full detail, the function, motion, and path syntheses of single-dof linkages. In the last chapter, the synthesis of single-dof complex linkages, including six-bar and ten-bar linkages, is introduced.The book is suitable for graduate students of mechanical engineering, researchers of mechanism and robot design, and machine design engineers.
- Published
- 2022
20. Nonlinear Vibration Reduction : An Electromagnetically Tuned Mass Damper System
- Author
-
Albert C. J. Luo, Chuan Guo, Albert C. J. Luo, and Chuan Guo
- Subjects
- Engineering mathematics, Engineering—Data processing, Multibody systems, Vibration, Mechanics, Applied, Mechanical engineering
- Abstract
The tuned mass damper is one of the classic dynamic vibration absorbers with effective devices for energy dissipation and vibration reduction. The electromagnetically tuned mass damper system is extensively used for vibration reduction in engineering. A better understanding of the nonlinear dynamics of the electromagnetically tuned mass damper system is very important to optimize the parameters of such systems for vibration reduction. However, until now, one cannot fully understand complex periodic motions in such a nonlinear, electromagnetically tuned mass damper system. In this book, the semi-analytical solutions of periodic motions are presented through period-1, period-3, period-9, and period-12 motions. The corresponding stability and bifurcations of periodic motions are determined. The frequency-amplitude characteristics for bifurcation routes of such higher-order periodic motions are presented. This book helps people better understand the dynamical behaviors of an electromagnetically tuned mass damper system for the new development and design of vibration reduction and energy harvesting systems.
- Published
- 2022
21. Complex Variables for Engineers with Mathematica
- Author
-
Seiichi Nomura and Seiichi Nomura
- Subjects
- Mechanical engineering, Engineering mathematics, Engineering—Data processing, Mathematics
- Abstract
Complex variable theory is attractive for engineers as it offers elegant approaches for certain types of differential equations in engineering including heat transfer, solid mechanics, and fluid mechanics. However, a gap exists between books written by mathematicians and books written by engineers in their specific fields. Naturally, mathematicians tend to emphasize rigorousness and consistency while less emphasizing applications. On the other hand, books written by engineers often jump directly to the specific topics assuming that the readers already have sufficient background of complex variables and the pathway from theory to the application is not clearly elucidated. This book closes the gap in the literature. providing a smooth transition from basic theory to the application is accomplished. Although it is not possible to cover all the topics in engineering exhaustively, the readers can at least find the logic of how and why complex variables are effective for some of the engineering problems. Another motivation for writing this book is to demonstrate that the readers can take advantage of a computer algebra system, Mathematica, to facilitate tedious algebra and visualize complex functions so that they can focus on principles instead of spending endless hours on algebra by hand. Unlike numerical tools such as MATLAB and FORTRAN, Mathematica can expand, differentiate, and integrate complex-valued functions symbolically. Mathematica can be used as a stand-alone symbolic calculator or a programming tool using the Wolfram Language. If Mathematica is not available locally, Wolfram Cloud Basic can be used online as a free service to execute Mathematica statements.
- Published
- 2022
22. Advances in Engineering Research and Application : Proceedings of the International Conference on Engineering Research and Applications, ICERA 2021
- Author
-
Duy Cuong Nguyen, Ngoc Pi Vu, Banh Tien Long, Horst Puta, Kai-Uwe Sattler, Duy Cuong Nguyen, Ngoc Pi Vu, Banh Tien Long, Horst Puta, and Kai-Uwe Sattler
- Subjects
- Engineering mathematics, Engineering—Data processing, Mechanical engineering, Electrical engineering
- Abstract
This book covers the International Conference on Engineering Research and Applications (ICERA 2021), which took place at Thai Nguyen University of Technology, Thai Nguyen, Vietnam on December 1–2, 2021, and provided an international forum to disseminate information on latest theories and practices in engineering research and applications. The conference focused on original research work in areas including mechanical engineering, materials and mechanics of materials, mechatronics and micromechatronics, automotive engineering, electrical and electronics engineering, information and communication technology. By disseminating the latest advances in the field, the Proceedings of ICERA 2021, Advances in Engineering Research and Application, helps academics and professionals alike to reshape their thinking on sustainable development.
- Published
- 2022
23. Structural Dynamics of Liquid Rocket Engines : A Holistic Approach
- Author
-
Andrew M. Brown and Andrew M. Brown
- Subjects
- Liquid propellant rocket engines, Rocket engines, Mechanical engineering
- Abstract
This is the first Structural Dynamics book focused on this indispensable aspect of liquid rocket engine design. This book begins by reviewing basic concepts in Structural Dynamics, including the free and forced response of SDOF and MDOF systems, along with some discussion of how numerical solutions are generated. The book then moves to a discussion of specific applications of these techniques in LREs, progressing from component level (turbomachinery and combustion devices), up through engine system models, and finally to integration with a launch vehicle. Clarifies specific topics including the Campbell and SAFE Diagrams for resonance identification in turbomachinery, the complications of component analysis in the pump side due to a host of complication factors such as acoustic/structure interaction, the'side-loads'fluid/structure interaction problem in overexpanded rocket nozzles, and competing methods for generation overall engine system interface loads. Includes specific examplesfor illustration while closing with rotordynamic analysis, dynamic data analysis, and vibroacoustics.
- Published
- 2022
24. Periodic Motions to Chaos in a Spring-Pendulum System
- Author
-
Yu Guo, Albert C. J. Luo, Yu Guo, and Albert C. J. Luo
- Subjects
- Nonlinear systems, Mechanical engineering, Pendulum, Chaotic behavior in systems
- Abstract
This book builds on the fundamental understandings, learned in undergraduate engineering and physics in principles of dynamics and control of mechanical systems. The design of real-world mechanical systems and devices becomes far more complex than the spring-pendulum system to which most engineers have been exposed. The authors provide one of the simplest models of nonlinear dynamical systems for learning complex nonlinear dynamical systems. The book addresses the complex challenges of the necessary modeling for the design of machines. The book addresses the methods to create a mechanical system with stable and unstable motions in environments influenced by an array of motion complexity including varied excitation frequencies ranging from periodic motions to chaos. Periodic motions to chaos, in a periodically forced nonlinear spring pendulum system, are presented through the discrete mapping method, and the corresponding stability and bifurcations of periodic motions on the bifurcation trees are presented. Developed semi-analytical solutions of periodical motions to chaos help the reader to understand complex nonlinear dynamical behaviors in nonlinear dynamical systems. Especially, one can use unstable motions rather than stable motions only.
- Published
- 2022
25. Octave and MATLAB for Engineering Applications
- Author
-
Andreas Stahel and Andreas Stahel
- Subjects
- Mechanical engineering, Industrial engineering, Production engineering, Statistics, Engineering—Data processing
- Abstract
For many engineering tasks extensive computations or visualizations are required. The well established Matlab and Octave (a very similar open source software) are excellent tools for modeling, computing and visualization. This book will help the reader to acquire basic knowledge and elementary programming skills with Octave/Matlab. Basic data and programming structures are presented and for the most often used commands illustrative code samples are provided. The selection of the presented commands is guided by the typical needs of engineers. With these skills many and more difficult problems can be solved successfully. It is shown how basic statistical questions can be answered and how results are visualized using appropriate types of graphical representation. A selection of typical, independent engineering problems is presented, together with algorithms to solve these problems. Special attention is given to the methods of linear and nonlinear regression. The high level tool Matlab/Octave is used to develop computational code for micro controllers. The codes and data files for the book are available on Github and on Springer Link.The Target GroupsStudents in electrical and mechanical engineering and engineering fields in generalWorking engineers
- Published
- 2022
26. International Journal of Engineering Research in Africa Vol. 71
- Author
-
Akii Okonigbon Akaehomen Ibhadode and Akii Okonigbon Akaehomen Ibhadode
- Subjects
- Building materials, Chemical engineering, Chemistry, Engineering, Manufactures, Mechanical engineering, Mining engineering, Physics, Science, Technology
- Abstract
The 71st volume of the journal is dedicated to recent achievements in engineering practice and scientific research results in a wide range of industrial branches. The transport mechanism in the diffusion layer in proton exchange membrane fuel cell, mechanical characteristics and performance of various green building materials, predictive control for biomass boiler and automatic generation control in power system, and also analysis of efficient resource allocation in cloud computing are the topics of this issue. This journal's volume will be helpful to many engineers in the modern production sector and construction.
- Published
- 2024
27. The 2nd International Conference on the Future Sustainable Energy
- Author
-
Hasan Sh. Majdi, Azher M. Abed, Salwan Obaid Waheed Khafaji, Mustafa Baqir Hunain, Hasan Sh. Majdi, Azher M. Abed, Salwan Obaid Waheed Khafaji, and Mustafa Baqir Hunain
- Subjects
- Bioengineering, Building, Building materials, Chemical engineering, Chemistry, Civil engineering, Electrical engineering, Engineering, Highway engineering, Manufactures, Mechanical engineering, Mining engineering, Physics, Railroad engineering, Technology
- Abstract
Selected peer-reviewed extended articles based on abstracts presented at the 2nd International Conference on the Future Sustainable Energy (ICFSE 2024)Aggregated Book
- Published
- 2024
28. Machine Learning for Econometrics and Related Topics
- Author
-
Vladik Kreinovich, Songsak Sriboonchitta, Woraphon Yamaka, Vladik Kreinovich, Songsak Sriboonchitta, and Woraphon Yamaka
- Subjects
- Mechanical engineering, Economics, Engineering mathematics, Engineering—Data processing
- Abstract
In the last decades, machine learning techniques – especially techniques of deep learning – led to numerous successes in many application areas, including economics. The use of machine learning in economics is the main focus of this book; however, the book also describes the use of more traditional econometric techniques. Applications include practically all major sectors of economics: agriculture, health (including the impact of Covid-19), manufacturing, trade, transportation, etc. Several papers analyze the effect of age, education, and gender on economy – and, more generally, issues of fairness and discrimination.We hope that this volume will:help practitioners to become better knowledgeable of the state-of-the-art econometric techniques, especially techniques of machine learning,and help researchers to further develop these important research directions. We want to thank all the authors for their contributions and all anonymous referees for their thorough analysis and helpful comments.
- Published
- 2024
29. Machines and Equipment
- Author
-
Muthusamy Nallusamy, Azzah Dyah Pramata, Khairunisak Abdul Razak, Muthusamy Nallusamy, Azzah Dyah Pramata, and Khairunisak Abdul Razak
- Subjects
- Building, Building materials, Chemical engineering, Chemistry, Engineering, Environmental engineering, Highway engineering, Industrial engineering, Manufactures, Mechanical engineering, Mining engineering, Physics, Railroad engineering, Science, Technology, Technology--Environmental aspects
- Abstract
Special topic volume with invited peer-reviewed papers only
- Published
- 2024
30. The Finite Element Method : A Primer
- Author
-
Jacobo Bielak and Jacobo Bielak
- Subjects
- Mechanical engineering, Civil engineering, Electrical engineering, Numerical analysis, Engineering mathematics, Engineering—Data processing
- Abstract
This textbook introduces the widely used numerical technique FEM in various engineering disciplines for the analysis of structures, heat transfer, fluid dynamics, and other physical phenomena. Appropriate for interested senior undergraduate engineering students and beginner graduate students in a one-semester introductory course, this book provides a clear understanding of the main issues in FEM. Looking at the FEM as a variational approximation method that uses localized piecewise polynomial basis functions for the solution of boundary-value problems (BVP) and initial boundary-value problems (IBVP), the book uses examples to apply this technique to various problems of physical interest, e.g., elasticity, heat conduction, advection-diffusion, etc. One-dimensional (1D) problems are presented first to make it easier to grasp the fundamental concepts associated with the formulation and application of the FEM; then, the methodology is extended to more challenging 2D and 3D problems that involve somewhat greater mathematical complexity. For simplicity, the book deals with problems that are specified in terms of a single set of state variables, such as displacements or temperature. Finally, due to the introductory nature of this text, only linear problems are considered.
- Published
- 2024
31. Modelling Spark Ignition Combustion
- Author
-
P. A. Lakshminarayanan, Avinash Kumar Agarwal, Haiwen Ge, J. M. Mallikarjuna, P. A. Lakshminarayanan, Avinash Kumar Agarwal, Haiwen Ge, and J. M. Mallikarjuna
- Subjects
- Engines, Mechanical engineering, Vehicles
- Abstract
The book provides a comprehensive overview of combustion models used in different types of spark ignition engines. In the first generation of spark ignition (SI) engines, the turbulence is created by the shear flow passing through the intake valves, and significantly decays during the intake and compression strokes. The residual turbulence enhances the laminar flame velocity, which is characteristic of the fuel and increases the relative effectiveness of the engine. In this simple two-zone model, the turbulence is estimated empirically; the spherical flame propagation model considers ignition delay, thermodynamics, heat transfer and chemical equilibrium, to obtain the performance and emissions of an SI engine. The model is used extensively by designers and research engineers to handle the fuel-air mixture prepared in the inlet and different geometries of open combustion chambers. The empiricism of the combustion model was progressively dismantled over the years. New 3D models for ignition considering the flow near a spark plug and flame propagation in the bulk gases were developed by incorporating solutions to Reynolds-averaged Navier-Stokes (RANS) equations for the turbulent flow with chemical reactions in the intense computational fluid dynamics. The models became far less empirical and enabled treating new generation direct-injection spark-ignition (DISI) gasoline and gas engines. The more complex layout of DISI engines with passive or active prechamber is successfully handled by them. This book presents details of models of SI engine combustion progressively increasing in complexity, making them accessible to designers, researchers, and even mechanical engineers who are curious to explore the field. This book is a valuable resource for anyone interested in spark ignition combustion.
- Published
- 2024
32. International Conference on Functional Materials for Energy and Manufacturing (ICFMEM)
- Author
-
S. Harikrishnan, Paulo Cachim, Hafiz Muhammad Ali, Kamrul Hasan Talukder, Md. Shamim Ahsan, K.M. Pandey, Hakan F. Oztop, S. Harikrishnan, Paulo Cachim, Hafiz Muhammad Ali, Kamrul Hasan Talukder, Md. Shamim Ahsan, K.M. Pandey, and Hakan F. Oztop
- Subjects
- Chemical engineering, Chemistry, Engineering, Environmental engineering, Industrial engineering, Mechanical engineering, Physics, Technology, Technology--Environmental aspects
- Abstract
Selected peer-reviewed full text papers from the International Conference on Functional Materials for Energy and Manufacturing (ICFMEM2023)Selected peer-reviewed full text papers from the International Conference on Functional Materials for Energy and Manufacturing (ICFMEM2023), July 26, 2023, Kancheepuram, India
- Published
- 2024
33. Project + VBA für Manager : Erweiterung der Project-Nutzung durch VBA-Prozeduren
- Author
-
Harald Nahrstedt and Harald Nahrstedt
- Subjects
- Mechanical engineering, Engineering mathematics, Engineering—Data processing, Project management
- Abstract
Dieses praxisbezogene Fachbuch zeigt die Nutzung von MS Project in allen Phasen eines Projekts. Mithilfe von VBA-Prozeduren erfährt die Nutzung eine deutliche Erweiterung, auch in der Anbindung zu weiteren Office-Anwendungen. Neben den Grundlagen von Project und VBA stellt das Buch deren Nutzung von der Projektidee über die Grob- und Feinplanung von Ressourcen wie Arbeit und Zeit bis hin zur Kontrolle von Fertigstellungsgrad und Meilensteinen dar. Dabei werden immer Möglichkeiten aufgezeigt, die Anwendungen gemäß der eigenen Projektbedürfnisse optimal zu gestalten. Downloads auf der Homepage des Autors helfen beim Einstieg in die Thematik und laden dazu ein, selbst kreativ zu werden.
- Published
- 2024
34. Machine Building and Energy: New Concepts and Technologies (2nd MBENCT)
- Author
-
Subhan Namazov, Nizami Yusubov, Sylvio Simon, Subhan Namazov, Nizami Yusubov, and Sylvio Simon
- Subjects
- Chemical engineering, Chemistry, Engineering, Industrial engineering, Manufactures, Mechanical engineering, Mining engineering, Physics, Science, Technology
- Abstract
Selected peer-reviewed full text papers from the 2nd International Scientific-Practical Conference'Machine Building and Energy: New Concepts and Technologies'(MBENCT 2023)
- Published
- 2024
35. Programming with Python for Engineers
- Author
-
Sinan Kalkan, Onur T. Şehitoğlu, Göktürk Üçoluk, Sinan Kalkan, Onur T. Şehitoğlu, and Göktürk Üçoluk
- Subjects
- Python (Computer program language), Computer programming, Electrical engineering, Engineering mathematics, Engineering—Data processing, Mechanical engineering, Civil engineering
- Abstract
This book introduces computing and programming with undergraduate engineering students in mind. It uses Python (Version 3) as the programming language, chosen for its simplicity, readability, wide applicability and large collection of libraries. After introducing engineering-related Python libraries, such as NumPy, Pandas, Matplotlib, Sci-kit, Programming with Python for Engineers shows how Python can be used to implement methods common in a wide spectrum of engineering-related problems drawn from (for example): design, control, decision-making, scheduling and planning. Important features of the book include the following: The book contains interactive content for illustration of important concepts, where the user can provide input and by clicking buttons, trace through the steps. Each chapter is also accessible as a Jupyter Notebook page and every code piece is executable. This allows the readers to run code examples in chapters immediately, to make changes and gain a better grasp of the concepts presented. The coverage of topics is complemented by illustrative examples and exercises. For instructors adopting the textbook, a solutions manual is provided at https://sites.google.com/springernature.com/extramaterial/lecturer-material.
- Published
- 2024
36. A First Course in Boundary Element Methods
- Author
-
Steven L. Crouch, Sofia G. Mogilevskaya, Steven L. Crouch, and Sofia G. Mogilevskaya
- Subjects
- Mechanics, Applied, Mechanical engineering, Engineering mathematics, Engineering—Data processing
- Abstract
This textbook delves into the theory and practical application of boundary integral equation techniques, focusing on their numerical solution for boundary value problems within potential theory and linear elasticity. Drawing parallels between single and double layer potentials in potential theory and their counterparts in elasticity, the book introduces various numerical procedures, namely boundary element methods, where unknown quantities reside on the boundaries of the region of interest. Through the approximation of boundary value problems into systems of algebraic equations, solvable by standard numerical methods, the text elucidates both indirect and direct approaches. Indirect methods involve single or double layer potentials separately while direct methods combine these potentials using Green's or Somigliana's formulas. The two approaches give comparable results for general boundary value problems. Tailored for beginning graduate students, this self-contained textbook offers detailed analytical and numerical derivations for isotropic and anisotropic materials, prioritizing simplicity in presentation while progressively advancing towards more intricate mathematical concepts, particularly focusing on two-dimensional problems within potential theory and linear elasticity.
- Published
- 2024
37. Machine Building and Energy: New Concepts and Technologies (MBENCT)
- Author
-
Subhan Namazov, Nizami Yusubov, Sylvio Simon, Subhan Namazov, Nizami Yusubov, and Sylvio Simon
- Subjects
- Chemical engineering, Chemistry, Engineering, Industrial engineering, Manufactures, Mechanical engineering, Mining engineering, Physics, Science, Technology
- Abstract
Selected peer-reviewed full text papers from the 2nd International Scientific-Practical Conference'Machine Building and Energy: New Concepts and Technologies'(MBENCT 2023)
- Published
- 2024
38. 6th International Conference on Advanced Materials Science
- Author
-
Sarjito Sarjito, Waluyo Adi Siswanto, Mohammad Sukri Mustapa, Agus Dwi Anggono, Tri Widodo Besar Riyadi, Sarjito Sarjito, Waluyo Adi Siswanto, Mohammad Sukri Mustapa, Agus Dwi Anggono, and Tri Widodo Besar Riyadi
- Subjects
- Chemical engineering, Chemistry, Engineering, Mechanical engineering, Physics, Technology
- Abstract
Selected peer-reviewed full text papers from the 6th International Conference on Advanced Materials Science (ICoAMS 2023)Selected peer-reviewed full text papers from the 6th International Conference on Advanced Materials Science (ICoAMS 2023), August 23-24, 2023, Surakarta, Indonesia
- Published
- 2024
39. The 11th Asia Conference on Mechanical and Materials Engineering (ACMME)
- Author
-
Omar S. Es-Said and Omar S. Es-Said
- Subjects
- Chemical engineering, Chemistry, Engineering, Industrial engineering, Manufactures, Mechanical engineering, Mining engineering, Physics, Technology
- Abstract
Selected peer-reviewed full text papers from the 11th Asia Conference on Mechanical and Materials Engineering (ACMME 2023)Selected peer-reviewed full text papers from the 11th Asia Conference on Mechanical and Materials Engineering (ACMME 2023), June 8-11, 2023, Sapporo, Japan
- Published
- 2024
40. 2nd International Scientific-Practical Conference Machine Building and Energy: New Concepts and Technologies (MBENCT)
- Author
-
Subhan Namazov, Nizami Yusubov, Sylvio Simon, Subhan Namazov, Nizami Yusubov, and Sylvio Simon
- Subjects
- Chemical engineering, Chemistry, Electrical engineering, Engineering, Environmental engineering, Industrial engineering, Manufactures, Mechanical engineering, Mining engineering, Physics, Science, Technology, Technology--Environmental aspects
- Abstract
Selected peer-reviewed extended articles based on abstracts presented at the 2nd International Scientific-Practical Conference'Machine Building and Energy: New Concepts and Technologies'(MBENCT 2023)Aggregated Book
- Published
- 2024
41. International Conference on Advancements in Materials, Manufacturing & Automation
- Author
-
V. Jayakumar, J. Paulo Davim, V. Dhinakaran, V. Jayakumar, J. Paulo Davim, and V. Dhinakaran
- Subjects
- Chemical engineering, Chemistry, Engineering, Manufactures, Mechanical engineering, Mining engineering, Physics, Technology
- Abstract
Selected peer-reviewed extended articles based on abstracts presented at the 1st International Conference on Advancements in Materials, Manufacturing and Automation (AMMA-2023)Aggregated Book
- Published
- 2024
42. Africa International Conference on Clean Energy and Energy Storage
- Author
-
Roland Uhunmwangho, Sunday Olayinka Oyedepo, Ogheneruona Endurance Diemuodeke, Fidelis Abam, Veronica Edeminam, Anthony Akpasoh, Roland Uhunmwangho, Sunday Olayinka Oyedepo, Ogheneruona Endurance Diemuodeke, Fidelis Abam, Veronica Edeminam, and Anthony Akpasoh
- Subjects
- Environmental engineering, Industrial engineering, Mechanical engineering, Physics, Technology, Technology--Environmental aspects
- Abstract
Selected peer-reviewed full text papers from the 1st Africa International Conference on Clean Energy and Energy Storage (AICCEES)Selected peer-reviewed full text papers from the 1st Africa International Conference on Clean Energy and Energy Storage (AICCEES), November 23-24, 2023, Port Harcourt, Nigeria
- Published
- 2024
43. Jet Web : Zur Entwicklungsgeschichte der Turbojet-Triebwerke 1920-1950
- Author
-
Dietrich Eckardt and Dietrich Eckardt
- Subjects
- Technology, History, Aerospace engineering, Astronautics, Mechanical engineering, Engineering design, Engines
- Abstract
Das vorliegende Buch beschreibt die Entwicklungsgeschichte der Turbo-Luftstrahltriebwerke, hauptsächlich im Beziehungsdreieck Großbritannien (USA) – Deutschland – Schweiz von frühen Anfängen in den 1920er Jahren bis zu ersten zivilen Anwendungen in den späten 1950er Jahren, ehe der bis heute anhaltende Siegeszug des Welt-Luftverkehrs begann. Unerwartete Verbindungen werden hervorgehoben, insbesondere der beträchtliche Einfluss der Axialverdichter-Technologie des schweizerisch-deutschen Unternehmens BBC Brown Boveri & Cie. auf die beiden anderen Seiten.Der Autor deckt wichtige Beziehungen und Abhängigkeiten auf, die einen erheb-lichen technischen Austausch förderten, und daher zu einer Änderung der bisherigen technisch-historischen Betrachtungsweise führen müssen, insbesondere in den entscheidenden Jahren vor Beginn des Zweiten Weltkriegs. Damit werden bestehende Lücken in der bisher allzu einseitigen Sicht auf diesen technisch herausragenden Entwicklungsfortschritt geschlossen.Die überlieferte ‚Whittle vs. von Ohain Saga‘ wird nicht in Gänze wiederholt, aber insoweit angesprochen, wie es zum Verständnis des nunmehr erheblich erweiterten Geschichtsbilds erforderlich ist.
- Published
- 2023
44. Introduction to the Theory of Smart Electromechanical Systems
- Author
-
Andrey E. Gorodetskiy, Irina L. Tarasova, Andrey E. Gorodetskiy, and Irina L. Tarasova
- Subjects
- Computational intelligence, Mechanical engineering, Mechanics, Applied
- Abstract
This book aims to familiarize with the basics of the SEMS theory, including logical-probabilistic and logical-linguistic methods for their design and modeling, taking into account the incomplete certainty of the operating environment and the mental characteristics of the members of the human–machine systems collective. Smart electromechanical systems (SEMS) are used in cyber-physical systems (CPS). The main tasks in the field of theory and practice of CPS are to ensure the efficiency, reliability and safety of operation in real time.SEMS have been widely used since 2000 in parallel robots or so-called parallel kinematic machines. They offer good opportunities in terms of precision, rigidity and the ability to handle heavy loads. SEMS are used in unmanned vehicles, astronomy, machine tools, medicine and other fields.Currently, much attention is paid to the methods of designing and modeling SEMS based on the principles of adaptability, intelligence, biomorphism of parallel kinematics and parallelism in information processing and control calculations. The book consists of four parts:- Mechanisms and control systems;- The central nervous system;- Group control;- Examples of using SEMS modules.The book is recommended for specialists in the field of control, as well as a textbook for masters of universities specializing in the field of smart electromechanical systems and robotics and includes many scientific fields such as kinematics, dynamics and control theory.
- Published
- 2023
45. International Journal of Engineering Research in Africa Vol. 63
- Author
-
Akii Okonigbon Akaehomen Ibhadode and Akii Okonigbon Akaehomen Ibhadode
- Subjects
- Building materials, Chemical engineering, Chemistry, Engineering, Environmental engineering, Mechanical engineering, Physics, Science, Technology, Technology--Environmental aspects
- Abstract
This volume of the journal represents the research results of properties and synthesis technologies for a multifunctional hydrogel material, concrete with aggregate from plastic waste, numerical modelling of natural convection processes in the elliptical cylinders, analysed the wastewater treatment technologies based on the use of natural chemicals and based on electroflotation and electrocoagulation. There are articles devoted to communication engineering, energy management in microgrids and potential assessment of wind energy in conditions of Ethiopia. The volume will be helpful to specialists in machinery, communication and construction, environmental protection and energetics.
- Published
- 2023
46. 10th Manufacturing Engineering Society International Conference (MESIC)
- Author
-
Domingo Morales-Palma, Andrés J. Martínez-Donaire, Marcos Borrego Puche, Gabriel Centeno Báez, Carpoforo Vallellano, Domingo Morales-Palma, Andrés J. Martínez-Donaire, Marcos Borrego Puche, Gabriel Centeno Báez, and Carpoforo Vallellano
- Subjects
- Chemical engineering, Chemistry, Engineering, Industrial engineering, Manufactures, Mechanical engineering, Mining engineering, Physics, Science, Technology
- Abstract
Selected peer-reviewed extended articles based on abstracts presented at the 10th Manufacturing Engineering Society International Conference (MESIC 2023)Aggregated Book
- Published
- 2023
47. Structural and Sustainable Materials
- Author
-
Kiang Hwee Tan, Akihiko Fujiwara, Takashige Omatsu, Ari Syahidul Shidiq, Mohamad Ramadan, Abdul Ghani Olabi, Nurul Hilwa Mohd Zini, Kiang Hwee Tan, Akihiko Fujiwara, Takashige Omatsu, Ari Syahidul Shidiq, Mohamad Ramadan, Abdul Ghani Olabi, and Nurul Hilwa Mohd Zini
- Subjects
- Building, Building materials, Chemical engineering, Chemistry, Engineering, Highway engineering, Mechanical engineering, Physics, Railroad engineering, Technology
- Abstract
Special topic volume with invited peer-reviewed papers only
- Published
- 2023
48. International Conference on Future Technologies in Manufacturing, Automation, Design and Energy
- Author
-
A. Johnney Mertens, S. Somasundaram, A. Johnney Mertens, and S. Somasundaram
- Subjects
- Building, Building materials, Chemical engineering, Chemistry, Engineering, Highway engineering, Industrial engineering, Mechanical engineering, Physics, Railroad engineering, Technology
- Abstract
Selected peer-reviewed full text papers from the 3rd International Conference on Future Technologies in Manufacturing, Automation, Design and Energy (ICOFT MADE 2022)
- Published
- 2023
49. 10th Manufacturing Engineering Society International Conference (MESIC 2023)
- Author
-
Domingo Morales-Palma, Andrés J. Martínez-Donaire, Marcos Borrego Puche, Gabriel Centeno Báez, Carpoforo Vallellano, Domingo Morales-Palma, Andrés J. Martínez-Donaire, Marcos Borrego Puche, Gabriel Centeno Báez, and Carpoforo Vallellano
- Subjects
- Chemical engineering, Chemistry, Engineering, Industrial engineering, Manufactures, Mechanical engineering, Mining engineering, Physics, Science, Technology
- Abstract
Selected peer-reviewed full text papers from the 10th Manufacturing Engineering Society International Conference (MESIC 2023)Selected peer-reviewed full text papers from the 10th Manufacturing Engineering Society International Conference (MESIC 2023), June 28-30, 2023, Sevilla, Spain
- Published
- 2023
50. HÜTTE Band 3: Elektro- und informationstechnische Grundlagen für Ingenieure
- Author
-
Manfred Hennecke, Birgit Skrotzki, Manfred Hennecke, and Birgit Skrotzki
- Subjects
- Mechanical engineering, Electrical engineering, Engineering mathematics, Engineering—Data processing, Bioengineering
- Abstract
Das Standardwerk HÜTTE erscheint in der 35., aktualisierten Auflage in der Reihe Springer Reference Technik. Diese Reihe bietet allen Ingenieurinnen und Ingenieuren – ob im Studium oder in allen Formen des Berufslebens – zielführendes Fachwissen in aktueller, kompakter und verständlicher Form. Die HÜTTE enthält in drei Bänden die Grundlagen des Ingenieurwissens sowie ökonomisch-gesellschaftliche Kapitel, die das Ingenieurwissen ergänzen. Band 3 umfasst Elektro- und informationstechnische Grundlagen: Elektrotechnik Messtechnik Regelungs- und Steuerungstechnik Informatik InformationsmanagementBand 1 Mathematisch-naturwissenschaftliche und allgemeine GrundlagenBand 2 Grundlagen des Maschinenbaus und ergänzende Fächer
- Published
- 2023
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.