Search

Purpose: Teaching sustainable development at the higher education level requires that existing curricula are supplemented with multi-disciplinary (and sometimes multi-national) collaboration and integrated thinking. The purpose of this paper is to increase the understanding of a particular framework for business model innovation for sustainability-as-flourishing that is used as a boundary object in the context of interdisciplinary, peer-assessed distance learning. This study is positioned in the broader picture of enlarging curricular content so as to reflect the systemic and interconnected nature of socio-technical and economic developments. The motivation behind this study is the authors' wish to achieve a deeper understanding of how students engage with the complex concept of sustainable business modelling, while using the flourishing business canvas (FBC). Design/methodology/approach: An experiment was conducted on the use of the FBC as a boundary object among 52 engineering students at two universities. Data were provided by the following: iterations of the FBC; oral and written peer feedback; and an online survey. Findings: Based on an evaluation of the experiment, this study shows that the FBC supports the use of multi-disciplinary, multi-national peer and distance learning in sustainability education. Research limitations/implications: This study used one test condition of multi-disciplinary, multi-national collaboration for peer and distance learning at one point in time. Additional tests, using the tools and approaches of this study, are needed. Originality/value: Various tools and methods for use in education have been developed that support a new view of sustainability--sustainability-as-flourishing. Extant research focusses primarily on the development of tools and methods in this area. Not enough attention has been paid to the analysis of their implementation and use in higher education. This paper seeks to fill that research gap.

As more entrepreneurial experiences are integrated into engineering programs, students are faced with new challenges they need help in managing. While previous research has identified entrepreneurial activities that engineering students struggle with, the antecedents of these difficulties have not been directly investigated. Drawing on an ethnographic study in a project-based entrepreneurship course, this paper investigates difficulties as caused by both "cognitive conflicts" and "cultural clashes." The findings suggest that difficulties with entrepreneurial activities do not necessarily stem from lack of entrepreneurial capabilities on behalf of students, they can just as well stem from legitimate conflicts of interest that students and teachers need to navigate. As such, difficulties cannot always be solved by students learning more about entrepreneurship. As shown in the study, collaborative and externally oriented learning activities -- mainstays of project-based entrepreneurship courses -- particularly contribute to putting competing social demands on students.

This paper elaborates on a number of key criticisms of Mezirow's transformative learning theory as well as providing arguments that validate it. Our paper exemplifies how Mezirow's theory can help adult educators and prospective school teachers understand that social structures and belief systems can influence student learning, that learners make meaning of their experiences in various ways which influence the sort of value systems they develop and that disorienting dilemmas often challenge the validity of one's values and the assumptions that underpin them. It exemplifies how Mezirow's theory can be put into practice in Adult and Higher Education via three case studies undertaken by the authors in different places, at different times and with different sets of learners. These include mature aged women returning to study, PhDs at a Swedish Engineering University, and domestic and international students studying at an Australian regional university. The case studies make use of a values survey, interviews and subsequent focus groups. Data from the survey and interviews are analysed and used to argue that transformative learning (Mezirow, 1991) can be practiced, to good effect, in university staff development and teacher education courses.

Purpose: The Mechanical Engineering course at the University of Campinas is composed of different disciplines in the areas of materials, mechanical design, manufacturing (production and manufacturing), computational systems, thermal and fluids. In the manufacturing area, in particular, there is a discipline entitled Productive Systems whose main objective is to offer to the student a global vision about operations management. In the field of operations management, sustainability is gaining more and more importance; thus, it is important to develop in the students a critical sense about social and environmental aspects. Thus, this paper aims to present the main initiatives developed in the discipline to promote sustainability in engineering students. Design/methodology/approach: Since 2015, the professors responsible for the Productive Systems discipline, assisted by post-graduate students and professors from other universities, have begun to redesign the discipline, including debates, lectures, projects and other initiatives to provide a critical view concerning the traditional concepts taught. The discipline has been performed three times with this new conception. The methodology to structure this research was literature review, documental analyses of the discipline records and meetings with professors that participated in the initiatives. An Action Research approach was performed by two professors and a graduate student. The authors of this paper also compared the results with those obtained by initiatives performed at Chalmers University of Technology (Sweden). Findings: This study allowed to reinforce some results from initiatives performed at Chalmers University of Technology (Sweden); however, some differences were identified. For example, similar to the initiatives mentioned, the professors of University of Campinas had problems with didactic books, as they loosely integrate the basic operations management concepts with sustainable development fundamentals. On the other hand, debates related to social sustainability were considered positive from the point of view of the professors and students, differing from initiatives performed at Chalmers University of Technology. Research limitations/implications: Results come from one field study (University of Campinas) when professors of the Mechanical Engineering course try to integrate operations management concepts and sustainable development. Different results may be observed by other higher education institutions. Practical implications: The authors of this paper believe that the diffusion of these initiatives can stimulate other professors and researchers in the field to broaden the academic debate about the insertion of sustainability into engineering courses. Originality/value: There are few papers presenting didactic experiences and empirical results about the integration of operations management concepts and sustainable development. Results of this paper reinforce some good practices and they also present other ones, in a way that extend the debate about educational engineering.

Classifications of higher education institutions into categories that are more or less clearly differentiated through prestige and status are legion in the world of higher education. The notion of parallel categories with comparable statuses, such as those of different types of universities, is however much less well understood. This paper investigates how universities navigate between such alternative categories. We examine boundary work and institutional change involving Swedish higher education institutions with significant activity in engineering sciences in order to analyse how actors relate to ideas regarding the category 'technical university' as an ideal potentially distinct from that of the broad, comprehensive university. Analysis of two cases in the second half of the twentieth century shows that for engineering faculty, a focused technical university was an attractive alternative to the institutional model of the broad university. In contrast, analysis of two twenty-first-century cases suggests that aspirations to be recognised as a technical university were largely driven by adaption to external stakeholders' interests. We discuss these findings in light of the emergence of the global hegemonic category 'research university'. We also suggest that the organisational identity of a HEI may be tied to ideas about an organisational category through imprinting and path dependency. Moreover, we propose that changes over time in how categories are perceived may serve as an impetus to organisational change.

Students engaged in systems engineering education typically lack experience and understanding of the multidisciplinary complexity of systems engineering projects. Consequently, students struggle to understand the value, rationale, and usefulness of established systems engineering methods, often perceiving them as banal or trivial. The paper presents a learning activity based on a three-stage reverse engineering role-play developed to increase students' awareness of the importance of correctly using systems engineering methods. The activity was developed and integrated in the Systems Engineering course given at Blekinge Institute of Technology. Its effectiveness was analyzed through semistructured self-reflection reports along with two editions of the course. The results showed the development of students' understanding of how to use systems engineering methods. In particular, the students realized the need to deliver detailed and easy-to-read models to the decision makers. This result was in line with the achievement of some of the intended learning outcomes of the course.

Global software engineering education (GSEE) is aimed at providing software engineering (SE) students with knowledge, skills, and understanding of working in globally distributed arrangements so they can be prepared for the global SE (GSE) paradigm. It is important to understand the challenges involved in GSEE for improving the quality and experience of educators and students. This paper reports the findings of an empirical study on the socio-cultural aspects of GSEE. A case study was conducted involving 14 participants from ten different universities in eight countries. The data was analyzed using grounded theory's open coding procedure. The key contributions of this paper are the identification and description of seven dimensions of socio-cultural distance that caused several significant challenges in the courses: 1) language differences; 2) concept of time; 3) attitude toward grades; 4) assumptions about national culture; 5) differences in autonomy; 6) influence of the course lecturer; and 7) work habits. Recommendations from this paper that are expected to benefit GSEE educators and students include: cross-cultural orientation of students prior to the course; use of various strategies to support better comprehension of different English accents (e.g., speaking slowly, replaying recorded video messages, and text chatting); and educators familiarizing themselves and their students with the relevant GSE and GSEE literature.

Purpose: The purpose of this paper is to present and develop models of educational approaches to entrepreneurship that can provide complementary analytical structures to better study, enact and reflect upon the role of entrepreneurship in higher education. Design/methodology/approach A general framework for entrepreneurship education is developed by using theory as well as practical experiences from the fields of business, engineering and pedagogy. The paper is mainly conceptual where the unfolding Swedish practice is used as contextual backdrop. Findings: The FOR/IN/THROUGH/ABOUT (FITA) taxonomy is presented and used to develop three models of how to approach entrepreneurship in higher education depending on purpose. As there exists a didactical divide between entrepreneurial education for business and entrepreneurial approach to teaching and learning, educators and researchers ought to let their specific context influence the adoption of the taxonomy as well as the presented models. Research limitations/implications: The differentiations suggested by the presented models can be used to both structure the designs and limit claims of future research. More heuristic research is called for. Practical implications: The use of FITA in the designing of entrepreneurship education offers new opportunities for enhancing complementary student learning in higher education. Social implications: The study suggests that any political or scholarly initiative must acknowledge the diversity of entrepreneurship education and chose different approaches depending on what is to be achieved. Originality/value: The multidisciplinary approach has made it possible to present and create models that denote a common ground for a productive discussion on how to better understand and make use of entrepreneurship in higher education.

In this paper, we propose a method to analyse the coherence of existing curricula at higher education institution. We focus our attention to engineering programmes at universities but the proposed method is by no means restricted to those cases. In contrast to other known methods, our approach is quantitative, decentralised, and asynchronous and allows to analyse entire programmes (in contrast to single courses) and does not depend on using specific teaching methods or tools. We propose to perform this quantitative assessment in two steps: first, representing the university programme as an opportune graph with courses and concepts as nodes and connections between courses and concepts as edges; second, analysing the structure of the programme using methods from graph theory. We thus perform two investigations, both leveraging a practical case -- data collected from three engineering programmes at two Swedish universities: (1) how to represent university programmes in terms of graphs (here called concepts-courses graph (CCG)); and (2) how to reinterpret the most classical graph-theoretical node centrality indexes and connectivity and network flow results in order to analyse the programme structure, including to discover flows and mismatches.

Purpose: This study has a scope limited to a specific course and changes integrated to the core of the KTH naval architecture master program. The students in the program have earlier experience from engineering applications in a general sustainability perspective and understand the basic concepts within sustainability. Therefore, to introduce further steps a new course module was introduced in 2018 focusing on safety management and social sustainability. The purpose of this study is to identify and document the pedagogic lessons for a course module where sustainable development (SD) is discipline-specific. Design/methodology/approach: This study is a case study that qualitatively investigates the stainability effects of the implementation of the new course module. The course and program activities are compared to the results of a previous study in 2017 on the sustainable development learning elements (SDLEs) in the program and discussed in relation to more general SD initiatives. Findings: From the analysis, it is identified that the perspectives presented were new to a substantial part of the students. This study also shows that the effects of the specific module here studied, with a focus on the skill of maritime social sustainability development, differ from more general sustainability literacy. The new perspective affected the thinking about the core of the students' studies, ship design, in a way that general knowledge on sustainability has not. This was achieved with a combination of suitable tools and perspectives in combination with contextual knowledge and a frame of reference. The contextual knowledge and a frame of reference are here present in education as a result of relating the sustainability case to the core of the program. Originality/value: The result relates the pedagogical change described to SDLEs and to the ambition of conceive, design, implement and operate approaches. This paper contributes to the literature by providing a discussion on how social sustainability can be implemented in engineering education and the role of integrated discipline-specific sustainability modules.

Educational collaboration activities are generally under-researched part of the interactive learning between universities and industry. The study based on 529 Master of Science (MSc) theses from a major Swedish engineering school, the faculty of engineering LTH at Lund University, shows that MSc theses are a frequently used collaboration mechanism between university and industry in engineering education. Collaborating firms benefit mainly by recruiting students and the transfer of technological knowledge. Moreover, mainly regional large firms benefit from the educational collaboration and firms collaborate mostly on knowledge related to product innovations and in the early stages of the product innovation process. Small and medium-sized enterprises (SMEs) tend to relate to newer engineering disciplines, have relatively more MSc thesis projects related to product innovations and later process stages, specifically in prototype development and testing, than large firms have. The paper suggests a number of university actions to increase knowledge spillover to SMEs.

Connections to research and professional practice are both essential components of engineering education, although handled differently across engineering programmes. The aim of this paper is to identify discourses on these components across three engineering programmes to in depth understand these variations. A discourse analysis was conducted on interviews, documents and observations and the results show three distinct discourses: the relevance and usefulness discourse, primarily emphasising engineering professional practice and connections to industry; the research and independence discourse, primarily accentuating research connections and independence from external actors; and the dual coupling and sustainability discourse, mainly highlighting a combination of connections to research and professional practice, along with a focus on sustainable development. The overall function of the discourses is interpreted as enhancing the particular characteristics of each programme and resisting different types of influences that threaten to undermine the characteristics of each programme.

In recent years, there has been increasing interest within the engineering education research community to prepare engineering students to address wicked problems (WPs) such as climate change, resource scarcity and violent conflict. Previous research suggests that engineering students are able to address WPs if they are given adequate support, but there is a lack of research on what kinds of support are needed. This paper aims to reduce this gap by reporting on students' performance in, and approaches to, addressing WPs when different scaffolding strategies were used in different parts of a rubric-based intervention. The intervention aimed to provide undergraduate engineering students with an understanding of the nature of WPs and with a structured way of addressing them. For each part of the intervention, we discuss affordances for learning provided by the different scaffolding strategies. The results suggest that strong cognitive scaffolding can support students' understanding of the nature of WPs and students' performance in written responses to WPs, but possibly also limits deep engagement with WPs and transfer of learning to other contexts.

It is widely argued that engineering education needs to change in order to attract new groups of students and provide students with knowledge appropriate for the future society. In this paper we, therefore, investigate and analyse Swedish universities' websites, focusing on what characteristics are brought to the fore as important for tomorrow's engineers. The data consist of text and pictures/photos from nine different Engineering Mechanics programme websites. Using a critical discourse analysis approach, we identify three societal discourses concerning 'technological progression', 'sustainability', and 'neoliberal ideals', evident in the websites. These discourses make certain engineering identities possible, that we have labelled: traditional, contemporary, responsible, and self-made engineer. Our analysis shows that universities' efforts to diversify students' participation in engineering education simultaneously reveal stereotypical norms concerning gender and age. We also argue that strong neoliberal notions about the self-made engineer can derail awareness of a gendered, classed, and racialized society.

Previous research shows that many students find it difficult to learn computer programming. To learn computer programming includes both gaining theoretical understanding and learning to develop programmes in practice. To this end, teachers commonly design programming exercises for the students in the computer laboratory. To be able to improve the process of designing such exercises, there is a need of a more detailed understanding of the interaction between learning of theory and learning of practice in laboratory sessions. In this paper, an approach for investigating this interaction is proposed. Theoretically, the approach is based on phenomenography and variation theory. To illustrate the approach, it is demonstrated in detail how it was applied to a small but rich case of empirical data from a computer laboratory session. The main result presented here is the new approach for analysing data. In addition, the results of the case study shed preliminary light on the interaction between learning of practice and learning of theory when students work with programming assignments in the laboratory.

Academic achievement is regarded an indicator of the success of individuals, schools, universities and countries. 'Success' is typically measured using performance indicators such as test results, completion rates and other objective measures. By contrast, in this article we explore students' subjective understandings and constructions of success, and discourses about 'successful' students in higher education contexts that are renowned for being demanding and pressured. We draw on data from 87 semi-structured interviews with students and staff on law, medicine and engineering physics programmes in a prestigious university in Sweden. We focus particularly upon academic expectations, effort levels, and programme structures and cultures. Achieving top grades while undertaking a range of extracurricular activities was valorised in all contexts. Top grades were especially impressive if they were attained without much effort (especially in engineering physics) or stress (especially in law and medicine); we introduce a new concept of 'stress-less achievement' in relation to the latter. Furthermore, being sociable as well as a high academic achiever signified living a 'good life' and, in law and medicine, professional competence. We discuss the implications of the dominant constructions of success, concluding that (upper) middle-class men are most likely to be read as 'successful students', especially in engineering physics.

Purpose: Employability includes the ability to find employment and remain employed. Employability includes both hard and soft skills, including formal and actual competence, interpersonal skills, and personal characteristics. This paper aims to focus on illuminating perceptions engineering graduates have regarding employability. More specifically, the aim is to explore how engineering graduates perceive, invest in, manage, and develop their employability. Design/methodology/approach: The study highlighted in the paper draws on a longitudinal qualitative study and the empirical data include recurrent interviews with 20 recent graduates from Master's level engineering programs in information technology. Findings: The results of the paper indicate that hard formal and technical vocational skills are considered to be of declining importance. Generally, these skills are considered less important in relation to one's individual employability compared to different forms of soft skills and personal attributes. The meaning of employability is typically viewed relationally and contextually and is associated with the specific place in which one works. The responsibility for managing and developing one's employability lies with each individual. Practical implications: The results have practical implications for higher education and engineering curriculum design related to the enhancement of graduate employability. Originality/value: The results of the paper indicate that engineering graduates have educational expectations that are not entirely consistent with current university practices. The study respondents indicated that the educational program should focus less on the substantive content of the engineering curriculum, and instead focus more on generalist competence and soft employability skills, including interpersonal skills.

There is growing recognition of the significance of learning within debates about sustainable development. Within the field of environmental education research, however, there has been insufficient attention given to questions of learners and learning. In the light of this situation, this paper reports findings from two studies (one in England, the other in Sweden) that focused specifically on learners' experiences of and responses to environmental curricula in secondary school and higher education. Three kinds of learning challenges that can be experienced by students on environmental education courses are outlined and discussed. The main purpose of the paper is to highlight the complexity of the learning experience within environmental education and to draw attention to the need for improved research-based understandings of environmental learning processes. (Contains 1 figure.)

Chalmers University of Technology is actively promoting learning for sustainable development in its educational programmes. A compulsory part of the bachelor curricula is five full-time weeks of studies on environment and sustainable development. This paper presents an inventory of the contents in these courses performed as a series of discussions with the course leaders. The discussions serve as an important part of a course and programme development effort. Important outcomes from the inventory related to, for example, breadth and depth of content in the courses, the position of the courses in the curriculum, and needs expressed by teachers are discussed. The paper also presents a discussion on the method used and on experiences of how studies of this type can be used to promote learning for sustainable development at the university. (Contains 2 figures and 1 table.)

In this paper, we summarize our experiences from teaching a course in humanoid robotics at Chalmers University of Technology in Goteborg, Sweden. We describe the robotic platform used in the course and we propose the use of a custom-built robot consisting of standard electronic and mechanical components. In our experience, by using standard components, the students obtain a deeper understanding of robotics hardware than would be possible with the use of (some) commercially available robot kits such as e.g. Boe-Bot or Lego Mindstorms. Furthermore, we propose a division between time spent on teaching the theoretical background and time spent on robot assembly and programming, which, in our view, provides the optimal balance between theory and practical work. Summarizing briefly, for a seven-week course, we propose two weeks of theoretical background lectures, followed by five weeks of practical work, in which each practical session starts with a brief theory demonstration. (Contains 1 table and 2 figures.)

This paper presents a study that seeks to examine the messages conveyed in one of the initiatives that have been initialized in order to make young people interested in pursuing engineering studies at technological universities. The study is a case study of the web-based advertising (recruitment) campaign KTH from the Inside designed for KTH Royal Institute of Technology. The analysis draws on a theoretical framework from governmentality studies. The analysis of the campaign conclude that the ideal engineering constructed in the campaign is one of an individual who meets the requirements asked of a lifelong learner with cosmopolitan aspirations. This is an ideal that builds on a notion of progress associated with social progress and sustainability. This is a break with historical and cultural patterns, which symbolically have linked technology to capitalist profitability and masculinity. Though a break with gender patterns is suggested the ideal subject constructed in the campaign is almost exclusively based on the students on Masters' level. This excludes students at Bachelor programmes. This I argue is problematic as it narrows the recruitment of students to technological universities to a small group of students.

This paper investigates the emergence of an engineering education research (EER) community in three Nordic countries: Denmark, Finland and Sweden. First, an overview of the current state of Nordic EER authorship is produced through statistics on international publication. Then, the history of EER and its precursor activities is described in three national narratives. These national storylines are tied together in a description of recent networking activities, aiming to strengthen the EER communities on the Nordic level. Taking these three perspectives together, and drawing on concepts from community of practice theory, network theory and learning network theory, we discuss factors behind the differences in the countries, and draw some conclusions about implications for networking activities in a heterogeneous community. Further, we discuss the role of networks for affording a joint identity.

An increasingly desired outcome of engineering education is the ability to engage in self-regulated learning (SRL). One promising method for the formative assessment of SRL is the reflective diary. There is, however, a paucity of research on the use of reflective diaries in engineering education. To mitigate this gap, we report on a case study where reflective diaries were implemented in a master's course on tissue engineering. The objective of this paper is to explore the potential of reflective diaries for the formative assessment of three central aspects of SRL: conceptions of knowledge, conceptions of learning, and strategies for monitoring and regulating learning. Based on a theoretical thematic analysis of the diary entries, we show that reflective diaries can be used to assess these three aspects of SRL. We discuss ways of providing feedback to students, with a focus on dialogic feedback.

One challenge for an optimal design of the mathematical components in engineering education curricula is to understand how the procedural and conceptual dimensions of mathematical work can be matched with different demands and contexts from the education and practice of engineers. The focus in this paper is on how engineering students respond to the conceptual-procedural distinction, comparing performance and confidence between second and fourth year groups of students in their answers to a questionnaire comprising conceptually and procedurally focused mathematics problems. We also compare these students' conceptions on the role of conceptual and procedural mathematics problems within and outside their mathematics studies. Our data suggest that when mathematical knowledge is being recontextualised to engineering subjects or engineering design, a conceptual approach to mathematics is more essential than a procedural approach; working within the mathematical domain, however, the procedural aspects of mathematics are as essential as the conceptual aspects.

The purpose of this paper is to identify faculty perspectives on the integration of work-related issues in engineering education. A mixed methods approach was used to explore faculty attitudes towards work-related learning, to describe activities related to working life that have been introduced into the curriculum and to identify factors that faculty see as important if the amount of work-related learning is to increase. The results show that faculty members are positive about integrating work-related issues into the curriculum. Programmes with more extensive connections to industry offer more integrated activities, such as projects with external actors, and use professional contacts established through research in their teaching. In order to increase work-related learning in engineering curricula, faculty request clear goals and pedagogical tools. Other options to increase work-related learning include offering faculty the opportunity to work outside academia.

The research interest underpinning this paper concerns the type of mathematical knowledge engineering students may acquire during their specialised education in terms of the conceptual and procedural dimensions of doing and using mathematics. This study draws on interviews with 25 qualified engineers from South Africa and Sweden regarding their views on the role of mathematics in engineering education, with special focus on the conceptual and procedural aspects of mathematical knowledge. A thematic analysis of the interview data led to the identification of two main themes. According to the conceptual view a predominantly conceptual approach is needed and valued more than procedural skills, while the balanced view emphasises a balance of conceptual understanding and procedural fluency as well as links between them. It is suggested that the mathematical education of engineers would need to be more conceptually oriented to prepare for the demands at the workplace.

In this paper, we report a teaching experiment regarding the theory of polynomial approximations at the university mathematics teaching in Sweden. The experiment was designed by applying Variation theory and by using the free dynamic mathematics software GeoGebra. The aim of this study was to investigate if the technology-assisted teaching of Taylor polynomials compared with traditional way of work at the university level can support the teaching and learning of mathematical concepts and ideas. An engineering student group (n = 19) was taught Taylor polynomials with the assistance of GeoGebra while a control group (n = 18) was taught in a traditional way. The data were gathered by video recording of the lectures, by doing a post-test concerning Taylor polynomials in both groups and by giving one question regarding Taylor polynomials at the final exam for the course in Real Analysis in one variable. In the analysis of the lectures, we found Variation theory combined with GeoGebra to be a potentially powerful tool for revealing some critical aspects of Taylor Polynomials. Furthermore, the research results indicated that applying Variation theory, when planning the technology-assisted teaching, supported and enriched students' learning opportunities in the study group compared with the control group.

The concept of perspectives is important in discussions about the multidimensionality of sustainability problems and the need to consider many different aspects when dealing with them. This paper aims to facilitate discussions among both educators and researchers about didactical approaches to developing students' abilities to deal with the multidimensionality of sustainability challenges through the use of multiple perspectives. For this purpose, a theoretical framework was developed that describes perspectives in terms of a set of general characteristics, as well as a number of ways in which students can develop and reflect on perspectives. Development of the framework was supported by a qualitative content analysis of transcripts from interviews with undergraduate engineering students in Sweden.

This study forms part of a collaboration project between universities in South Africa and Sweden in which we investigate whether the emphasis in undergraduate mathematics courses for engineering students would benefit from being more conceptually oriented than a traditional more procedurally oriented way of teaching. In this paper, we report in some detail from two interviews with professional engineers, selected to represent two different "poles" of engineering work. The aim was to explore different kinds of arguments regarding the role of mathematics in engineering work, as well as some common across contexts. Both interviewees feel that conceptual mathematics is more important for engineering work, although the role of the procedural aspect was seen by one of the interviewees also to be important, but in a very intricate way.

In this paper, we investigate the perception of academics regarding how their experiences from societal interaction (third mission) inform their teaching and vice versa. We report on a phone survey of Swedish academics in three engineering-related disciplines. The findings show that there is a perceived positive and bidirectional relationship between societal interaction and teaching. Industry-related activities were perceived to inform teaching more than other types of societal interaction. While societal interaction is at large more important for the academics in their search for relevant teaching topics and content, teaching was deemed more important for the implementation of societal interaction. We conclude by proposing that academics creatively (re)combine experiences from third mission and education, often mediated by their research activities.

The phenomenon of women's underrepresentation in engineering is well known. However, the slow progress in achieving better gender equality here compared with other domains has accentuated the "numbers" issue, while the quality aspects have been largely ignored. This study aims to shed light on both these aspects via the lens of mentors, who are at the coalface of guiding female engineers through their education and subsequent careers. Based on data collected from 25 mentors (8 men and 17 women from 8 countries), the paper explores their experiences of being mentors, as well as their views on recommended actions for nurturing female engineers. The findings reveal that the primary motivation for becoming a mentor was personal for men and women. Many mentors from countries with relatively lower female labour participation rates perceive their roles as guarantors of their mentees' successful future career paths, and a similar trend can be found in mentors in academia. The study underscores the need for invigorating mentors' roles in order to secure a more equitable future for engineering education.

In educational research, it is well-known that collaborative work on core conceptual issues in physics leads to significant improvements in students' conceptual understanding. In this paper, we explore collaborative learning in action, adding to previous research in engineering education with a specific focus on the students' use of free body diagrams in interaction. By looking at details in interaction among a group of three engineering students, we illustrate how they collectively construct a free body diagram together when learning introductory mechanics. In doing so, we have focused on both learning possibilities and the dynamic processes that take place in the learning activity. These findings have a number of implications for educational practice.

Teaching larger software engineering project courses at the end of a computing curriculum is a way for students to learn some aspects of real-world jobs in industry. Such courses, often referred to as capstone courses, are effective for learning how to apply the skills they have acquired in, for example, design, test, and configuration management. However, these courses are typically performed in small teams, giving only a limited realistic perspective of problems faced when working in real companies. This paper describes an alternative approach to classic capstone projects, with the aim of being more realistic from an organizational, process, and communication perspective. This methodology, called the company approach, is described by intended learning outcomes, teaching/learning activities, and assessment tasks. The approach is implemented and evaluated in a larger Master's student course. (Contains 2 figures and 2 tables.)

This article explores how four male vehicle engineering students at an upper secondary school in Sweden engage in literature discussion. The study combines a Conversation Analysis (CA) approach with a reception theory perspective and shows that the boys use direct reported speech (DRS) in their interaction as a technique to handle intimate and personal dimensions in the text, but also to construct themselves as skilled readers. Approaching the empirical data in this way makes it possible to go beyond the stereotyped images of (working class) boys presented in so many research papers and provide a more nuanced picture of boys' reception pattern in a school context.

Purpose: The aim of this study is to contribute to the quality improvement and long-term strategic development of education for sustainable development (ESD) in engineering education curricula. Design/methodology/approach: The content in 70 courses in environment and SD were characterized and quantified using course document text analysis. Additionally, two questionnaires were sent to students and alumni at Chalmers, and interviews and focus group discussions were conducted with representatives from 16 Swedish companies and five organizations. Findings: It was found that industry demands a broader range of competences in SD amongst engineers in general than what is currently provided. In total, 35 per cent of alumni claim they encounter sustainability issues from sometimes to daily in their work. However, only half of them believe they possess enough competences to make decisions from a sustainability perspective. Quantity, coverage and the level of integration in the educational programme all appear to be important for the students' perceived competences on SD and for the importance that they put on achieving SD. Originality/value: Earlier research has reported on how to further develop the idea and design of ESD and on competence needs in general. Few attempts have been made to assess industry's needs of competences in SD. This paper sheds light on how engineering universities educate for SD and benchmarks this to industry's needs in an exploratory case study, using Chalmers as an example.

Purpose: The purpose of this paper is to report on methods developed, within a three-year Education for Sustainable Development (ESD) project at Chalmers University of Technology in Gothenburg, Sweden, to achieve a higher degree of embedding of ESD in engineering programmes. The major emphasis is on methods used, results achieved and lessons learned from the work. Design/methodology/approach: The basic idea that methods and activities were built on was that the only way to achieve long-term changes is to increase the motivation and capacity of lecturers and program directors to perform the required changes. Findings: Activities that were developed and tested focused on coaching discussions and on workshops for teachers, gathering teachers from one programme at a time. These activities aimed at starting learning processes in individuals. Special care was taken into keeping the feeling of responsibility and initiative in the faculty members within the programmes. A special "resource group" of experienced ESD teachers was available as support for programme directors and lecturers. Originality/value: The methods reported on are further developments of a method that has been used in Delft University of Technology (the Individual Interaction Method) in the Netherlands. The experiences from Chalmers are discussed in such a way that they provide useful insights for others aiming at similar changes at university.

In the Swedish Act for higher education, as well as in the policies of technical universities, it is stated that sustainable development (SD) should be integrated into engineering education. Researchers argue that SD needs to be integrated into the overall course content rather than added as a specific course. In this paper, six engineering lecturers have been interviewed to give their views on how SD can be integrated into teaching water and sanitation engineers. Engineering lecturers seem unsure how to interpret SD in relation to their own specific courses. Students are said to request technical knowledge rather than fuzzy ideas of SD and lecturers struggle to open up the teaching to more problem-based perspectives. Sanitary professionals in work practice relate to SD as a core in water treatment processes and regret that responsibility for SD issues fall between traditional departmental structures in society.

This paper attempts to critically review theories of learning from the perspective of engineering education in order to align relevant assessment methods with each respective learning theory, considering theoretical aspects and practical observations and reflections. The role of formative assessment, taxonomies, peer learning and educational policy as regards promoting the learning of engineering is discussed. It is suggested that an integrated learning method in which cognitive levels, social factors and teamwork and behaviouristic elements are integrated will optimise the learning process on an engineering course. Moreover, assessment of learning should not be isolated from views of teaching and the learning methods employed by the university teacher. (Contains 1 figure.)

In this paper the authors analyse the design and implementation of a course about learning management systems (LMS). The course was first given in Cuba and then in Guatemala and Peru, within the project USo+I: "Universidad, Sociedad e Innovacion, Mejora de la pertinencia de la educacion en las ingenierias de Latinoamerica" financed by the European Union's ALFA III program. In the course only open educational resources (OER) were used and all course material was stored on USB drives together with the needed software. All programs were executable directly from the memory to meet any problems of limited access to the Internet. Problem based learning was used, with the course divided into two weeks of on campus lectures and workshops followed by distance learning for three months, altogether corresponding to ten weeks of full time studies. The authors propose the term "LiveUSB Mediated Education" (LUME) for a course package, with course material and software contained on the same USB drive. The participants' opinions about the course and their perceptions about LMS and OER were investigated in order to determine the extent to which the LUME method can facilitate cost-effective computer aided education, especially in developing countries. (Contains 6 tables.)

Like many engineering programs in Europe, the final part of most Swedish software engineering programs is a longer project in which the students write a Master's thesis. These projects are often conducted in cooperation between a university and industry, and the students often have two supervisors, one at the university and one in industry. In particular, the Bologna Process that is currently underway to align different higher educational programs in Europe discusses industrial Master's theses as a major type of thesis project. However, there is a lack of knowledge on how best to support these projects and the different stakeholders involved. This paper presents a study where students and supervisors from software engineering Master's thesis projects at three different Swedish universities are interviewed. The intention of the study is to explore what the major problems of different stakeholders are during a project and to investigate what type of support is needed. Based on the interview results, a support model is defined, which outlines the different types of support that are needed for different roles in Master's thesis projects. (Contains 2 figures and 1 table.)

This paper presents experiences and results from a project task in power electronics for students at Chalmers University of Technology, Goteborg, Sweden, based on a flyback test board. The board is used in the course Power Electronic Devices and Applications. In the project task, the students design snubber circuits, improve the control of the output voltage, improve the gate drive of the main MOSFET transistor and study the influence of stray inductance. The project goals (the circuit improvements) are given, but the procedure for solving the problems and obtaining the results is not specified. Instead the students have to make their own specification in order to reach the goals. "Tools" that are given to the students are the hardware, measurement equipment, an example of the circuit in the circuit simulation software PSpice, and lastly lectures covering the material needed in order to attain the project goals. The project design builds on the ideas from the CDIO (Conceive, Design, Implement, Operate) initiative, where students are encouraged to consider the complete process structure. The result found was a substantial engagement by the students, who had both positive and negative reactions. The negative reactions were mainly that the project specification was too vague, in other words in the (C=Conceive)-phase of the CDIO structure. Further, the teachers observed increased learning, which also was noticeable for the students performing their M.Sc. thesis within the power electronics design area. Finally, it was found that a final written exam is definitely still needed to assess students adequately in the course. (Contains 11 figures and 1 table.)

This paper investigates learner response to a novel kind of intonation feedback generated from speech analysis. Instead of displays of pitch curves, our feedback is flashing lights that show how much pitch variation the speaker has produced. The variable used to generate the feedback is the standard deviation of fundamental frequency as measured in semitones. Flat speech causes the system to show yellow lights, while more expressive speech that has used pitch to give focus to any part of an utterance generates green lights. Participants in the study were 14 Chinese students of English at intermediate and advanced levels. A group that received visual feedback was compared with a group that received audio feedback. Pitch variation was measured at four stages: in a baseline oral presentation; for the first and second halves of three hours of training; and finally in the production of a new oral presentation. Both groups increased their pitch variation with training, and the effect lasted after the training had ended. The test group showed a significantly higher increase than the control group, indicating that the feedback is effective. These positive results imply that the feedback could be beneficially used in a system for practicing oral presentations. (Contains 4 figures, 2 tables and 4 notes.)

In this paper, we analyse learning dynamics in the context of physics group work of the kind increasingly found in engineering education. We apply a phenomenographic perspective on learning, seeing the notion of variation as the basic mechanism of learning. Empirically, we base our analysis on data from first year engineering students discussing physics problems concerning force and friction while working in small groups of three or four. The discussions were captured on video and audio, and the subsequent analysis primarily relies on detailed transcriptions and the students' notes. The results illustrate how students relate different parts of the whole learning object (Newtonian mechanics) to one another and create a variation with respect to the parts and/or the whole; how the presence and experience of variation complemented by an experience of relevance may result in identifiable learning; and how tutor interventions may have a favourable impact on the learning dynamics. (Contains 1 figure.)