Search

In order to explore the methods of recycling waste paper, reduce environment pollution, and develop a circular economy, the application of waste corrugated paper to the strengthening of polylactic acid (PLA) was studied. Plant fiber from waste corrugated paper (WCPF) was used to prepare WCPF/PLA composite via co-extrusion. The WCPF was extracted from the waste corrugated paper by beating in a Valli beating machine and grinding in a disc grinder. KH-550 coupling agent was used to modify the surface of WCPF to improve the interface adhesive strength between the WCPF and PLA matrix. The effects of the contents of WCPF and KH-550 coupling agent on the mechanical properties, microstructure, crystallization properties, and thermostability of the WCPF/PLA composite were studied. The results show that the WCPF can be well separated from each other. The WCPF can be uniformly dispersed in the PLA matrix through a co-extrusion process. WCPF can increase the mechanical strength and deformation resistance ability of WCPF/PLA composite, and KH-550 coupling agent can further improve that of the WCPF/PLA composite. This study is of obvious significance to the recycling of waste paper and the development of a circular economy. [ABSTRACT FROM AUTHOR]

Paper-type gas diffusion layer (GDL) plays the role of structural support, mass transport, electron and heat transfer in the fuel cell. The deformation and fracture behavior of paper-type GDL directly determines its physical characteristics. In this paper, we obtained the distribution function of fiber length among intersections using statistical analysis. Based on the bending theory and fracture analysis, the deformation model and the maximum allowable pressure criterion of paper-type GDL are established. The deformation modulus is related to the modulus and the initial volume fraction of carbon fiber, with an ideal value of 1.4 MPa. The tensile fracture is the main form of fiber fracture. The maximum allowable pressure is related to the expected fracture probability, the strength and the initial volume fraction of carbon fiber. The residual strain increases and the deformation modulus decreases with load range, which means that the strength of the paper-type GDL is weakened when residual strain occurs. [Display omitted] • The fiber length between intersections obeys exponential distribution function. • The compression deformation model of paper-type GDL is established. • The maximum allowable pressure criterion for the paper-type GDL is obtained. [ABSTRACT FROM AUTHOR]

A novel, biodegradable substrate based, and cost-effective flexible electrochemical sensor was developed for the highly selective and sensitive detection of one of the major neurotransmitters, dopamine, which can be utilised as a disposable electrode for point-of-care diagnostic applications. The active material CuSnB decorated over cellulose paper exhibits good sensitivities of 3.92 μA μM−1 cm−2 with a limit of detection of 0.5 nM. Moreover, the flexible sensor demonstrated superior selectivity towards co-existing metabolites such as ascorbic acid, glucose, and uric acid, in addition to stability at various mechanical deformations. [ABSTRACT FROM AUTHOR]

The research results and evaluation of the applicability of the original composition of hybrid paper based on silver nanowires (AgNWs), cellulose pulp (CP), and carbon nanotubes (CNTs) are presented and discussed. The material tested was used to manufacture sensors for mechanical deformation resulting from external influences or related to human activity interactions. The sensors were fabricated using an AgNWs + CP suspension and additives by the vacuum filtration method. The substrate obtained was machined and then laminated with a layer of poly(dimethylsiloxane) (PDMS). The recorded responses to selected types of imposed mechanical interactions in the form of changes in the relative resistance of the sensor throughout the tests showed a close cause-and-effect relationship. The response of the tested systems when applying an alternating magnetic field was also observed. The results indicate that the proposed solutions can find application in the monitoring of mechanical interactions resulting from the dynamic behavior of physical objects, as well as derived from selected human vital functions. [ABSTRACT FROM AUTHOR]

Accurately modeling the material behavior of paper and paperboard is proven to be highly demanding. Most difficulties arise from the pronounced anisotropic nature of the material. Additionally, differences in the in‐plane and out‐of‐plane behavior as well as non‐isochoric plasticity, which affects the elastic behavior, further deepen the issue at hand. Therefore, an material model is proposed, capable of capturing the anisotropic elasto‐plastic behavior of paper and paperboard. The constitutive framework was derived in a thermodynamically consistent manner, valid for finite deformations, and accounting for the coupling of in‐plane and out‐of‐plane behavior. The influence of the orthotropic anisotropy on the elasto‐plastic material response was introduced through the concept of structural tensors. A slight generalization of the elastic part of the free energy was made in order to incorporate the densification effect. A well known yield criterion was modified in order to account for some inconsistencies. Non‐isotropic hardening was considered by defining a set of coupled internal variables. The model's capabilities were demonstrated by simulating the process of folding and creasing. [ABSTRACT FROM AUTHOR]

Flexible strain sensors are indispensable components providing repeatable electronic signals responding to mechanical deformations. Nevertheless, there is a stringent demand for flexible sensors to maintain normal performance in daily use and even in harsh conditions, such as high humidity and high temperature. Herein, inspired by scorpions, a highly sensitive flexible strain sensor based on ceramic fiber paper (CFP) with superhydrophobic and high‐temperature‐resistant properties is developed by a combination of mechanical cutting and spray coating method, which minimizes performance degradation commonly seen in polymer‐based and textile‐based sensors under harsh conditions. The prepared strain sensor exhibits high sensitivity (gauge factor ≈1254), low detection limit (0.078%), fast response time (108 ms), and notable stability (over 10 000 cycles). The ultra‐high sensitivity originates from the existence of the micro‐scale cracks. To further improve stability of the device in some harsh conditions, superhydrophobic and heat‐resisting coatings consisting of SiO2 aerogels and SiO2 nanoparticles are introduced onto the surface of CFP. Owing to the synergistic effect of the high‐temperature resistance of ceramics fibers and the coatings, the device operates normally at temperature up to 220 °C with a water contact angle of 159°, showing great promises for harsh conditions, especially in the industrial and aerospace fields. [ABSTRACT FROM AUTHOR]

Cement stabilization is a widely applied technique in improving the workability and geotechnical properties of soft clay. This paper investigated the influence of cement stabilization on the soil–water characteristic curve (SWCC) and the deformation behavior of unsaturated cement–stabilized soft clay. The combined effect of cementation and partial saturation on the hydromechanical behavior of cement-stabilized soils was discussed. The SWCC of stabilized soil was measured in the full suction range under drying and wetting paths using the pressure plate method, the filter paper method, and the vapor equilibrium technique. The deformation behaviors of cement-stabilized soft soil were investigated by conducting suction-controlled oedometer tests. Furthermore, scanning electron microscope micrographs and mercury intrusion porosimetry tests were performed to investigate the effects of cement content on the evolution of soil pore structures. The test results showed that the water retention capacity of the stabilized soft clay increased with increasing cement content. The SWCC showed a significant hysteretic behavior in the boundary effect zone and transition zone, whereas the hysteretic effect was unapparent in the residual zone. The increased cement content had a more significant hysteretic effect on the SWCC. The deformation resistance capacity increased as the cement content and matric suction increased. However, the effect of matric suction on deformation resistance capacity decreased as the cement content increased. With the increase in cement content, the macropores were converted to small interaggregate pores, the pore spaces were distributed more uniformly, and the particle surface became rougher, resulting in higher water retention capacity and significant hysteresis of the SWCC. [ABSTRACT FROM AUTHOR]

Description: A multi-layer wrinkled structure of MWCNTs/polyimide aerogel-based paper was prepared using a simple method. This paper exhibits excellent responsiveness, thermal stability, and mechanical properties, and can detect the movement of mechanical devices through generated responsiveness. [Display omitted] • Multilayer wrinkled structure MWCNTs/polyimide aerogel-based paper (CPs) was prepared via a single freeze-drying-thermal extrusion-thermal imidization method. • CPs can stably generate electrical responses in high-temperature environments up to 300 °C. • CPs exhibit good tensile strength (CP-1: 117.1 MPa at 25 °C) and stability (1000 cycles). • The response generated by CPs can be utilized to monitor changes in the mechanical device. In recent years, as the electronics industry has driven the development of human civilization, flexible responsive materials have become highly favored in sensing applications. However, most flexible materials are not stable under high-temperature conditions, so only a few flexible responsive materials are suitable for high-temperature and high-strength applications. In this paper, multi-walled carbon nanotubes (MWCNTs) were added as conductive material into poly(amic acid) ammonium salt (PAAS) solutions to prepare MWCNTs/polyimide aerogel-based papers (CPs) by a simple method. The introduction of MWCNTs into the ordered multilayer folded structure of the CPs provided a conductive pathway and improved their thermal stability. When the multilayer folded structure was deformed, the MWCNTs between the layers contacted each other, increasing the number of electron transport channels and providing a larger contact area for the conductive network. When the deformation was removed, the MWCNTs in the interlayer contact zone rapidly separated, providing stable and excellent responsiveness at high temperatures (CP-2: ΔR/R 0 value of up to −0.45 at 300 °C) and favorable stability after 1000 cycles (CP-2: RV retention of 92.4 % at 25 °C and 80.5 % at 300 °C). Therefore, the prepared CPs have great application prospects in the fields of high-temperature mechanical device monitoring, sensing, and alarms. [ABSTRACT FROM AUTHOR]

The moisture transport at the fuser nip of printers is postulated to be the main reason for paper curls. However, the fundamental mechanisms of paper curling remain unclear. Observing the moisture transport inside a sheet of paper through experiments is difficult because moisture transport rapidly occurs in a micro-scale thickness. Therefore, developing a theoretical model is crucial to understand the mechanisms of paper curling and to control the curls. In this study, we proposed a multiphysics model that includes the moisture and heat transport and mechanical deformation. The elasticity, plasticity, viscosity, and expansion caused by moisture were considered in the mechanical model to describe the complex material characteristics of paper. The curvature of curls was calculated using an effective two-spring model. The mechanisms of curling in printers and the direction of curls were understood through finite element simulations. The proposed model can qualitatively predict the paper curls observed in experiments. The temperature- and moisture-dependent material properties of paper will be studied in the future to improve the proposed model. [ABSTRACT FROM AUTHOR]

Tissue paper is a thin complex nonlinear fibrous material made from fiber layers thinner (≈100 μm) than a human hair. Though it appears as a slender two‐dimensional material to our eyes, its internal microstructure reveals an intricate architected fibrous network of only 1–5 wood fibers within its thickness. The fiber network is folded in one direction giving rise to a characteristic crepe structure. Using high‐speed imaging, the crepe structure is shown to emerge from a dynamic, coupled mechanical deformation processes of fracture and buckling, occurring on a length scale of few hundred micrometer. Bending and stretching of the folds at the macroscale of the paper and at the microscale of the individual fibers are shown to govern the material's tensile properties, including the strain to rupture and the elastic modulus. Insights from this study can guide the development of strong, soft fibrous materials for biomedical and consumer products. [ABSTRACT FROM AUTHOR]

The electromagnetic wave irradiation has obstructed the precise operation of the high-tech electronic equipment and threatened the health of the bodies during the 5G era. It is critical to develop electromagnetic interference (EMI) shielding materials with remarkable shielding effectiveness along with lightweight and flexible properties, while the integrations of the heat management performances have been gradually indispensable, especially in wearable electronic device applications. Anchoring the Ti 3 C 2 T x MXene nanosheets on the surfaces of the recycled carbon fibers (RCF) and assembling heterostructure can be regarded as effective strategies, while simultaneously solving the conductivity reduction and the corresponding performance degradation bottlenecks of the thermal-recycling carbon fiber. The construction of the RCF-MXene paper performs remarkable EMI shielding performance of 45.7 dB, while the specific SE/t can be improved to 7723.85 dB cm2 g-1, along with impressive photothermal and electrothermal conversion abilities. After coating PDMS layers, the flexible RCF-MXene@PDMS film maintains stable EMI shielding performance when experiencing in-situ electrothermal conversion and after 10000-cycle mechanical deformation processes. Exhibiting multifunctionality by facile synthesis strategies, the RCF-MXene-based materials provide great potential as next-generation candidates in wearable electronic devices, together with promoting the advancement of the sustainable reuse of the carbon fibers resources. [Display omitted] [ABSTRACT FROM AUTHOR]

The thermal response in paper has been studied by thermography. It was observed that an inhomogeneous deformation pattern arose in the paper samples during tensile testing. In the plastic regime a pattern of warmer streaks could be observed in the samples. On the same samples digital image correlation (DIC) was used to study local strain fields. It was concluded that the heat patterns observed by thermography coincided with the deformation patterns observed by DIC. Because of its fibrous network structure, paper has an inhomogeneous micro-structure, which is called formation. It could be shown that the formation was the cause of the inhomogeneous deformations in paper. Finite element simulations was used to show how papers with different degrees of heterogeneity would deform. Creped papers, where the strain at break has been increased, were analysed. For these paper it was seen that an overlaid compaction of the paper was created during the creping process. During tensile testing this was recovered as the paper network structure was strained. [ABSTRACT FROM AUTHOR]

In this work, we present a methodology to assess wrist pressure during the handwriting process. Using optical coherence tomography, it was possible to determine the deformation suffered by the paper during the handwriting process. A calibration of the deformation suffered by the paper as a function of the pressure exerted by the pen was performed, making it possible to determine several parameters of interest, such as the radius of the pen tip sphere R = 488 ± 2 ¡im, the Poisson coefficient v = 0.30 ± 0.02 and the effective Young's modulus of bond paper 75 g/m2. To this end, we developed a method for determining the Hooke modulus for a spring, with which we built a device for applying a known force to a ballpoint pen during the handwriting process. We also performed the study depending on the type of substrate, with five volunteers trying to copy the same signature on four different types of paper. Using the optical coherence tomography technique, we demonstrate that it is possible to differentiate the authorship of a signature also by the depth of deformation on the paper. The experimental procedure also made it possible to determine the Poisson's coefficient and determine the effective Young's Modulus of the paper. [ABSTRACT FROM AUTHOR]

The state-of-the-art in paper micro-mechanics calls for novel experimental data covering the full-field hygro-expansion of inter-fiber bonds, i.e., the 3D morphological changes and inter-fiber interactions. Therefore, a recently developed full-field single fiber hygro-expansion measurement methodology based on global digital height correlation is extended to orthogonal inter-fiber bonds, to investigate their full-field quasi-3D hygroscopic behavior. A sample holder has been developed which enables the quasi-3D characterization of the initial geometry of individual inter-fiber bonds, including the fiber thickness and width along the length of the fibers as well as the degree of wrap around and contact area of the bond, which are vital for understanding the inter-fiber bond hygro-mechanics. Full-field hygroscopic testing reveals the inter-fiber interactions: (i) the transverse hygro-expansion of each fiber strongly reduces when approaching the bonded area, due to the significantly lower longitudinal hygro-expansion of the other bonded fiber. (ii) The relatively large transverse strain of one fiber stretches the other crossing fiber in its longitudinal direction, thereby significantly contributing to the sheet scale hygro-expansion. (iii) Out-of-plane bending is observed in the bonded region which is driven by the significant difference in transverse and longitudinal hygro-expansion of, respectively, the top and bottom fiber constituting the bond. A bi-layer laminate model is employed to rationalize the bending deformation and an adequate match is found with the experimental data. Under the assumption of zero bending, which represents constrained inter-fiber bonds inside a paper sheet, the model can predict the contribution of the transverse strain in the bonded regions to the sheet-scale hygro-expansion. [ABSTRACT FROM AUTHOR]

Dimensional stability issues may occur in paper sheets when subjected to moisture content variations. Paper is in fact mainly composed of hydrophilic wood fibres that experience significant dimensional changes upon humidity variations. The hygro-expansive deformations at the single fibre level and their effects on the meso-structural fibrous network govern the hygro-mechanical response of paper at the macroscopic, sheet scale. The present contribution aims at offering a relation between theoretical predictions and experimental measurements of the hygro-expansive behaviour of paper. Experimental observations of the hygroscopic and mechanical response at the sheet level have been performed, providing the anisotropic hygro-elastic properties of the material in the in-plane principal directions. To understand the multi-scale nature of the phenomenon, a periodic two dimensional meso-structural model of the fibrous network has been developed. The effective material response is extracted via homogenization. The influence of several meso-scale parameters (hygro-mechanical properties and geometry of fibres, inter-fibre bonds and of the network) on the overall behaviour of the material can be studied; in particular, the in-plane fibre orientation distribution along a preferential direction affects strongly the anisotropy of the macro-scale response. The proposed model has been adopted to represent the effective material response, focusing on the hygro-elastic response only and thus neglecting possible irreversible effects occurring at the different scales. A comparison of the experimental data with the results obtained from the model as a function of the fibre orientation distribution reveals a good accuracy of the prediction, thereby showing its applicability to estimate paper’s hygro-expansive response. [ABSTRACT FROM PUBLISHER]

The article analyses the effects of paper moisture content on energy absorbed during its tensile testing in the range of moisture equilibrium obtained during paper air conditioning at a temperature of 23 °C. To predict changes in breaking energy caused by changes in moisture content, two calculation methods were proposed. The methods were verified on the basis of laboratory tests and calculation results, and their practical usefulness was confirmed. [ABSTRACT FROM AUTHOR]

[Display omitted] • Developing a superhydrophobic, kirigami, stretchable pencil-on-paper device platform. • Simultaneously detecting gas, temperature, electrophysiological signals, and providing treatments via thermal therapy and electrical stimulation. • The gas sensor exhibits a large response to NO 2 gas at elevated temperature from self-heating. • The integrated temperature sensor and electrodes accurately detect temperature and electrophysiological signals. • The thermal therapy and electrical stimulation deliver effective means to battle against inflammation/infection and treat chronic wounds. Wearable electronics with applications in healthcare, human–machine interfaces, and robotics often explore complex manufacturing procedures and are not disposable. Although the use of conductive pencil patterns on cellulose paper provides inexpensive, disposable sensors, they have limited stretchability and are easily affected by variations in the ambient environment. This work presents the combination of pencil-on-paper with the hydrophobic fumed SiO 2 (Hf-SiO 2) coating and stretchable kirigami structures from laser cutting to prepare a superhydrophobic, stretchable pencil-on-paper multifunctional sensing platform. The resulting sensor exhibits a large response to NO 2 gas at elevated temperature from self-heating, which is minimally affected by the variations in the ambient temperature and relative humidity, as well as mechanical deformations such as bending and stretching states. The integrated temperature sensor and electrodes with the sensing platform can accurately detect temperature and electrophysiological signals to alert for adverse thermal effects and cardiopulmonary diseases. The thermal therapy and electrical stimulation provided by the platform can also deliver effective means to battle against inflammation/infection and treat chronic wounds. The superhydrophobic pencil-on-paper multifunctional device platform provides a low-cost, disposable solution to disease diagnostic confirmation and early treatment for personal and population health. [ABSTRACT FROM AUTHOR]

Abstract: Compared to traditional steel metering blades commonly used in paper coating operations, ‘soft-tip’ metering blades have received considerably less attention. The research presented herein concerns computationally detailing the characteristics of deformation and deflection in soft-tipped blades under the influence of coating colour flow. Multiphysics simulations were conducted to assess the interrelationships between deflection, deformation, blade length and material properties. Localised plastic deformation in the soft-tip material may be manipulated by adjusting the material properties and geometries of the tip material alongside variables such as; the free blade length, the speed and the properties of the incoming coating. Design of soft-tip materials with respect to these factors may make it easier to achieve a desired blade tip and hence, coating characteristic. [Copyright &y& Elsevier]

This article describes a new method for evaluation of radial crush strength of paper cores. Based on the theory of multilayered composites, a mathematical model has been developed to calculate the value of destructive force during radial crushing of spirally shaped paper cores whose layers are made of different materials. To start calculations, it is necessary to have geometry parameters of the cores, Young's modulus and SCT of an individual component layers. [ABSTRACT FROM AUTHOR]

A spongy graphene paper with an inside foldable corrugated structure is fabricated by electrothermal reduction of the oxygen-containing groups inside an RGO paper. Reversible macroscopical length contraction of the spongy graphene paper with a strain of 2.4% under 10 V voltage is exhibited, mostly attributed to the deformation of corrugated structures. [ABSTRACT FROM AUTHOR]

Abstract  In this study, a simplified Acoustic Emission (AE) equipment, in essence an AE signal conditioner and a USB (Universal Serial Bus) data acquisition system, is used to study what happens in paper structures during mechanical loading. By the use of such equipment, some parameters that can be extracted are e.g. the stress and strain at onset of AE, the stress and strain at the onset of rapid AE defined as some numerical factor (larger then one) times the initial emission rate, the emission rate at the first stage of loading and the stress and strain at final failure i.e. when the specimen loses its load carrying ability.In this study however, the interest is focused on one particular parameter i.e. the elastic strain energy density W c at onset of AE. This is a parameter with a clear physical meaning and in this study, the correlation between this parameter and a fracture toughness measure, is investigated.The conclusion is that when nine different paper materials (with a large span regarding properties) are considered, there is a correlation (however not linear) between these two parameters. [ABSTRACT FROM AUTHOR]

Evaluates an apparatus developed to measure uniaxial tensile and compressive creep for paper. Measurement of creep deformation; Difference from a traditional tensile creep tester; Advantages of the apparatus.

Abstract A number of problems associated with dimensional stability of paper products have to do with hygroexpansion in response to changes in humidity or moisture content. The main underlying mechanism of hygroexpansion in paper is the effect of the change of fiber cross-sections transferred through fiber bonds. In fact, the transverse expansion of fibers can be an order of magnitude greater than the longitudinal expansion. Addressing such problems using modeling on the microscale is associated with large computational costs since both the bonds and the fibers need to be resolved. We present a method for modeling the hygro or thermal expansion of interconnected fiber networks modeled with beam elements and connected through beam-to-beam contact. Being a line structure, beams can only support pointwise contact, which poses a challenge for modeling the force transfer induced by the deformation of the cross-sections at the contact point. The idea of implementing the stress transfer is to use a concurrent multiscale approach in which the bond level is resolved in detail using the configuration of the fibers and the computed strains are passed over to the beam elements. We verify and prove the applicability of this approach by comparing it with continuum models. We demonstrate the advantage of using this approach in terms of its tremendous saving in time. The use of beam models for modeling the hygro- or thermal expansion of fiber networks enables considering relevant sizes in the problems involving dimensional stability, in particular those associated with embedded inhomogeneities. We will show the applicability of the model by providing insights into published experimental observations on the hygroexpansion properties of paper products. Finally, we will demonstrate that the use of a 2D model to simulate the inter-fiber bonds in a network, not only leads to underestimation of out-of-plane deformations, but also to overestimation of the contribution of the transverse deformation of fibers to the in-plane dimensional change of the network. [ABSTRACT FROM AUTHOR]

In this paper, a three-dimensional anisotropic multi-surface model for the in-plane elastoplastic deformation of paper and paperboard is developed. The model is based on the concept of structural tensors. It employs three different yield functions and parameterised consistency conditions for three different loading scenarios. The evolution of the yield surface with plastic strain is described by multiple hardening variables. Furthermore, the evolution equations are integrated using the unconditionally stable backward Euler method. Also, the internal variables are updated using a particular form of the elastic predictor/plastic corrector algorithm. The constitutive model is calibrated from a set of simple uniaxial tension tests performed in various directions of the material and is validated against loading in other directions. Additionally, the predictive capability as well as the numerical performance of the constitutive model is accessed against an existing non-quadratic plasticity model. Finally, the applicability of the constitutive model is demonstrated by performing a tensile test on a paperboard with a hole. [ABSTRACT FROM AUTHOR]

In this paper, an efficient computational framework for the full-wave design by optimization of complex microwave passive devices, such as antennas, filters, and multiplexers, is described. The framework consists of a computational engine, a 3D object modeler, and a graphical user interface. The computational engine, which is based on a finite element method with curvilinear higher-order tetrahedral elements, is coupled with built-in or external gradient-based optimization procedures. For speed, a model order reduction technique is used and the gradient computation is achieved by perturbation with geometry deformation, processed on the level of the individual mesh nodes. To maximize performance, the framework is targeted to multicore CPU architectures and its extended version can also use multiple GPUs. To illustrate the accuracy and high efficiency of the framework, we provide examples of simulations of a dielectric resonator antenna and full-wave design by optimization of two diplexers involving tens of unknowns, and show that the design can be completed within the duration of a few simulations using industry-standard FEM solvers. The accuracy of the design is confirmed by measurements. [ABSTRACT FROM AUTHOR]

Electrical contact resistance (ECR) at the interface is of significant importance in many fields of science and engineering. Current methods for contact resistance estimation are based on the typical nearly incompressible rough surfaces, which is not suitable for porous material with large deformation in the compression process. The objective of this work is to build an analytical model for ECR between solid material and porous material, for example, which could be used to predict power loss between carbon fiber paper and bipolar plate in the fuel cell. First, mathematical description of solid roughness surface is built by classic Greenwood and Williamson model. Considering the porous structure, carbon fiber paper is modeled by multi-layer construction based on random line network model. Effect of large compression of carbon paper on contact behavior is furtherly given necessary attention in this study. Contact pressure and resistance are calculated based on statistical methods with consideration of multi-deformation states. Then, experiments are carried out to validate the numerical model. The results show good agreements with the numerical model. Finally, influences of carbon paper compression and main parameters are systematically discussed based on the numerical model. The model developed will enhance our understanding regarding the relation between contact pressure and contact resistance at the interface for solid material and fiber-structure material. [ABSTRACT FROM AUTHOR]

Flexible display technology has been successfully commercialized with foldable and rollable displays. Because of the limitation of the flexible technology, stretchable displays have attracted great attention which capable of realizing freeform design as a post‐flexible display. However, no technology has yet provided sufficient stretchability and resolution to realize genuine free‐form displays. We report on a highly deformable AMOLED display which capable of elongation over 20%. Moreover, our display is capable of more than 15% shrinkage deformation. We also developed low‐temperature thermal shrink process to make the most of the potential of the display. The fabricated full‐color stretchable AMOLED shows excellent deformability with high pixel density. [ABSTRACT FROM AUTHOR]

Laminated paperboard and paper is widely used in packaging products. Its out-of-plane properties play a crucial role in converting paperboard to a carton through the creasing and folding process. The aim of this study is to describe the out-of-plane mechanical response with an elastic-plastic model based on the observed experimental behavior. The model was derived from a thermodynamic framework and was based on the multiplicative split of the deformation gradient in the context of hyperelasticity. A structural tensor-based approach was applied to model the elastic deformation, while a multi-surface based yield criterion was adopted to describe the plastic behavior. The model considers both material densification and internal friction effects, which were observed experimentally. According to the experimental behavior, a quadratic yield locus under pure shear loading was assumed in the model. Finally, the model was validated with a cylinder compression test and found to capture the highly anisotropic, elastic-plastic behavior accurately. [ABSTRACT FROM AUTHOR]

Wet cleaning of ancient papers is a common treatment performed for the removal of degradation products, external contaminants and salts, which can promote the degradation of cellulose (i.e., hydrolysis, oxidation). In this research, the effects on the mechanical properties of paper samples caused by wet cleaning treatments were evaluated by considering the changes induced in the ultimate tensile strength, deformation at break and flexibility. For this purpose, samples were subjected to different aqueous cleaning treatments such as immersion in deionised water and the application of rigid gels of agar and gellan gum at different concentrations was carried out. Tensile tests were run, and morphological observations of paper by means of light microscopy and scanning electron microscopy were recorded. Contrary to the significant changes in the mechanical properties of paper samples after immersion treatment (an increase in flexibility as the elongation at break), the use of gelled systems caused slight improvement in the mechanical properties of paper (in both the ultimate tensile strength as well as in the breaking strain). Changes in the mechanical properties of paper were also correlated with slight changes in the diameter of the cellulose fibres as a consequence of the swelling action of water molecules, especially in the case of immersion treatment. Finally, the tensile tests performed on the paper samples after thermo-hygrometric accelerated artificial ageing (70 °C and 65 % RH) demonstrated that cleaning treatments by rigid gels did not seem to accelerate any sort of paper degradation in the mid to long term. [ABSTRACT FROM AUTHOR]

Understanding the effects of water absorption on the geometry of a paper sheet is important for inkjet printing applications, since internal moisture content differences may cause unacceptable out-of-plane deformations. The present work focuses on moisture-induced deformations due to a moisture content that is uniform over the thickness of the sheet. Large enough in-plane differences will cause the sheet to buckle, leading to a wavy pattern at the edges of the sheet. Two approaches are utilized to study this for levels of moisture content up to and including the threshold for buckling. An analytical approach, based on geometrically nonlinear plate theory (von Kármán theory), and a numerical one, using commercially available finite element software, are presented. As a first reference problem an isotropic circular plate, wetted uniformly at its center, is solved both analytically and numerically for the in-plane stress distribution, the buckling threshold, and the resulting buckling mode. Secondly, the same is done for an orthotropic rectangular plate, wetted at its edges. Here, in the analytical approach a Rayleigh–Ritz analysis is employed to approximate the buckling threshold. The latter is also calculated by numerical means. The results show that the methods provide results consistent with each other. [ABSTRACT FROM AUTHOR]

This document is a summary of a special issue of the International Journal of Mining, Reclamation & Environment focused on innovative mine backfill materials and structures. The issue includes fourteen research papers that discuss various aspects of backfill mining, such as stability, hydration characteristics, mechanical features, and curing effects. The papers cover topics such as predicting heavy metal occurrence forms in tailings, using steel slag in backfill materials, assessing the effects of backfill ingredients on mechanical features, and developing simulation models to predict fill strength. Other papers explore the impact of curing humidity on backfill deformation and mechanical characteristics, the spatial evolution of fracture toughness under external sulphate attack, the behavior of fibre-reinforced backfill specimens under different strain rates, and the ideal Poisson's ratio for grainy backfill products. The issue also includes papers on the stress features of backfill materials at different temperatures, inclinometer state analysis for field observation, the characterization of filling effects in coal mines, mixing features of waste rocks in backfill, and the use of microgrid fibres as a reinforcement in cemented rock fills. The author expresses appreciation to the authors, referees, and editors involved in the special issue and hopes that it will contribute to the advancement of advanced fill products and methods in mining. [Extracted from the article]

The mechanical response of three different structural core sandwich panels in out-of-plane compression and shear has been analyzed. Specific core shapes examined are arc-tangent, wavy trapezoidal and hemispherical. Unit cells consisting of representative elements of the core attached to face sheets were selected for analysis. Both face sheets and core were assumed made from paper. Finite element analysis employing large deformation and rotations and orthotropic elastic–plastic behavior was used. The results show that the arc-tangent and trapezoidal cores are prone to collapse by extensive bending and buckling, whereas the hemispherical core behaved more stably in compression and shear. Core sheets with a hemispherical shape were prepared from copy paper sheets in a specially designed forming machine. Sandwich test specimens were prepared from this core and tested in out-of-plane compression, and the load-displacement response was compared to predictions from finite element simulations. The experimental and finite element results were consistent. [ABSTRACT FROM AUTHOR]

Abstract: Carbon fiber reinforced paper-based friction (CFRPF) material is a new type wet friction material which has been used in automatic transmission. In this study, four kinds of CFRPF were prepared by paper-making process with cashew-modified phenolic resin. The resin contents ranged from 35wt.% to 50wt.%, and the effect of phenolic resin on properties of CFRPF was investigated. Porosity of the samples was measured by liquid permeation method. The degradation characteristics of the samples were analyzed using a thermal analyzer. The friction and wear properties were tested by a wet friction performance tester. Scanning electron microscopy (SEM) was also employed to study the wear mechanisms. Experimental results indicated that the reinforced fibers were dispersed uniformly in the phenolic matrix, containing some pores with different size. There were three stages in the thermal degradation of CFRPF, and the resin content had great effect on the degradation temperature at the second stage. Lots of tiny wear particles were found on the surface of the worn samples with lower resin content. Continuous friction film was formed on the worn surface with the increasing resin content, which efficiently enhanced wear resistance of the samples. Comprehensively, the samples with lower resin content (ranging from 35wt.% to 40wt.%) demonstrated better potential with high friction coefficient, excellent friction stability, good heat-resistance and reasonable strength. [ABSTRACT FROM AUTHOR]

In this paper the deep drawing of cups from fiber-based materials, which is explored for some time now, is further developed through the use of micron-small vibrations in an ultrasonic frequency range within the deep-drawing tools. The design of such tools required preliminary investigations concerning the limitations of use and feasibility of this technology. These include tests for necessary clearances between punch and die, occurring pressure in this clearance, necessary punch forces and the heating of the material under the vibrational influence. According to these experiences a flexible test machine was developed enabling the examination of the deep drawing process with vibrating tools as well as its possibilities and limits. The dependence of punch force and cup quality from the ultrasonic parameters was determined and it was found that the required punch force can be reduced by up to 80% and a significant smoothing of the cup surface as well as an improved stiffness of the 3D-shapes is achieved. [ABSTRACT FROM AUTHOR]

Superhydrophobic coatings on paper were achieved by means of incorporating micro-nano hierarchical topography, where the water droplet was repelled and rested in a spherical shape. A silica sol, which was prepared using tetraethylorthosilicate (TEOS) as precursor and trimethylethoxysilane (TMES) as co-precursor, was poured on the paper to form a superhydrophobic surface. The coating was fluorine-free, environmentally friend, and could be easily fabricated on different kinds of papers. Besides, the transmittance of prepared coating reached up to 92% in visible light range, and the words on treated paper showed a good visualization. Moreover, the treated paper showed superior mechanical durability against 100 times of deformation, remarkable stability towards both the acidic and basic solutions. The treated paper could withstand 70 cycles of water condensation test (from 60 °C, 90% relative humidity to 10 °C) without losing superhydrophobicity, suggesting a long-term protection for paper. [ABSTRACT FROM AUTHOR]

Presents a theory on frictional vibrations of paper-based friction material considering the interaction between its deformation and the consequent lubricant flow inside it. Vibration model; Derivation of stability criterion; Relation between negative damping components in critical state; Contribution of each parameter to stability.

Abstract: Graphene oxide (GO) paper is a promising candidate for novel applications in energy storage systems such as electrical batteries, supercapacitors and multi-layered composites where the material undergoes deformation mechanisms. In particular, the strength of graphene oxide paper is critical in such applications and is defined by the interaction between the GO sheet constituents of the paper. The deformation behavior and tensile strength of focused ion beam (FIB) fabricated GO micro-beams was measured using in situ atomic force microscopy (AFM). GO sample deformation and failure was dependent on both the size of the micro-beams and the environmental testing conditions. Specifically, the failure stress of GO paper micro-beams tensile tested in air was found to increase when compared to testing in vacuum. This environmental dependent tensile strength of GO paper is attributed to water promoting stress transfer between GO sheets within the paper for higher strength during air testing while vacuum conditions remove water, leading to poor stress transfer between GO sheets for lower tensile strength results. A two-parameter Weibull distribution is introduced to quantify the micro-beam size dependent strength, which is attributed to interfacial defects determining GO paper failure strength. [Copyright &y& Elsevier]

The use of Raman spectroscopy in probing the deformation mechanisms of cellulose fibres (regenerated and natural), and two natural cellulose composite systems (wood and paper) is described. It is shown that during tensile deformation the 1095 cm−1 Raman band, corresponding to the stretching of the cellulose ring structure, shifts towards a lower wavenumber due to molecular deformation. By analysing a number of fibres with different microstructures this shift is shown to be invaluable in understanding the micromechanisms of deformation in these materials. Moreover, the rate of Raman band shift is shown to be invariant with stress for all fibre types, consistent with a fibre microstructure based on a modified series aggregate model. In the composite systems, such as wood and paper, it is shown that the stress-induced Raman band shift in the cellulose gives an important insight into their local deformation micromechanics. [ABSTRACT FROM AUTHOR]

In this paper, the creep and relaxation behaviors of Xuan paper during the stretching process were studied. The results indicated that Burgers model could describe the creep behavior of Xuan paper perfectly including elastic deformation, viscoelastic deformation and plastic deformation. For the total creep, elastic strain, viscoelastic strain and plastic strain accounted for 62-78, 17-25, and 4-13 %, respectively. At a certain temperature and humidity, elastic strain, viscoelastic strain and plastic strain increased with the increase in stress in the range of 0.2-0.8 σ, and the proportion of viscoelastic and plastic strain increased, but the proportion of elastic strain decreased. Further, the proportion of each strain tended to be stable at last. A five-element Maxwell model could describe the relaxation of Xuan paper effectively. There were few influences on the parameters of five-element Maxwell model by strain levels, so these parameters could be regarded as material constants. [ABSTRACT FROM AUTHOR]

Significant dimensional variations may occur in paper-based materials when subjected to changes in moisture content. Moisture induced deformations are governed by the swelling of individual fibres, which is transferred through inter-fibre bonds to the entire fibrous network. Complex interactions between mechanical and hygro-expansive properties take place in the bonding areas, affecting the overall material response. In most network models, the role of these inter-fibre bonds is not explicitly incorporated. This work presents a periodic meso-structural model for the discrete fibrous network, which considers the free-standing fibre segments and inter-fibre bonds. Despite its simplicity, the reference unit-cell enables the incorporation of relevant micro- and meso-structural features such as network structure, fibres and bond geometry and hygro-elastic properties. The proposed model is solved analytically through a proper homogenization strategy, allowing to recover the paper’s anisotropic hygro-mechanical response in terms of effective elastic constants and effective hygro-expansive coefficients, exploiting the coupling at the meso-structural level between hygroscopic and mechanical behavior. A comparison with experimental results obtained from the literature shows that the presented approach is quite accurate in predicting the overall paper response, thereby revealing the influence of several meso-scale parameters (e.g. fibre orientation, dimensions, mechanical strength). [ABSTRACT FROM AUTHOR]

Abstract: A mathematical model was developed to describe the relationship between the energy absorption properties of paper honeycombs and ambient humidity, as well as the structural parameters thereof. The model is a piecewise function modelling the energy absorption of four deformation stages of paper honeycomb (linear-elastic stage, yield stage, plateau stage and densification stage) separately. Function of each stage is a simple formula relating the energy absorption capacity to the thickness-to-length ratio of honeycomb cell, the mechanical property of a cell-wall material tested under a controlled atmosphere [23°C and 50% relative humidity (RH)] and the RH. Energy absorption curves were thereby obtained for paper honeycombs with a wide range of thickness-to-length ratios in arbitrary humidity environments. The created model was then verified by comparing the predicted energy absorption curves with the experimental ones. A good accordance between the predictions and the observations was achieved, indicating that the energy absorption models developed here could be used to practical application for the designing optimisation and material selection of paper honeycombs. [Copyright &y& Elsevier]

Abstract: The first part of this paper analyses the influence of the molecular weight and concentration of carboxymethyl cellulose (CMC) and of kaolin concentration on rheology of the coating colours and on paper properties coated with ultra lightweight coatings (ULWC). In the second part, relationships between the rheological characteristics of the coating colour formulations and coated paper surface quality was also studied. New indexes on paper roughness at micro-scale are presented (RZI and SRI). In general, they show good correlation with sheet gloss. A new gloss index (SGI) is presented, accounting for the contribution of gloss from machine direction (MD) and cross direction (CD). Porosimetry was used to access microstructural characteristics in order to correlate them with light scattering and gloss properties. The former property is closely related to Hg intrusion volume of the coated layer while gloss is related to surface porosity with pore diameters in the range of 7–15 μm as measured by Hg intrusion volume. [Copyright &y& Elsevier]

Abstract: This paper presents a method to predict the through-thickness moisture content distribution and associated induced deformations of paper and cardboard sheets as they are subjected to relative humidity changes. The transient moisture diffusion problem is solved using a “natural” analytic approach that has previously been applied for solving transient heat conduction in multi-layer solids. The deformation behaviour of the sheet during the moisture diffusion process is predicted using a semi-analytical approach based on a Rayleigh–Ritz minimization of the total potential energy. Geometrically nonlinear effects are taken into account. Curvatures of the originally flat sheet are predicted as a function of time, as are the shapes of the sheet for steady-state condition. As multiple solutions exist, stability is studied. The developed model was used to study the deformation behaviour of one paper and two cardboard sheets. Comparisons with finite-element results demonstrate that the developed model provides accurate results. The displacements obtained for steady-state conditions are within +6%. Comparisons with previous steady-state analyses reveal important differences in the shape of one cardboard sheet. This suggests that the moisture diffusion process may influence the configuration assumed by the sheet at steady-state equilibrium. Hence, it may be necessary to take the moisture diffusion into account in the analysis to accurately predict the hygro-mechanical behaviour of paper or cardboard sheets. [Copyright &y& Elsevier]

Free-standing paper-like or foil-like materials are an integral part of our technological society. Their uses include protective layers, chemical filters, components of electrical batteries or supercapacitors, adhesive layers, electronic or optoelectronic components, and molecular storage. Inorganic ‘paper-like’ materials based on nanoscale components such as exfoliated vermiculite or mica platelets have been intensively studied and commercialized as protective coatings, high-temperature binders, dielectric barriers and gas-impermeable membranes4,5. Carbon-based flexible graphite foils composed of stacked platelets of expanded graphite have long been used in packing and gasketing applications because of their chemical resistivity against most media, superior sealability over a wide temperature range, and impermeability to fluids. The discovery of carbon nanotubes brought about bucky paper, which displays excellent mechanical and electrical properties that make it potentially suitable for fuel cell and structural composite applications. Here we report the preparation and characterization of graphene oxide paper, a free-standing carbon-based membrane material made by flow-directed assembly of individual graphene oxide sheets. This new material outperforms many other paper-like materials in stiffness and strength. Its combination of macroscopic flexibility and stiffness is a result of a unique interlocking-tile arrangement of the nanoscale graphene oxide sheets. [ABSTRACT FROM AUTHOR]

In the field of LCD, Advanced Super Dimension Switch (ADS) technology is widely used due to its outstanding features, such as high transmittance, wide view, and weak color shift. However, the ADS technology still has intractable problems. One of the most difficult problems is the dark state light leakage under mechanical deformation which is inherent in ADS. In this paper, a novel model called Zero Light Leakage ADS (ZLL‐ADS) is proposed, which can completely eliminate the dark state light leakage even under deformation. The key point of ZLL‐ADS is the introduction of +A plate in ADS panel. The important role of +A is to compensate the phase retardation of liquid crystals to avoid dark state light leakage caused by external stress on ADS panel. By applying ZLL‐ADS technology, the product properties of BOE's ADS Pro, especially the quality of the dark picture has been greatly improved, and the advantages of ADS in high transmittance and wide view are still maintained. The compensation principle is explained theoretically and verified by 18.5 inch FHD flat and curved demoes. [ABSTRACT FROM AUTHOR]

Abstract: An anisotropic elasto-plastic constitutive model of paper material is presented. It is formulated in a spatial setting in which anisotropic properties are accounted for by use of structural variables. A multiplicative split of the deformation gradient is employed to introduce plasticity. A similar approach is used to model the plastic deformation of the substructure. The yield surface adopted is based on the Tsai–Wu failure criterion, used previously to model failure of paper material. A non-associated plasticity theory is employed to calibrate the model to experimental data. It turns out that a multi-axial loading situation is needed to calibrate the model and here a biaxial tension test is audited. The model was implemented into a finite element environment and the creasing process of a corrugated board panel is investigated. [Copyright &y& Elsevier]

Abstract: The formation mechanisms of wrinkles in single layer graphene sheets and graphene oxide (GO) papers, as well as their effects on the corresponding Young’s moduli have been studied based on the molecular dynamics simulations. Wrinkling occurs in GO papers in the form of undulation as a consequence of the interactions between the adjacent individual GO sheets. In particular, the edge-to-edge interactions play a dominant role in determining the wrinkled structure, whereas the face-to-face interactions hardly cause wrinkles as they are thermodynamically stable with inherently low potential energies. Both graphene sheets and GO papers with wrinkles show two different modes of deformation in tension. Although wrinkles have only a negligible effect on Young’s modulus of the individual graphene sheets, they reduce the Young’s modulus of GO papers by as much as 60% of the pristine value. [Copyright &y& Elsevier]