Search

The ultrasonic wave velocities in a polycrystalline aggregate are sensitively influenced by texture development due to plastic deformation. According to Sayer's model, it is possible to construct ultrasonic pole figures via the crystallite orientation distribution function (CODF), which can be calculated by using ultrasonic wave velocities. In the previous papers, the theoretical modeling to simulate ultrasonic wave velocities propagating in solid materials under plastic deformation has been proposed by the authors and proved to be a good agreement with experimental results. Generally, wave velocities are dependent upon the propagating wave frequency; hence to evaluate texture development via ultrasonic pole figures it is necessary to examine an influence of frequency dependence on the ultrasonic wave velocities. In the present paper, the proposed theoretical modeling is applied to the texture characterization in polycrystalline aggregates of FCC metals under various plastic strain histories via ultrasonic pole figures, and also the frequency dependence is examined by using Granato-Lücke's dislocation strings model. Then the simulated ultrasonic pole figures are compared with the pole figures analyzed by the finite element polycrystal model (FEPM). The good qualitative agreement between both results suggests the sufficient accuracy of our proposed theoretical modeling. [ABSTRACT FROM AUTHOR]

This paper investigates the transmission loss of symmetric and asymmetric laminate composite panels periodically reinforced by composite stiffeners. A comprehensive model based on periodic structure theory is developed. First order shear deformation theory is used and the coupling of the in-plane motion of the panel with its out-of-plane motion is taken into account. Stiffeners interact with the panel through three forces (two in-plane, one out-of-plane) and a torsion moment. Three types of cross sections are investigated for the composite stiffeners: I-shaped, C-shaped, and omega-shaped cross-sections. The model is validated numerically by comparison with the finite element/boundary element method. Experimental validations are also conducted. In both cases, excellent agreement is obtained. Numerical results show that the in-plane coupling effect is increased by increasing the panel thickness and the stiffener's eccentricity. The in-plane coupling effect is also found to increase with frequency. [ABSTRACT FROM AUTHOR]

This paper reports finite-element simulations of drop deformation in converging flows in an axisymmetric conical geometry. The moving interface is captured using a diffuse-interface model and accurate interfacial resolution is ensured by adaptive refinement of the grid. We have explored the effects of viscoelasticity on drop deformation when either the drop or the matrix is a Giesekus fluid. Contrary to the popular belief that viscoelasticity in the drop hinders deformation and that in the matrix enhances deformation, we predict a more complex picture in which viscoelasticity in either component may suppress or promote drop deformation depending on the capillary number Ca and the drop-to-matrix viscosity ratio β. Smaller Ca and β are conducive to the behavior mentioned above, while large Ca and β may produce the opposite effect. Both trends are explained by the reaction of the polymer stress to the inhomogeneous and transient deformation in the converging flow field. Finally, this understanding reconciles contradictory results in the literature as opposite limits in the parameter space. [ABSTRACT FROM AUTHOR]

A theoretical analysis is carried out in an effort to understand certain unusual properties of transient guided waves produced in a thin unidirectional graphite/epoxy composite plate by a localized dynamic surface load. The surface motion is calculated using an approximate plate theory, called the shear deformation plate theory (SDPT), as well as a recently developed finite element analysis (FEA), for their mutual verification. The results obtained by the two methods are shown to have excellent agreement. An interesting, nearly periodic "phase reversal" of the signal with propagation distance is observed for each propagation direction relative to the fiber direction. For clarification, a closed form analytical expression for the vertical surface displacement in an aluminum plate to an impulsive point force is obtained using the steepest descent method. It is found that the strong dispersion of the first antisymmetric waves at low frequencies is the main reason behind the phase reversal. This is verified further by measuring the surface response of a relatively thick aluminum plate to a pencil lead break source. The understanding developed in the paper is expected to be helpful in detecting and characterizing the occurrence of damage in composite structures. [ABSTRACT FROM AUTHOR]

The various aspects of the nonlinear dynamics and stability of nonisothermal film casting process have been investigated solving a two-dimensional (2D) viscoelastic simulation model equipped with the Phan-Thien-Tanner (PTT) constitutive equation by employing a finite element method. This study represents an extension of the earlier report [Kim, Lee, Shin, Jung, and Hyun, J. Non-Newtonian Fluid Mech. 132, 53–60 (2005)] in that two important points are additionally addressed here on the subject: the nonisothermal nature of the film casting, and the differentiation of extension-thickening (strain hardening) and extension-thinning (strain softening) fluids in their different behavior in the film casting process. The PTT model, known for its robustness in portraying dynamics in the extensional deformation processes which include the film casting of this study along with film blowing and fiber spinning as well, renders the transient and steady state solutions of the dynamics in the 2D, viscoelastic, nonisothermal, film casting capable of explaining the effects of various process and material parameters of the system on the film dynamics of the process. Especially, the different behavior displayed by two polymer groups, i.e., the extension-thickening low density polyethylene (LDPE) type and the extension-thinning high density polyethylene (HDPE) type, in the film casting can be readily explained by the PTT equation-included simulation model. The three nonlinear phenomena commonly observed in film casting, i.e., draw resonance oscillation, edge bead, and neck-in, have been successfully delineated in this study using the simulation and experimental results. [ABSTRACT FROM AUTHOR]