4,768 results
Search Results
2. Are models better read on paper or on screen? A comparative study.
- Author
-
El-Attar, Mohamed
- Subjects
- *
COMPUTER software development , *SYSTEMS software , *SOFTWARE engineers , *COMPARATIVE studies , *ENGINEERING students - Abstract
Is it really better to print everything, including software models, or is it better to view them on screen? With the ever increasing complexity of software systems, software modeling is integral to software development. Software models facilitate and automate many activities during development, such as code and test case generation. However, a core goal of software modeling is to communicate and collaborate. Software models are presented to team members on many mediums and two of the most common mediums are paper and computer screens. Reading from paper or screen is ostensibly considered to have the same effect on model comprehension. However, the literature on text reading has indicated that the reading experiences can be very different which in turn effects various metrics related to reader performance. This paper reports on an experiment that was conducted to investigate the effect of reading software models on paper in comparison with reading them on a computer screen with respect to cognitive effectiveness. Cognitive effectiveness here refers to the ease by which a model reader can read a model. The experiment used a total of 74 software engineering students as subjects. The experiment results provide strong evidence that displaying diagrams on a screen allows subjects to read them quicker. There is also evidence that indicates that on screen viewing induces fewer reading errors. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
3. Influence of using a pen-and-paper or computer-based approach on engineering students' self-efficacy during idea generation.
- Author
-
Valentine, Andrew, Belski, Iouri, and Hamilton, Margaret
- Subjects
- *
SELF-efficacy in students , *SELF-efficacy , *ENGINEERING students , *ONLINE education , *PROBLEM solving , *CREATIVE ability - Abstract
Creativity is an important skill for engineers but many students face a lack of experience in idea generation, often compounded by low-self efficacy towards creativity. Providing students with online training modules has been suggested as one solution. However, the literature demonstrates using a computer can influence performance and self-efficacy in a different manner to using pen-and-paper. There is a current lack of research on whether computers may influence self-efficacy during idea generation tasks. Two experiments involving computer-based and pen-and-paper groups were designed. Groups were provided with templates that guided them through the process of applying an idea generation technique and were given sixteen minutes to generate ideas to solve a presented problem. Results revealed that students' performance was similar and using a computer does not negatively influence self-efficacy. This shows that students can engage in idea generation learning tasks using computer-based modes without negatively influencing performance or self-efficacy, suggesting an avenue for educators to engage students with building creativity skills. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
4. Non-directive team coaching in engineering education to strengthen teamwork competencies
- Author
-
García-Galán, Ramiro, Ortiz-Marcos, Isabel, and Molina-Sánchez, Rafael
- Published
- 2024
- Full Text
- View/download PDF
5. Cheating in e-exams and paper exams: the perceptions of engineering students and teachers in Norway.
- Author
-
Chirumamilla, Aparna, Sindre, Guttorm, and Nguyen-Duc, Anh
- Subjects
- *
ENGINEERING students , *STUDENT cheating , *ELECTRONIC countermeasures , *MIXED methods research , *ENGINEERING education - Abstract
A concern that has been raised with the transition from pen and paper examinations to electronic examinations is whether this will make cheating easier. This article investigates how teachers and students perceive the differences in ease of cheating during three types of written examination: paper exams, bring your own device e-exams and e-exams using university-owned devices. It also investigates perceptions about the effectiveness of some typical countermeasures towards cheating across these examination types. A mixed-method approach was used, combining questionnaires and interviews with students and teachers in the authors' own university. A total of 212 students and 162 teachers participated in the questionnaire survey, and then, a more limited number were interviewed to get a deeper understanding of the results. Six-different cheating practices were considered – impersonation, forbidden aids, peeking, peer collaboration, outside assistance and student–staff collusion and seven different countermeasures were considered – proctors, biometry, mingling, shuffling, random drawing, sequencing and broadcasting. Both students and teachers perceived cheating as easier with e-exams, and especially with bring your own device. They also thought some countermeasures would be easier to implement with e-exams. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
6. CALL FOR PAPERS: THE GAME, A GAMIFIED TOOL FOR TEACHING SCIENTIFIC WRITING IN ENGINEERING STUDENTS.
- Author
-
NÚÑEZ-PACHECO, ROSA, VIDAL, ELIZABETH, TURPO-GEBERA, OSBALDO, and CASTRO-GUTIÉRREZ, EVELING
- Subjects
TECHNICAL writing ,TECHNICAL writing education ,ENGINEERING students ,CONVENIENCE sampling (Statistics) ,GAMIFICATION ,USER experience ,TRAINING of engineers - Abstract
This paper presents the evaluation of the alpha version of a gamified tool called Call for Papers: The Game (CfP:TG), specially designed for teaching scientific writing in the training of future engineers. A non-probabilistic convenience sampling was carried out with the participation of engineering students from a Peruvian public university. The short version of the user experience questionnaire (UEQ) was applied, and usability was qualitatively evaluated. The main results indicate that the Pragmatic Quality of CfP:TG is in the neutral range with a value of 0.729, and the Hedonic Quality receives a positive evaluation with a value of 1.089. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
7. Providing project management knowledge and skills through scaffolding and project-based learning strategy
- Author
-
Pokharel, Shaligram
- Published
- 2023
- Full Text
- View/download PDF
8. In-class Paper Demonstrations and Experiments for Solid Mechanics Courses.
- Author
-
Xu, L. Roy
- Subjects
MECHANICS (Physics) -- Study & teaching ,CURRICULUM ,ENGINEERING students ,FRACTURE mechanics ,SCISSORS & shears - Abstract
Attending in-class paper demonstrations and performing experiments in solid mechanics courses are very effective ways for students to gain an understanding of the complicated concepts of mechanics. This paper explores a few applications of dogbone tensile tests, stress concentrations and crack kinking or mixed-mode fracture. Furthermore, this handy technique can be extended to other broader areas of mechanics education. Since only simple materials and supplies are used, copy paper, staples, scissors and a paper punching machine, students can repeat these typical mechanics experiments in future in other locations, such as in an office or at home. Therefore, this simple and effective technique can have a remarkable influence on the student's long-term career. [ABSTRACT FROM AUTHOR]
- Published
- 2008
9. "The theorem says...": Engineering students making meaning of solutions to Ordinary Differential Equations.
- Author
-
Hernandez-Martinez, Paul, Rogovchenko, Svitlana, Rogovchenko, Yuriy, and Treffert-Thomas, Stephanie
- Subjects
- *
ENGINEERING students , *RESEARCH papers (Students) , *EXISTENCE theorems , *ENGINEERING education , *DIFFERENTIAL equations , *ORDINARY differential equations - Abstract
There is a need for further studies on students' learning of Differential Equations (DEs), especially in advanced undergraduate and graduate courses. Research on the mathematical education of engineers shows a conflict between students' demands for practical, contextualized pedagogies and the need for abstract reasoning and appropriate use of mathematical results. Few papers focus on engineering students' interpretation of theorems and their use as tools in argumentation and problem-solving. This paper takes a sociocultural stance on learning and employs dialogical inquiry – a methodology rooted in Bakhtinian theory, newly developed for collaborative inquiry and qualitative data analysis – to investigate the meanings that senior engineering students made while working on a task designed to evaluate their understanding of Existence and Uniqueness Theorems (EUTs) of solutions of DEs. We identified two important epistemological disconnections that explain the difficulties that some of our students faced in making meaning of solutions of DEs and the EUT. • There is a need for more studies on the learning of Differential Equations (DEs). • Few research papers focus on students' meaning-making of theoretical results in DEs. • Dialogical inquiry methodology was used to analyze students' meaning-making processes. • Two epistemological disconnections were found that explain students' difficulties. • The use of warrants in students' dialogue was important in their meaning-making. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
10. BUILDING BRIDGES: STRENGTHENING ORAL COMMUNICATION SKILLS FOR RURAL CIVIL ENGINEERING STUDENTS.
- Author
-
P., LAKSHMILAVANYA and A., SREENIVASULU
- Subjects
ORAL communication ,COMMUNICATIVE competence ,CIVIL engineers ,ENGINEERING students ,CIVIL engineering - Abstract
Effective communication is pivotal to professional success in civil engineering. However, rural students often face unique challenges in mastering oral communication, especially in English. This study seeks to examine the challenges faced by engineering students from rural backgrounds when speaking English and the underlying reasons for these difficulties. This paper implemented specific tasks inspired by task-based language teaching methodology in the study of participants to analyze their speaking challenges and their root causes. The findings revealed that speaking English posed challenges primarily due to fear of errors, anxiety, shyness and low confidence levels. This paper proposes solutions, such as creating a supportive environment and promoting regular English communication, to address these issues. The research highlights the transformative impact of effective communication and calls for further studies to refine and expand these educational strategies. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
11. Developing creativity and problem-solving skills of engineering students: a comparison of web- and pen-and-paper-based approaches.
- Author
-
Valentine, Andrew, Belski, Iouri, and Hamilton, Margaret
- Subjects
- *
ENGINEERING education in universities & colleges , *ENGINEERING students , *PROBLEM solving , *TEACHING aids , *DISTANCE education , *YOUNG adults , *HIGHER education , *UNIVERSITIES & colleges - Abstract
Problem-solving is a key engineering skill, yet is an area in which engineering graduates underperform. This paper investigates the potential of using web-based tools to teach students problem-solving techniques without the need to make use of class time. An idea generation experiment involving 90 students was designed. Students were surveyed about their study habits and reported they use electronic-based materials more than paper-based materials while studying, suggesting students may engage with web-based tools. Students then generated solutions to a problem task using either a paper-based template or an equivalent web interface. Students who used the web-based approach performed as well as students who used the paper-based approach, suggesting the technique can be successfully adopted and taught online. Web-based tools may therefore be adopted as supplementary material in a range of engineering courses as a way to increase students’ options for enhancing problem-solving skills. [ABSTRACT FROM PUBLISHER]
- Published
- 2017
- Full Text
- View/download PDF
12. A Scoping Literature Review of Engineering Thriving to Redefine Student Success.
- Author
-
Gesun, Julianna S., Major, Justin C., Berger, Edward, Godwin, Allison, Jensen, Karin J., Chen, John, and Froiland, John Mark
- Subjects
ENGINEERING education ,ENGINEERING teachers ,ENGINEERING students ,UNDERGRADUATE education ,STUDENT development - Abstract
Background: The importance of thriving is well-established, but little is known about thriving for undergraduate engineering students. We introduce engineering thriving as the process by which engineering students develop optimal functioning in undergraduate engineering programs. Since thriving is currently underexplored in the engineering education literature, we investigated the larger body of literature on engineering student success. Purpose: We introduce the concept of engineering thriving to synthesize the largely discrete existing bodies of literature on engineering student success to bring together many different perspectives, methodological approaches, and findings that shape our understanding of engineering thriving. Our work on thriving unites disparate lines of research on engineering student success, challenges the assumption that addressing barriers automatically leads to success, and strives to change the way engineering education views student success. Scope/Method: We used the scoping literature review method to investigate papers on undergraduate engineering student success. Four databases were searched, yielding 726 initial papers that studied separate dimensions of engineering student success, such as academic, personal, cognitive, and behavioral. We integrated the relationships among these dimensions to develop an understanding of engineering thriving. Our final analysis included 68 papers after removing duplicates and applying selection criteria. Conclusions: Our findings indicate that an engineering student thriving includes multiple dimensions of success, involves cyclical processes of growth and adaptation, and consists of synergistic competencies that should ideally be studied together with as many other competencies as possible. These findings support the conclusion that engineering thriving can be understood as helping students manage constantly changing internal and external factors within the broader engineering education system. [ABSTRACT FROM AUTHOR]
- Published
- 2023
13. Learning method design for engineering students to be prepared for Industry 4.0: a Kaizen approach
- Author
-
Hasan, Md. Zahid, Mallik, Avijit, and Tsou, Jia-Chi
- Published
- 2021
- Full Text
- View/download PDF
14. Evaluation of Final Examination Papers in Engineering: A Case Study Using Bloom's Taxonomy.
- Author
-
Swart, Arthur James
- Subjects
- *
EXAMINATIONS , *ELECTRICAL engineering examinations , *ENGINEERING , *BLOOM'S taxonomy , *ENGINEERING students ,EXAMINATIONS, questions, etc. - Abstract
Questions are used to obtain information, stimulate thinking, and redirect reasoning. Academics in higher education use questions on a daily basis to stimulate thinking and reasoning in students. Final examination papers are used by academics to assess the retention and application skills of students. The assumption, however, exists that questions relating to application skills at universities of technology should start to dominate the higher academic levels in education, with a subsequent drop in questions regarding retention skills. These questions may be categorized as either higher order or lower order questions. This article attempts to distinguish between these two types of questions in light of Bloom's taxonomy, with similar concepts such as deep and surface learning being examined. The literature review is applied to an electrical engineering module titled Electronics, which serves as the case study. The results of this study indicate that a high percentage of the final examination papers dealt with the objective "Application," where students had to make use of numerous mathematical equations to solve various unknowns. The results also indicated that academics in electronics are using more lower order than higher order questions in their final examination papers. A balance is suggested between these two types of questions for various academic levels at universities of technology. [ABSTRACT FROM AUTHOR]
- Published
- 2010
- Full Text
- View/download PDF
15. A predictive model for classifying college students' academic performance based on visual-spatial skills.
- Author
-
Min Ji, Jintao Le, Bolun Chen, and Zhe Li
- Subjects
ENGINEERING students ,PROFESSIONAL employee training ,ARTIFICIAL intelligence ,EVIDENCE gaps ,SCIENCE students ,ACHIEVEMENT - Abstract
As the application of visual-spatial skills in academic disciplines, vocational fields and daily life is becoming more and more prominent, it is of great theoretical and practical significance how to make use of big data and artificial intelligence technology to conduct research on the relationship between visual-spatial skills and students' grades. This paper explores and analyses from the perspective of artificial intelligence, combining students' visual-spatial skills and students' specific attribute characteristics to construct an expert system, which defines the prediction of academic performance as a classification problem corresponding to the five categories of excellent, good, moderate, passing, and weak, respectively, and based on which a deep neural network-based classification prediction model for students' performance is designed. The experimental results show that visual-spatial skills plays an important role in the professional learning of science and engineering students, while the classification model designed in this paper has high accuracy in the grade prediction process. This paper not only helps to fill the gaps in the current research field, but is also expected to provide scientific basis for educational practice and promote the development of the education field in a more intelligent and personalized direction. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
16. A Conceptual Framework on Imaginative Education-Based Engineering Curriculum.
- Author
-
Raza, Kashif, Li, Simon, and Chua, Catherine
- Subjects
ENGINEERING education ,ENGINEERING students ,CURRICULUM ,EDUCATIONAL planning ,SOFT skills - Abstract
Traditional engineering education (Eng. Ed) has received criticism for restricting student learning and experiences to practical skills development while ignoring the significance of fostering cognitive skills that encourage higher order thinking, criticality, and self-reflexivity. Imaginative education (IE) has emerged as a consideration for replacing such skills focused engineering curricula with interactive, engaging, and student-centered pedagogical approaches. However, existing literature on the topic as well as Egan's (1997) own explanation of the five stages of understanding (somatic, mythic, romantic, philosophic, and ironic) are mainly focused on K-12 contexts, leaving limited resources and insights for higher education contexts. This calls for theoretical and practical expansion of the topic where development and implementation of IE-informed Eng. Ed for adult engineering students remain the focus. To respond to this call, this conceptual paper focuses on two main points. First, it attempts to unpack the theoretical underpinnings of the five stages of IE to understand what each stage means for educators and learners in higher education engineering contexts. Second, after outlining the challenges that traditional Eng. Ed is facing in a globalized world today and the initiatives from the field to address them, it discusses the promises IE can bring to make Eng. Ed more effective, inclusive, and relevant. Overall, the intention in this paper is to turn to the theoretical tensions that may emerge when considering IE as an approach to re-imagine and expand Eng. Ed. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
17. Using Paper-and-Pencil Solutions to Assess Problem Solving Skill.
- Author
-
TARABAN, ROMAN, CRAIG, CURTIS, and ANDERSON, EDWARD E.
- Subjects
- *
ENGINEERING students , *JOB skills , *PROBLEM solving , *COGNITION , *QUALITATIVE research , *QUANTITATIVE research , *TRAINING - Abstract
BACKGROUND Problem solving practice involving paper-and-pencil solutions is a common activity in undergraduate engineering training. This paper addresses three questions: What indicators of problem-solving skill are available in paper-and-pencil solutions, beyond a simple accuracy measure? Can these indicators distinguish between problem solvers in terms of their skill level? How can these indicators be used to improve the effectiveness of instructor feedback to problem-solving exercises? PURPOSE (HYPOTHESIS) Based on the published literature on cognition and problem solving, several indicators were hypothesized to signal knowledge and skill: an accurate free-body diagram, specification of assumptions, accurate expansion of key principles, strategic (forward) inferences, and checking equations and solutions. DESIGN/METHOD A mixed experimental methodology was applied that combined qualitative and quantitative analyses. The qualitative data was comprised of paper-and-pencil solutions and video recordings of participants while they solved problems. Frequency counts of skill indicators and grader-assigned scores comprised the quantitative data. RESULTS Statistical tests confirmed that the hypothesized indicators were associated with individuals' level of skill. However, reliable evidence for these indicators was only partially found in the paper-and-pencil solutions and could only be firmly established by including data from the video recordings. CONCLUSIONS The results show that paper-and-pencil solutions can be diagnostic of the strengths and weaknesses of problem-solvers. However, to provide useful and reliable feedback to students, these solutions must be supplemented with additional input, possibly through regular structured sampling throughout a course, or through more extensive use of computer resources. [ABSTRACT FROM AUTHOR]
- Published
- 2011
- Full Text
- View/download PDF
18. Modeling of student academic achievement in engineering education using cognitive and non-cognitive factors
- Author
-
Al-Sheeb, Bothaina A., Hamouda, A.M., and Abdella, Galal M.
- Published
- 2019
- Full Text
- View/download PDF
19. Developing engineering students’ willingness and ability to perform creative tasks
- Author
-
Pettersen, Inger Beate, Åmo, Bjørn Willy, van der Lingen, Elma, Håvåg Voldsund, Kari, and Johnstad Bragelien, Judit
- Published
- 2019
- Full Text
- View/download PDF
20. The paper beam: hands-on design for team work experience of freshman in engineering.
- Author
-
Kalkani, EfrossiniC., Boussiakou, IrisK., and Boussiakou, LedaG.
- Subjects
- *
ENGINEERING education , *ENGINEERING students , *COLLEGE teachers , *ENGINEERING design , *ENGINEERING - Abstract
The present research refers to the assigning of a hands-on group project to freshman engineering students, evaluating their performance, and deriving conclusions on student benefits and educational advances. The research procedure included action plans for the instructor and the students, instructions to the students on performing the work, organizational instructions to the teams and reporting guidelines, and evaluation of the success of the project. The main outcomes refer to the team co-operation, the performance of tasks, the quality of results and the reporting effectiveness. The ‘paper beam’ project benefited the student’s learning and proved the need of complementary learning styles in teams, of the appreciation of quality performance and results, as well as of the accuracy in project details. [ABSTRACT FROM AUTHOR]
- Published
- 2005
- Full Text
- View/download PDF
21. Students’ view of Quantum Information Technologies, part 2.
- Author
-
Wojtkowski, Marcin, Bartoszewski, Michał, Buchwald, Wojciech, Joachimczyk, Karolina, Kawala, Ada, and Romaniuk, Ryszard S.
- Subjects
QUANTUM information theory ,ENGINEERING students ,INFORMATION & communication technologies ,QUANTUM computing ,INTERNET security - Abstract
The aim of the paper is to show how graduated engineering students in classical ICT view practically the advent of the QIT. The students do their theses in El.Eng. and ICT and were asked how to implement now or in the future the QIT in their current or future work. Most of them have strictly defined research topics and in some cases the realization stage is advanced. Thus, most of the potential QIT application areas are defined and quite narrow. In such a case, the issue to be considered is the incorporation of QIT components and interfaces into the existing ICT infrastructure, software and hardware alike, and propose a solution as a reasonable functional hybrid system. The QIT components or circuits are not standalone in most cases, they should be somehow incorporated into existing environment, with a measurable added value. Not an easy task indeed. We have to excuse the students if the proposed solutions are not ripe enough. The exercise was proposed as an on-purpose publication workshop, related strictly to the fast and fascinating development of the QIT. The paper is a continuation of publishing exercises with previous groups of students participating in QIT lectures. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
22. VBL Collaborative: An Approach for Teaching Complex Transmission Line Problem Statements.
- Author
-
Mergu, Rohini R., Shelke, Rupali J., Shetgar, Piyusha S., and Thalange, Asha V.
- Subjects
TEACHING teams ,ENGINEERING students ,EDUCATIONAL outcomes ,EXPERIMENTAL groups ,DENTAL metallurgy ,EDUCATORS - Abstract
The educator's choice of techniques is intended to foster a strong love of learning. The different methods of learning can improve learners' abilities. The need of pupils to learn cannot be met by only conventional teaching. When pupils graphically answer the provided question, this is clearly seen. This paper studied students' performance for the graph based topic 'Smith Chart' for the course 'Radar and Microwave Engineering' for the third year of engineering students. Total 64 students of the same class considered for the experiment. Video based learning (VBL) is methodology is used in this paper. Total 64 students learn the said chart (Smith Chart) through videos. VBL along with collaborative approach is carried out for experimental group. The two group posttest is carried out. The two group post test results presented in the paper. The assessment is carried out w.r.to Learning Outcomes (LO) and Bloom's Level (BL). The objectives of the study are to introduce and make students understand Smith chart (BL: Understand, LO1); to determine transmission line parameters and impedance along the line (BL: Apply, LO2); to examine the effect of load variations on transmission line parameters. (BL: Analyze, LO3). The results w.r.to LOs and BL are presented in this paper for both control and experimental group. To assess the level of effectiveness of the intervention feedback is taken from experimental group. Almost 96% students liked the activity. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
23. The Experimental Contribution of Petrus Van Musschenbroek to the Discovery of a Buckling Formula in the Early 18th Century.
- Author
-
Godoy, Luis A. and Elishakoff, Isaac
- Subjects
EIGHTEENTH century ,ENGINEERING students ,PAPER arts ,BOOK industry exhibitions ,MECHANICAL buckling - Abstract
This paper concentrates on the work by Petrus van Musschenbroek published in 1729, constituting apparently the first study in the literature on column buckling. To understand the significance of Musschenbroek's contribution, we provide the combined personal, historic and scientific contexts in which he carried out his studies; he was the first researcher to deal with the failure of compressed elements as a new phenomenon. Most unfortunately, his name is not currently known except for a small circle of historians of science, whereas engineering students at present are told that buckling should be associated with the name of Leonhard Euler. We fully share the idea of Benvenuto stating that "Musschenbroek's experimental law is of considerable historical interest." The contributions in his 1729 book are shown not only to include his experimental work but Musschenbroek also devised a design procedure for column buckling. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
24. The Academic and Personal Experiences of Engineering Technology and Welding Technology Students: A Literature Review.
- Author
-
Vempala, Vibhavari and Mondisa, Joi-Lynn
- Subjects
LITERATURE reviews ,ENGINEERING students ,TECHNICAL literature ,RESEARCH questions ,ECONOMIC forecasting - Abstract
Objective/Research Question: There is a growing demand for skilled workers in engineering and technology fields. However, the number of engineering technology degrees awarded is much less compared to engineering, and a high percentage of students in engineering technology do not persist beyond the first year. To meet the demands for skilled workers, it is important to understand the experiences of engineering technology students to identify factors that contribute to their matriculation and persistence. The purpose of this paper is to summarize the research that exists on the academic and personal experiences of engineering technology and welding technology students. The research questions guiding this study are: (a) what are the academic and personal experiences of engineering technology and welding technology students at 2- and 4-year institutions? and (b) what are students' experiences with persisting in engineering technology? Methods: Using our research questions and predetermined inclusion criteria, we performed a literature review of relevant articles retrieved from Scopus and ERIC ProQuest databases. Results: We identify three areas of opportunities for future research examination: (a) experiences of students of marginalized populations in engineering technology, (b) how to leverage career and technical education and 2-year engineering technology programs to support matriculation, and (c) ways to address the negative stigma associated with engineering technology programs. Conclusions/Contributions: To meet the demands of the nation's economy and future workforce, it is important to further examine the experiences of engineering technology students. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
25. Roadmapping towards sustainability proficiency in engineering education
- Author
-
Rodriguez-Andara, Alejandro, Río-Belver, Rosa María, Rodríguez-Salvador, Marisela, and Lezama-Nicolás, René
- Published
- 2018
- Full Text
- View/download PDF
26. Framing the Research and Engaging the Reader in Graduate Engineering Students' Abstracts.
- Author
-
Bogdanović, Vesna and Gak, Dragana
- Subjects
ENGINEERING students ,GRADUATE students ,SENTENCES (Grammar) ,STUDENT engagement ,CORPORA ,QUANTITATIVE research - Abstract
Writing an abstract is a challenging assignment for graduate students as it requires condensing all the extensive research into a few sentences, providing sufficient background knowledge, and presenting findings compellingly to the academic community. This study observes how graduate engineering students cope with writing their abstracts for their first published papers, with a specific focus on metadiscourse. The study is based on the learner corpus of 1,746 abstracts (117,535 words) written by non-native English speakers in English and Serbian during their Master's studies. The research follows Hyland's taxonomy, focusing on interactive frame markers and interactional engagement markers, together with metadiscursive nouns in order to uncover cross-linguistic patterns and pedagogical implications. The comparison of the absolute and relative frequency with statistical significance and log likelihood between Serbian and English sub-corpora demonstrates that students tend to use frame markers with greater frequency in Serbian abstracts than in English ones. Additionally, engagement markers, and especially directives, are used twice as often as frame markers in both sub-corpora, with a higher prevalence in English abstracts. Following the qualitative and quantitative analyses, the findings offer pedagogical implications related to the range of frame markers and metadiscursive nouns used by students to introduce their research aims and the range of engagement markers used to engage readers in their research and thus claim their credibility in academic writing. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
27. Daniel W. Mead Student Paper Contest winners.
- Author
-
Brennan, Rachel A. and Johnson, Darcie B.
- Subjects
- *
ENGINEERING students , *SCIENCE projects , *SCIENCE education ,COMPETITIONS - Abstract
Presents the science projects by engineering students recognized in the 1997 Daniel W. Mead Student Paper Contest in the United States. Participation of three universities; Projects presented; Scientific relevance.
- Published
- 1998
28. Paper-Clip Case: A Practical Activity to Improve Statistical Thinking for Engineering Students.
- Author
-
Viles, E.
- Subjects
- *
STATISTICS education , *ENGINEERING students , *STATISTICAL reliability , *INDUSTRIAL statistics , *REASONING , *PROBLEM solving - Abstract
In this article I present an activity introducing statistical concepts to engineering students to help them develop inductive reasoning and problem-solving skills. [ABSTRACT FROM AUTHOR]
- Published
- 2008
- Full Text
- View/download PDF
29. Taking Stock: An Analysis of the Publishing Record as Represented by the Journal of Engineering Education.
- Author
-
WHITIN, KATHERINE and SHEPPARD, SHERI
- Subjects
ENGINEERING education in universities & colleges ,ASSOCIATIONS, institutions, etc. ,SCHOLARSHIPS ,ENGINEERING teachers ,ENGINEERING students ,TECHNICAL literature - Abstract
The Journal of Engineering Education emerged in the engineering education community in 1993 as a continuation of the American Society of Engineering Education's journal, Engineering Education. The Journal of Engineering Education was to play a role in the broadening of engineering education culture by helping to bring the scholarship of engineering education to the same level of respect and recognition in the faculty reward system as traditional scholarship in engineering sciences. In doing so, the journal hoped to keep pace with and encourage the significant changes in engineering education needed to prepare for the challenges of 21st century practice. This paper discusses the engineering education environment as reflected in six years of papers published in the Journal of Engineering Education from 1996 to 2001. Topics of papers are identified, along with changes and trends in these topics during the six-year period. In addition, characteristics of particularly convincing papers are enumerated and discussed. This paper is offered as a summary and review of this six-year body of work on engineering education and should aid the engineering education community in reflecting on the success of the Journal in promoting and encouraging the scholarship of teaching. [ABSTRACT FROM AUTHOR]
- Published
- 2004
- Full Text
- View/download PDF
30. Teaching Engineering Graphics through Digital Presentations for Engineering Students.
- Author
-
Doçi, Ilir and Lajqi, Shpetim
- Subjects
ENGINEERING students ,STUDENT attitudes ,STUDENT presentations ,TECHNICAL drawing ,TEACHING methods ,NAVAL architecture - Abstract
All new students at the University of Prishtina "Hasan Prishtina", Faculty of Mechanical Engineering, take an Engineering Graphics course in the first semester. The subject is divided into two sections: Technical Drawing and Descriptive Geometry. To teach lectures, professors use didactic equipment such as LCD projectors and drawing on the table. Assistants demonstrate exercises by drawing mechanical parts in the table. In 2014, teachers began using digital presentations with animations in their lectures. They contain developed presentations using PowerPoint software with stepby- step animations of mechanical parts. The paper examines the effectiveness of this methodology from both the student and teacher perspectives. The study is based on a survey of students, teachers' experiences, and a comparison of exam results. The analysis discusses the methodology's effectiveness, presentation quality, knowledge gained, ease of learning, impact on exam pass rate, and other benefits. The following are some key findings from this paper: students accept and favor this teaching methodology; it is more effective than hand drawing; it has a significant impact on exam pass rates; and it is simple to understand the lectures. Teachers like this methodology because it allows for step-by-step explanation with animations; repeating options; presentations are created only once, easy corrections, developing many examples of mechanical parts with less effort, and students can easily access them. The paper contributes to a new teaching methodology for students in their first year of Engineering studies, Bachelor level, in the subject of Engineering Graphics. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
31. Low-Cost Efficient Wireless Intelligent Sensor (LEWIS) for Research and Education.
- Author
-
Sanei, Mahsa, Atcitty, Solomon, and Moreu, Fernando
- Subjects
INTELLIGENT sensors ,ENGINEERING students ,SOFTWARE architecture ,RESEARCH personnel ,EDUCATIONAL objectives - Abstract
Sensors have recently become valuable tools in engineering, providing real-time data for monitoring structures and the environment. They are also emerging as new tools in education and training, offering learners real-time information to reinforce their understanding of engineering concepts. However, sensing technology's complexity, costs, fabrication and implementation challenges often hinder engineers' exploration. Simplifying these aspects could make sensors more accessible to engineering students. In this study, the researcher developed, fabricated, and tested an efficient low-cost wireless intelligent sensor aimed at education and research, named LEWIS1. This paper describes the hardware and software architecture of the first prototype and their use, as well as the proposed new versions, LEWIS1-β and LEWIS1-γ, which simplify both hardware and software. The capabilities of the proposed sensor are compared with those of an accurate commercial PCB sensor. This paper also demonstrates examples of outreach efforts and suggests the adoption of the newer versions of LEWIS1 as tools for education and research. The authors also investigated the number of activities and sensor-building workshops that have been conducted since 2015 using the LEWIS sensor, showing an increasing trend in the excitement of people from various professions to participate and learn sensor fabrication. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
32. A Platform for Integrating Internet of Things, Machine Learning, and Big Data Practicum in Electrical Engineering Curricula.
- Author
-
Jayachandran, Nandana, Abdrabou, Atef, Yamane, Naod, and Al-Dulaimi, Anwer
- Subjects
ENGINEERING students ,MACHINE learning ,ENGINEERING education ,GRAPHICAL user interfaces ,ENGINEERING design - Abstract
The integration of the Internet of Things (IoT), big data, and machine learning (ML) has pioneered a transformation across several fields. Equipping electrical engineering students to remain abreast of the dynamic technological landscape is vital. This underscores the necessity for an educational tool that can be integrated into electrical engineering curricula to offer a practical way of learning the concepts and the integration of IoT, big data, and ML. Thus, this paper offers the IoT-Edu-ML-Stream open-source platform, a graphical user interface (GUI)-based emulation software tool to help electrical engineering students design and emulate IoT-based use cases with big data analytics. The tool supports the emulation or the actual connectivity of a large number of IoT devices. The emulated devices can generate realistic correlated IoT data and stream it via the message queuing telemetry transport (MQTT) protocol to a big data platform. The tool allows students to design ML models with different algorithms for their chosen use cases and train them for decision-making based on the streamed data. Moreover, the paper proposes learning outcomes to be targeted when integrating the tool into an electrical engineering curriculum. The tool is evaluated using a comprehensive survey. The survey results show that the students gained significant knowledge about IoT concepts after using the tool, even though many of them already had prior knowledge of IoT. The results also indicate that the tool noticeably improved the students' practical skills in designing real-world use cases and helped them understand fundamental machine learning analytics with an intuitive user interface. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
33. A tutorial for integrating generative AI in mixed methods data analysis.
- Author
-
Combrinck, Celeste
- Subjects
GENERATIVE artificial intelligence ,CHATGPT ,ENGINEERING students ,CHATBOTS ,MIXED methods research - Abstract
The current article used real data to demonstrate the analysis and synthesis of Mixed Methods Research (MMR) data with generative Artificial Intelligence (Gen AI). I explore how reliable and valid Gen AI data outputs are and how to improve their use. The current content is geared towards enhancing methodological application regardless of field or discipline and includes access to a prompt library and examples of using outputs. The demonstration data used emanated from a study done in South Africa, with a quantitative sample size of 969 first-year engineering students and, for the qualitative part, 14 first-year students. In the current article, I compare my original analysis to ChatGPT results. Generative AI as a mind tool is best used with human insight, and I found this to be especially true when coding qualitative data. ChatGPT produced generic codes if asked to do inductive coding, and the results improved when training the Gen AI on human examples, which led to moderate and significant correlations between human and machine coding. The quantitative analysis was accurate for the descriptive statistics, but the researcher had to use best judgment to select the correct inferential analysis. Quantitative and qualitative analysis should be conducted separately in generative AI before asking the Chatbot for help with mixed methods results. In the current paper, I give guidelines and a tutorial on how to use chatbots in an ethically responsible and scientifically sound manner for research in social and human sciences. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
34. Introduction to the special section: Policy papers from the 2021 Washington Internships for Students of Engineering internship program.
- Author
-
Summey‐Rice, Jami and Yuengling, Heather
- Subjects
INTERNSHIP programs ,ENGINEERING students ,SUSTAINABILITY - Abstract
Being a WISE intern has kept Ms. Rice involved with AIChE post-graduation. Jami Summey-Rice was a 2015 AIChE sponsored WISE intern. [Extracted from the article]
- Published
- 2022
- Full Text
- View/download PDF
35. The study of grit in engineering education research: a systematic literature review.
- Author
-
Direito, Inês, Chance, Shannon, and Malik, Manish
- Subjects
ENGINEERING education ,EDUCATION research ,META-analysis ,HIGHER education ,ENGINEERING students - Abstract
Research on the role of grit – defined as both perseverance and passion for long-term goals – on human performance has been conducted for the past decade. It has been suggested that this non-cognitive factor is a better predictor of students' retention than traditional academic measures. These findings hold relevance for engineering education research but studies on this area are still scarce. This paper provides a systematic review of the current state of research on grit and its correlates in engineering higher education research. Publications were identified using three types of databases specific to engineering education; a final set of 31 relevant records was analysed by type of population, methods, research topics and main results. Most of the reviewed studies implemented quantitative methodologies to assess grit and also used one of the two versions of Duckworth's Grit scale. Key findings are that in engineering education research, both the conceptualisation of grit and research reporting procedures have been inconsistent. Such inconsistency hinders interpretation of the impact of grit in engineering education. In response, new research avenues and best practices for reporting are proffered. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
36. A study on Interdisciplinary Curriculum for Mechanical Engineering.
- Author
-
Balarengadurai, C., Surekha, T. P., Shashank N., Chaitra N. C., and Gaurav P. R.
- Subjects
INTERDISCIPLINARY education ,MECHANICAL engineering ,AUTOMOBILE industry ,ENGINEERING students ,COMPUTER engineers - Abstract
This paper describes a study on an interdisciplinary curriculum for mechanical engineering. The interdisciplinary strategy presented in the present research involves departments that haven't typically worked well together to provide learners with capstone design opportunities. Teams of students from the computer and mechanical engineering departments cooperate on completing a capstone design project that gets placements from industry. The method of defining relevant design projects that coordinate with the goals of the mechanical engineering curriculum is comprehensive, as well as the amount of involvement of the industrial partner. To demonstrate the interdisciplinary morality of the design projects and how they fulfil the program's goals and objectives, the automotive sector is examined by the students. Finally, the paper focuses on challenges faced by mechanical engineering students, improve their chances of securing placements and concludes with a model interdisciplinary curriculum. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
37. A design thinking approach to develop entrepreneurial skills in the field of Mechatronics Engineering.
- Author
-
S., Julius Fusic, Rajalakshmi R., Kavitha D., Sugumari T., and Nivetha S.
- Subjects
MECHATRONICS ,DESIGN thinking ,OUTCOME-based education ,ENGINEERING students ,CREATIVE thinking ,ENGINEERING - Abstract
This paper discusses the utilization of design thinking process in the entrepreneurship classes, which involves problem-solving approach, creative thinking and procedural steps to solve the problems. The entrepreneurship training classes facilitate the students to address the real-world problem through the real-world skill development activities. Entrepreneurship education leads the students to develop projects with the outcome as societal beneficial product or service. The students' expertise after attending the class will be incredibly useful for resolving the problems which need an immediate focus like Covid-19 and post pandemic situation. The case study discussed in this paper describes the growth of an engineering student into a technopreneur, who uses design thinking to solve the societal problems. This case study comprises the framework as follows: The first framework is based on Outcome Based Education (OBE) and Choice Based Credit System (CBCS) for Batch 1 and 2, and the second framework with Batch 3 on Conceive Design Implement (CDIO) and Operate framework. According to the findings, students of Batch 3 outperformed than the students of Batch 1 and 2 in applying higher order thinking abilities to turn a prototype into a working business model. As a result, the CDIO framework is ideally suited to the development of engineering abilities into the entrepreneurial opportunities. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
38. OBE Framework for Assessing Laboratory / Practical Courses in Engineering Programmes.
- Author
-
Nandhitha, N. M. and Roslin, S. Emalda
- Subjects
ENGINEERING students ,CLASSROOM environment ,LABORATORIES ,ENGINEERING - Abstract
Irrespective of the branch of study, practical/laboratory courses are integral parts of engineering curriculum. These courses develop the knowledge, skill and attitude of the graduates. It is thus necessary to frame the laboratory experiments, to create a student centric learning environment and to have suitable assessment methodologies to enhance the cognitive, affective and psychomotor skills of the engineering students. This paper proposes a framework of the above three from the authors' perspective for a software laboratory. The proposed framework can be extended to the laboratory/practical with suitable modifications in the Course Outcomes. Also in this paper, a methodology is proposed for converting the scales into marks and also the formula for calculating the marks under various heads (record, viva voce and experiment) is given. Rubrics are defined for the Performance Indicators (PIs) as specified in the Examination Reform Policy of AICTE for the Program Outcomes (POs defined by National Board of Accreditation (NBA), India). [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
39. Issues and Challenges of Implementing Project Based Learning in Engineering Courses: Student and Faculty Perspective.
- Author
-
Venugopala P. S., Ashwini B., P., Shrinivasa Pai, and Aravinda C. V.
- Subjects
STUDENT attitudes ,ENGINEERING students ,TEACHER attitudes ,COLLEGE teacher attitudes ,LEARNING - Abstract
Project Based Learning (PBL) is a concept adopted in higher education that is focused on the mode of learning by implementing projects using the concepts studied during a course. This model is now extended even to middle schools. This paper is a case study on the implementation of PBL in the engineering course. PBL implementation has several issues to be considered before offering it to the students. The issues are more related to the faculty and the institution. A survey was carried out among the students and faculty to know the effectiveness of PBL implementation. A set of questions were asked to the students to know the technical and non-technical advantages and limitations of the PBL. Descriptive questions are used to know the general opinion of the students and faculty about PBL. Various observations are made based on the outcome of the survey. As the overall outcome of the survey, the faculty and students are of the opinion that the PBL will enhance the learning outcome of the course, provided sufficient time and resources are available to implement the project and the faculty can guide the students with regular monitoring of the project's progress. Faculty competency in handling the concepts practically, and availability of time and resources are of concern. Both faculty and students felt that PBL must be practiced in the engineering curriculum to enhance the skills of the student. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
40. Human Health Monitoring System.
- Author
-
G., Pallavi, M., Poornima, S., Lakshmi, T. G., Aditya, G., Pavithra, and Manjunath, T. C.
- Subjects
TECHNOLOGICAL innovations ,ENGINEERING students ,CLOUD storage ,INTERNET of things ,DATA warehousing ,STRUCTURAL health monitoring ,MEDICAL offices - Abstract
The paper presents the design and development of a human health monitoring system that could be used for various types of biomedical engineering applications. Our research paper approaches on how we can monitor our health at any place and any point of time. With an improvement in technology and miniaturization of sensors, there have been attempts to utilize the new technology in various areas to improve the quality of human life. One main area of research that has seen an adoption of the technology is the healthcare sector. As a result, this project is an attempt to solve a healthcare problem currently society is facing. The main objective of the project was to design a remote healthcare system. It's comprised of three main parts. The first part being, detection of patient's vitals using sensors, second for sending data to cloud storage and the last part was providing the detected data for remote viewing. Remote viewing of the data enables a doctor or guardian to monitor a patient's health progress away from hospital premises. The Internet of Things (IoT) concepts have been widely used to interconnect the available medical resources and offer smart, reliable, and effective healthcare service to the patients. Health monitoring for active and assisted living is one of the paradigms that can use the IoT advantages to improve the patient's lifestyle. In this project, we have presented an IoT architecture customized for healthcare applications. The aim of the project was to come up with a Remote Health Monitoring System that can be made with locally available sensors with a view to making it affordable if it were to be mass produced. Hence the proposed architecture collects the sensor data through ESP8266 microcontroller and relays it to the cloud where it is processed and analysed for remote viewing. The work presented in this paper is the mini-project work of the under-graduate students of the engineering college guided by their supervisors. [ABSTRACT FROM AUTHOR]
- Published
- 2023
41. Short Range Motion Detector Droid.
- Author
-
J., Bhuvan, C., Karthik, M. V., Harikrishna, B. N., Hruday, T. G., Aditya, G., Pavithra, and Manjunath, T. C.
- Subjects
MOTION detectors ,RANGE of motion of joints ,HUMAN mechanics ,ENGINEERING students ,ENGINEERING schools ,ROBOTS - Abstract
The paper presents the design and development of a short range motion detector based droid. In this digital and automotive day and age, robotics, and IoT produce an impact on human life. One can't just rely on the traditional mode of work in this era. One has to adapt the robotics and keep digging in it, as it's the near future for humans. So to do this there are many aspects to implement automotive in day-to-day life. One such event is to study a robot that follows humans that means which can detect human movement and react as per this movement. The study shows that there are many researchers, scientists, engineers who have worked and still working to improve this human movement detection in robotics. This paper has studied some of the previous work and gave a comparative analysis of the same. The work presented in this paper is the mini-project work of the under-graduate students of the engineering college guided by their supervisors. [ABSTRACT FROM AUTHOR]
- Published
- 2023
42. The TRIPLE Change Framework: Merging Theories of Intersectional Power, Learning, and Change to Enable Just, Equitable, Diverse, and Inclusive Engineering Education.
- Author
-
SVIHLA, VANESSA, DAVIS, SUSANNAH C., and KELLAM, NADIA N.
- Subjects
ENGINEERING education ,ENGINEERING students ,DIVERSITY & inclusion policies ,ORGANIZATIONAL change ,HIGHER education - Abstract
Background: Despite many calls for change, and especially change aligned to diversity, equity, inclusion, and justice (DEIJ) goals, engineering continues to show disparities in the opportunities, experiences, and outcomes of women and people from groups historically marginalized in these fields. In response, institutions have traditionally used change frameworks to both understand and create reform at program, department, or college levels. However, when aiming at DEIJ goals, change frameworks alone do not lead to the desired transformations of systems. Purpose: In this theoretical paper, we develop an integrated framework that draws from three theoretical domains to guide systemic, equity-focused transformation in engineering education. We argue knowledge from three domains—intersectional power, learning, and change—is necessary to account for and address the complexity of DEIJ change projects. This complexity requires a framework that sheds light on interrelated embodiments of power relations, guidance on how to change, including how and why people learn and engage in new practices. Scope: To illustrate the need for and value of such integration, we examine how prior researchers have used theories of power, change, and learning. In doing so, we present a framework for how integration across these domains can occur. In the domain of change, we identified papers on diffusion of innovations and communities of practice. In learning, we identified papers on distributed practice and legitimate peripheral participation. We examined how these papers utilized critical theories of intersectional power, the third domain, in tandem with these theories. We also explored how the choice of a theory (within the domains) can help or hinder the attainment of systematic, equity-focused transformation. Discussion/Conclusion: We drew the three domains together to consider how these, when integrated in the Theories and Research on Intersectional Power, Learning, and Evolutionary Change (TRIPLE Change) Framework, provide a more comprehensive means to envision, guide, and characterize DEIJ change efforts. By integrating learning, change, and intersectional power theories, we increase the capacity of our analyses of systems and open new possibilities for creating more equitable and just systems. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
43. On the Rocky Road to Academia: Stumbling Blocks for Finnish Engineering Students with English as a Second Language.
- Author
-
Niemelä, Hanna and Naukkarinen, Johanna
- Subjects
ENGLISH as a foreign language ,ENGINEERING students ,FUNCTIONAL linguistics ,ACADEMIC discourse ,LEARNING ,MARINE habitats - Abstract
Communication skills, especially academic writing skills in English, are vital for a successful career in the global scientific community. Finnish engineering students, however, seem to encounter problems when preparing their scientific publications in English as a second language (ESL) for international forums. Thus, these skills should be enhanced at all levels of academic education to promote students' development as experts in their field. The paper describes challenges faced by engineering students in academic writing and seeks solutions to promote students' learning process. In addition to communication issues, the paper enlightens the environment and conditions in which the engineering students operate. By an interpretive study, the paper examines texts written by Finnish engineering students. The qualitative textual analysis is based on Systemic Functional Linguistics. Further, the paper discusses learning of academic writing from the perspective of situated learning. Based on the textual analysis, the paper identifies challenges and problems in academic writing, namely unfamiliarity with publication practices, grammar and terminology problems, unawareness of academic discourse strategies, such as hedging and the use of cohesive devices, and challenges with handling feedback. To enhance students' competences in academic communication within their discipline, guidance and training of communication skills should be integrated into relevant technical and academic contexts throughout the engineering studies. Thus, in addition to thesis writing, argumentation and writing skills and the use of databases can be enhanced for instance by writing course reports in the form of academic papers. Individual consultation also plays a key role in the situated learning process. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
44. Call for Papers Special Issue on Computing in Engineering.
- Subjects
- *
ENGINEERING education , *ENGINEERING students , *SPECIAL events - Abstract
Prospective authors are requested to submit new, unpublished manuscripts for inclusion in the upcoming event described in this call for papers. [ABSTRACT FROM PUBLISHER]
- Published
- 2016
- Full Text
- View/download PDF
45. Cal-SNAME Student received 2004 Graduate Paper Honor Prize of SNAME.
- Author
-
Peri, Juan
- Subjects
HULLS (Naval architecture) ,NAVAL architecture ,ENGINEERING students ,ENGINEERS' associations - Abstract
Reports on the Society of Naval Architecture & Marine Engineers's recognition of University of California-Berkeley engineering students Jean Toilliez and Gregoire Poupard for their paper entitled "Fast evaluators for optimal multi-hull configurations". Outline of the two students' paper.
- Published
- 2005
46. Engaging undergraduate students to analyze the results of published research articles.
- Author
-
Jadhav, H. T. and Kumbhar, S. S.
- Subjects
UNDERGRADUATES ,PUBLISHED articles ,ENGINEERING students ,COMPUTER software ,TECHNICAL education - Abstract
Engineering institutions offer technical education by designing curriculum based on expected graduate attributes. The ability of undergraduate students (UG) to analyze complex engineering problems is one of the attributes and it is addressed by enabling students to work on certain projects or problems. The research experience during undergraduate studies can enhance the overall educational experience of students. But implementing research activities for undergraduate students can be challenging. To engage UG students, researchers have tried different strategies to enhance the research experience of students. This paper presents a case study in which, third-year students of Electrical Engineering were engaged to analyze the results of the combined economic emission dispatch problem (CEED) reported in past literature. As a part of in-semester-examination (ISE) for the course Power System Operation and Control, the students were given different research papers published in reputed international journals and associated with the CEED problem. The students were asked to identify the main equations, collect supporting data from literature and develop a computer program in MATLAB to analyze results in the research article under study. Each student presented findings on the assigned paper, the computer program developed, with explanations and conclusions. The research findings of all students were appropriately consolidated to prepare the manuscript as a review article for submission to a suitable international journal. The proposed methodology can be easily implemented in other courses by properly defining the scope of research work expected from students. The research experience of students (experimental group) was measured by conducting a test and the results were compared with other students (control group). The results show that students under experiment performed better than other students. [ABSTRACT FROM AUTHOR]
- Published
- 2022
47. Activities of Listening Skill in Conjunction with Speaking Help Enhancing Language Competence of Engineering Graduates.
- Author
-
Mahapatra, Bishnu Paramguru
- Subjects
LISTENING skills ,ACTIVE listening ,ENGLISH as a foreign language ,ENGINEERING students ,ENGINEERING schools - Abstract
Proficiency in speaking cannot be acquired without effective listening. Listening and speaking skills are deciding factors for academic growth of engineering students. Engineering students are mostly worried about their placement in top notch companies, thereby they keep on emphasizing more on speaking under the presumption that speaking can be acquired without active listening. They treat listening skill as the secondary skill for acquisition of speaking, which requires special attention by the teacher. Productive skill speaking and receptive one listening are invariably playing a pivotal role for human communication. Second language users of English generally get confused with the incompatibility of writing, speech production and aural skill in English. Receptive skill Listening and Productive skill speaking are incompatible to one another. The prime objective of this paper is to find out whether integrated listening and speaking activities help in developing language competence of engineering graduates or the task and activities of listening and speaking should be done in isolation to achieve the competence of the students in English language. The present paper collected data of different tests namely pre-test and post-test based on different tasks and activities intended for the engineering graduates of an engineering college and the same was analyzed and the result found at the end of the exposition of data revealed that engineering graduates those who practiced activities of listening and speaking in conjunction with one another proved to be successful in acquiring English language competence than the others who practiced the activities of listening and speaking in separation. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
48. A Proposed Case-Based Learning Framework for Fostering Undergraduate Engineering Students' Creative and Critical Thinking.
- Author
-
Lavi, Rea and Marti, Deniz
- Subjects
CASE-based reasoning ,CREATIVE thinking ,CRITICAL thinking ,ENGINEERING students ,LEARNING - Abstract
Scholars and international bodies have highlighted the need to foster undergraduate engineering students' creative thinking and critical thinking. Case-based learning is a name for a host of pedagogical approaches which are student-centered, requiring the instructor to act as an expert guide rather than as a source of knowledge. These approaches make use of cases, thus contextualizing learning of discipline or practice-specific knowledge. This approach can help facilitate students' development of conceptual understanding and thinking skills, as students work through and reflect on the process of solving cases. Despite the learning benefits of case-based learning, it has not often been implemented in undergraduate engineering education when compared with project- or problem-based learning. This paper outlines our proposal for a case-based learning pedagogical framework which aims to foster undergraduate engineering students' creative and critical thinking. The framework provides scaffolding of the learning process for students using a sequence of case-based learning implementations with varying levels of student autonomy. We begin by providing a theoretical background on problem-solving in engineering, creative thinking, and critical thinking, followed by a review of case-based learning in undergraduate engineering education. Next, we outline our proposed pedagogical framework, including guidelines for instructional design and implementation, as well as practical examples. We then discuss the contributions and limitations of our work. Finally, we discuss potential challenges associated with the implementation of our framework and potential mitigations. This work offers theoretical and practical contributions for developing undergraduate engineering students' creative and critical thinking. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
49. Use of a Gamified Platform to Improve Scientific Writing in Engineering Students.
- Author
-
Núñez-Pacheco, Rosa, Vidal, Elizabeth, Castro-Gutierrez, Eveling, Turpo-Gebera, Osbaldo, Barreda-Parra, Aymé, and Aguaded, Ignacio
- Subjects
TECHNICAL writing ,ENGINEERING students ,EXPERIMENTAL groups ,TEACHING methods ,SATISFACTION - Abstract
The general purpose of this study was to determine the potential of using a gamified platform in the development of scientific writing skills among engineering students at a Peruvian university. To this end, a gamified web platform named Call for Papers for Engineers was designed. This platform contains mini-games focused on developing reading and writing skills for articles related to the engineering area. A quantitative methodological approach was employed, with a quasi-experimental design involving two groups: an experimental group and a control group, with pre-and post-test measurements. Additionally, the gamified platform was validated through expert judgment, and user satisfaction levels were assessed. The main results indicate that the content developed in the course and the use of the gamified web platform were effective teaching methods, as the students in the experimental group demonstrated higher performance after using the gamified platform compared to the control group. Furthermore, participants in the study expressed satisfaction with the use of this technological resource, finding it motivating and user-friendly. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
50. The impact of digital library resources usage on engineering research productivity: an empirical evidences from Pakistan
- Author
-
Khan, Amjid, Ahmed, Shamshad, Khan, Asad, and Khan, Ghalib
- Published
- 2017
- Full Text
- View/download PDF
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.