Search

The present research refers to the assigning of a hands-on group project to freshman engineering students, evaluating their performance, and deriving conclusions on student benefits and educational advances. The research procedure included action plans for the instructor and the students, instructions to the students on performing the work, organizational instructions to the teams and reporting guidelines, and evaluation of the success of the project. The main outcomes refer to the team co-operation, the performance of tasks, the quality of results and the reporting effectiveness. The "paper beam" project benefited the student's learning and proved the need of complementary learning styles in teams, of the appreciation of quality performance and results, as well as of the accuracy in project details. (Contains 3 tables and 1 figure.)

Oral communication skills are essential for engineers today and, as they are included in accreditation criteria of educational programmes, their teaching and evaluation deserve attention. However, concrete aspects as to what should be taught and evaluated in relation to oral communication skills have not been sufficiently established. In this paper, a method to aid the efficient teaching of oral presentation skills is proposed, from the presentation structure level to word and sentence level choices, through the use of JECPRESE, The Japanese-English Corpus of Presentations in Science and Engineering. As of June 2012, the corpus is composed of transcriptions of 74 presentations delivered in Japanese by students graduating from the Master's programme of various engineering departments and 31 presentations delivered in English, 16 by experienced researchers at an international conference on chemistry, and 15 by undergraduate engineering students of a mid-sized American university. The utterances were classified according to the specific moves (sections of the speech that express specific speaker intent) appearing in the presentations and frequently used words/expressions to express these moves were identified. (Contains 1 figure and 1 table.)

Findings are presented from a series of moderated interactive sessions held at international engineering education conferences between July 2007 and December 2008, where attendees discussed the current state and future trajectory of engineering education research. More specifically, this study examines how session attendees described: (1) the relationship between engineering education research and educational practice, policy considerations and industry; (2) important stakeholders, mechanisms/strategies and challenges for relating research to practice, policy and industry. Thematic analysis and open coding procedures were used to analyse the data collected at each session. In summary, frequent discussion and widespread consensus was observed about the need to relate engineering education research to the practice of engineering teaching. Discussions about relating research to policy and industry remain formative, but appear to be gaining traction. The paper concludes by proposing a cyclic model to better conceptualise how engineering education research can be strategically related to practice, profession and industry across diverse local and global contexts. (Contains 5 tables and 2 figures.)

Empirical research on practicing engineers can inform engineering education as it provides evidence for what engineering students ought to learn. Whilst there has been a growing interest and scholarship in this area, there has not been any systematic attempt to map the empirical research on practicing engineers and develop an agenda for research on engineering practice. To address this gap, we conducted a mapping review of empirical research studies of practicing engineers. We limited our search to studies published in peer-reviewed journal articles since 2000 and identified 187 papers. We used inductive content analysis to categorise the papers into five research themes: (1) learning in the workplace, (2) competencies and attributes needed for practice, (3) activities undertaken by engineers, (4) diversity, and (5) engineers' identity. For each theme, we report common findings and gaps that can inform future research.

Writing practices are seen to be essential for professional engineers, yet many engineering students and academics struggle with written communication, despite years of interventions to improve student writing. Much has been written about the importance of getting engineering students to write, but there has been a little investigation of engineering academics' perceptions of writing practices in the curriculum, and the extent to which these practices are visible to their students and to the academics. This paper draws on research from an ongoing study into the invisibility of writing practices in the engineering curriculum using a practice architectures lens. The paper uses examples from the sites of practice of two participants in the study to argue that prevailing practices in engineering education constrain more than enable the development and practice of writing in the engineering curriculum.

Engineering education has traditionally focused on the development of technical skills and knowledge. Nowadays, the need for educating engineers in non-technical skills, such as reflective thinking, is being recognised internationally. This paper proposes that socio-cultural impacts of technology be studied together with the technology itself through the integration of social awareness modules into advanced technical courses, providing a venue for students to exercise their reflective thinking skills in the context of technologies that are of interest to them. The paper presents an exploratory study of the essays of senior year engineering students on the socio-cultural impacts of computer vision technologies. It provides insights on the themes that are of interest to the students and on the students' strengths and weaknesses relating to their reflective thinking abilities. Similar modules would apply well to other advanced courses in the engineering curriculum, to help contextualise technology and enhance the reflective abilities of engineering graduates.

This position paper sets out to examine value creation in the engineering enterprise, a process that has mostly been associated with innovation and entrepreneurs. An analysis of the literature on engineering value creation in business studies, engineering and engineering education publications shows that there has been surprisingly little empirical study and thus the means by which most engineers contribute value is unclear in the literature. Analysis of published data and data from studies by the authors in engineering workplaces in Australia, South East Asia and Portugal suggests that the work performed by most engineers has little to do with innovation. Based on these data the authors identify 14 ways in which engineers create value. An important finding is that routine engineering performances by a majority of engineers, not associated with innovation or entrepreneurial activities, not only can be shown to create value, but also to protect accumulated value from inadvertent destruction. The paper outlines the educational implications of these findings and proposes measures that engineering educators can adopt to improve the understanding of engineering graduates about engineering value creation.

This is a 'position paper' elaborated by Working Group 2 (wg2) 'Quality and Recognition in Engineering Education' of the EU-supported Thematic Network 'Higher Engineering Education for Europe' (H3E), operative from January 1997 to July 1999. G. Heitmann was the Rapporteur, and G. Augusti the Chairman of wg2. Before approval at the H3E final Congress in Budapest (July 1999), the paper had been discussed at several wg2 and public meetings. [ABSTRACT FROM AUTHOR]

It is well documented that engineering practice is as much social as it is technical. Providing accurate course mapping and supporting teaching staff to scaffold engineering practice learning through whole of programme curriculum are key challenges. This study proposes a conceptual framework for engineering professional practice in an Australian context that is constructed through the triangulation of data collected from practitioner perspectives, literature, and reflection upon both authors' industry experiences. This employability skill development framework describes six key themes as graduate-level learning outcomes aligned to Australian accreditation requirements in a format that readily supports explicit inclusion of engineering professional practice in curriculum design. These key themes are illustrated along a continuum of personal, interpersonal, and contextual competencies and attitudes to communicate the interrelated nature of engineering employability skills. While this paper does not attempt to propose a universal framework, its potential broader relevance, future refinement, and evaluation are discussed.

This paper explores the associations between math-gender stereotypes and two dimensions of student engagement -- class engagement and disengagement -- among Russian engineering students. The data collected in three Russian universities (n = 2,074) were utilised. Structural equation modelling was employed to test hypotheses about relationships between key variables and their variations for male and female subsamples. We revealed that the students' attribution of math-gender stereotypes to faculty slightly decreased class engagement and increased disengagement for both male and female students. Therefore, we hypothesise that male students can be more overconfident about their future performance in exams on math-related subjects because of a better reputation in the eyes of instructors, which can result in less engagement and, as a consequence, lower academic outcomes. These findings demonstrate the high importance of faculty in encouraging engineering student engagement and providing a bias-free learning environment.

The term 'global responsibility' projects a holistic sense of ethics, sustainability, and obligation. To achieve the long-term viability of human life on Earth, civil engineering must be conducted in increasingly responsible ways, and civil engineers must value and enact global responsibility in their work. Interviews conducted with nine civil engineers in London provide insight regarding engineers' familiarity with the term, how they learned about it, what opportunities and barriers they face, and what might be done by professional and educational institutions to help them practice more responsibly. Results indicate: the term itself is novel but underlying concepts are not; continuing professional development has played a crucial role in their understanding; material selection and Health & Safety represent primary avenues for contributing responsibly at work. This paper provides advice to professional institutions regarding transparencies, procedures, and metrics to enhance the UK workplace and ideas for educational institutions preparing engineering students for practice.

Increasing digitisation of engineering and social practices has altered the relationship between formal schooling and development of expertise for professional engineering work. What does the development of expertise look like when knowledge is generated and shared at an accelerated pace due to shifts in technology? In this paper, I present case studies of two early career software engineers. Using methodological insights from digital ethnography, I trace their professional journeys over two decades. I empirically demonstrate how the development of engineering expertise is a continuous and perpetual endeavour and engineers learn throughout their lives (lifelong) and across all the different spaces they inhabit at any given time (lifewide). I argue for extending engineering work practices research and research in engineering education more broadly to take larger timescales of learning into account to build a comprehensive understanding of engineering expertise development.

The present research refers to the assigning of a hands-on group project to freshman engineering students, evaluating their performance, and deriving conclusions on student benefits and educational advances. The research procedure included action plans for the instructor and the students, instructions to the students on performing the work, organizational instructions to the teams and reporting guidelines, and evaluation of the success of the project. The main outcomes refer to the team co-operation, the performance of tasks, the quality of results and the reporting effectiveness. The ‘paper beam’ project benefited the student’s learning and proved the need of complementary learning styles in teams, of the appreciation of quality performance and results, as well as of the accuracy in project details. [ABSTRACT FROM AUTHOR]

The objective of this study is to identify the competencies required to achieve success in the transition from higher education to the labour market based on the perceptions of employers. This paper analyses the assessments made by a group of engineering company employers. An item-battery of 20 competencies was grouped into 3 dimensions by using factor analysis. Subsequently, respondents' scores were also clustered into three groups and characterised through contingency tables. The competencies demanded by employers were grouped into business and finance, problem-solving and strategic planning. Significant differences were found between responses from employers working in medium and small companies, who placed more importance on competencies related to problem-solving and strategic planning, and employers in big companies, who were more concerned about the difficulties of finding well-trained graduates. The findings from this paper have important implications for research in the areas of higher education and organisations that usually employ graduate engineers.

In this paper, we present a range of formative assessment types for engineering mathematics, including in-class exercises, homework, mock examination questions, table quizzes, presentations, critical analyses of statistical papers, peer-to-peer teaching, online assessments and electronic voting systems. We provide practical tips for the implementation of such assessments, with a particular focus on time or resource constraints and large class sizes, as well as effective methods of feedback. In addition, we consider the benefits of such formative assessments for students and staff.

Engineering and technology have a central role in shaping our reality that frequently goes unnoticed or not critically analyzed by engineers and engineering faculty and curricula. In so doing, the engineering that is taught, investigated (and improved), and practiced can unwittingly foster an ethical-political reality with which many engineers and engineering teachers may disagree. In this paper, drawing on literature from philosophy and sociology of technology and Latin-American liberating and decolonial traditions, the theoretical bases for a different engineering practice are set; an engineering committed to empowering people and constructing with them other possible socio-technical orders (and ethical-political realities). It can be called decolonial engineering. Then, grassroots (or popular) engineering, as it is practiced, taught, and improved (investigated) by some Brazilian university extension centres and groups, is presented and analyzed according to its decolonial foundations and outcomes. Finally, from grassroots engineering experience, some general traits of decolonial engineering education and research are derived.

This paper addresses the role of engineering PhD education and its relationship to innovation and technology, and the need to reconsider how we educate PhD engineers. Much of the effort on engineering education in the last two decades focused on undergraduate education with a few exceptions that relate to master degree programs. Doctoral education in engineering prepares the next generation faculty, researchers, and technology leaders and warrants our attention. Whilst current education has been largely responsible for technological advances, there is a need for a new model of engineering PhD education that prepares renaissance engineers. This paper focuses on the doctoral education and its role in the USA; however, the issues addressed are universal among the countries that offer PhD degrees in engineering. (Contains 3 tables and 28 notes.)

In the present paper we question how engineering education (and engineering) can support greater participation and inclusiveness in decision making and science and technology. We consider the work "relating" to engineering and society that is conducted by the scholars of science and technology studies, but which is rarely read or considered by the engineering educators who could draw on it. We consider the results of an initial analysis of data collected from interviews with the science, technology and society (STS) faculty across North America and Europe. STS looks at how technology affects society and how society affects technology, while engineers "create" technology. Consequently the current authors suggest that it would be of great relevance to both engineering and STS to join up the thinking across these two arenas by focusing on a question that is not privy to the disciplines: is how can we create a socially just and sustainable future for all? We shall consider questions asked in STS of technology (engineering), e.g. what is its impact on society, who owns the technology, what are the political artefacts of the technology and we consider their influence on engineering (education). Using a phenomenographic approach to the research, 12 categories of description have emerged. Three of these categories are highlighted in this paper: participation; politics and policy; and citizenship, as they reflected themes that are rarely "discussed" in engineering curricula but which appear to be uppermost in the STS arena. Participation was described in a range of ways, from approaches to participation to the case for and against it. In politics and policy much was made of the interplay between scientists and politicians and the power and knowledge games between these two arenas. Citizenship is a hotly discussed topic and is evident in a number of government agendas. Approaches to enhancing citizenship are discussed in a myriad of ventures, e.g. through public participation, being critical of information and through education. (Contains 1 figure.)

This paper moves beyond the competence focus of mainstream value engineering training (e.g. Miles 1989, "Techniques of Value Engineering and Value Analysis"; Kaufman 1990, "Value Engineering for the Practitioner"), such books achieve their training goal well but lack the pedagogic aim we argue in this paper. This paper achieves our aim by describing the philosophical linkage between value engineering, function analysis and innovation and the economic imperative businesses bring to modes of engineering consideration. This philosophical underpinning uses Heidegger's attack on Descartes' "I think therefore I am" and the assumptions such logic brings to the central question of an individual existence among the existences of everything else. Rather than singularly focusing on "what" or "that", Heidegger calls upon us to consider "how and why" as a product of ontological functioning. However, we do not seek to replace Cartesian rationalism with Heidegger's phenomenological methods, as the latter does have several aspects we disagree with. We argue for their mutual inclusion, something Heidegger would argue against, to enable systematic modes of considering "know-that" and "know-how" in an informed and objective approach to managing innovation and engineering epistemology. Value engineering is offered as a means to enhance the way we teach our students how to innovate and make them aware of the dangers of thinking man-made or artificial-technology is superior to an all-embracing natural or ontological-technology. (Contains 1 note.)

With the increasing challenges facing professional engineers working in more complex, global and interdisciplinary contexts, different approaches to understanding how engineers practice and learn are necessary. This paper draws on recent research in the social sciences from the field of workplace learning, to suggest that a practice-theory perspective on engineers' professional learning is fruitful. It shifts the focus from the attributes of the individual learner (knowledge, skills and attitudes) to the attributes of the practice (interactions, materiality, opportunities and challenges). Learning is thus more than the technical "acquisition" and "transfer" of knowledge, but a complex bundle of activities, that is, social, material, embodied and emerging. The paper is illustrated with examples from a research study of the learning of experienced engineers in the construction industry to demonstrate common practices--site walks and design review meetings--in which learning takes place.

This paper examines the traditional engineering-based provision delivered to Product Design and Technology (B.Sc.) undergraduates at the Loughborough Design School and questions its relevancy against the increasing expectations of industry. The paper reviews final-year design projects to understand the level of transference of engineering-based knowledge into design practice and highlights areas of opportunity for improved teaching and learning. The paper discusses the development and implementation of an integrated approach to the teaching of Mechanics and Electronics to formalise and reinforce the key learning process of transference within the design context. The paper concludes with observations from the delivery of this integrated teaching and offers insights from student and academic perspectives for the further improvement of engineering-based teaching and learning.

Laboratories are generally regarded as critical to engineering education, and yet educational institutions face significant challenges in developing and maintaining high-quality laboratory facilities. Remote laboratories are increasingly being explored as a partial solution to this challenge, with research showing that--for the right learning outcomes--they can be viable adjuncts or alternatives to conventional hands-on laboratories. One consequential opportunity arising from the inherent support for distributed access is the possibility of cross-institutional shared facilities. While both technical feasibility and pedagogic implications of remote laboratories have been well studied within the literature, the organisational and logistical issues associated with shared facilities have received limited consideration. This paper uses an existing national-scale laboratory sharing initiative, along with a related survey and laboratory sharing data, to analyse a range of factors that can affect engagement in laboratory sharing. The paper also discusses the implications for supporting ongoing laboratory sharing.

The authors, citations and content of "European Journal of Engineering Education" ("EJEE") and "Journal of Engineering Education" ("JEE") in 1973 ("JEE," 1975 "EJEE"), 1983, 1993, 2003, and available 2013 issues were analysed. Both journals transitioned from house organs to become engineering education research (EER) journals, although "JEE" transitioned first. In this process the number of citations rose, particularly of education and psychology sources; the percentage of research articles increased markedly as did the number of reference disciplines. The number of papers per issue, the number of single author papers, and the citations of science and engineering sources decreased. "EJEE" has a very broad geographic spread of authors while "JEE" authors are mainly US based. A "silo" mentality where general engineering education researchers do not communicate with EER researchers in different engineering disciplines is evident. There is some danger that EER may develop into a silo that does not communicate with technically oriented engineering professors.

This paper reports on findings from a three-year study of project-based learning implemented in the first year of the Industrial Engineering and Management programme, at the University of Minho, Portugal. This particular model was inspired on project-led education (PLE), following Powell and Weenk's [2003. "Project-Led Engineering Education." Utrecht: Lemma] work. It aims to analyse students' perceptions of PLE as a learning device and its implications for faculty and students' role in teaching and learning. Data collection took place in two phases through individual surveys and focus groups to students. Findings suggest the importance of PLE as a device to enhance meaningful learning and provide evidence from students that it helps to increase their engagement in learning. Implications of PLE for faculty and students role in teaching and learning will be discussed in the paper.

While highly cohesive groups are potentially advantageous they are also often correlated with the emergence of knowledge and information silos based around those same functional or occupational clusters. Consequently, an essential challenge for engineering organisations wishing to overcome informational silos is to implement mechanisms that facilitate, encourage and sustain interactions between otherwise disconnected groups. This paper acts as a primer for those seeking to gain an understanding of the design, functionality and utility of a suite of software tools generically termed social media technologies in the context of optimising the management of tacit engineering knowledge. Underpinned by knowledge management theory and using detailed case examples, this paper explores how social media technologies achieve such goals, allowing for the transfer of knowledge by tapping into the tacit and explicit knowledge of disparate groups in complex engineering environments. (Contains 3 tables.)

Recent studies have argued a shift of thinking about engineering practice from a linear conception to a system understanding. The complexity of engineering practice has been thought of as the root of challenges for engineers. Moreover, creativity has been emphasised as one key capability that engineering students should master. This paper aims to illustrate deeply why engineering education needs to foster creative students to face the challenges of complex engineering work. So a literature review will be provided by focusing on the necessity of developing creativity in engineering education. As the literature demonstrates, this paper reveals the understanding of complexity in engineering practice and the roles of creativity in engineering practice. In addition, the barriers to creativity in current engineering education and some implications of pedagogic strategies will be discussed. So this paper contributes to rethinking the engineering profession in a social context and a link between creativity research and engineering education.

This paper presents an investigation of how experience-led content in an engineering degree can be strengthened by creating opportunities for engineering students to benefit from the knowledge, skills and resources of students with current professional experience. Students who study civil engineering part-time at Coventry University (while also working in the industry) are being used as mentors for full-time students, and careful attention is being paid to the input they can make to group project work. This paper reviews the results of evaluations of these two initiatives. The clearest enhancement to learning provided by the part-time students in these settings is the access they provide for the full-time students to real examples and the provision of actual physical artefacts such as drawings, photos, example documents and templates. Full-time students also gain an awareness of the value of the professional skills. The study confirms the value of these initiatives and points to future improvements. (Contains 3 tables.)

This paper reports on some findings from the first year of a three-year longitudinal study, in which seventh- to ninth-graders were introduced to engineering education. Specifically, the paper addresses students' responses to an initial design activity involving bridge construction, which was implemented at the end of seventh grade. This paper also addresses how students created their bridge designs and applied these in their bridge constructions; their reflections on their designs; their reflections on why the bridge failed to support increased weights during the testing process; and their suggestions on ways in which they would improve their bridge designs. The present findings include identification of six, increasingly sophisticated levels of illustrated bridge designs, with designs improving between the classroom and homework activities of two focus groups of students. Students' responses to the classroom activity revealed a number of iterative design processes, where the problem goals, including constraints, served as monitoring factors for students' generation of ideas, design thinking and construction of an effective bridge. (Contains 2 figures and 1 table.)

Student success is among the most widely researched areas in tertiary education. Generalisability of research in this field is problematic due to cultural and structural differences between countries, institutions and programmes where the research is done. Engineering education in the Netherlands has not been studied in depth. In this paper, outcomes of studies done outside and inside engineering and outside and inside the Netherlands are discussed to help understand the complexity of student retention issues. Although generalisation is an issue, there are a number of concepts and variables that surface in many of these studies, including students' background and disposition variables, education attributes, variables concerning educational climate and student behaviour. How these variables are related and how a university can apply the outcomes of research in this field of study are discussed in this paper. (Contains 1 table, 3 figures and 2 notes.)

Reverse engineering (RE) is the process of testing and analysing a system or a device in order to identify, understand and document its functionality. RE is an efficient tool in industrial benchmarking where competitors' products are dissected and evaluated for performance and costs. RE can play an important role in the re-configuration and redesign of legacy and/or undocumented systems. It can also play a key role in helping students understand engineering products. This paper presents the Philadelphia University experience in constructing a RE course and integrating it within the engineering curricula. This paper can be used as a guide to other universities that wish to introduce RE to their curricula. The information provided in this paper covers the RE methodology for a system level, as well as mechanical, electronics and software levels. Finally, samples of student projects are presented in order to show the learning capabilities provided throughout the course. (Contains 4 tables and 6 figures.)

While experiential learning has been increasingly explored and adopted by higher education institutions, few have researched the appropriate assessment methods that can be aligned with the learning outcomes of experiential learning. A literature review on the diverse forms of assessment currently used for community service types of experiential learning in higher education is presented in this paper to review their appropriateness in assessing experiential learning. The paper also describes the assessment framework of the University of Hong Kong Sichuan Reconstruction Community Service Project, which is incorporated into a multidisciplinary community service learning project. Feedback from students and teachers are reviewed to gauge their preferences towards these assessments, as well as their opinions on assigning academic credits to experiential learning projects. (Contains 2 tables.)

There is mounting evidence to show that engineers need more than technical skills to succeed in industry. This paper describes a curriculum innovation in which so-called "soft" skills, specifically inter-personal and intra-personal skills, were integrated into a final year mining engineering course. The instructional approach was designed to promote independent learning and to develop non-technical skills, essential for students on the threshold of becoming practising engineers. Three psychometric tests were administered at the beginning of the course to make students aware of their own and their classmates' characteristics. Substantial prescribed reading assignments preceded weekly group discussions. Several projects during the course required team work skills and application of content knowledge to real-world contexts. Results obtained from students' reflection papers, assignments related to "soft" skills and end of course evaluations suggest that students' appreciation of the need for these skills, as well as their own perceived competence, increased during the course. Their ability to function as independent learners also increased. (Contains 2 figures.)

This paper presents data from a project that aims to determine the level of knowledge and understanding of engineering students about sustainable development (SD). The data derive from a survey completed by final year engineering students in three Irish Higher Education Institutions. This paper is part of a larger study that examines the relationship between students' and teachers' understanding of SD. The results from the survey show that final year engineering students' knowledge is deficient. The majority of the participants fail to acknowledge the complexity of the concept and focus on environmental protection. Their knowledge of legislation relevant to SD and the social aspect of sustainability is particularly deficient. (Contains 3 tables and 3 figures.)

Critical thinking is a graduate attribute that many courses, including engineering courses, claim to produce in students. As a graduate attribute it is seen by academics as a particularly desirable outcome of student learning and is said by researchers to be a defining characteristic of university education. However, how critical thinking is understood and defined varies quite significantly between disciplines. The paper describes a series of in-depth, semi-structured interviews with academics involved in teaching and learning in a number of disciplines, including engineering. The objective of these interviews is to look at how different disciplines define critical thinking and how they teach critical thinking in their courses. The paper also describes how an analysis of student work and module descriptors has led to the development of a model of critical thinking that can be used across disciplines. (Contains 2 tables.)

Despite sustained efforts to promote engineering careers to young women, it remains the most male-dominated academic discipline in Europe. This paper will provide an overview of UK data and research on women in engineering higher education, within the context of Europe. Comparisons between data from European countries representing various regions of Europe will highlight key differences and similarities between these nations in terms of women in engineering. Also, drawing on qualitative research the paper will explore UK students' experiences of gender, with a particular focus on the decision to study engineering and their experiences in higher education. (Contains 7 notes, 2 tables, and 2 figures.)

The paper presents a new approach for a bachelor-level curriculum structure in engineering. The approach is called DAS formalism according to its three phases: description, analysis and synthesis. Although developed specifically for process and environmental engineering, DAS formalism has a generic nature and it could also be used in other engineering fields. The motivation for this new curriculum structure originates from the urge to solve the problems that engineering education has faced during the past decades, e.g. student recruitment problems and dissatisfactory learning outcomes. The focus of this paper is on the structure of the curriculum but the content is also discussed when it has an effect on the structure and its implementation. The presented structure, i.e. DAS formalism, builds upon the ideas of some classical pedagogical theories, which have regularly been applied at course level but seldom used to solve curriculum-level issues. (Contains 2 tables and 1 figure.)

This paper reports on the role of the current student experience questionnaire in gaining student views on their educational experiences while studying at a research-intensive university in Australia. In particular, the paper focuses on the experiences of engineering students. The paper goes on to examine the areas of best practice and those identified for improvement by students. A number of areas identified by engineering students as needing improvement fall within the teaching dimension; in particular, issues relating to feedback to students and clarity of explanation. Finally, the paper outlines some of the actions that have been taken by the university and the Faculty of Engineering based on the results. (Contains 2 tables and 1 figure.)

In May 2008, the worst earthquake in more than three decades struck southwest China, killing more than 80,000 people. The complexity of this earthquake makes it an ideal case study to clarify the intertwined issues of ethics in engineering and to help cultivate critical thinking skills. This paper first explores the need to encourage engineering ethics within a cross-cultural context. Next, it presents a systematic model for designing an engineering ethics curriculum based on moral development theory and ethic dilemma analysis. Quantitative and qualitative data from students' oral and written work were collected and analysed to determine directions for improvement. The paper also presents results of an assessment of this interdisciplinary engineering ethics course. This investigation of a disaster is limited strictly to engineering ethics education; it is not intended to assign blame, but rather to spark debate about ethical issues. (Contains 2 tables and 1 figure.)

Technology advancement and human needs have led to integration among many engineering disciplines. Mechatronics engineering is an integrated discipline that focuses on the design and analysis of complete engineering systems. These systems include mechanical, electrical, computer and control subsystems. In this paper, the importance of teaching mechatronic system design to undergraduate engineering students is emphasised. The paper offers the collaborative experience in preparing and delivering the course material for two universities in Jordan. A detailed description of such a course is provided and a case study is presented. The case study used is a final year project, where students applied a six-stage design procedure that is described in the paper. (Contains 12 figures and 2 tables.)

This paper presents a game of industrialisation, based on a paper airplane, that mimics real world production ramp-up and blends classical engineering courses together. It is based on a low cost product so that it can be mass produced. The game targets graduate students and practitioners in engineering fields. For students, it offers an experiment in which methods learned in separate courses can be applied. For practitioners, it affords an opportunity to engage in reflexive practices related to industrialisation. Both students and practitioners are able to experience integrated management, required by industrialisation, in a controlled environment: the laboratory. (Contains 5 tables and 4 figures.)

This synthesis paper explores current leadership training in science, technology, engineering and mathematics (STEM) education in Bulgaria. The analysis begins with discussion of global factors influencing the implementation of leadership training in STEM education in general and then presents information about the current status of leadership training in Bulgaria with emphases on the country's economics, politics and geographical location as specific factors influencing leadership education. A short background of Bulgaria is presented with regard to population, gross domestic product, educational system, engineering force and possible need for leaders in industry in Bulgaria and the European Union. The paper provides an overall view about the current status of leadership training in all Bulgarian universities offering STEM education and concentrates specifically on two major universities by examining their currently offered programmes. As part of the discussion, similar training elements in other European countries and the USA are presented. (Contains 1 table.)

This paper focuses on the issue of how engineering programmes demand and/or promote argumentative reasoning, which is a subsequent aspect of curricular development. This was the main objective of the project on which this paper reports. This is to say that the focus is on assessment as a way to establish to what extent argumentative reasoning is demanded and mobilised in teaching and learning processes. This aim was achieved using a sample of assignments developed in courses in different Bologna undergraduate programmes at the Engineering School at the University of Porto, during the first semester of the academic year 2009/2010. Whereas problem solving in engineering constitutes a structural element in the curricular organisation of the engineering programmes and is strongly related to argumentative skills, it was possible to conclude that students demonstrate and explain extensively, but do not argue, possibly because their teachers do not invite them to do so in assessment situations. (Contains 6 tables.)

The rapid development in Internet technology and its big popularity has led some universities around the world to incorporate web-based learning in some of their programmes. The present paper introduces a comprehensive survey of the publications about using remote laboratories in electrical engineering education. Remote laboratories are web-based, real-time laboratories that enable students to measure and control the measurements remotely in their own time. The survey highlights the features of many recent remote laboratories and demonstrates the software and networking technologies used. The paper provides a comprehensive overview on several aspects related to remote laboratories development. The paper concentrates on the publications appearing during the last decade. The review is arranged according to the area of specialisation, then chronologically.

This paper draws attention to the findings of an exploratory study that critically identified and analysed relevant perceptions of elementary level engineering education within the UK. Utilising an approach based upon grounded theory methodology, 30 participants including teachers, representatives of government bodies and non-profit providers of primary level engineering initiatives were interviewed. Three main concepts were identified during the analysis of findings, each relevant to primary engineering education. These were pedagogic issues, exposure to engineering within the curriculum and children's interest. The paper concludes that the opportunity to make a real difference to children's education by stimulating their engineering imagination suggests this subject area is of particular value. (Contains 1 figure.)

This paper provides a study of the quality assurance and accreditation in the Jordanian higher education sector and focuses mainly on engineering education. It presents engineering education, accreditation and quality assurance in Jordan and considers the Jordan University of Science and Technology (JUST) for a case study. The study highlights the efforts undertaken by the faculty of engineering at JUST concerning quality assurance and accreditation. Three engineering departments were accorded substantial equivalency status by the Accreditation Board of Engineering and Technology in 2009. Various measures of quality improvement, including curricula development, laboratories improvement, computer facilities, e-learning, and other supporting services are also discussed. Further assessment of the current situation is made through two surveys, targeting engineering instructors and students. Finally, the paper draws conclusions and proposes recommendations to enhance the quality of engineering education at JUST and other Jordanian educational institutions. (Contains 2 tables and 3 figures.)

Technology-mediated education or e-learning is growing globally both in scale and delivery capacity due to the large diffusion of the ubiquitous information and communication technologies (ICT) in general and the web technologies in particular. This statement has not yet been fully supported by research, especially in developing countries such as Algeria. The purpose of this paper was to identify directions for addressing the needs of academics in higher education institutions in Algeria in order to adopt the e-learning approach as a strategy to improve quality of education. The paper will report results of an empirical study that measures the readiness of the Algerian higher education institutions towards the implementation of ICT in the educational process and the attitudes of faculty members towards the application of the e-learning approach in engineering education. Three main objectives were targeted, namely: (a) to provide an initial evaluation of faculty members' attitudes and perceptions towards web-based education; (b) reporting on their perceived requirements for implementing e-learning in university courses; (c) providing an initial input for a collaborative process of developing an institutional strategy for e-learning. Statistical analysis of the survey results indicates that the Algerian higher education institution, which adopted the Licence-Master and Doctorate educational system, is facing a big challenge to take advantage of emerging technological innovations and the advent of e-learning to further develop its teaching programmes and to enhance the quality of education in engineering fields. The successful implementation of this modern approach is shown to depend largely on a set of critical success factors that would include: The extent to which the institution will adopt a formal and official e-learning strategy. The extent to which faculty members will adhere and adopt this strategy and develop ownership of the various measures in the context of their teaching and research responsibilities. The extent to which the university will offer adequate support in terms of training, software platform administration, online resource development and impact monitoring and assessment. (Contains 4 tables and 11 figures.)

Product design is the convergence point for engineering and design thinking and practices. Until recently, product design has been taught either as a component of mechanical engineering or as a subject within design schools but increasingly there is global recognition of the need for greater synergies between industrial design and engineering training. Product design engineering (PDE) is a new interdisciplinary programme combining the strengths of the industrial design and engineering. This paper examines the emergence of PDE in an environment of critique of conventional engineering education and exemplifies the current spread of programmes endorsing a hybrid programme of design and engineering skills. The paper exemplifies PDE with the analysis of the programme offered at Swinburne University of Technology (Australia), showing how the teaching of "designerly" thinking to engineers produces a new graduate particularly suited to the current and future environment of produce design practice. The paper concludes with reflections on the significance of this innovative curriculum model for the field of product design and for engineering design in general. (Contains 5 figures.)

Research on student-learning outcomes indicates that university graduates do not possess important skills required by employers, such as communication, decision-making, problem-solving, leadership, emotional intelligence, social ethics skills as well as the ability to work with people of different backgrounds. Today, engineering graduates are required to work within multicultural and multinational workplace environments, and thus need to possess adequate professional attributes and competencies. This paper elaborates on the missing links between engineering graduate attributes and employers' expectations. It further investigates whether the attributes gained by engineering graduates from Monash University, Australia, meet the expected needs of the industry. The paper also proposes a 3-D Competency Model to address the potential shortfalls of employers' expectations in that regard. (Contains 2 tables and 2 figures.)