Search

Abstract: This paper uses the 2006 IPCC Guidelines and latest country specific emission factors to estimate Indian methane emissions at sectoral and district level for the years 1990, 1995, 2005 and 2008. The estimates show that while methane emissions have increased steadily over past two decades, their share in India’s aggregate GHG emissions has declined from 31% in 1985 to 27% in 2008 mainly due to relatively higher growth CO2 emissions from the fossil fuels. The estimates for the year 2008 show that: i) agriculture sector, which employed two-thirds of India’s population and contributed 17% of GDP, accounted for 23% of India’s GHG emissions ii) 83% of country’s methane emissions are contributed by enteric fermentation, manure use and rice production, and iii) methane emissions from urban solid waste are steadily rising over the past two decades; their share in aggregate methane emissions has reached 8%. Resting on the disaggregated emissions estimates, the paper argues for using geographical and sectoral flexibilities to develop a roadmap for mitigation of methane emissions for India. [Copyright &y& Elsevier]

Building an effective clean air action plan for a city's air pollution problem requires an extensive network of monitoring stations to represent spatial and temporal patterns and an understanding of the sources contributing to the problem. In India, the National Clean Air Programme (NCAP) was launched in 2019 to develop clean air action plans for 131 non-attainment cities, which includes conducting source apportionment studies and establishing emission baselines. As of February 2023, only 39 cities have completed the apportionment studies. In this paper, we present the essential resources needed to strengthen the ambient air monitoring networks, for designing a representative airshed size, sampling size, and sampling frequency, to effectively track the progress made in the cities for better air quality. The NCAP cities were grouped into 104 airsheds (5.3% of the national area), collectively representing a total of 164 cities and a total population of 295 million (21% of the national total). Of these airsheds, 73 contain only one city; 18 contain two cities, and nine contain three cities. Four airsheds – Delhi, Mumbai, Indore, and Chandigarh contain 10, 8, 5, and 5 cities respectively. To measure and analyse particulate matter pollution, a total of 2118 sampling sites are recommended for the 104 airsheds. Cities could consider hybrid monitoring networks by complementing existing regulatory monitoring network with a high-density network of low-cost/sensor-grade monitors. An airshed level air quality management plan, an enhanced monitoring network, and consolidation of information on emission sources, are crucial for optimizing the clean air efforts under NCAP. [Display omitted] • Defined 104 airsheds to represent 131 non-attainment cities under NCAP. • Defined the minimum number of monitors required in the airsheds. • Conducted high-resolution meteorological modelling to determine minimum filter sampling frequency per airshed. • Examples of hybrid networks to reduce monitoring costs. [ABSTRACT FROM AUTHOR]

Aerosols affect the earth's climate system both on a regional as well as on a global scale. Several studies have identified India (the second most populous country) as one of the regional hot spots of aerosols due its increasing anthropogenic activities. The paper presents a temporal (annual and seasonal) study of aerosol optical depth (AOD) in the country using satellite data for thirteen year period (2001–2013). The Indian region is divided into four sub regions i.e., north, west, east and south. The analysis is carried out using Level 3 data from two satellite sensors, namely, MODIS (1° × 1°) and MISR (0.5° × 0.5°), onboard NASA's Terra platform. Annual and seasonal mean AOD variation has been studied. It is found that annual aerosol loading remains highest in Indo-Gangetic Plains (IGP) in all the years. In winter season, the overall loading is lowest for the entire country while it reaches maximum in the monsoon season. This could be attributed to the relative humidity, wind and associated rainfall patterns in the country. Also, the aerosol tendencies have been computed using the first and last six year period change in aerosol optical depth. Further, annual and seasonal trends in AOD have been calculated using weighted least square regression approach and the results have been compared. Statistically significant trends are reported at 95% confidence level. Weights are assigned corresponding to the expected errors associated with the satellite data. There is a good agreement in the seasonal tendencies and trends computed from both the sensors for winter, monsoon and post-monsoon seasons. Significantly increasing trends are found in winter and post-monsoon seasons which could be due to increase in anthropogenic activities. All the observations are separately reported for ten most populous cities of India. Delhi and Kolkata are amongst the most polluted cities in India. [ABSTRACT FROM AUTHOR]

This paper presents a new inventory of NMVOC emissions from anthropogenic sources in India for the year 2010. The main new element of this inventory, compared to previous work for India, is the use of new and more detailed data on solvent use sectors and oil production and distribution system. The results are presented at the national and state level for major sectors and VOC species. Finally, the annual emissions were spatially distributed at a fine resolution of 36 × 36 km 2 using detailed spatial information. The total anthropogenic NMVOC emissions in India in 2010 were estimated at 9.81 Tg which is in the range of the estimates made in most other studies. The majority of emissions (60%) originated from residential combustion of biomass for cooking. Solvent use sectors and oil production and distribution contributed about 20% followed by transport (12%) and open burning of agricultural residues (7%). Specie-wise distribution shows highest contribution from alkenes and alkynes (38%), followed by alkanes (22%), and aromatics (16%). [ABSTRACT FROM AUTHOR]

Abstract: A prerequisite to an air quality management plan for a city is some idea of the main sources of pollution and their contributions for a city. This paper presents the results of an application of the SIM-air modeling tool in six Indian cities – Pune, Chennai, Indore, Ahmedabad, Surat, and Rajkot. Using existing and publicly available data, we put together a baseline of multi-pollutant emissions for each of the cities and then calculate concentrations, health impacts, and model alternative scenarios for 2020. The measured annual PM10 (particulate matter with aerodynamic diameter less than 10 micron meter) concentrations in μg m−3 averaged 94.7 ± 45.4 in Pune, 73.1 ± 33.7 in Chennai, 118.8 ± 44.3 in Indore, 94.0 ± 20.4 in Ahmedabad, 89.4 ± 12.1 in Surat, and 105.0 ± 25.6 in Rajkot, all exceeding the annual standard of 60 μg m−3. The PM10 inventory in tons/year for the year 2010 of 38,400 in Pune, 50,200 in Chennai, 18,600 in Indore, 31,900 in Ahmedabad, 20,000 in Surat, and 14,000 in Rajkot, is further spatially segregated into 1 km grids and includes all known sources such as transport, road dust, residential, power plants, industries (including the brick kilns), waste burning, and diesel generator sets. We use the ATMoS chemical transport model to validate the emissions inventory and estimate an annual premature mortality due to particulate pollution of 15,200 for the year 2010 for the six cities. Of the estimated 21,400 premature deaths in the six cities in 2020, we estimate that implementation of the six interventions in the transport and brick kiln sectors, can potentially save 5870 lives (27%) annually and result in an annual reduction of 16.8 million tons of carbon dioxide emissions in the six cities. [Copyright &y& Elsevier]

Abstract: Aerosol measurements over a tropical semi-arid site in Anantapur (14.62°N, 77.65°E, 331 m asl), India, provide the variabilities of aerosol characteristics for the period of January 2007–December 2008. The mean values of aerosol optical depth at 500 nm (AOD500 nm) over 2-year period are found to be 0.37 ± 0.11, 0.39 ± 0.13 and 0.30 ± 0.10 during winter, summer and monsoon seasons, respectively. A rather systematic variation is seen with AOD peaking in the month of March, falling off gradually to the lowest value in June and increasing slowly superposed with some modulations, which show a weak secondary peak in October. The mean and standard values of the Ångström exponent, α (turbidity coefficient, β), are found to be 1.06 ± 0.33 (0.17 ± 0.05) during winter, 0.97 ± 0.35 (0.22 ± 0.04) during summer and 0.85 ± 0.26 (0.16 ± 0.06) during monsoon. The frequency distribution of α is relatively broad with two modes for dusty (α < 1) and non-dusty (α > 1) situations. This frequency distribution of α reveals a great dispersion of a values in all seasons thus denoting variability in the aerosol-size distribution. In this study, spectral AOD and Ångström exponent data are analyzed to obtain information about the adequacy of the simple use of the Ångström exponent and its variation for characterizing optical properties of aerosols, and exploring possibilities for a more efficient characterization of them. Using the least-squares fit method, the Ångström parameter, α, is calculated in the spectral interval 380–850 nm, along with coefficients a1 and a2 of the second-order polynomial fit to the plotted logarithm of AOD versus the logarithm of wavelength. The correlations between the coefficients a1 and a2 with months and α are discussed in the paper. [Copyright &y& Elsevier]

Abstract: This paper discusses the extent of Black Carbon (BC) radiative forcing in the total aerosol atmospheric radiative forcing over Pune, an urban site in India. Collocated measurements of aerosol optical properties, chemical composition and BC were carried out for a period of six months (during October 2004 to May 2005) over the site. Observed aerosol chemical composition in terms of water soluble, insoluble and BC components were used in Optical Properties of Aerosols and Clouds (OPAC) to derive aerosol optical properties of composite aerosols. The BC fraction alone was used in OPAC to derive optical properties of BC aerosols. The aerosol optical properties for composite and BC aerosols were separately used in SBDART model to derive direct aerosol radiative forcing due to composite and BC aerosols. The atmospheric radiative forcing for composite aerosols were found to be +35.5, +32.9 and +47.6Wm−2 during post-monsoon, winter and pre-monsoon seasons, respectively. The average BC mass fraction found to be 4.83, 6.33 and 4μgm−3 during the above seasons contributing around 2.2 to 5.8% to the total aerosol load. The atmospheric radiative forcing estimated due to BC aerosols was +18.8, +23.4 and +17.2Wm−2, respectively during the above seasons. The study suggests that even though BC contributes only 2.2–6% to the total aerosol load; it is contributing an average of around 55% to the total lower atmospheric aerosol forcing due to strong radiative absorption, and thus enhancing greenhouse warming. [Copyright &y& Elsevier]

Abstract: A decentralized emission inventories are prepared for road transport sector of India in order to design and implement suitable technologies and policies for appropriate mitigation measures. Globalization and liberalization policies of the government in 90''s have increased the number of road vehicles nearly 92.6% from 1980–1981 to 2003–2004. These vehicles mainly consume non-renewable fossil fuels, and are a major contributor of green house gases, particularly CO2 emission. This paper focuses on the statewise road transport emissions (CO2, CH4, CO, NOx, N2O, SO2, PM and HC), using region specific mass emission factors for each type of vehicles. The country level emissions (CO2, CH4, CO, NOx, N2O, SO2 and NMVOC) are calculated for railways, shipping and airway, based on fuel types. In India, transport sector emits an estimated 258.10 Tg of CO2, of which 94.5% was contributed by road transport (2003–2004). Among all the states and Union Territories, Maharashtra''s contribution is the largest, 28.85 Tg (11.8%) of CO2, followed by Tamil Nadu 26.41 Tg (10.8%), Gujarat 23.31 Tg (9.6%), Uttar Pradesh 17.42 Tg (7.1%), Rajasthan 15.17 Tg (6.22%) and, Karnataka 15.09 Tg (6.19%). These six states account for 51.8% of the CO2 emissions from road transport. [Copyright &y& Elsevier]

This paper examines the role of meteorology in linking near surface emissions of particulate matter and associated ambient concentrations in urban areas. The examination is conducted with two models: a steady state model based on urban dispersion models developed earlier, and an unsteady state model that accounts for time varying meteorological and emission inputs. After conducting sensitivity studies with the models, they are applied in Pune, India to (a) check consistency between estimates of surface emissions of particulate matter (with aerodynamic diameters of less than m, referred to as PM and observed ambient concentrations and (b) identify the variables that govern air quality. Results from the modeling exercise indicate that (1) nighttime meteorology governs both hourly as well as 24h averaged concentrations and (2) because the wind speeds in urban areas are typically low, concentration estimates from the steady state model differ substantially from those of the unsteady state model during the nighttime hours both in magnitude and in timing of the peaks; however, the difference between the 24h averaged concentrations from the two models is less than 5% for the cases considered here. Because our understanding of nighttime meteorology in urban areas is limited, there is a need for experimental programs to relate the diurnal variation of concentrations with associated meteorology, especially during the night. [Copyright &y& Elsevier]

Abstract: The atmospheric concentrations of chlorodifluoromethane (HCFC-22) have been continuously measured for over a decade in long-term monitoring experiments. Comparison of these data with the industrial and regulatory databases of production and sales indicates that containment of this material is improving and its rate of emission, relative to the quantities produced and in service, is falling. In this paper, we reconcile the results of long-term monitoring with emissions calculated from activity (as global sales into the categories of end-use) and identify the principal changes that have occurred in the overall emission functions. [Copyright &y& Elsevier]

India is a large producer and user of chlorofluorocarbons (CFCs) in the refrigeration and air-conditioning (RAC) sector. Government of India has taken several steps to restrict the production and consumption of CFCs. Refrigerant conservation through recovery, recycling (R&R) and reclamation is one way of reducing emissions and encouraging timely phase out of CFCs in developing countries. CFC recovery, recycling and reclamation have been mandated in many developed countries. However, this practice is yet to make an impact in India although it is practiced in MAC sector to some extent. India is planning for the final phase out of CFCs in the RAC service sector, in which R&R will be one of the components.A model has been developed to assess the economics of R&R for some typical parameters in developing counties like India. The model suggests that the enterprises recycling 1500 kg/a will break even within 1 year for all scenarios. However, R&R may not be cost effective for small workshops and low volume refrigerant vendors until either the price of CFC goes up or the cost of R&R unit is subsidized. A nationwide survey on RAC service sector revealed that in India, there are very few enterprises handling more than 500 kg/a. Therefore, there is a need to provide the RAC service sector with adequate and innovative financial incentives.This paper attempts to study the issues related to R&R for various sub-sectors of RAC in developing countries with an emphasis on cost effectiveness. India is used as a model for this study. [Copyright &y& Elsevier]

This paper presents the measurements of gaseous SO2, NO2, HNO3 and NH3 and particulate NH4+, NO3−and SO42− at Rampur, a rural site of semi-arid region of India and annual mean concentrations are 3.7±2.2, 7.3±3.7, 0.7±0.6 and 6.7±4.2 and 1.0±0.4, 1.1±1.3 and 2.6±1.6 μg m−3, respectively. Seasonal variation with higher concentration in winter is observed for gaseous SO2, NO2, and NH3 and particulate NH4+. The concentration of HNO3 and particulate NO3−and SO42− are higher in summer. Summer to winter ratio of HNO3 and particulate NO3− are 3.8 and 1.8, respectively, showing seasonal variation is more pronounced in case of HNO3 than particulate NO3−. The ratio of gaseous NH3 to particulate NH4+ (NH3/NH4+) is more than 1 probably due to basic nature of aerosol. Examination of equilibrium between gaseous NH3 and HNO3 and particulate NH4NO3 shows observed equilibrium constant is lower than theoretical equilibrium constant in summer and vice versa in winter. [Copyright &y& Elsevier]