Search

In wastewater treatment plants (WWTPs), the stochastic nature of influent wastewater and operational and weather conditions cause fluctuations in effluent quality. Data-driven models can forecast effluent quality a few hours ahead as a response to the influent characteristics, providing enough time to adjust system operations and avoid undesired consequences. However, existing data for training models are often incomplete and contain missing values. On the other hand, collecting additional data by installing new sensors is costly. The trade-off between using existing incomplete data and collecting costly new data results in three data challenges faced when developing data-driven WWTP effluent forecasters. These challenges are to determine important variables to be measured, the minimum number of required data instances, and the maximum percentage of tolerable missing values that do not impede the development of an accurate model. As these issues are not discussed in previous studies, in this research, for the first time, a comprehensive analysis is done to provide answers to these challenges. Another issue that arises in all data-driven modeling is how to select an appropriate forecasting model. This paper addresses these issues by first testing nine machine learning models on data collected from three wastewater treatment plants located in Iran, Australia, and Spain. The most accurate forecaster, Bayesian network, was then used to address the articulated challenges. Key variables in forecasting effluent characteristics were flow rate, total suspended solids, electrical conductivity, phosphorus compounds, wastewater temperature, and air temperature. A minimum of 250 samples was needed during the model training to achieve a great reduction in the forecasting error. Moreover, a steep increase in the error was observed should the portion of missing values exceed 10%. The results assist plant managers in estimating the necessary data collection effort to obtain an accurate forecaster, contributing to the quality of the effluent. [Display omitted] • Bayesian network is benchmarked against eight AI models to predict wastewater quality. • Bayesian networks can handle missing value in input data due to probabilistic nature. • Key variables in WWTP quality and quantity were specified. • Input data quality has a huge role in successful development of data-driven models. • The prediction error sharply increases when the portion of missing data exceeds 10%. [ABSTRACT FROM AUTHOR]

In this paper we propose and discuss different Deep Learning-based ensemble algorithms for a problem of low-visibility events prediction due to fog. Specifically, seven different Deep Learning (DL) architectures have been considered, from which multiple individual learners are generated. Hyperparameters of the models, including parameters concerning data preprocessing, models architecture and training procedure, are randomly selected for each model within a pre-defined discrete range. Also, every model is trained with slightly different data sampled randomly, assuring that every models introduce variety in the ensemble. Then, three different information fusion techniques are employed to build the ensemble models. The influence of the filtering process and the elitism level (the percentage of the individual models entering the ensemble) is also assessed. The performance of the proposed methodology have been tested in two real problems of low-visibility events prediction due to orographical and radiation fog, at the north of Spain. Comparison with different Machine Learning, alternative DL algorithms and meteorological-based methods show the good performance of the proposed deep learning ensembles in this problem. [ABSTRACT FROM AUTHOR]

One of the main lines of research in the discipline of mobility mining is the development of predictors able to anticipate human travel behaviour in great detail. However, access to the high-resolution spatio-temporal data on which most existing solutions are based is rather limited due to multiple factors, e.g. costly access to third-party data. These restrictions give rise to a problem of developing predictors of human mobility in most setting, since the amount of data available to train these prediction models is insufficient. This paper explores the feasibility of using a public data source such as Twitter to predict the number of trips at the nationwide level. The proposed approach combines a large set of geotagged Twitter posts with an open data source published by the Spanish government on traveller mobility based on mobile phone location. Both datasets are used as input to Machine Learning models to validate the use of Twitter data for improving the prediction of these models. The results show that Twitter data have considerable value as a predictor of large-scale human mobility, especially for Long Short-Term Memory (LSTM) models. As a result, the relevance of this work resides in demonstrating that the use of Twitter could be considered as an alternative to substantially enhance the prediction of mobility within a country when it is combined with other open data sources. • A novel approach for nation-wide human mobility forecasting is proposed. • The predictor combines mobile-phone and Twitter location data as input variables. • LSTM and VAR models have been tested as candidates to develop the mechanism. • Twitter has proved to be a suitable exogenous input. • The system has been tested in Spain achieving a 6.85 CRMSE for 7-day prediction. [Display omitted] [ABSTRACT FROM AUTHOR]

[Display omitted] • A novel genetic algorithm-based seasonal fractional grey model is proposed. • Monthly electricity generation is forecasted since the Covid-19 lockdown started. • Seasonal grey and machine learning models are used for forecasting. • The selected countries are France, Germany, Spain, Turkey, and the UK. • The share of renewables in total electricity generation is forecasted. Balances in the energy sector have changed since the implementation of the Covid-19 pandemic lockdown in Europe. This paper analyses how the lockdown affected electricity generation in European countries and how it will reshape future energy generation. Monthly electricity generation from total renewables and non-renewables in France, Germany, Spain, Turkey, and the UK from January 2017 to September 2020 were evaluated and compared. Four seasonal grey prediction models and three machine learning methods were used for forecasting; the quarterly results are presented to the end of 2021. Additionally, the share of electricity generation from renewables in total electricity generation from 2017 to 2021 for the selected countries was compared. Electricity generation from total non-renewables in the second quarter of 2020 for France, Germany, Spain, and the UK decreased by 21%–25% compared to the same period of 2019; the decline in Turkey was approximately 11%. Additionally, electricity generation from non-renewables in the third quarter of 2020 for all countries, except Turkey, decreased compared to the same period of the previous year. All grey prediction models and support vector machine method forecast that the share of renewables in total electricity generation will increase continuously in France, Germany, Spain, and the UK to the end of 2021. The forecasting methods provided by this study open new avenues for research on the impact of the Covid-19 pandemic on the future of the energy sector. [ABSTRACT FROM AUTHOR]

Thermostatic load control systems are widespread in many countries. Since they provide heat for domestic hot water and space heating on a massive scale in the residential sector, the assessment of their energy performance and the effect of different control strategies requires simplified modeling techniques demanding a small number of inputs and low computational resources. Data-driven techniques are envisaged as one of the best options to meet these constraints. This paper presents a novel methodology consisting of the combination of an optimization algorithm, two auto-regressive models and a control loop algorithm able to virtually replicate the control of thermostatically driven systems. This combined strategy includes all the thermostatically controlled modes governed by the set point temperature and enables automatic assessment of the energy consumption impact of multiple scenarios. The required inputs are limited to available historical readings from smart thermostats and external climate data sources. The methodology has been trained and validated with data sets coming from a selection of 11 smart thermostats, connected to gas boilers, placed in several households located in north-eastern Spain. Important conclusions of the research are that these techniques can estimate the temperature decay of households when the space heating is off as well as the energy consumption needed to reach the comfort conditions. The results of the research also show that estimated median energy savings of 18.1% and 36.5% can be achieved if the usual set point temperature schedule is lowered by 1 °C and 2 °C, respectively. [ABSTRACT FROM AUTHOR]