Search

Drought is a natural and complex climatic hazard. It has both natural and social connotations. The purpose of this study is to use machine learning methods (MLAs) for drought vulnerability (DVM) in Uttar Pradesh, India. There were 18 factors used to determine drought vulnerability, separated into two groups: physical drought and meteorological drought. The study found that the eastern part of Uttar Pradesh is high to very highly prone to drought, which is approximately 31.38% of the area of Uttar Pradesh. The receiver operating characteristic curve (ROC) was then used to evaluate the machine learning models (artificial neural networks). According to the findings, the ANN functioned with AUC values of 0.843. For policy actions to lessen drought sensitivity, DVMs may be valuable. Future exploration may involve refining machine learning algorithms, integrating real-time data sources, and assessing the socio-economic impacts to continually enhance the efficacy of drought resilience strategies in Uttar Pradesh., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Flash floods in mountainous regions like the Himalayas are considered to be common natural calamities. Their consequences often are more dangerous than any flood event in the plains. These hazards not only put human lives at threat but also cause economic deflation due to the loss of lands, properties, and agricultural production. Hence, assessing the impact of such hazards in the existing agricultural system is of utmost importance to understand the probable crop loss. In this paper, we studied the efficiency of the remotely sensed microwave data to map the croplands affected by the flash flood that occurred in July 2023 in Himachal Pradesh, a mountainous state in the Indian Himalayan Region. The Una, Hamirpur, Kangra, and Sirmaur districts were identified as the most affected areas, with about 9%, 6%, 5.74%, and 3.61% of the respective districts' total geographical area under flood. Further, four machine learning algorithms (random forest, support vector regressor, k-nearest neighbor, and extreme gradient boosting) were evaluated to forecast maize and rice crop production and potential loss during the Kharif season in 2023. A regression algorithm with ten predictor variables consisting of the cropland area, two vegetation indices, and seven climatic parameters was applied to forecast the maize and rice production in the state. Amongst the four algorithms, random forest showed outstanding performance compared to others. The random forest regressor estimated the production of maize and rice with R 2 more than 0.8 in most districts. The mean absolute error and the root mean squared error obtained from the random forest regressor were also minimal compared to the others. The maximum production loss of maize is estimated for Solan (54.13%), followed by Una (11.06%), and of rice in Kangra (19.1%), Una (18.8%) and Kinnaur (18.5%) districts. This indicated the utility of the proposed approach for a quick in-season forecast on crop production loss due to climatic hazards., (© 2024. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

The article provides a quantitative and qualitative description of machine learning research in India using measures such as growth rate, global publication share, national-level share of international collaborative papers, citations per paper, and highly cited papers. The data for the study was sourced from Scopus database covering 12-year period 2006-17. The study finds that the United States is the world leader in the machine learning research, followed by China, United Kingdom, Germany, and India. India registered 52.46% annual growth in the subject, more than twice that of the world (22.03%). India's citation impact was 5.34 citations per paper and its national share of highly cited papers was 0.68% (27 papers). The leading Indian research organizations in machine learning research include Vellore Institute of Technology, Anna University, Chennai, Indian Institute of Technology, New Delhi, Indian Institute of Science (IIS), Bangalore, and so on. The top 15 journals that accounted for 31.46% of India's output include International Journal of Machine Learning and Cybernetics (with 82 papers), International Journal of Applied Engineering Research (77 papers), Journal of Machine Learning Research (46 papers), Neurocomputing (44 papers), and so on. [ABSTRACT FROM AUTHOR]

This study has sought to evaluate the global sentiment analysis research (14025 records) on quantitative and qualitative metrics to understand the current status of research in the subject at global, national, institutional, and individual author level. The data for the study was sourced from the Scopus database covering the period 2003-2020. The global research in the subject registered an 81.15% annual average growth and averaged 11.91 citations per paper. India, China, and USA lead the global ranking of the top 10 most productive countries, with (18.37%, 17.71%, and 13.36%) respectively as their global publications share. The study identifies the most productive and most impactful research organizations and authors in the subject, profiles the highly cited papers, the share of international collaborative papers and the most productive source journals, and the most productive organizations as well as the leading authors. The study concludes that international collaboration research contributes significantly to the quality of research in sentiment analysis studies. [ABSTRACT FROM AUTHOR]

The financial landscape in India is undergoing a transformative shift propelled by the integration of Artificial Intelligence (AI) technologies within the Banking, Financial Services, and Insurance (BFSI) sector. This paper explores the multifaceted impact of AI on various facets of the industry, ranging from customer service and engagement to risk management and regulatory compliance. In the realm of customer service, AI-powered chatbots and virtual assistants have revolutionized interaction channels, providing instantaneous responses to customer queries and delivering personalized experiences. The paper discusses how latest technologies contribute to improved efficiency, reduced response times, and heightened customer satisfaction. Furthermore, the study investigates the significant contribution of AI in fortifying security measures within the BFSI sector. Machine learning algorithms are examined for their efficacy in fraud detection, leveraging vast datasets to identify anomalous transaction patterns and enhance the resilience of financial systems. The adoption of biometric authentication methods, such as facial recognition and fingerprint scanning, is explored as a means to bolster account security and mitigate risks associated with identity theft. The paper also elucidates the impact of AI on credit scoring, underwriting processes, and risk management strategies. Predictive analytics and automated underwriting systems are scrutinized for their role in expediting loan approvals, while AI-driven risk assessment models are discussed for their ability to analyze market trends and economic indicators, aiding in more informed decision-making. In the context of process automation, the integration of Robotic Process Automation (RPA) in routine tasks is highlighted for its potential to reduce operational costs and minimize errors. The study examines the deployment of AI in document processing, enhancing efficiency in document verification and compliance activities. Emerging trends such as voice banking, insurtech innovations, and the use of blockchain technology are also addressed in the paper. AI-powered voice recognition, telematics, roboadvisors, and smart contracts are explored for their contributions to enhancing accessibility, personalized financial advice, and security in transactions. As the BFSI sector in India continues to embrace AI-driven solutions, this research aims to provide a comprehensive overview of the evolving landscape, shedding light on the transformative potential of AI technologies and their implications for the future of financial services in the country. [ABSTRACT FROM AUTHOR]

Forecasting of load is essential for operating power systems. India recently witnessed one of the worst power crisis with the highest ever power demand of 207 GW on April 29, 2022. The demand in the month of May and June 2022 was estimated to reach 215 GW. The peak demand this year 2023, according to the electricity ministry, is predicted to be around 230 GW from April to June. The inability to meet certain fundamental issues as power can take a toll on any country's economy. Proper prediction helps in proper decision making and planning. The main objective of this paper is to predict day ahead electrical load demand for Assam. Statistical and Machine Learning Algorithms has been studied. The study has been carried out using real-time data for the years 2016, 2017 and 2018. The paper presents a detailed analysis of the different hyper parameters of the deep learning models and their effect is seen on the learning efficiency. A novel stacked forecasting model is proposed using neural networks as base learners and CatBoost as the meta-learner. The performance of the proposed model has been evaluated and compared with individual models in terms of training time and accuracy using different error metrics namely MAE, MSE, RMSE, MAPE and R2 score. A comparison of the proposed prediction model with the prediction models available in literature has been presented. The conclusion states that both the statistical and machine learning algorithms used in this study act as useful tools for daily load forecasting with considerable accuracy; yet machine learning algorithm outperforms the statistical methods. The entire work has been done in Google Colaboratory using Python as the programming language. [ABSTRACT FROM AUTHOR]

The scenario of developed and developing countries nowadays is disturbed due to modern living style which affects environment, wildlife and natural habitat. Environmental quality has become or is a subject of major concern as it is responsible for health hazard of mankind and animals. Measurements and prediction of hazardous parameters in different fields of environment is a recent research topic for safety and betterment of people as well as nature. Pollution in nature is an after-effect of civilization. To combat the damage already happened, some processes should be evolved for measurement and prediction of pollution in various fields. Researchers of all over the world are active to find out ways of predicting such hazard. In this paper, application of neural network and deep learning algorithms is chosen for air pollution and water pollution cases. The purpose of this review is to reveal how family of neural network algorithms has applied on these two pollution parameters. In this paper, importance is given on algorithm, and datasets used for air and water pollution as well as the predicted parameters have also been noted for ease of future development. One major concern of this paper is Indian context of air and water pollution research, and the research potential presents in this area using Indian dataset. Another aspect for including both air and water pollutions in one review paper is to generate an idea of artificial neural network and deep learning techniques which can be cross applicable for future purpose. [ABSTRACT FROM AUTHOR]

Early-stage prediction of a disease is an important and challenging task. The application of machine learning techniques is playing an important role in this era. Thyroid is one of the chronic endocrine diseases, and approximately 42 million people in India are affected by this disease. This paper presents a comprehensive investigation into the enhancement of classification performance through the novel 'FeatureBoostThyro' (FBT) model. The study evaluates various machine learning algorithms, including stochastic gradient descent (SGD), K nearest neighbor (KNN), logistic regression (LR), naive bayes (NB), and support vector machine (SVM), in conjunction with diverse feature selection methods. The research systematically explores the impact of feature selection techniques such as information gain, relief F, chi-square, gini index, forward selection, backward selection, recursive feature elimination, and LASSO on model performance across the chosen algorithms. The analysis reveals notable variations in performance metrics, including accuracy, precision, recall, and F1-score, providing valuable insights into the interplay between algorithm and feature selection. One main contribution of this research is the introduction of the FBT model, which consistently outperforms other models across various feature selection methods, making it a promising tool for addressing complex classification tasks. The findings contribute to a broader understanding of model selection and optimization in machine learning applications. The proposed model undergoes evaluation using two distinct datasets: the primary dataset acquired from Lata Mangeshkar Hospital in Nagpur and the secondary dataset obtained from the UCI dataset. [ABSTRACT FROM AUTHOR]

According to researches, there are around 188 million unemployed people around the globe. We may find many job vacancies on job portals and across the internet to help the job seekers. India alone has more than a hundred job portals. One major issue people face here is that the job seekers are not sure if the employer is real or fake. Most of these portals do not have a system that could check if the employer, posting a job is real or fake. Scammers are making use of this opportunity to post fake job offers which might look genuine to the job seekers applying for it. This way the poor job seekers might lose a large amount of money and time. A best possible solution for this problem would be that the job portal itself being able to identify if the job being posted is real or fake. This paper suggests using a machine learning model to achieve this goal. The idea here is to use natural language processing to understand and analyze the job posting and then making use of a machine learning model to predict if the job posting is real or fake. The first step is to import a dataset which has real life real and fake job posting. In this project, Employment Scam Aegean Dataset provided by University of Aegean Laboratory of Information and Communication system Security is being used. This dataset contains 18000 samples containing real life job postings. Various text cleaning techniques like lemmatization, stop words removal and special characters and punctuation removal is done on the data. Once the text data is processed, various algorithms like Random Forest, Linear SVC, Gradient Boosting Classifier, Gaussian naïve Bayes classifier and XGB classifier is used to test the performance of the model. The best two algorithms with respect to the percentage of accuracy with which the models could classify real and fake job posting was taken into consideration. Random Forest and Linear SVC could give accuracy close to 98%. Both of these algorithms were tuned using GridSearchCV, a library function which is a part of sklearn's model selection package. After tuning, the performance of both these algorithms increased and Linear SVC gave a better accuracy score of 99%. Hence Linear SVC is being used in this project for predicting real and fake job posting on a job portal.. [ABSTRACT FROM AUTHOR]

Agricultural product costs play a significant part in the horticultural market. In India, vegetables, for example, tomatoes have the biggest supply and price variances among farming items. As tomatoes are grown around the year, outdoor and indoor, their yields change because of various factors, it is hard to settle tomatoes' inventory and costs. Although the Government puts numerous efforts to balance out the supply and costs of vegetables, continuous meteorological changes have prompted unstable supply and price fluctuations of vegetables. Accordingly, the right anticipating of vegetable costs is a significant issue. To oblige these, in this paper, an attempt has been made to dissect the costs and yield of tomatoes in India by utilizing a Machine Learning approach. This will unquestionably help the farmers and the Government if the anticipated costs are getting higher in the forthcoming months, then appropriate strategies can be made to diminish the costs of tomatoes. [ABSTRACT FROM AUTHOR]

China, India, and the USA are the countries with the highest energy consumption and CO2 emissions globally. As per the report of datacommons.org, CO2 emission in India is 1.80 metric tons per capita, which is harmful to living beings, so this paper presents India's detrimental CO2 emission effect with the prediction of CO2 emission for the next 10 years based on univariate time-series data from 1980 to 2019. We have used three statistical models; autoregressive-integrated moving average (ARIMA) model, seasonal autoregressive-integrated moving average with exogenous factors (SARIMAX) model, and the Holt-Winters model, two machine learning models, i.e., linear regression and random forest model and a deep learning-based long short-term memory (LSTM) model. This paper brings together a variety of models and allows us to work on data prediction. The performance analysis shows that LSTM, SARIMAX, and Holt-Winters are the three most accurate models among the six models based on nine performance metrics. Results conclude that LSTM is the best model for CO2 emission prediction with the 3.101% MAPE value, 60.635 RMSE value, 28.898 MedAE value, and along with other performance metrics. A comparative study also concludes the same. Therefore, the deep learning-based LSTM model is suggested as one of the most appropriate models for CO2 emission prediction. [ABSTRACT FROM AUTHOR]

The emergent technology has been increasingly incorporated with the tourism industry. In the digital world, social media plays an important role in identifying the most visited tourist places. More than 80% of people commonly used the social media platform called 'Twitter'. By using tweet reviews, tourists around the world know about the feelings, suggestions and opinions of most visited tourist places in the selected region. This paper recommends an approach for the development of trip planning in South India based on tourist's preferences. For the research, we use Twitter Application Programming Interface to collect information about the most visited tourist places in South India by using tweets reviews and store it as South India Tourism Tweet reviews database. This paper mainly focuses on analyzing Twitter reviews, which are very helpful to locate the most visited tourist place. In the tweets where reviews are mostly unstructured and heterogeneous, which are then classified into positive tweets, negative tweets and neutral tweets by using the preprocessing technique and machine learning algorithm called support vector machine. Performance measures are calculated by using the classification results. Finally, the results are plotted by using the classification results and performance measures as a wordcloud. This can be very useful for tourists to select the most visited tourist locations. The proposed system can satisfy individual tourist needs. [ABSTRACT FROM AUTHOR]

Introduction: Accurate estimation of dementia prevalence is essential for making effective public and social care policy to support individuals and families suffering from the disease. The purpose of this paper is to estimate the prevalence of dementia in India using a semi-supervised machine learning approach based on a large nationally representative sample. Methods: The sample of this study is adults 60 years or older in the wave 1 (2017–2019) of the Longitudinal Aging Study in India (LASI). A subsample in LASI received extensive cognitive assessment and clinical consensus ratings and therefore has diagnoses of dementia. A semi-supervised machine learning model was developed to predict the status of dementia for LASI participants without diagnoses. After obtaining the predictions, sampling weights and age standardization to the World Health Organization (WHO) standard population were applied to generate the estimate for prevalence of dementia in India. Results: The prevalence of dementia for those aged 60 years and older in India was 8.44% (95% CI: 7.89%–9.01%). The age-standardized prevalence was estimated to be 8.94% (95% CI: 8.36%–9.55%). The prevalence of dementia was greater for those who were older, were females, received no education, and lived in rural areas. Discussion: The prevalence of dementia in India may be higher than prior estimates derived from local studies. These prevalence estimates provide the information necessary for making long-term planning of public and social care policy. The semi-supervised machine learning approach adopted in this paper may also be useful for other large population aging studies that have a similar data structure. [ABSTRACT FROM AUTHOR]

The automobile industry has been growing at a high rate in the past few decades, contributing about 7.5% to India's total Gross Domestic Product (GDP). As the number of vehicle owners are increasing the demand and need for automobile service is also high, but people are busy with their routines, hence failing to perform proper maintenance on their vehicles. This paper uses machine learning algorithms and object detection to come up with the idea to develop a web application that suggests users some offers and timing for their car maintenance by analyzing a car using computer vision without the owner's involvement. This project aims at both the owner's convenience and the growth of the service provider's business. Generally, we do not realize that multiple tasks can be done at a time, which results in incomplete tasks. This paper presents a machine learning-based automated car maintenance system with effective time utilization, by using the Internet of Things (IoT) device that could be installed at the parking's main gate in places where people tend to spend many hours, like offices or malls. This device consists of a camera that is responsible for detecting a car image from the live video. These images are then sent to the device, which uses pre-trained models to detect any damages or dirtiness in the vehicle. [ABSTRACT FROM AUTHOR]

In almost every country, patents need to be renewed multiple times after they are granted. A patentee assesses the value of the patent and then pays a renewal fee to keep it active for another stipulated period. The factors that characterize the value of a patent is subjective. This paper aims to address the research gap of building an accurate model for predicting the renewal life (often considered as a substitute for the patent value) of Indian patents, and identification of significant factors that influence the renewal life. This study uses an extensive data set collected from the Indian Patent Office for all granted patents filed between 1995 and 2005. The popular statistical and machine learning algorithms do not result in accurate predictive models, because the patent renewal life distribution (at least for the Indian patents) shows unusual spikes at the two extreme values, which makes the modeling task more challenging. We propose a new two-stage hybrid model by combining an efficient multi-class classifier and a binomial regression model for predicting the complex renewal data distribution. We conducted a comparative analysis of the proposed model with several state-of-the-art machine learning and statistical models. The results show that the proposed hybrid model gives 90% accuracy as compared to the best competitor which gives only 40% accuracy., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Kumar et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

This study examined and addressed climate change's effects on hydrological patterns, particularly in critical places like the Godavari River basin. This study used daily gridded rainfall and temperature datasets from the Indian Meteorological Department (IMD) for model training and testing, 70% and 30%, respectively. To anticipate future hydrological shifts, the study harnessed the EC-Earth3 data, presenting an innovative methodology tailored to the unique hydrological dynamics of the Godavari River basin. The Sacramento model provided initial streamflow estimates for Kanhargaon, Nowrangpur, and Wairagarh. This approach melded traditional hydrological modeling with advanced multi-layer perceptron (MLP) capabilities. When combined with parameters like lagged rainfall, lagged streamflow, potential evapotranspiration (PET), and temperature variations, these initial outputs were further refined using the Sac-MLP model. A comparison with Sacramento revealed the superior performance of the Sac-MLP model. For instance, during training, the Nash Sutcliffe efficiency (NSE) values for the Sac-MLP witnessed an improvement from 0.610 to 0.810 in Kanhargaon, 0.580 to 0.692 in Nowrangpur, and 0.675 to 0.849 in Wairagarh. The results of the testing further corroborated these findings, as evidenced by the increase in the NSE for Kanhargaon from 0.890 to 0.910. Additionally, Nowrangpur and Wairagarh experienced notable improvements, with their NSE values rising from 0.629 to 0.785 and 0.725 to 0.902, respectively. Projections based on EC-Earth3 data across various scenarios highlighted significant shifts in rainfall and temperature patterns, especially in the far future (2071-2100). Regarding the relative change in annual streamflow, Kanhargaon projections under SSP370 and SSP585 for the far future indicate increases of 584.38% and 662.74%. Similarly, Nowrangpur and Wairagarh are projected to see increases of 98.27% and 114.98%, and 81.68% and 108.08%, respectively. This study uses EC-Earth3 estimates to demonstrate the Sac-MLP model's accuracy and importance in climate change water resource planning. The unique method for region-specific hydrological analysis provides vital insights for sustainable water resource management. This research provides a deeper understanding of climate-induced hydrological changes and a robust modeling approach for accurate predictions in changing environmental conditions., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Natural disasters such as earthquakes endanger human lives and infrastructure, particularly in urban areas. With the advancements in science and technology in understanding natural hazards, recent studies have attempted to mitigate them by mapping the risks using geospatial technology. In this paper, we attempt to integrate the multi-criteria decision-making (MCDM) models, namely the Analytical Hierarchy Process (AHP) and the Criteria Importance Through Inter-criteria Correlation (CRITIC), besides using the artificial neural network (ANN) to assess the seismic risk in the eastern coast of India. The AHP-CRITIC technique is used to evaluate the earthquake coping capacity and vulnerability and has been further used to generate a training base for earthquake probability mapping by ANN. The earthquake probability and spatial intensity information are used to develop the hazard map. Following that, integrating vulnerability, hazard and coping capacity spatial information assessed earthquake risk. Our results indicate that approximately 5% of the study area is at high risk, whilst more than 11% of the population is at high risk due to seismic induced hazards. The area under the curve of the receiver operating characteristic curve is 0.85, which indicates reliable results. The results of this study may help various agencies involved in planning, development and disaster mitigation to develop seismic hazard mitigation methods by better understanding their impacts on the eastern coastal region of India., (© 2024. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

Since the first fully homomorphic encryption scheme was published in 2009, many papers have been published on fully homomorphic encryption and its applications. Machine learning is one of the most interesting applications and has drawn a lot of attention from researchers. To better represent and understand the field of Homomorphic Encryption in Machine Learning (HEML), this paper utilizes automated citation and topic analysis to characterize the HEML research literature over the years and provide the bibliometrics assessments for this burgeoning field. This is conducted by using a bibliometric statistical analysis approach. We make use of web-based literature databases and automated tools to present the development of HEML. This allows us to target several popular topics for in-depth discussion. To achieve these goals, we have chosen the well-established Scopus literature database and analyzed them through keyword counts and Scopus relevance searches. The results show a relative increase in the number of papers published each year that involve both homomorphic cryptography and machine learning. Using text mining of articles titles, we have found that cloud computing is a popular topic in this field, which also includes neural networks, big data, and the Internet of Things. The analysis results show that China, the US, and India have generated almost half of all the research contributions in HEML. The citation statistics, keyword statistics, and topic analyses give us a quick overview of the development of the field, which can be of great help to new researchers. It is also possible to apply our methodology to other research areas, and we see great value in this approach. [ABSTRACT FROM AUTHOR]

Precise food price forecasting is crucial for any country, and searching for appropriate approach(s) from an assortment of available strategies toward this objective is an open problem. The current Indian Wholesale Price Index (WPI) series contains sixty individual food items in the 'manufacture of food product' category. This work considered the monthly data from April 2011 to June 2022, i.e., one hundred thirty-five months' data of these sixty WPIs. The researchers extracted the linearity, curvature, and autocorrelation features for each WPI. The curvature and linearity-based grouping of these WPIs revealed that the WPIs are heterogeneous. This work proposed an extreme learning machine (ELM) approach for forecasting these WPIs. The present work employed the following twenty-two time-series forecasting techniques: six standard methods (Auto ARIMA, TSLM, SES, DES, TES, and Auto ETS), five neural networks (Auto FFNN, Auto GRNN, Auto MLP, Auto ELM, and proposed ELM), and eleven state-of-art techniques (two ARIMA-ETS based ensembles, an ARIMA-THETAF-TBATS based ensemble, one MLP, and seven LSTM-based models) to identify the best forecasting approach for these WPIs. For the majority of WPIs, the offered ELM attained suitable performance in the case of fifteen months of out-of-sample forecasting. Nearly eighty-seven percent of cases achieved high accuracy (MAPE = ten) and outshined others. Upon accuracy comparison, both forecast-MAPE and forecast-RMSE, between the proposed ELM and others, this paper observed that the proposed ELM's performance is more favorable. This paper's findings imply that the proposed ELM is a promising prospect to offer accurate forecasts of these sixty WPIs. [ABSTRACT FROM AUTHOR]

India is developing at a fast speed as is the utilization of innovation in the developing areas of the country. A significant mass of the populace is as yet reliant and rehearsing horticulture as its essential type of revenue. India has been in a persistent tryst with its cultivating infra, rehearses and related networks since freedom. Price Prediction, these days, has turned into a vital agrarian issue which is to be addressed just in light of the accessible information. The point of this paper is to anticipate the yield cost for the following revolution. This work depends on observing appropriate information models that aides in accomplishing high exactness and over-simplification for price prediction, Yield prediction and fertilizer recommendation. For taking care of this issue, different Machine learning strategies were assessed on various information sets. This work presents a framework which involves information examination strategies to foresee the cost of the yield. The proposed framework will apply AI calculations and foresee the cost of the harvest in view of different factors like Area collected, Area planted and so on. This furnishes a rancher with knowledge of what the future cost of the yield that he will gather. Along these lines, the paper fosters a framework by incorporating information from different sources, information investigation, expectation examination which can assist with foreseeing the objective cost of the yield and increment the benefit edges of rancher helping them over a more drawn-out run. The total examination comes up to a resolution that XGBoost and Gradient boosting algorithm is the reasonable strategy for our task. [ABSTRACT FROM AUTHOR]

Accurate and reliable streamflow prediction is critical for optimising water resource management, reservoir flood operations, watershed management, and urban water management. Many researchers have published on streamflow prediction using techniques like Rainfall-Runoff modelling, Time series Models, Data-driven models, Artificial intelligence, etc. Still, there needs to be generalised method practise in the real world. The resolution of this issue lies in selecting different methods for a particular study area. This paper uses the Support vector regression machine learning model to predict the streamflow for the Tehri Dam, Uttarakhand, India, at the Daily and Ten Daily time steps. Two cases are considered in predicting daily and ten daily time steps. The first case includes four input variables: Discharge, Rainfall, Temperature, and Snow cover area. The second case comprises only three input variables: Rainfall, Temperature, and Snow cover area. Radial Kernel is used to overcome the space complexity in the datasets. The K-fold cross-validation is suitable for prediction as it averages the prediction error rate after evaluating the SVR model's performance on various subsets of the training data. The streamflow data for daily and ten daily time steps have been collected from 2006 to 2020. The calibration period is from 2006 to 2016, and the validation period is from 2017 to 2020. Nash Sutcliffe Efficiency (NSE) and Coefficient of determination (R2) are used as the accuracy indicator in this manuscript. The lag has been observed in the daily prediction time series when three input variables are considered. For other scenarios, the respective model shows excellent results at both the temporal scale and the parametres, which play a vital role in prediction. The study also enhances the effect on the potential use of input parametres in the machine learning model. [ABSTRACT FROM AUTHOR]

Artificial Intelligence is quickly emerging as a technological solution for the agriculture industry to surmount its classical challenges. Artificial Intelligence is facilitating farmers to refine their products and alleviate unfavourable impacts due to the environment. The central concern of this paper is predictive analytics to develop a machine learning model to identify and predict crop yield based on multiple environmental factors. In this paper, a hybrid learner 'RaNN' is proposed that combines the feature sampling and majority voting technique of Random Forest in-combination with the multilayer Feedforward Neural Network to predict the crop yield. Research has also ascertained the essential features responsible for accurate yield prediction. The proposed model works for rice yield prediction, one of the chief grains of India. The region chosen for the work is Punjab, which is among the largest producer states of India for rice. The dataset consists of 15 attributes comprising the weather and agriculture data collected from the Indian Meteorological Department Pune, and Punjab Environment Information System (ENVIS) Center, Government of India. The study has also made a comparative assessment of 'RaNN' with machine learning methods like Multiple Linear Regression, Random Forest, Decision Tree, Boosting Regression, Support Vector Machine Regression, Ensemble Learner, and Artificial Neural Network. Our model RaNN has listed a better prediction accuracy with minimal error among the other techniques providing a 98% correlation between the actual and the predicted yield. Abbreviations: AI – Artificial Intelligence; ANN – Artificial Neural Network; BR – Boosting Regression; Chem Fert – chemical fertilisers; DT – Decision Tree; EL – Ensemble Learner; ENVIS – Punjab Environment Information System; GBM – Stochastic Gradient Boosting Method; GPS – Global Positioning System; HMAX – highest maximum temperature in degrees C; IMD – Indian Meteorological Department; L1 – Lasso regression; L2 – Ridge regression; LMIN – lowest minimum temperature; ML – Machine Learning; MAE – Mean Absolute Error; MEVP – mean evaporation in mm; MLR – Multiple Linear Regression; MMAX – mean maximum temperature in degrees C; MMIN – mean minimum temperature in degrees C; MSSH – Mean sunshine duration in hours; MWS – mean wind speed in km/h; P1 – number of days with precipitation (0.1–0.2 mm); P2 – number of days with precipitation (greater than or equal to 0.3 mm); RaNN – Hybrid RF-ANN model; RMSE – Root Mean Squared Error; $${R^2}$$ R 2 – Coefficient of determination; RD – number of rainy days; RF – Random Forest; SVM Reg – Support Vector Machine Regression; TMRF – total rainfall per month in mm [ABSTRACT FROM AUTHOR]

The government of India is the final authority for country-wide policy making and policy implementation in the country. Recent times have witnessed increasing use of data-driven approaches in policy and decision making. This is true for public policy formulation as well. This paper is an effort to highlight how data science and artificial intelligence have the potential to revolutionize the field of public policy in India. The paper discusses some such applications and lists down the likely challenges. An extensive review of the research activities in this field has been undertaken. Cases of data science and artificial intelligence reviewed in this paper span over various sectors of public policy such as- policy making process, health, education, environment, agriculture, economy, and security. This paper, thus, aims to facilitate collaboration in the fields of public policy and data technology, in order to enable higher levels of public service in India. [ABSTRACT FROM AUTHOR]

Pregnancy and fetus development is an incredibly intricate biological process that can go wrong when the health of fetus or the mother gets worse. Currently, India has the highest number of stillbirths, with an estimated 5,92,100 deaths per year, and a WHO estimated rate of 22 per 1000 total births. Cardiotocography is one procedure used to check whether the fetus is growing as expected. This diagnostic procedure measures the mother's uterine contractions and the fetus' heartbeat, usually in the third trimester of pregnancy when the fetus heart is fully developed. This paper aims to classify the results into one of three states (physiological, suspicious or abnormal) based on cardiotocographic data using machine learning algorithms and compare the accuracies of different ML classification models such as logistic regression, k-nearest neighbor, decision tree, random forest classifier and support vector machine. [ABSTRACT FROM AUTHOR]

The state of India was situated on fertile land and river deltas with appropriate agricultural land. In 2019, agricultural fields, primarily cropland, occupy more than 40% of the country's total surface area. Moreover, agricultural industry revenues less than 3% of the country's Gross Provincial Product (GPP). While manufacturing has become the country's major financial activity, accounting countries represent half of GPP's revenues. The objective of the study is to find a way to improve the financial profitability and efficiency of farming supply chain networks as follows: (1) Fixation of national-level targets for zonal-level groups information after assessment and forecasts that affect production and distribution of agriculture. (2) Producers risk can be reduced by directing people to multiple factory and industrialization options based on market assessment. (3) Insurance costs and reduction of bank borrowing by standardizing the connection between bankers and producers using the structure to centralise land information. (4), Stabilize the agricultural sector by looking at nearby potential destinations for production and regulation of the Public Distribution System (PDS) flow for the security stock. In this paper, the novel ML target prediction algorithm to inform the farmers about the market target product and improve the relationships between the farmer and bankers for centralizing the information about recent government plans. The crop prediction ML algorithm proposed to improve the revenue of agriculture field. [ABSTRACT FROM AUTHOR]

The COVID-19 has affected and threatened the world health system very critically throughout the globe. In order to take preventive actions by the agencies in dealing with such a pandemic situation, it becomes very necessary to develop a system to analyze the impact of environmental parameters on the spread of this virus. Machine learning algorithms and artificial Intelligence may play an important role in the detection and analysis of the spread of COVID-19. This paper proposed a twinned gradient boosting machine (GBM) to analyze the impact of environmental parameters on the spread, recovery, and mortality rate of this virus in India. The proposed paper exploited the four weather parameters (temperature, humidity, atmospheric pressure, and wind speed) and two air pollution parameters (PM2.5 and PM10) as input to predict the infection, recovery, and mortality rate of its spread. The algorithm of the GBM model has been optimized in its four distributions for best performance by tuning its parameters. The performance of the GBM is reported as excellent (where R2 = 0.99) in training for the combined dataset comprises all three outcomes i.e. infection, recovery and mortality rates. The proposed approach achieved the best prediction results for the state, which is worst affected and highest variation in the atmospheric factors and air pollution level. [ABSTRACT FROM AUTHOR]

A significant majority of the population in India makes their living through agriculture. Different illnesses that develop due to changing weather patterns and are caused by pathogenic organisms impact the yields of diverse plant species. The present article analyzed some of the existing techniques in terms of data sources, pre-processing techniques, feature extraction techniques, data augmentation techniques, models utilized for detecting and classifying diseases that affect the plant, how the quality of images was enhanced, how overfitting of the model was reduced, and accuracy. The research papers for this study were selected using various keywords from peer-reviewed publications from various databases published between 2010 and 2022. A total of 182 papers were identified and reviewed for their direct relevance to plant disease detection and classification, of which 75 papers were selected for this review after exclusion based on the title, abstract, conclusion, and full text. Researchers will find this work to be a useful resource in recognizing the potential of various existing techniques through data-driven approaches while identifying plant diseases by enhancing system performance and accuracy. [ABSTRACT FROM AUTHOR]

Data mining and machine learning algorithms' performance is degraded by data of high-dimensional nature due to an issue called "curse of dimensionality". Feature selection is a hot research topic where a subset of features are selected to reduce the dimensionality and thereby increasing the accuracy of learning algorithms. Redundant and irrelevant features are eliminated. Cervical cancer is most commonly occurring disease and driving reasons for untimely mortality among ladies worldwide especially in emerging low income nations like India. However, literature shows that the early identification and exact conclusion of cervical malignant growth can increase the survival chances. The disease does not show signs of its presence in the early stages of its growth. Automated classification and diagnosis of cervical cancer using machine learning and deep learning techniques is in high demand as it allows timely, accurate and regular study of the patient's health progress. Meta-heuristics algorithms provide a global problem independent optimal solution and applied on feature selection problem since decades. In spite of having a good number of literature, there is no survey on feature selection techniques applied to cervical cancer dataset. This paper presents a brief survey on meta-heuristic, its variants, hybrid meta-heuristic and hyper-heuristic techniques. This survey summarizes the feature selection techniques applied to the cervical cancer data to identify the research gap thereby guiding the researchers in the future research direction. The summary of categorization of the techniques such as nature-inspired or non-nature inspired and trajectory or population based is also highlighted. The survey provides a comparative literature review involving classical feature selection techniques and feature selection using metaheuristic algorithms for cervical cancer classification application. [ABSTRACT FROM AUTHOR]

The rampant adoption of digital technologies made momentous changes in all economic sectors. The agriculture sector cannot abstain from the digital revolution. Agriculture and farming are one of the oldest and most important professions in India. The sector remains the backbone of the Indian rural economy, which desperately demands technological impetus for the socio-economic development of rural areas. Smart agriculture is a revolution in the agriculture industry which helps to guide the actions that are required to modify and reorient the agricultural systems. The paper made an extensive survey of various technologies proposed for the agriculture sector. We have surveyed various smart agricultural applications developed and proposed a taxonomy for classifying them. Network infrastructure and connectivity remains the major challenge for rural areas. The paper explores the viability of deploying IoT-based technologies in agricultural sectors along machine learning techniques to optimize resource utilization, planning and cultivation, marketing, pesticide selection, price prediction, etc. An in-depth coverage of recent research works is also mentioned which will help the future researchers to address specific challenge and adopt suitable technology to help the farmers to improve their productivity and better decision making in cultivation. Apart from listing the applications, we also propose an architecture for smart agriculture and implemented smart price prediction model for crops like cotton and cardamom along with a prototype for smart irrigation. [ABSTRACT FROM AUTHOR]

Legal predictive models are of enormous interest and value to legal community. The stakeholders, particularly, the judges and attorneys, can take the best advantages of these models to predict the case outcomes to further augment their future course of actions, for example speeding up decision making, support arguments, strengthening the defense, etc. However, accurately predicting the legal decisions and case outcomes is an arduous process, which involves several complex steps—finding suitable bulk case documents, data extracting, cleansing and engineering, etc. Additionally, the legal complexity further adds to its intricacies. In this paper, we introduce our newly developed Machine Learning (ML)-enabled legal prediction model and its operational prototype, eLegPredict , which successfully predicts the Indian supreme court decisions. The eLegPredict is trained and tested over 3072 supreme court cases and has achieved 76% accuracy (F1-score). The eLegPredict is equipped with a mechanism to aid end users, where as soon as a document with new case description is dropped into a designated directory, the system quickly reads through its content and generates prediction. To our understanding, eLegPredict is one of the first few legal prediction models trying to predict Indian supreme court decisions. [ABSTRACT FROM AUTHOR]

In India and over the world, Cancer has become a deadly disease that is adversely affecting women from different age groups. According to a survey, one in every 30 women suffers from this deadly disease in their lifetime. This project was first thought of because of the increase in cases of breast cancer and if we can detect it at an early stage then there is an increased chance of it getting cured. This paper lays a foundation in making the detection of cancer automated from histopathological images using deep learning algorithms so that more and more people can get it diagnosed at an early stage and subsequently get cured. To enhance the capability of histopathology image classification, a powerful deep learning algorithm and a sizable, varied dataset are required. In this paper, we have proposed an automatic and precise histopathological image analytical method, to detect breast cancer at an early stage. Deep learning techniques have recently made significant strides and produced outstanding results in the fields of computer vision and image processing, which has encouraged many researchers to use this method for the categorization of histopathology images. [ABSTRACT FROM AUTHOR]

Globally, the rapid loss of mangrove forests often creates long-lasting environmental damage alongside coastlines, mudflats, and river banks. All-weather, physical monitoring of such areas is almost impossible because of inaccessibility to swampy areas and a hostile substrate. Subsequently, conventional field surveys are relatively unavailable to monitor human encroachment in coastal areas like the Mumbai mangrove region of India. In this context, the polarimetric synthetic aperture radar (PolSAR) remote sensing tool becomes a potential candidate for mangrove conservation and management. Since the Mumbai mangrove region of India exists over the extensive land cover, the large-scale classification can articulate the continuous encroachment because of the location of human settlements or activities across this metropolitan coastal city. For this, the traditional algorithms need the essential improvisation to apply for large-scale data analysis, aiming simultaneously at getting the highest decisive and time efficiency. Here, we introduce a shallow learning model of MapReduce-based Multi-Layer Perception (MLP) algorithm to classify the hybrid compact polarimetric (CP) and fully polarimetric (FP) feature space. Even though a shallow learning model of the automated method is easily scalable, it requires a distinctive shallow learnable feature set for better land cover classification. In this effort, this paper investigates the efficacy of derived feature space compared to direct polarimetric measurements of sensors and shows that the shallow learnable feature set is more effective with both CP & FP observations. Simultaneously, the relevancy of the proposed distributed model of MLP is also justified compared to distributed extreme learning machine (DELM) algorithm and provides a practically implementable scaled-MLP algorithm of shallow learning model. Ultimately, this paper comes up with a better polarimetric signature of land types for both the CP and FP datasets, which can be used in an alternative manner as per data availability for a multi-sensor data analysis. [ABSTRACT FROM AUTHOR]

Background: This research adds to the growing body of work demonstrating the vital role of image categorization in the medical sector. The efficiency of illness diagnosis is being greatly enhanced using image classification. A brain tumor is a collection of abnormal cells in the brain. Diagnostic precision is required when looking for a tumor in the brain because even the smallest error in human judgement can have disastrous results. To get around this problem, the medical community has implemented an automated brain tumor segmentation system. A variety of methods are employed to segment a brain tumor, but the results are inconsistent. To improve the quality of MRI images, we present our findings in this paper. Deep learning methods for image segmentation and classification are discussed in this paper. Methods: In this paper we a very robust deep learning method for image segmentation and classification. For image classification, we are employing the enhanced faster R-CNN method. The ResNet50 model is used to differentiate between tumor and non-tumor images. The next step in this framework is to use Deep Residual UNET for segmentation. RESUNET is an FCNN that maximizes efficiency. The proposed method works well in terms of its ability to find and classify things accurately. Results: The accuracy rate for identifying tumours in MRI scans using the proposed technique is 94.23%. Using transfer learning with Resnet50 as the base model and the use of discriminative learning rates, our model achieved superior results than other recent models. Conclusion: Within the scope of this study, we have integrated the residual networks with the U-Net to make the network stronger. This strategy improves the efficiency of classification and segmentation tools. To achieve a higher level of accuracy, the model may be trained further, or additional data may be applied in the training process. [ABSTRACT FROM AUTHOR]

In India, in metropolitan cities, a common problem seen is traffic jams or slowdown on traffic due to potholes. Most of the road accidents are due to potholes. In this paper, the authors have tried to ensure that the road surface quality and the potholes should be monitored continuously and must be repaired as necessary. The best possible distribution of resources could be attained when the real-time data is gathered from the mounted sensory system and displayed and visualized in a way (Google Maps) which is comprehensive and empirical. Different sensors would be mounted onto the public transport vehicles. The method mentioned in this paper uses the ultrasonic sensor and the accelerometer to send the data regarding the intensity of pothole straightaway to the cloud data storage, along with the location coordinates of the potholes and the time stamp. Different databases such as traffic density of the city, rain intensity of different areas is used to train different machine learning models to predict the intensity of potholes at the particular locations and get the best possible accuracy. The best-case accuracy attained was 35.5%. The pothole intensity data is visualized through a heat map application. This system helps in reducing the frequency of traffic jams in any city of India. The method suggested in the paper would help in reducing the number of accidents happening in India due to the potholes. [ABSTRACT FROM AUTHOR]

The outbreak of Coronavirus 2019 (COVID‐19) has impacted everyday lives globally. The number of positive cases is growing and India is now one of the most affected countries. This paper builds predictive models that can predict the number of positive cases with higher accuracy. Regression‐based, Decision tree‐based, and Random forest‐based models have been built on the data from China and are validated on India's sample. The model is found to be effective and will be able to predict the positive number of cases in the future with minimal error. The developed machine learning model can work in real‐time and can effectively predict the number of positive cases. Key measures and suggestions have been put forward considering the effect of lockdown. [ABSTRACT FROM AUTHOR]

The future of agriculture may be fully realized using knowledge of artificial intelligence (AI) accumulated by human expertise. With increasing climate change and population pressure challenges, new technologies, such as AI and RS in vital sectors like agriculture is urgently required to assess agricultural suitability, optimize productivity, and then support sustainable development. This paper presents bibliometric and review analyses on AI and geospatial analysis applied to the agricultural field. Based on the prestigious database, Scopus, thousands of documents were retrieved in the period 1992–2021 and processed using Scopus online tool and VOSviewer software. The results show a growing trend in the number of publications during this period. Earth and Planetary Sciences is the top domain, remote sensing (RS) is the leading source, while the United States and India are the most influential countries. RS, machine learning (ML), GIS, land-use, decision-making, decision trees, and satellite imagery are the most occurring topics in this search. Otherwise, research in this field is turning toward ML and deep learning techniques, whereas agricultural robots and antennas are the top trending tools. The current study provides specific information about the connections between artificial intelligence, geospatial analysis, and agriculture in the period 1992–2021, the fruitful period where the AI coupled to geospatial technologies is in full development. [ABSTRACT FROM AUTHOR]

Purpose: This paper aims to identify, prioritise and explore the relationships between the various barriers that are hindering the machine learning (ML) adaptation for analysing accident data information in the Indian petroleum industry. Design/methodology/approach: The preferred reporting items for systematic reviews and meta-analysis (PRISMA) is initially used to identify key barriers as reported in extant literature. The decision-making trial and evaluation laboratory (DEMATEL) technique is then used to discover the interrelationships between the barriers, which are then prioritised, based on three criteria (time, cost and relative importance) using complex proportional assessment (COPRAS) and multi-objective optimisation method by ratio analysis (MOORA). The Delphi method is used to obtain and analyse data from 10 petroleum experts who work at various petroleum facilities in India. Findings: The findings provide practical insights for management and accident data analysts to use ML techniques when analysing large amounts of data. The analysis of barriers will help organisations focus resources on the most significant obstacles to overcome barriers to adopt ML as the primary tool for accident data analysis, which can save time, money and enable the exploration of valuable insights from the data. Originality/value: This is the first study to use a hybrid three-phase methodology and consult with domain experts in the petroleum industry to rank and analyse the relationship between these barriers. [ABSTRACT FROM AUTHOR]

A court of a country is the main source of justice, to the respective country's citizens. Every individual approaches courts to seek justice when his/her rights are violated. The main power house of these courts is the supreme court and each country has its own respective supreme court, in a country like India with a huge population every day hundreds and hundreds of new and appeal cases have been filed to the supreme court and seek justice. The objective of this paper is to classify the cases and to predict the behavior of the court (whether the appeal case will be accepted or dismissed by the Supreme Court). This paper gives the individual an ideology about how the case will be taken and treated by the court. The model considers past 20 years of cases from the Supreme Court of India database containing all types of cases to predict leave granted and Disposed off parameters. The proposed model is tested as three modules (i) classification module (ii) prediction module and (iii) baseline module and also compares various ML algorithms using Accuracy and F-measure as performance metrics. [ABSTRACT FROM AUTHOR]

Diabetes is one of the most prevalent non-communicable diseases and is the 6th leading cause of death worldwide. It's a chronic metabolic disorder which has no cure, however, it is a highly treatable condition, if diagnosed and managed on time to avoid its complications. This paper explores and compares various machine learning (ML) approaches that can help in determining the risk of diabetes at an early stage and aid in improving the medical diagnosis of diabetes. The paper considers two real-world datasets one is a diabetic clinical dataset (DCA) collected from a medical practitioner in the state of Assam, India during the year 2017–2018 and other is public PIMA Indian diabetic dataset. To analyze the various machine learning techniques on DCA and PIMA Indian diabetic datasets for the classification of diabetic and non-diabetic patients, different classifiers like perceptron, Gaussian process, linear discriminant analysis, quadratic discriminant analysis, statistical gradient descent, ridge regression classifier, support vector machines, k-nearest neighbors, decision tree, naïve Bayes, logistic regression, random forest and ELM for multiquadric, RBF, sigmoid activation functions are used. The results of numerical experiments suggested that logistic regression yields better performance in comparison to the other techniques. [ABSTRACT FROM AUTHOR]