Search

A large proportion of photovoltaic (PV) power generation is connected to the power grid, and its volatility and stochasticity have significant impacts on the power system. Accurate PV power forecasting is of great significance in optimizing the safe operation of the power grid and power market transactions. In this paper, a novel dual-channel PV power forecasting method based on a temporal convolutional network (TCN) is proposed. The method deeply integrates the PV station feature data with the model computing mechanism through the dual-channel model architecture; utilizes the combination of multihead attention (MHA) and TCN to extract the multidimensional spatio-temporal features between other meteorological variables and the PV power; and utilizes a single TCN to fully extract the temporal constraints of the power sequence elements. The weighted fusion of the dual-channel feature data ultimately yields the ideal forecasting results. The experimental data in this study are from a 26.52 kW PV power plant in central Australia. The experiments were carried out over seven different input window widths, and the two models that currently show superior performance within the field of PV power forecasting: the convolutional neural network (CNN), and the convolutional neural network combined with a long and short-term memory network (CNN_LSTM), are used as the baseline models. The experimental results show that the proposed model and the baseline models both obtained the best forecasting performance over a 1-day input window width, while the proposed model exhibited superior forecasting performance compared to the baseline model. It also shows that designing model architectures that deeply integrate the data input method with the model mechanism has research potential in the field of PV power forecasting. [ABSTRACT FROM AUTHOR]

To solve the problem of feature selection and error correction after mode decomposition and improve the ability of power load forecasting models to capture complex time series information, a two-stage short-term power load forecasting method based on recursive feature elimination with a cross validation (RFECV) algorithm and time convolution network–efficient channel attention mechanism–long short-term memory network (TCN–ECA–LSTM) is presented. First, the load sequence is decomposed into a relatively stable set of modal components using variational mode decomposition. Then, the RFECV-based method filters the feature set of each modal component to construct the best feature set. Finally, a two-stage prediction model based on TCN–ECA–LSTM is established. The first stage predicts each modal component and the second stage reconstructs the load forecast based on the predicted value of the previous stage. This paper takes actual data from New South Wales, Australia, as an example, and the results show that the method proposed in this paper can build the feature set reliably and efficiently and has a higher accuracy than the conventional prediction model. [ABSTRACT FROM AUTHOR]

There is a long history of coastal erosion caused by frequent storm surges in the coastal regions of Australia, which imposes great threats to communities and infrastructures alongside the beach. Old Bar Beach, New South Wales, Australia, is one such hotspot famous for its extreme coastal erosion. To apply remedial measures such as beach nourishment effectively and economically, estimating/reconstructing the subsurface hydrogeology over the coastal areas is essential. A geophysical tool such as a ground-penetrating radar (GPR) which works on the principle of reflecting electromagnetic (EM) waves, can be conveniently deployed to delineate the soil and rock profiling, water-table depth, bedrock depth, and the subsurface structural features. Here, DeepLabv3+ architecture based newly developed deep convolutional neural networks (DCNNs) were used to establish an inherent non-linear relationship between the GPR data and the EM wave velocity. The presented DCNNs have a lesser number of layers, a lesser number of trainable (learnable) parameters, a high convergence rate and, at the same time, achieve prediction accuracy comparable to that of well-established DeepLabv3+ networks, having high trainable parameters and a relatively low convergence rate. Here, firstly the DCNNs were trained and validated on small 1D datasets. Each dataset contains a 1D GPR trace and a corresponding EM velocity model. The DCNNs turned out to be quite promising in the 1D case, with training, validation, and testing accuracy of approximately 95%, 94%, and 95%, respectively. Secondly, 1D trained weights were applied to 2D synthetic GPR data for EM velocity prediction, and the accuracy of prediction achieved was approximately 95%. Seeing the excellent performance of the DCNNs in the 2D prediction case using 1D trained weights, a large amount of 1D synthetic datasets (approximately 1.2 million) were generated and gaussian noise was added to it to replicate the real field scenario. Thirdly, topographically corrected GPR data acquired over the Old Bar Beach were inverted using the DCNNs trained on 1.2 million 1D synthetic datasets to obtain the subsurface high-resolution, high-precision EM velocity, and ε r distribution information to understand the hydrogeology over the beach. The findings presented in this paper agree well with the previous hydrogeological studies carried out using GPR. Our findings show that DCNNs, along with GPR, can be successfully used in coastal environments for the quick and accurate hydrogeological investigation required for the implementation of coastal erosion mitigation methods such as beach nourishment. [ABSTRACT FROM AUTHOR]

High-precision vector magnetic field detection has been widely used in the fields of celestial magnetic field detection, aeromagnetic detection, marine magnetic field detection and geomagnetic navigation. Due to the large amount of data, the 3D inversion of high-precision magnetic gradient vector data often involves a large number of computational requirements and is very time-consuming. In this paper, a 3D magnetic gradient tensor (MGT) inversion method is developed, based on using a convolutional neural network (CNN) to automatically predict physical parameters from the 2D images of MGT. The information of geometry, depth and parameters such as magnetic inclination (I), magnetic declination (D) and magnetization susceptibility of magnetic anomalies is extracted, and a 3D model is obtained by comprehensive analysis. The method first obtains sufficient MGT data samples by forward modeling of different magnetic anomalies. Then, we use an improved CNN with shear layers to achieve the prediction of each magnetic parameter. The reliability of the algorithm is verified by numerical simulations of synthetic models of multiple magnetic anomalies. MGT data of the Tallawang magnetite diorite deposit in Australia are also predicted by using this method to obtain a slab model that matches the known geological information. The effects of sample size and noise level on the prediction accuracy are discussed. Compared with single-component prediction, the results of multi-component joint prediction are more reliable. From the numerical model study and the field data validation, we demonstrate the capability of using CNNs for inversing MGT data. [ABSTRACT FROM AUTHOR]