Search

Copper slag, a by-product of the pyrometallurgical process used for obtaining copper from copper ore in Bor, Serbia, contains mainly silicon, iron, calcium, and aluminium oxides. Due to such properties, it is disposed of in landfills. Despite the favourable technical properties copper slag aggregates possess, such as low-water absorption (WA24 0.6%), low resistance to fragmentation (LA 10%), and low resistance to wear (MDE 4%), its use in the construction industry is still limited. The results of testing the technical properties of copper slag aggregates (CSAs) as a potential replacement for natural river aggregate (RA) are presented in this paper. The experiments included tests on three concrete mixtures with partial replacement of coarse natural aggregate with copper slag. The replacement of RA particle sizes of 8/16 mm and 16/31.5 mm with CSA in the amount of 20% + 50% and 50% + 50% resulted in an increase in the compressive strength of 12.4% and 10.5%, respectively. The increase of CSA content led to a decrease in water penetration resistance and salt-frost resistance of concrete, whereas the resistance to chloride ion penetration did not change significantly. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Natural Fibers is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Western Australia's housing sector is growing rapidly and around half a million houses are expected to be built by 2030, which not only will result in increased energy and resources demand but will have socio-economic impacts. Majority of Western Australians live in detached houses made of energy intensive clay bricks, which have a high potential to generate construction and demolition (C&D) waste. Therefore, there is a need to look into the use of alternative materials and construction methods. Due to Western Australia's temperate climate, concrete could not only offer a comfortable living space but an operational energy saving also can be achieved. This paper has assessed the global warming implications of cast in-situ concrete sandwich wall system as an alternative to clay brick walls (CBW) with partial replacement of cement in concrete with by-products such as fly ash (FA) and ground granulated blast furnace slag (GGBFS), natural aggregate (NA) with recycled crushed aggregate (RCA), natural sand (NS) with manufactured sand (MS) and, polyethylene terephthalate (PET) foam core as a replacement to polystyrene core for construction of a typical 4 x 2 x 2 detached house in Perth. Life cycle management (LCM) approach has been used to determine global warming reduction benefits due to the use of available by-products and recycled materials inWestern Australian houses. [ABSTRACT FROM AUTHOR]

A vast amount of construction and demolition (C&D) wastes are generated in Western Australia (WA) of which a major portion goes to landfills. The diversion of C&D waste from landfills would be the single most significant opportunity for WA to improve its recovery performance. C&D waste materials have already been investigated for their appropriateness and use in pavement and concrete. This work is the continuation of the authors' previous work involving further experimental tests to prove the structural suitability of a building's structural member (i.e., beam) made of recycled aggregates and industrial by-products. The concrete mixes considered in this study are 100NA+100 OPC (Control), 100RA+100OPC, 50RA+50NA+90OPC+10SF and 50RA+50NA+60OPC+30FA+10SF. The Reinforced Concrete (RC) beam made of 50RA+50NA+60OPC+30FA+10SF concrete mix was found to be the only ecoefficient option. This option has reduced the level of environmental impacts in a cost-competitive manner. The use of this eco-efficient option could also provide new employment opportunities and significant improvements in terms of land and energy resources conservation and bio-diversity enhancement. [ABSTRACT FROM AUTHOR]