Search

Battery energy storage systems can be integrated with photovoltaic (PV)-diesel microgrids as an enabling technology to increase the penetration of PV systems and aid microgrid stability by smoothing out the power fluctuations of the PV systems. This paper focuses on this topic and aims to derive correlations between the optimal capacity of the smoothing batteries and variabilities in the daily solar irradiance. To this end, the two most commonly used moving average and ramp rate control techniques are employed on a real solar irradiance dataset with a 1-min resolution for a full calendar year across 11 sites in Australia. The paper then presents the developed empirical model, based on linear regressions, to estimate the batteries' optimal capacity without requiring detailed simulation studies, which are useful for practitioners at the early stages of a project's feasibility evaluation. The performance of the developed technique is validated through numerical simulation studies in MATLAB®. The study demonstrates that the empirical model provided reasonably accurate estimates when using the moving average smoothing technique but had limited accuracy under the ramp rate control technique. [ABSTRACT FROM AUTHOR]

This paper investigates a comparative study for practical optimal sizing of rooftop solar photovoltaic (PV) and battery energy storage systems (BESSs) for grid-connected houses (GCHs) by considering flat and time-of-use (TOU) electricity rate options. Two system configurations, PV only and PV-BESS, were optimally sized by minimizing the net present cost of electricity for four options of electricity rates. A practical model was developed by considering grid constraints, daily supply of charge of electricity, salvation value and degradation of PV and BESS, actual annual data of load and solar, and current market price of components. A rule-based energy management system was examined for GCHs to control the power flow among PV, BESS, load, and grid. Various sensitivity analyses are presented to examine the impacts of grid constraint and electricity rates on the cost of electricity and the sizes of the components. Although the capacity optimization model is generally developed for any case study, a grid-connected house in Australia is considered as the case system in this paper. It is found that the TOU-Flat option for the PV-BESS configuration achieved the lowest NPC compared to other configuration and options. The optimal capacities of rooftop PV and BESS were obtained as 9 kW and 6 kWh, respectively, for the PV-BESS configuration with TOU-Flat according to two performance metrices: net present cost and cost of electricity. [ABSTRACT FROM AUTHOR]

This paper provides models for managing and investigating the power flow of a grid-connected solar photovoltaic (PV) system with an energy storage system (ESS) supplying the residential load. This paper presents a combination of models in forecasting solar PV power, forecasting load power, and determining battery capacity of the ESS, to improve the overall quality of the power flow management of a grid-connected solar PV system. Big data tools were used to formulate the solar PV power forecasting model and load power forecasting model, in which real historical solar electricity data of actual solar homes in Australia were used to improve the quality of the forecasting models. In addition, the time-of-use electricity pricing was also considered in managing the power flow, to provide the minimum cost of electricity from the grid to the residential load. The output of this model presents the power flow profiles, including the solar PV power, battery power, grid power, and load power of weekend and weekday in a summer season. The battery state-of-charge of the ESS was also presented. Therefore, this model may help power system engineers to investigate the power flow of each system of a grid-connected solar PV system and help in the management decision for the improvement of the overall quality of the power management of the system. [ABSTRACT FROM AUTHOR]

Conventional fossil-fuel-based power systems are undergoing rapid transformation via the replacement of coal-fired generation with wind and solar farms. The stochastic and intermittent nature of such renewable sources demands alternative dispatchable technology capable of meeting system stability and reliability needs. Battery energy storage can play a crucial role in enabling the high uptake of wind and solar generation. However, battery life is very sensitive to the way battery energy storage systems (BESS) are operated. In this paper, we propose a framework to analyse battery operation in the Australian National Electricity Market (NEM) electricity spot and contingency reserve markets. We investigate battery operation in different states of Australia under various operating strategies. By considering battery degradation costs within the operating strategy, BESS can generate revenue from the energy market without significantly compromising battery life. Participating in contingency markets, batteries can substantially increase their revenue with almost no impact on battery health. Finally, when battery systems are introduced into highly volatile markets (such as South Australia) more aggressive cycling of batteries leads to accelerated battery aging, which may be justified by increased revenue. The findings also suggest that with falling replacement costs, the operation of battery energy systems can be adjusted, increasing immediate revenues and moving the battery end-of-life conditions closer. [ABSTRACT FROM AUTHOR]

This paper develops new practical rule-based energy management systems (EMSs) for typical grid-connected houses with solar photovoltaic (PV) and battery by considering different rates for purchasing and selling electricity. The EMSs are developed to supply the household's loads and reduce operating costs of the system based on different options of flat and time-of-use (ToU) rates for buying and selling electricity prices. Four different options are evaluated and compared in this study: (1) Flat-Flat, (2) ToU-Flat, (3) Flat-ToU, and (4) ToU-ToU. The operation cost is calculated based on the electricity exchange with the main grid, the equivalent cost of PV generation, as well as the degradation cost of battery storage. The operation of the grid-connected house with rooftop solar PV and battery is evaluated for a sunny week in summer and a cloudy week in winter to investigate the proper performance for high and low generations of PV. While the developed rule-based EMS are generic and can be applied for any case studies, a grid-connected house in Australia is examined. For this purpose, real data of solar radiation, air temperature, electricity consumption, and electricity rates are used. It is found that the ToU-Flat option has the lowest operating cost for the customers. [ABSTRACT FROM AUTHOR]

Common property (CP) is a significant consumer of electricity in apartment buildings. Although some apartments in Australia have adopted shared microgrid configurations to offset grid consumption, the characteristics and load patterns of CP are rarely discussed due to lack of available data. As common areas normally constitute part of owner corporations, energy distribution in these premises requires attention. This paper presents empirical analysis of the CP load connected to shared solar and battery storage for three apartment complexes located in Perth Australia. Load patterns for CP over a defined dataset period were analyzed, and grid usage reduction was examined by implementing and comparing three energy allocation strategies based on surplus energy utilization. The findings indicated significant grid usage reduction for CP load in different apartments after implementation of three strategies. Instantaneous consumption decreased 72%, and surplus allocation strategy reduced 91%, while consumption-based allocation reduced 76%, of grid electricity. Moreover, consumption-based allocation offered improved cost benefits compared to the other two strategies. The results further revealed the usefulness of energy allocation and effectiveness of surplus energy utilization. Based on outcomes, the strategies provide consolidation with conventional energy trading mechanisms and broadly link to the virtual power plant concept for coordinating energy flows between multiple generators. [ABSTRACT FROM AUTHOR]

Common property (CP) is a significant consumer of electricity in apartment buildings. Although some apartments in Australia have adopted shared microgrid configurations to offset grid consumption, the characteristics and load patterns of CP are rarely discussed due to lack of available data. As common areas normally constitute part of owner corporations, energy distribution in these premises requires attention. This paper presents empirical analysis of the CP load connected to shared solar and battery storage for three apartment complexes located in Perth Australia. Load patterns for CP over a defined dataset period were analyzed, and grid usage reduction was examined by implementing and comparing three energy allocation strategies based on surplus energy utilization. The findings indicated significant grid usage reduction for CP load in different apartments after implementation of three strategies. Instantaneous consumption decreased 72%, and surplus allocation strategy reduced 91%, while consumption-based allocation reduced 76%, of grid electricity. Moreover, consumption-based allocation offered improved cost benefits compared to the other two strategies. The results further revealed the usefulness of energy allocation and effectiveness of surplus energy utilization. Based on outcomes, the strategies provide consolidation with conventional energy trading mechanisms and broadly link to the virtual power plant concept for coordinating energy flows between multiple generators. [ABSTRACT FROM AUTHOR]