Search

In typical alteration extraction methods, e.g., band math and principal component analysis (PCA), the bands or band combinations unitized to extract altered minerals are usually selected based on empirical models or previous rules. This results in significant differences in the alteration of mineral mapping even in the same area, thus greatly increasing the uncertainty of mineral resource prediction. In this paper, an intelligent alteration extraction approach was proposed in which an optimization algorithm, i.e., a genetic algorithm (GA), was introduced into the PCA; this approach is termed GA-PCA and is used for selecting the optimized band combinations of mineralized alterations. The proposed GA-PCA was employed to map iron oxides and hydroxyl minerals using the most commonly adopted multispectral data, i.e., Landsat-8 OLI data, at the Lalingzaohuo polymetallic deposits, China. The results showed that the spectral characteristics of GA-PCA-selected OLI band combinations in the research area were beneficial for enhancing alteration information and were more capable of suppressing the interference of vegetation information. The mapping alteration zones using the GA-PCA approach had a higher agreement with known ore spots, i.e., 25% and 33.3% in ferrous-bearing and hydroxyl-bearing deposits, compared to the classical PCA. Furthermore, two predicted targets (not shown in the classical PCA results) were precisely obtained via analyzing the GA-PCA alteration maps combined with the ore-forming geological conditions of the mine and its tectonic characteristics. This indicated that the intelligent selection of mineral alteration band combinations increased the reliability of remote sensing-based mineral exploration. [ABSTRACT FROM AUTHOR]

Underground coal-mining-induced ground subsidence deformation is a common geological disaster impacting buildings, transportation and water supplies. Models predicting ground subsidence dynamically with high precision are important for the prevention of damage derived from ground subsidence. In this paper, the Hook function is utilized to develop a model describing the velocity of ground subsidence due to underground coal mining. Based on the subsidence velocity model, a dynamic subsidence model is established by taking an integral of the velocity model. Coefficients of the model, which depend on maximum subsidence, maximum subsidence velocity and the time corresponding to the maximum subsidence velocity, are related to the geological and mining conditions of the coal seam being investigated. A Levenberg–Marquardt-algorithm-based method is also proposed to calculate the optimal model coefficients based on subsidence velocity observations. Four continuously operating Global Navigation Satellite System (GNSS) stations were constructed above a typical longwall coal mining working face in the Jining mining area, China. These GNSS stations collected subsidence observations over two years, which were used to validate the developed prediction model. The results show that the root-mean-square (RMS) of the model-predicted ground subsidence error is 56.1 mm, and the maximum relative error is 2.5% for all four GNSS stations, when the ground subsidence is less than 6000 mm. [ABSTRACT FROM AUTHOR]

Long-distance water transfer is a critical engineering measure to rectify disparities in water resource distribution across regions. The effective operation and safety of such projects are paramount to their success, as localized issues can have cascading consequences, potentially disrupting the entire network. Conventional ground-based monitoring methods have limitations in measuring the deformation of large-scale structures. In this paper, InSAR is employed to monitor the deformation of the Shuangwangcheng (SWC) Reservoir, which features a long embankment dam as part of the South-to-North Water Diversion Project in China. We utilize data from both Sentinel-1 and TerraSAR-X satellites to derive 7-year deformation. Results reveal that the entire dam experiences continuous subsidence, with the maximum deformation in the line-of-sight direction measuring ~160 mm. While minor differential settlements are noted in different sections of the dam, the gradient is not significant due to the dam's substantial length. The InSAR deformation results from multiple geometries demonstrate good consistency, with the highest correlation observed between the Sentinel-1 ascending and descending datasets, exceeding 0.9. Validation against the GNSS observations of the three sites on the SWC Dam shows the accuracy of InSAR displacements is ~8 mm. Water level changes do impact deformation, but consolidation settlement appears to be the primary controlling factor during the monitoring period. This study underscores the potential of InSAR in long-distance water transfer projects and highlights that spatially continuous deformation is the most significant advantage. [ABSTRACT FROM AUTHOR]

Forest stock volume is the main factor to evaluate forest carbon sink level. At present, the combination of multi-source remote sensing and non-parametric models has been widely used in FSV estimation. However, the biodiversity of natural forests is complex, and the response of the spatial information of remote sensing images to FSV is significantly reduced, which seriously affects the accuracy of FSV estimation. To address this challenge, this paper takes China's Baishanzu Forest Park with representative characteristics of natural forests as the research object, integrates the forest survey data, SRTM data, and Landsat 8 images of Baishanzu Forest Park, constructs a time series dataset based on survey time, and establishes an FSV estimation model based on the CNN-LSTM-Attention algorithm. The model uses the convolutional neural network to extract the spatial features of remote sensing images, uses the LSTM to capture the time-varying characteristics of FSV, captures the feature variables with a high response to FSV through the attention mechanism, and finally completes the prediction of FSV. The experimental results show that some features (e.g., texture, elevation, etc.) of the dataset based on multi-source data feature variables are more effective in FSV estimation than spectral features. Compared with the existing models such as MLR and RF, the proposed model achieved higher accuracy in the study area (R2 = 0.8463, rMSE = 26.73 m3/ha, MAE = 16.47 m3/ha). [ABSTRACT FROM AUTHOR]

As a major grain-producing region in China, the North China Plain (NCP) faces serious challenges such as water shortage and land subsidence. In late 2014, the Central Route of the South-to-North Water Diversion Project (SNWD-C) began to provide NCP with water resources. However, the effectiveness of this supply in mitigating land subsidence remains a pivotal and yet unassessed aspect. In this paper, we utilized various geodetic datasets, including the Gravity Recovery and Climate Experiment (GRACE) and GRACE Follow On (GRACE-FO), Global Navigation Satellite System (GNSS) and leveling data, to conduct a spatial-temporal analysis of the equivalent water height (EWH) and vertical ground movement in the NCP. The results reveal a noteworthy decline in EWH from 2011 to 2015, followed by a slight increase with minor fluctuations from 2015 to 2020, demonstrating a strong correlation with the water resources supplied by the SNWD-C. The GRACE-derived surface deformation rate induced by hydrological loading is estimated to be <1 mm/yr. In comparison, GNSS-derived vertical ground movements exhibit considerable regional differences during the 2011–2020 period. Substantial surface subsidence is evident in the central and eastern NCP, contrasting with a gradual uplift in the front plain of the Taihang Mountains. Three-stage leveling results indicate that the rate of subsidence in the central and eastern plains is gradually increasing with the depression area expanding from 1960 to 2010. Based on these geodetic results, it can be inferred that the SNWD-C's operation since 2014 has effectively mitigated the reduction in terrestrial water storage in the NCP. However, land subsidence in the NCP persists, as the subsidence rate does not turn around in sync with the change in EWH following the operation of SNWD-C. Consequently, it's necessary to maintain and enforce existing policies, including controlling groundwater exploitation and water resources supply (e.g., SNWD-C) to curtail the exacerbation of land subsidence in the NCP. Additionally, continuous monitoring of land subsidence by GRACE, GNSS, leveling and other geodetic techniques is crucial to enable timely policy adjustments based on monitoring results. [ABSTRACT FROM AUTHOR]

Landslides are common natural disasters that cause serious damage to ecosystems and human societies. To effectively prevent and mitigate these disasters, an accurate assessment of landslide hazards is necessary. However, most traditional landslide hazard assessment methods rely on static assessment factors while ignoring the dynamic changes in landslides, which may lead to false-positive errors in the assessment results. This paper presents a novel landslide hazard assessment method for the Zagunao River basin, China. In this study, an updated landslide inventory was obtained for the Zagunao River basin using data from interferometric synthetic aperture radar (InSAR) and optical images. Based on this inventory, a landslide susceptibility map was developed using a random forest algorithm. Finally, an evaluation matrix was created by combining the results of deformation rates from both ascending and descending data to establish a hazard level that considers surface deformation. The method presented in this study can reflect recent landslide hazards in the region and produce dynamic assessments of regional landslide hazards. It provides a basis for the government to identify and manage high-risk areas. [ABSTRACT FROM AUTHOR]

Ponds constitute a pivotal component of aquatic ecosystems. The aquatic ecosystem of the Huai River Basin (HRB) in China was once damaged by severe pollution, and numerous ponds in the basin have not been secured. In this paper, Shenqiu County, a typical county in HRB with many ponds, is selected. Based on high-resolution images with ALOS in 2010, GF-2 in 2016, and GF-1 in 2022, we employed discriminant analysis (DA), classification and regression tree, support vector machine, and random forest to extract the ponds based on object-oriented and further analyzed the spatial-temporal variations of the ponds in this county. The results of the DA in these three years exhibited a higher kappa coefficient (>0.7), and overall accuracy (>75%), signifying superior performance when compared to the other three methods. There were 4625, 5315, and 4748 ponds in 2010, 2016, and 2022, with a total area of 12.87, 11.99, and 9.37 km2, respectively. The number of ponds had a trend of rising in the initial period (2010–2016) and falling later (2016–2022), while the total area revealed a continuous decline. Meanwhile, these ponds showed a clustering phenomenon with three main clustering areas, and the scope of the clustering areas also changed to a certain extent from 2010 to 2022. Our study offers valuable methodological support for the ecological monitoring and management of water environments in regions characterized by a dense concentration of ponds. The crucial data related to ponds in this study will help inform both environmental and social development initiatives within the area. [ABSTRACT FROM AUTHOR]

In recent years, numerous ancient landslides initially triggered by historic earthquakes on the eastern Tibetan Plateau have been reactivated by fault activity and heavy rainfall, causing severe human and economic losses. Previous studies have indicated that short-term heavy rainfall plays a crucial role in the reactivation of ancient landslides. However, the deformation behavior and reactivation mechanisms of seasonal rainfall-induced ancient landslides remain poorly understood. In this paper, taking the Dandu ancient landslide as an example, field investigations, ring shear experiments, and interferometric synthetic aperture radar (InSAR) deformation monitoring were performed. The cracks in the landslide, formed by fault creeping and seismic activity, provide pathways for rainwater infiltration, ultimately reducing the shear resistance of the slip zone and causing reactivation and deformation of the Dandu landslide. The deformation behavior of landslides is very responsive to seasonal rainfall, with sliding movements beginning to accelerate sharply during the rainy season and decelerating during the dry season. However, this response generally lags by several weeks, indicating that rainfall takes time to infiltrate into the slip zone. These research results could help us better understand the reactivation mechanism of ancient landslides triggered by seasonal rainfall. Furthermore, these findings explain why many slope failures take place in the dry season, which typically occurs approximately a month after the rainy season, rather than in the rainy season itself. [ABSTRACT FROM AUTHOR]

This paper comprehensively analyzed two consecutive tornado events associated with heavy precipitation during the Mei-yu season (a period of continuous rainy weather that occurs in the middle and lower reaches of the Yangtze River in China from mid-June to mid-July each year) and detailed the formation and development process of the tornadoes using Doppler weather radar, wind profiler radar, ERA5 reanalysis data, ground automatic station data and other multi-source data. The results showed that: (1) Small-scale vortices were triggered and developed during the eastward movement of the low vortex, forming two tornadoes successively on the eastern section of the Mei-yu front. (2) The presence of a gap on the front side of the reflectivity factor profile indicated that strong incoming airflow entered the updraft. Mesocyclones were detected with decreasing heights and increasing shear strengths. The bottom height of the tornado vortex signature (TVS) dropped to 0.7 km, and the shear value increased to 55.4 × 10−3 s−1. Tornado debris signatures (TDSs) could be seen with a low cross-correlation coefficient (CC) value area of 0.85–0.9 in the mesocyclone. The difference between the lowest-level difference velocity (LLDV) and the maximum difference velocity (MXDV) reached the largest value when a tornado occurred. (3) The continuously enhanced low-level jet propagated downward to form a super-low-level jet, and the strong wind direction and wind speed convergence in the boundary layer created a warm, moist and unstable atmosphere in Suzhou. With the entrainment of dry air, the northwest dry jet and the southeast moist jet stimulated the formation of a miniature supercell. (4) The low-level vertical wind shear of 0–1 km increased significantly upon tornado occurrence, which was more conducive to the formation and intensification of horizontal vorticity tubes. Encountering updrafts and downdrafts, the vorticity tubes might have been stretched and intensified. The first lightning jumps appeared 15 min and 66 min earlier than the Kunshan Bacheng tornado and the Taicang Liuhe tornado. The Liuhe tornado occurred during the stage when the lightning frequency reached its peak and then fell back. [ABSTRACT FROM AUTHOR]

This article takes the measured Total Electron Content (TEC) from the GPS points of the China Regional Crust Observation Network as the starting point to establish a regional ionospheric empirical model. The model's performance is enhanced by considering solar flux and geomagnetic activity data. The refinement function model of the ionospheric TEC diurnal variation component, seasonal variation component, and geomagnetic component is studied. Using the nonlinear least squares method to fit undetermined coefficients, MEFM-ITCR (Multi-parameter Empirical Fusion Model–Ionospheric TEC China Regional Model) is proposed to forecast the regional ionosphere TEC in China. The results show that the standard deviation of MEFM-ITCR residuals is 3.74TECU, and MEFM-ITCR fits the modeling dataset well. Analyses of geographic location variation, seasonal variation, and geomagnetic disturbance were carried out for MEFM-ITCR performance. The results indicate that in the Chinese region, MEFM-ITCR outperforms IRI2020 and NeQuick2 models in terms of forecast accuracy, linear correlation, and model precision for TEC measured using GPS points under different latitudes and longitudes, different seasons, and different geomagnetic disturbances. The empirical TEC model built for the Chinese region in this paper provides a new ionospheric delay correction method for GNSS single frequency users and is of great significance for establishing other new and improving existing ionospheric empirical models. [ABSTRACT FROM AUTHOR]

Drought is a complex natural hazard that affects various regions of the world, causing significant economic and environmental losses. Accurate and timely monitoring and forecasting of drought conditions are essential for mitigating their impacts and enhancing resilience. Satellite-based drought indices have the advantage of providing spatially continuous and consistent information on drought severity and extent. A new drought product was developed from the thermal infrared observations of the Fengyun (FY) series of satellites. We proposed a data fusion algorithm to combine multiple FY satellites, including FY-2F, FY-2G, and FY-4A, to create a long time series of a land surface temperature (LST) data set without systematic bias. An FY drought index (FYDI) is then derived by coupling the long-term LST data set with the surface–atmospheric energy exchange model at 4 km spatial resolution over China from 2013 to present. The performance and reliability of the new FYDI product are evaluated in this study by comparing it with the Meteorological-drought Composite Index (MCI), one of the authoritative drought monitoring indices used in the Chinese meteorological services. The main objectives of this paper are: (1) to evaluate the performance of the FYDI in capturing the spatiotemporal patterns of drought events over China; (2) to quantitively analyze the consistency between the FYDI and MCI products; and (3) to explore the advantages and limitations of the FYDI for drought monitoring and assessment. The preliminary results show that the FYDI product has good agreement with the MCI, indicating that the FYDI can effectively identify the occurrence, duration, severity, and frequency of drought events over China. These two products have a strong correlation in terms of drought detection, with a correlation coefficient of approximately 0.7. The FYDI was found to be particularly effective in the regions where ground observation is scarce, with the capability of reflecting the spatial heterogeneity and variability of drought patterns more clearly. Overall, the FYDI can be a useful measure for operational drought monitoring and early warning, complementing the existing ground-based MCI drought indices. [ABSTRACT FROM AUTHOR]

Continuous evapotranspiration (ET) data with high spatial resolution are crucial for water resources management in irrigated agricultural areas in arid regions. Many global ET products are available now but with a coarse spatial resolution. Spatial-temporal fusion methods, such as the spatial and temporal adaptive reflectance fusion model (STARFM), can help to downscale coarse spatial resolution ET products. In this paper, the STARFM model is improved by incorporating the temperature vegetation dryness index (TVDI) into the data fusion process, and we propose a spatial and temporal adaptive evapotranspiration downscaling method (STAEDM). The modified method STAEDM was applied to the 1 km SSEBOP ET product to derive a downscaled 30 m ET for irrigated agricultural fields of Northwest China. The STAEDM exhibits a significant improvement compared to the original STARFM method for downscaling SSEBOP ET on Landsat-unavailable dates, with an increase in the squared correlation coefficients (r2) from 0.68 to 0.77 and a decrease in the root mean square error (RMSE) from 10.28 mm/10 d to 8.48 mm/10 d. The ET based on the STAEDM additionally preserves more spatial details than STARFM for heterogeneous agricultural fields and can better capture the ET seasonal dynamics. The STAEDM ET can better capture the temporal variation of 10-day ET during the whole crop growing season than SSEBOP. [ABSTRACT FROM AUTHOR]

Accurately grasping the distribution and area of cotton for agricultural irrigation scheduling, intensive and efficient management of water resources, and yield estimation in arid and semiarid regions is of great significance. In this paper, taking the Xinjiang Shihezi oasis agriculture region as the study area, extracting the spectroscopic characterization (R, G, B, panchromatic), texture feature (entropy, mean, variance, contrast, homogeneity, angular second moment, correlation, and dissimilarity) and characteristics of vegetation index (normalized difference vegetation index/NDVI, ratio vegetation index/DVI, difference vegetation index/RVI) in the cotton flowering period before and after based on GF-6 image data, four models such as the random forests (RF) and deep learning approach (U-Net, DeepLabV3+ network, Deeplabv3+ model based on attention mechanism) were used to identify cotton and to compare their accuracies. The results show that the deep learning model is better than that of the random forest model. In all the deep learning models with three kinds of feature sets, the recognition accuracy and credibility of the DeepLabV3+ model based on the attention mechanism are the highest, the overall recognition accuracy of cotton is 98.23%, and the kappa coefficient is 96.11. Using the same Deeplabv3+ model based on an attention mechanism with different input feature sets (all features and only spectroscopic characterization), the identification accuracy of the former is much higher than that of the latter. GF-6 satellite image data in the field of crop type recognition has great application potential and prospects. [ABSTRACT FROM AUTHOR]

The high-precision prediction of sea clutter reflectivity is helpful in improving the performance of marine radar and sea surface remote sensing capabilities. Under the same sea state, when the significant wave height, wave period, wind speed, and other marine environmental parameters are different, the backward reflectivity of the sea clutter corresponding to the wave structure is not the same. Due to the complex and variable nature of sea clutter characteristics across various wave structures, a meticulous classification of wave structures by integrating multiple marine environmental parameters enables the achievement of the high-precision prediction of sea clutter reflectivity. In this study, utilizing measured data of diverse marine environmental parameters in the Yellow Sea, China, we applied the Affinity Propagation algorithm to data clustering. Based on the clustering outcomes, we accomplished a refined classification of wave structures and developed a discriminant model to precisely classify the refined wave structure, facilitating the categorization of new data. In order to achieve more accurate predictions of sea clutter reflectivity, this paper proposes a deep neural network model named GIT-HYB-DNN, which combines the empirical models GIT and HYB. The GIT-HYB-DNN model is applied to predict the reflectivity for each wave structure category separately. The results demonstrate that the root mean square errors of sea clutter reflectivity predictions for different wave structure categories in this study range from 0.62 dB to 0.84 dB. The prediction errors are significantly reduced compared to the root mean square error of 1.08 dB, which was obtained without refined wave structure classification. This study holds theoretical significance and practical value for the investigation of sea clutter characteristics and the selection of radar parameters. [ABSTRACT FROM AUTHOR]

Precipitation datasets derived from reanalysis products play a crucial role in weather forecasting and hydrological applications. This paper aims to evaluate the performance of two distinct reanalysis precipitation products, i.e., the first-generation Chinese global land-surface reanalysis precipitation product (CRA40) and the fifth-generation European reanalysis precipitation product (ERA5), over mainland China. The evaluation is based on continuous and categorical statistical indicators with daily-scale gridded-point rain gauge data obtained from Chinese surface meteorological stations. The findings of this study can be summarized as follows: (1) CRA40 demonstrates a clear superiority over ERA5 in terms of the 13-year daily mean precipitation and seasonal daily precipitation. CRA40 exhibits better correlation coefficients (0.97), relative biases (5.25%), root mean square errors (0.34 mm), and fractional standard errors (0.05). (2) Both reanalyzed precipitation products generally exhibit an overestimation of precipitation in mainland China. The degree of overestimation is particularly pronounced in dry climatic regions (e.g., QZ, XJ), while wet regions (e.g., CJ, HN) demonstrate relatively less overestimation. (3) ERA5 shows better performance in the detection of daily precipitation. Neither CRA40 nor ERA5 can capture heavy precipitation events well. These findings are expected to advance our understanding of the strengths and limitations of the reanalysis precipitation products, CRA40 and ERA5, over China. [ABSTRACT FROM AUTHOR]

China accomplished a historic milestone in 2020 when the mission Chang'e-5 (CE-5) to the Lunar's surface was successfully launched. An extraordinary component of this mission is the "Lunar Regolith Penetrating Radar" (LRPR) housed within its lander, which currently stands as the most advanced payload in terms of vertical resolution among all penetrating radars employed in lunar exploration. This provides an unprecedented opportunity for high-precision research into the interior structure of the shallow lunar regolith. Previous studies have achieved fruitful research results based on the data from LRPR, updating our perception of the shallow-level regolith of the Moon. This paper provides an overview of the new advancements achieved by the LRPR in observing the basic structure of the shallow regolith of the Moon. It places special emphasis on the role played by the LRPR in revealing details about the shallow lunar regolith's structure, its estimated dielectric properties, the provenance of the regolith materials from the landing area, and its interpretation of the geological stratification at the landing site. Lastly, it envisions the application and developmental trends of in situ radar technology in future lunar exploration. [ABSTRACT FROM AUTHOR]

Central business districts (CBDs) play a crucial role in urban economic activities. Thus, the location and boundaries of CBDs identified by the unified standards are essential for comparative analyses in urban geography. However, past research mainly applied specific data or sensitive methods to delimitate CBDs within local knowledge in the case study, there remains no automated standardization technique for identifying and delimitating CBDs across the globe. This paper proposed a new method for identifying CBDs based on nighttime lights (NTL) to overcome the above limitations. The main advantages of this method include (1) the use of available high-quality global Black Marble products, which are the basis of a standardized delineation of CBDs and (2) the use of more characteristics of CBD (i.e., the brightness) and NTL negative angular effects that can reflect high-rise building. The proposed method was employed in 14 cities in China and the U.S., and the results showed that China cities needed five NTL indexes and U.S. cities needed two NTL indexes to distinguish CBD and non-CBD successfully. Therefore, our approach is recommended for CBD detection and delineation over large areas. [ABSTRACT FROM AUTHOR]

The offshore China (OC) region is a significant sea area in the Western Pacific and many researchers have been interested in the distribution of sea surface temperature (SST) fronts in this area. In this study, the Cayula and Cornillon single image edge detection algorithm was used to detect SST fronts using the Daily Optimum Interpolation Sea Surface Temperature data from 1982 to 2021. The results revealed that there are eighteen SST fronts in OC— three in the Bohai Sea, seven in the Yellow Sea, two in the East China Sea, five in the South China Sea, one in the Pacific Ocean east of Taiwan province, China—and among them a new front was detected in the Yellow Sea and named the Yellow Sea Ring Front. The frequency of most fronts showed a tendency of initially increasing and then decreasing from January to September, followed by a trend of growing steadily from October to December. The frequency of a few fronts showed a decreasing tendency from January to September and an increasing tendency from October to December. The frequency of most fronts is highest in winter and lowest in summer. In spring and autumn, the frequency of most fronts is lower than that in winter and higher than that in summer. The annual average frontal probability of five-ninths of the fronts showed an upward trend, and the annual average frontal probability value of one-third of the fronts showed a downward trend. The rest of the fronts showed a stable trend. The results of this paper also showed that the Liaodong Bay Front and the Bohai-Laizhou Bay Front did not form a complete front, as previously reported. In addition, the frontal probability of the Bohai Front to the north of 39° N was in the tendency of decreasing. [ABSTRACT FROM AUTHOR]

The radio determination service system (RDSS), a navigation and positioning system independently developed by China, features services such as short-message communication, position reporting, and international search and rescue. The L-band pseudo-range and phase data are the primary data sources in precise orbit determination (POD) for geostationary Earth orbit (GEO) satellite in the BeiDou system, especially in the orbit manoeuvre period. These data are the only data sources in the POD for GEOs. However, when the pseudo-range and phase data is abnormal due to unforeseen reasons, such as satellite hardware failure or monitoring receiver abnormalities, the data abnormality leads to orbit determination abnormalities or even failures for GEOs, then the service performance and availability of the RDSS system are greatly degraded. Therefore, a new POD method for GEOs based on BeiDou short-message communication ranging data has gained research attention to improve the service reliability of the BeiDou navigation satellite system (BDS)-3, realising the deep integration of communication and navigation services of the BDS. This problem has not been addressed so far. Therefore, in this study, a new POD method for GEO satellites is investigated using high-precision satellite laser ranging (SLR) data and RDSS data. The SLR data are used as the benchmark to calibrate the time delay value of RDSS equipment, and RDSS data are only used in the orbit determination process by fixing the corrected RDSS time delay value, and the satellite orbit parameters and dynamic parameters are solved. Experimental analysis is conducted using the measured SLR and RDSS data of the BDS, and the orbit accuracy in this paper is evaluated by the precise ephemeris of the Multi-GNSS pilot project (MGEX) and SLR data. The results show that the orbit accuracy in the orbital arc and the 2-h orbital prediction arc for GEOs are 6.01 m and 6.99 m, respectively, compared with the ephemeris of MGEX, and the short-arc orbit accuracy after 4 h of manoeuvring is 11.11 m. The orbit accuracy in the radial component by SLR data is 0.54 m. The required orbit accuracy for GEO satellites in the RDSS service of the BDS-3 is 15 m. The orbit accuracy achieved in this paper is superior to that of this technical index. This method expands the application field of the RDSS data and greatly enriches the POD method for GEOs. It can be adopted as a backup technology for the POD method for GEOs based on RNSS data, significantly improving the service reliability of the BeiDou RDSS service. [ABSTRACT FROM AUTHOR]

As one of the most prevailing geodetic tools, the interferometric synthetic aperture radar (InSAR) technique can accurately obtain co-seismic displacements, but is limited to the one-dimensional line-of-sight (LOS) measurement. It is therefore difficult to completely reveal the real three-dimensional (3D) surface displacements with InSAR. By employing azimuth displacement observations from pixel offset tracking (POT) and multiple aperture InSAR (MAI) techniques, 3D displacements of large-magnitude earthquakes can be obtained by integrating the ascending and descending data. However, this method cannot be used to accurately realize the 3D surface displacement measurements of small-magnitude earthquakes due to the low accuracies of the POT/MAI-derived azimuth displacement measurements. In this paper, an alternative method is proposed to calculate co-seismic 3D displacements from ascending and descending InSAR-LOS observations with the dislocation model-based displacement direction constraint. The main contribution lies in the two virtual observation equations that are obtained from the dislocation model-based forward-modeling 3D displacements, which are then combined with the ascending/descending InSAR observations to calculate the 3D displacements. The basis of the two virtual observation equations is that the directions of the 3D displacement vectors are very similar for real and model-based 3D displacements. In addition, the weighted least squares (WLS) method is employed to solve the final 3D displacements, which aims to consider and balance the possible errors in the InSAR observations as well as the dislocation model-based displacement direction constraint. A simulation experiment demonstrates that the proposed method can achieve more accurate 3D displacements compared with the existing methods. The co-seismic 3D displacements of the 2020 Nima earthquake are then accurately obtained by the proposed method. The results show that co-seismic displacements are dominated by the vertical displacement, the magnitude of the horizontal displacement is relatively small, and the overall displacement pattern fits well with the tensile rupture. [ABSTRACT FROM AUTHOR]

A forest fire susceptibility map generated with the fire susceptibility model is the basis of fire prevention resource allocation. A more reliable susceptibility map helps improve the effectiveness of resource allocation. Thus, further improving the prediction accuracy is always the goal of fire susceptibility modeling. This paper developed a forest fire susceptibility model based on an ensemble learning method, namely light gradient boosting machine (LightGBM), to produce an accurate fire susceptibility map. In the modeling, a subtropical national forest park in the Jiangsu province of China was used as the case study area. We collected and selected eight variables from the fire occurrence driving factors for modeling based on correlation analysis. These variables are from topographic factors, climatic factors, human activity factors, and vegetation factors. For comparative analysis, another two popular modeling methods, namely logistic regression (LR) and random forest (RF) were also applied to construct the fire susceptibility models. The results show that temperature was the main driving factor of fire in the area. In the produced fire susceptibility map, the extremely high and high susceptibility areas that were classified by LR, RF, and LightGBM were 5.82%, 18.61%, and 19%, respectively. The F1-score of the LightGBM model is higher than the LR and RF models. The accuracy of the model of LightGBM, RF, and LR is 88.8%, 84.8%, and 82.6%, respectively. The area under the curve (AUC) of them is 0.935, 0.918, and 0.868, respectively. The introduced ensemble learning method shows better ability on performance evaluation metrics. [ABSTRACT FROM AUTHOR]

Since 2002, China has launched four Haiyang-1 (HY-1) satellites equipped with the Chinese Ocean Color and Temperature Scanner (COCTS), which can observe the sea surface temperature (SST). The planned new generation ocean color observation satellites also carry a sensor for observing the SST represented by the payload in this paper. We analyze the spectral brightness temperature (BT) difference between the payload and the Moderate Resolution Imaging Spectroradiometer (MODIS) onboard Terra for the thermal infrared channels (11 and 12 µm) based on atmospheric radiative transfer simulation. The bias and standard deviation (SD) of spectral BT difference for the 11 µm channel are −0.12 K and 0.15 K, respectively, and those for the 12 µm channel are −0.10 K and 0.03 K, respectively. When the total column water vapor (TCWV) decreases from the oceans near the equator to high-latitude oceans, the spectral BT difference of the 11 µm channel varies from a positive deviation to a negative deviation, and that of the 12 µm channel basically remains stable. By correcting the MODIS BT observation using the spectral BT differences, we produce the simulated BT data for the thermal infrared channels of the payload, and then validate it using the Infrared Atmospheric Sounding Interferometer (IASI) carried on METOP-B. The validation results show that the bias of BT difference between the payload and IASI is −0.22 K for the 11 µm channel, while it is −0.05 K for the 12 µm channel. The SD of both channels is 0.13 K. In this study, we provide the simulated BT dataset for the 11 and 12 µm channels of a payload for the retrieval of SST. The simulated BT dataset corrected may be used to develop SST-retrieval algorithms. [ABSTRACT FROM AUTHOR]

Vegetation is an important type of land cover. Long-term, large-scale, and high-precision vegetation monitoring is of great significance for ecological environment investigation and regional sustainable development in protected areas. This paper develops a long-term remote sensing monitoring method for vegetation by calculating the normalized difference vegetation index (NDVI) based on the Google Earth Engine (GEE) cloud platform and Landsat satellite remote sensing images. First, based on Landsat long-term satellite images and GEE, the spatiotemporal distribution map of the NDVI is accurately drawn. Subsequently, the NDVI is accurately classified, and the time trend analysis of the NDVI is conducted based on the NDVI mean trend graphs, transition matrices, etc. Then, combined with Moran's I, high/low clusters, and other methods, the spatial pattern characteristics of the NDVI are analyzed. Finally, climate factors, terrain factors, and anthropologic factors are considered comprehensively. An analysis of the factors affecting the evolution of the NDVI is performed. Taking Zhoushan Island, China, as an example, an experiment is conducted, and the results reveal that (1) the average NDVI exhibits a decreasing trend from 1985 to 2022, decreasing from 0.53 in 1985 to 0.46 in 2022. (2) Regarding vegetation index transitions, the high NDVI areas (0.6–1) exhibit the most substantial shift toward moderately high NDVI values (0.4–0.6), covering an area of 83.10 km2. (3) There is an obvious spatial agglomeration phenomenon in the NDVI on Zhoushan Island. The high-high NDVI clusters and the significant hot spots are predominantly concentrated in the island's interior regions, while the low-low NDVI clusters and the significant cold spots are mainly situated along the coastal areas. (4) The DEM, slope, and temperature have a greater influence among the single factors on the spatial pattern distribution of the NDVI in 2015. There are significant differences in the spatial pattern distribution of the NDVI between the temperature and DEM, temperature and slope, DEM and precipitation, slope and precipitation, aspect and population, and aspect and gross domestic product (GDP). The DEM and slope, DEM and temperature, and DEM and population are three sets of factors with a strong influence on spatial pattern interaction. This study provides data support for the scientific management of vegetation resources on Zhoushan Island and is of great significance to the sustainable development of the island region. [ABSTRACT FROM AUTHOR]

The size of snow grains is an important parameter in cryosphere studies. It is the main parameter affecting snow albedo and can have a feedback effect on regional climate change, the water cycle and ecological security. Larger snow grains increase the likelihood of light absorption and are important for passive microwave remote sensing, snow physics and hydrological modelling. Snow models would benefit from more observations of surface grain size. This paper uses an asymptotic radiative transfer model (ART model) based on MOD09GA ground reflectance data. A simulation of snow grain size (SGS) in northeast China from 2001 to 2019 was carried out using a two-channel algorithm. We verified the accuracy of the inversion results by using ground-based observations to obtain stratified snow grain sizes at 48 collection sites in northeastern China. Furthermore, we analysed the spatial and temporal trends of snow grain size in Northeastern China. The results show that the ART model has good accuracy in inverting snow grain size, with an RMSD of 65 μm, which showed a non-significant increasing trend from 2001 to 2019 in northeast China. The annual average SGS distribution ranged from 430.83 to 452.38 μm in northeast China, 2001–2019. The mean value was 441.78 μm, with an annual increase of 0.26 μm/a, showing a non-significant increasing trend and a coefficient of variation of 0.014. The simulations show that there is also intermonth variation in SGS, with December having the largest snow grain size with a mean value of 453.92 μm, followed by January and February with 450.77 μm and 417.78 μm, respectively. The overall spatial distribution of SGS in the northeastern region shows the characteristics of being high in the north and low in the south, with values ranging from 380.248 μm to 497.141 μm. Overall, we clarified the size and distribution of snow grains over a long time series in the northeast. The results are key to an accurate evaluation of their effect on snow–ice albedo and their radiative forcing effect. [ABSTRACT FROM AUTHOR]

Landslides pose significant and serious geological threat disasters worldwide, threatening human lives and property; China is particularly susceptible to these disasters. This paper focuses on Pengyang County, which is situated in the Ningxia Hui Autonomous Region of China, an area prone to landslides. This study investigated the application of machine learning techniques for analyzing landslide susceptibility. To construct and validate the model, we initially compiled a landslide inventory comprising 972 historical landslides and an equivalent number of non-landslide sites (Data sourced from the Pengyang County Department of Natural Resources). To ensure an impartial evaluation, both the landslide and non-landslide datasets were randomly divided into two sets using a 70/30 ratio. Next, we extracted 15 landslide conditioning factors, including the slope angle, elevation, profile curvature, plan curvature, slope aspect, TWI (topographic wetness index), TPI (topographic position index), distance to roads and rivers, NDVI (normalized difference vegetation index), rainfall, land use, lithology, SPI (stream power index), and STI (sediment transport index), from the spatial database. Subsequently, a correlation analysis between the conditioning factors and landslide occurrences was conducted using the certainty factor (CF) method. Three landslide models were established by employing logistic regression (LR), functional trees (FTs), and random subspace functional trees (RSFTs) algorithms. The landslide susceptibility map was categorized into five levels: very low, low, medium, high, and very high susceptibility. Finally, the predictive capability of the three algorithms was assessed using the area under the receiver operating characteristic curve (AUC). The better the prediction, the higher the AUC value. The results indicate that all three models are predictive and practical, with only minor discrepancies in accuracy. The integrated model (RSFT) displayed the highest predictive performance, achieving an AUC value of 0.844 for the training dataset and 0.837 for the validation dataset. This was followed by the LR model (0.811 for the training dataset and 0.814 for the validation dataset) and the FT model (0.776 for the training dataset and 0.760 for the validation dataset). The proposed methods and resulting landslide susceptibility map can assist researchers and local authorities in making informed decisions for future geohazard prevention and mitigation. Furthermore, they will prove valuable and be useful for other regions with similar geological characteristics features. [ABSTRACT FROM AUTHOR]

The simulation and prediction of coastline changes are of great significance for the development and scientific management of coastal zones. Coastline changes are difficult to capture completely but appear significantly periodic over a long time series. In this paper, the transformer model is used to learn the changing trend of the coastline so as to deduce the position of the coastline in the coming year. First, we use the distance regularization level set evolution (DRLSE) model for instantaneous waterline extraction (IWE) from preprocessed Landsat time-series images from 2010–2020 in Weitou Bay, China. Then, tidal correction (TC) is performed on the extracted instantaneous waterline dataset to obtain coastlines projected to a single reference tidal datum. Finally, the coastline datasets from 2010–2019 are used for model training, and the coastline in 2020 is used for accuracy assessment. Three precision evaluation methods, including receiver operating characteristic curve matching, the mean offset, and the root mean square error, were used to verify the predicted coastline data. The receiver operating characteristic curve was specifically designed and improved to evaluate the accuracy of the obtained coastline. Compared with the support vector regression (SVR) and long–short-term memory (LSTM) methods, the results showed that the coastline predicted by the transformer model was the closest to the accurate extracted coastline. The accuracies of the correct values corresponding to SVR, LSTM, and transformer models were 88.27%, 94.08%, and 98.80%, respectively, which indicated the accuracy of the coastline extraction results. Additionally, the mean offset and root mean square error were 0.32 pixels and 0.57 pixels, respectively. In addition, the experimental results showed that tidal correction is important for coastline prediction. Moreover, through field investigations of coastlines, the predicted results obtained for natural coastlines were more accurate, while the predicted results were relatively poor for some artificial coastlines that were intensely influenced by human activities. This study shows that the transformer model can provide natural coastline changes for coastal management. [ABSTRACT FROM AUTHOR]

Remote-sensing images of high spatial resolution (HSR) are valuable sources of fine-grained spatial information for various applications, such as urban surveys and governance. There is continuing research on positional errors in remote-sensing images and their impacts in geoprocessing and applications. This paper explores the combined use of multi-point geostatistics (MPS), machine learning—in particular, generalized additive modeling (GAM)—and computer-image correlation for characterizing positional errors in images—in particular, HSR images. These methods are employed because of the merits of MPS in being flexible for non-parametric and joint simulation of positional errors in X and Y coordinates, the merits of GAM in being capable of handling non-stationarity in-positional errors through error de-trending, and the merits of computer-image correlation in being cost-effective in furnishing the training data (TD) required in MPS. Procedurally, image correlation is applied to identify homologous image points in reference-test image pairs to extract image displacements automatically in constructing TD. To cope with the complexity of urban scenes and the unavailability of truly orthorectified images, visual screening is performed to clean the raw displacement data to create quality-enhanced TD, while manual digitization is used to obtain reference sample data, including conditioning data (CD), for MPS and test data for performance evaluation. GAM is used to decompose CD and TD into trends and residuals. With CD and TD both de-trended, the direct sampling (DS) algorithm for MPS is applied to simulate residuals over a simulation grid (SG) at 80 m spatial resolution. With the realizations of residuals and, hence, positional errors generated in this way, the means, standard deviation, and cross correlation in bivariate positional errors at SG nodes are computed. The simulated error fields are also used to generate equal-probable realizations of vertices that define some road centerlines (RCLs), selected for this research through interpolation over the aforementioned simulated error fields, leading to error metrics for the RCLs and for the lengths of some RCL segments. The enhanced georectification of the RCLs is facilitated through error correction. A case study based in Shanghai municipality, China, was carried out, using HSR images as part of generalized point clouds that were developed. The experiment results confirmed that by using the proposed methods, spatially explicit positional-error metrics, including means, standard deviation, and cross correlation, can be quantified flexibly, with those in the selected RCLs and the lengths of some RCL segments derived easily through error propagation. The reference positions of these RCLs were obtained through error correction. The positional accuracy gains achieved by the proposed methods were found to be comparable with those achieved by conventional image georectification, in which the CD were used as image-georectification control data. The proposed methods are valuable not only for uncertainty-informed image geolocation and analysis, but also for integrated geoinformation processing. [ABSTRACT FROM AUTHOR]

Road extraction is crucial in urban planning, rescue operations, and military applications. Compared to traditional methods, using deep learning for road extraction from remote sensing images has demonstrated unique advantages. However, previous convolutional neural networks (CNN)-based road extraction methods have had limited receptivity and failed to effectively capture long-distance road features. On the other hand, transformer-based methods have good global information-capturing capabilities, but face challenges in extracting road edge information. Additionally, existing excellent road extraction methods lack validation for the Chinese region. To address these issues, this paper proposes a novel road extraction model called the global–local information fusion network (GLNet). In this model, the global information extraction (GIE) module effectively integrates global contextual relationships, the local information extraction (LIE) module accurately captures road edge information, and the information fusion (IF) module combines the output features from both global and local branches to generate the final extraction results. Further, a series of experiments on two different Chinese road datasets with geographic robustness demonstrate that our model outperforms the state-of-the-art deep learning models for road extraction tasks in China. On the CHN6-CUG dataset, the overall accuracy (OA) and intersection over union (IoU) reach 97.49% and 63.27%, respectively, while on the RDCME dataset, OA and IoU reach 98.73% and 84.97%, respectively. These research results hold significant implications for road traffic, humanitarian rescue, and environmental monitoring, particularly in the context of the Chinese region. [ABSTRACT FROM AUTHOR]

The new type of multi-temporal global land use data with multiple classes is able to provide information on both the different land covers and their temporal changes; furthermore, it is able to contribute to many applications, such as those involving global climate and Earth ecosystem analyses. However, the current accuracy assessment methods have two limitations regarding multi-temporal land cover data that have multiple classes. First, multi-temporal land cover uses data from multiple phases, which is time-consuming and inefficient if evaluated one by one. Secondly, the conversion between different land cover classes increases the complexity of the sample stratification, and the assessments with different types of land cover suffer from inefficient sample stratification. In this paper, we propose a spatiotemporal stratified sampling method for stratifying the multi-temporal GlobeLand30 products for China. The changed and unchanged types of each class of data in the three periods are used to obtain a reasonable stratification. Then, the strata labels are simplified by using binary coding, i.e., a 1 or 0 representing a specified class or a nonspecified class, to improve the efficiency of the stratification. Additionally, the stratified sample size is determined by the combination of proportional allocation and empirical evaluation. The experimental results show that spatiotemporal stratified sampling is beneficial for increasing the sample size of the "change" strata for multi-temporal data and can evaluate not only the accuracy and area of the data in a single data but also the accuracy and area of the data in a multi-period change type and an unchanged type. This work also provides a good reference for the assessment of multi-temporal data with multiple classes. [ABSTRACT FROM AUTHOR]

The global navigation satellite system (GNSS) position time series provides essential data for geodynamic and geophysical studies. Interpolation of the GNSS position time series is necessary because missing data will produce inaccurate conclusions made from the studies. The spatio-temporal correlations between GNSS reference stations cannot be considered when using traditional interpolation methods. This paper examines the use of machine learning models to reflect the spatio-temporal correlation among GNSS reference stations. To form the machine learning problem, the time series to be interpolated are treated as output values, and the time series from the remaining GNSS reference stations are used as input data. Specifically, three machine learning algorithms (i.e., the gradient boosting decision tree (GBDT), eXtreme gradient boosting (XGBoost), and random forest (RF)) are utilized to perform interpolation with the time series data from five GNSS reference stations in North China. The results of the interpolation of discrete points indicate that the three machine learning models achieve similar interpolation precision in the Up component, which is 45% better than the traditional cubic spline interpolation precision. The results of the interpolation of continuous missing data indicate that seasonal oscillations caused by thermal expansion effects in summer significantly affect the interpolation precision. Meanwhile, we improved the interpolation precision of the three models by adding data from five stations which have high correlation with the initial five GNSS reference stations. The interpolated time series for the North, East, and Up (NEU) are examined by principal component analysis (PCA), and the results show that the GBDT and RF models perform interpolation better than the XGBoost model. [ABSTRACT FROM AUTHOR]

The Absorbing Aerosol Sensor (AAS) is carried on the Gao-Fen 5B (GF-5B) satellite, and it allows for the measurement of solar backscatter radiation by the atmosphere in the UV–Vis bands. The AAS is an imaging spectrometer that employs CCD for capturing both a continuous spectrum and the cross-track orientation with a 114° wide swath. The broad field of view provides daily global envelopment with a 4 km spatial resolution at the nadir. This paper mainly analyzes the initial working status of the instrument in orbit, including wavelength calibration, radiometric calibration, detector performance, and product availability. Preliminary observations indicate the ability of the AAS to monitor absorbing aerosols like dust, biomass burning, volcano ash, and some pollution aerosols and to identify the aerosol events in China and other regions with high spatial resolution. [ABSTRACT FROM AUTHOR]

Northeast China plays a pivotal role in producing commodity grains. The precipitation and temperature distribution during the growth season is impacted by geographical and climate factors, rendering the region vulnerable to drought. However, relying on a single index does not reflect the severity and extent of drought in different regions. This research utilised the random forest (RF) model for screening remote sensing indices. Relative soil moisture (RSM) was employed to compare seven commonly used indices: the temperature vegetation dryness index (TVDI), vegetation supply water index (VSWI), vegetation condition index (VCI), temperature condition index (TCI), vegetation health index (VHI), multi-band drought index (MBDI), and normalised difference drought index (NDDI). The effectiveness of these indices for monitoring drought during different developmental stages of spring maize was evaluated. Trend rates were employed to investigate the temporal changes in drought patterns of spring maize from 2003 to 2020, and the Sen + Mann–Kendall test was used to analyse spatial variations. The results showed the following: (1) The seven remote sensing indices could accurately track drought during critical growth stages with the TVDI demonstrating higher applicability than the other six indices. (2) The application periods of two TVDIs with different parameters differed for the drought monitoring of spring maize in different developmental periods. The consistency and accuracy of the normalised difference vegetation index (NDVI)-based TVDI (TVDIN) were 5.77% and 34.62% higher than those of the enhanced vegetation index (EVI)-based TVDI (TVDIE), respectively, in the early stage. In contrast, the TVDIE exhibited 13.46% higher consistency than the TVDIN in the middle stage, and the accuracy was the same. During the later stage, the TVDIE showed significantly higher consistency and accuracy than the TVDIN with consistency increases of 9.61% and 38.64%, respectively. (3) The drought trend in northeast China increased from 2003 to 2020, exhibiting severe spring drought and a weakening of the drought in summer. The southern, southwestern, and northwestern parts of northeast China showed an upward drought trend; the drought-affected areas accounted for 37.91% of the study area. This paper identified the most suitable remote sensing indices for monitoring drought in different developmental stages of spring maize. The results provide a comprehensive understanding of the spatial–temporal patterns of drought during the past 18 years. These findings can be used to develop a dynamic agricultural drought monitoring model to ensure food security. [ABSTRACT FROM AUTHOR]

In 2020, the BeiDou-3 global navigation satellite system (BDS-3) was officially completed and put into service. Currently, network real-time kinematic (RTK) technology is considered the main means through which to improve the positioning accuracy of the BeiDou navigation satellite system (BDS). This paper proposes a long-range undifferenced network RTK (URTK) algorithm, based on multi-frequency observation data of the BDS. First, the multi-frequency phase integer ambiguity resolution (AR) model considering atmospheric error parameters is designed, and the multi-frequency phase integer ambiguity of the long-range BDS reference station is determined. Then, the undifferenced integer ambiguity of each reference station is obtained, using linear variation based on the accurately determined phase integer ambiguity between reference stations, and the undifferenced observation error of each reference station is calculated. Considering the weakening spatial correlation of the observation errors between long-range stations, undifferenced classification error corrections of a reference station network are separated, according to different error characteristics. Finally, the inverse distance weighting method is employed to calculate the classification undifferenced error correction of the rover station. The rover station corrects the observation error through applying the undifferenced error correction to achieve high-precision positioning. The measured data of a long-range continuous operation reference station (CORS) network are selected for an experiment. The results show that the proposed algorithm can quickly and accurately realize the resolution of the BDS integer ambiguity of a reference station network and establish an undifferenced area error correction model in order to achieve accurate classification of undifferenced error correction values for a rover station. In China, the BDS-3 is superior to the global positioning system (GPS) in terms of the satellite number, position dilution of precision (PDOP) value, AR success rate, stability, and convergence time. The results show that the AR success rate, stability, and convergence time increase with the operational frequency, and the BDS-3 can achieve centimeter-level positioning of single-system rover stations without relying on the GPS. [ABSTRACT FROM AUTHOR]

Improving the carbon sequestration capacity (CSC) of an ecosystem by optimizing urban ecological networks is one of the effective ways to achieve the goal of "carbon neutrality" in the world. The contradiction between the irreplaceable ecological function and economic development of Yancheng City is prominent. Therefore, taking Yancheng City as an example, this paper adopted the morphological spatial pattern analysis–minimum cumulative resistance (MSPA-MCR) model to establish the ecological network of Yancheng City in 2020 and combined it with complex network theory to evaluate its ecological base, network quality, and CSC. The results show that the ecological network of Yancheng City has obvious characteristics of coastal cities. There is a significant positive correlation between CSC and the clustering efficiency of ecological sources, and improving the clustering efficiency of vegetation and water ecological nodes is conducive to enhancing the CSC of ecological networks. In terms of functional restoration of ecological networks, four types of 13 ecological stepping stones and 12 ecological corridors have been designed to strengthen the connectivity and balance of the network, and the improvement of network robustness before and after optimization verifies that the optimization scheme is reasonable and effective. This study improved the optimization method of ecological networks in Yancheng City based on enhancing the CSC of ecological nodes, which provided a theoretical framework and practical reference for the realization of global strategic goals of carbon neutrality. [ABSTRACT FROM AUTHOR]

The Qinghai–Tibet Plateau is the highest and largest permafrost area in the middle and low latitudes of China. In this region, permafrost thaw settlement is the main form of expressway subgrade disaster. Therefore, the quantitative analysis and regionalization study of permafrost thaw settlement deformation are of great significance for expressway construction and maintenance in the Qinghai–Tibet region. This paper establishes a thaw settlement prediction model using the thaw settlement coefficient and thaw depth. The thaw depth was predicted by the mean annual ground temperatures and active-layer thicknesses using the Radial Basis Function (RBF) neural network model, and the thaw settlement coefficient was determined according to the type of ice content. Further, the distribution characteristics of thaw settlement risk of the permafrost subgrade in the study region were mapped and analyzed. The results showed that the thaw settlement risk was able to be divided into four risk levels, namely significant risk, high risk, medium risk and low risk levels, with the areas of these four risk levels covering 3868.67 km2, 1594.21 km2, 2456.10 km2 and 558.78 km2, respectively, of the total study region. The significant risk level had the highest proportion among all the risk levels and was mainly distributed across the Chumar River Basin, Beiluhe River Basin and Gaerqu River Basin regions. Moreover, ice content was found to be the main factor affecting thaw settlement, with thaw settlement found to increase as the ice content increased. [ABSTRACT FROM AUTHOR]

External interference in ionospheric sounding seriously degrades the quality of echo signals and data; thus, it should be eliminated. This paper presents a method for suppressing interference using chaotic coding with a set of Bernoulli map sequences; compared with other commonly used coding methods such as Barker code, complementary code, and Barker-like codes, through simulation, the ambiguity function (AF) of Bernoulli map codes has better performance in terms of peak sidelobe level (PSL), integral sidelobe ratio (ISL), noise suppression (NS), and signal-to-noise ratio (SNR). Experimental tests were performed using a vertical ionosonde in Yinchuan, Ningxia Hui Autonomous Region, China, and the ionosonde was operated by alternating 40-bit Barker-like coding and 40-bit Bernoulli map coding each day to compare the effectiveness of interference suppression. The results showed that using Bernoulli map coding could remove interference and improve SNR significantly, thereby improving the data quality of the resulting ionograms. [ABSTRACT FROM AUTHOR]

Mountain areas in China account for 69% of the total land area; however, it is still an urgent that we grasp the special ecological structure of mountain areas and maximize the resource advantages of mountain areas under the principle of maintaining a certain ecological level. In this paper, Landsat 5, Landsat 8 and Sentinel-2A images were used as data sources to monitor and analyze land development and ecological change in Gui 'an in 2010, 2013, 2016, 2019 and 2021, so as to explore ecological maintenance mechanisms. Firstly, random forest classification based on multi-source remote sensing data was used to classify land, and the five phases of land-use change were assessed using quantitative analysis, in order to analyze the mountain region's land-use-change characteristics at different stages of development. The results show that Gui 'an has the "two-stage", rapid-development, rapid-recovery mode. Each stage includes a development-and-expansion period and a construction-and-protection period. In the construction period, ecological recovery construction will be emphasized, and the change intensity and rate of the second stage are lower than that of the first stage. Secondly, using a remote sensing ecological index, vegetation coverage, and a landscape index, an ecological evaluation model of the study area was constructed to analyze changes in the ecological environment and its protection in the process of land development. The ecological maintenance status of the five stages was quantitatively monitored using the analysis methods of difference change and coefficient of variation. The results showed that in the first stage of land development and expansion, the landscape pattern and ecological quality fluctuated greatly, and the proportion of ecological quality of an excellent grade decreased by 28.46%. However, in the second stage, the change slowed down and remained unchanged, and gradually moved to the middle and upper level. The results show that there is a close relationship between ecological maintenance and the land development mode, and new mountain towns can maintain ecological quality and achieve sustainable development through a reasonable land development mode. At the end of this paper, the factors affecting the ecological maintenance capacity of Gui 'an are discussed, providing effective reference material and development models for the development of mountainous areas. [ABSTRACT FROM AUTHOR]

Models for bathymetry retrieval from multispectral images have not considered the errors caused by tidal fluctuation. A rigorous bathymetric model that considers the variation in tide height time series, including the tide height calculation and instantaneous tide height correction at the epoch of satellite flight into the bathymetric retrieval model, is proposed in this paper. The model was applied on Weizhou Island, located in Guangxi Province, China, and its accuracy verificated with four check lines and seven checkpoints. A scene from the Landsat 8 satellite image was used as experimental data. The reference ("true") water depth data collected by a RESON SeaBat 7125 multibeam instrument was used for comparison analysis. When satellite-derived bathymetry is compared, it is found that maximum absolute error, mean absolute error, and RMSE have decreased 54, 45, and 30% relative to that of the traditional model in the entire test field. The accuracy of the water depths retrieved by our model increased 30 and 56% when validated using four check lines and seven checkpoints, respectively. Therefore, it can be concluded that the model proposed in this paper can effectively improve the accuracy of bathymetry retrieved from Landsat 8 images. [ABSTRACT FROM AUTHOR]

On 23 November 2021, the Gaofen-3-02 (GF3-02) satellite was successfully launched in the Jiuquan Satellite Launch Center of China. The primary payload is C-band Synthetic Aperture Radar (SAR), with a maximum resolution of 1 m, and includes 12 imaging modes such as Spotlight, Strip, and TOPSAR, which will play an essential role in marine environment monitoring. As an important marine environmental parameter, the wind speed accuracy retrieved by GF3-02 SAR directly reflects its performance and effectiveness as an operational product. Therefore, based on the wind data of buoys of the National Data Buoy Center (NDBC), ECMWF reanalysis V5 (ERA5), and HY-2B Scatterometer (SCA), a preliminary accuracy assessment of the wind speed retrieved by GF3-02 SAR is carried out in this paper. The wind speed retrieval accuracy of GF3-02 SAR in the co-polarization (HH+VV) data under different Geophysical Model Functions (GMFs) is discussed by using 478 level-1A Single Look Complex (SLC) ocean products acquired in Quad-Polarization Strip I (QPSI) and produced by the National Satellite Ocean Application Service (NSOAS) from January to March 2022. The results show that the optimal root mean square errors (RMSE) are 1.40 m/s, 1.18 m/s, and 1.24 m/s for the VV polarization and 1.39 m/s, 1.19 m/s, and 1.52 m/s for the HH polarization compared to the NDBC wind speed, the ERA5 wind speed, and the HY-2B SCA wind speed, respectively. The preliminary results show that GF3-02 SAR has good wind speed retrieval ability and can meet the needs of operational products. [ABSTRACT FROM AUTHOR]

Gross floor area is defined as the product of number of building stories and its base area. Gross floor area acquisition is the core problem to estimate floor area ratio, which is an important indicator for many geographical analyses. High data acquisition cost or inherent defect of methods for existing gross floor area acquisition methods limit their applications in a wide range. In this paper we proposed three instance-wise gross floor area estimation methods in various degrees of end-to-end learning from monocular optical images based on the NoS R-CNN, which is a deep convolutional neural network to estimate the number of building stories. To the best of our knowledge, this is the first attempt to estimate instance-wise gross floor area from monocular optical satellite images. For comparing the performance of the proposed three methods, experiments on our dataset from nine cities in China were carried out, and the results were analyzed in detail in order to explore the reasons for the performance gap between the different methods. The results show that there is an inverse relationship between the model performance and the degree of end-to-end learning for base area estimation task and gross floor area estimation task. The quantitative and qualitative evaluations of the proposed methods indicate that the performances of proposed methods for accurate GFA estimation are promising for potential applications using large-scale remote sensing images. The proposed methods provide a new perspective for gross floor area/floor area ratio estimation and downstream tasks such as population estimation, living conditions assessment, etc. [ABSTRACT FROM AUTHOR]

The world's largest macroalgae bloom (also known as green tide) has been reported since the 29th Olympic Games in 2008, which is verified as the fast reproduction of floating green macroalgae (Ulva prolifera). It is helpful to assess the biomass of macroalgae for the government of marine environment protection. In this study, the synchronization cruise experiment was firstly introduced, which aimed to investigate the biomass evaluation of Ulva prolifera in the Yellow Sea of China. The Floating Algae Index by Polarimetric SAR image (FAIPS) was then proposed. Finally, the floating algae biomass evaluation model was demonstrated and verified, which showed an exponential relationship between FAIPS and wet biomass per area (kg/m2) of macroalgae. The model proposed in this paper can be used in the biomass assessment of floating algae in the presence of polarimetric SAR images, regardless of daylight and cloud coverage over the sea surface. [ABSTRACT FROM AUTHOR]

In this paper, we forecasted the ionospheric total electron content (TEC) over the region of China using the bidirectional convolutional gated recurrent unit (BiConvGRU) model. We first generated the China Regional Ionospheric Maps (CRIMs) using GNSS observations provide by the Crustal Movement Observation Network of China (CMONOC). We then used gridded TEC maps from 2015 to 2018 with a 1 h interval from the CRIMs as the dataset, including quiet periods and storm periods of ionospheric TEC. The BiConvGRU model was then utilized to forecast the ionospheric TEC across China for the year 2018. The forecasted TEC was compared with the TEC from the International Reference Ionosphere (IRI-2016), Convolutional Long Short-Term Memory (ConvLSTM), Convolutional Gated Recurrent Unit (ConvGRU), Bidirectional Convolutional Long Short-Term Memory (BiConvLSTM), and the 1-day Predicted Global Ionospheric Map (C1PG) provided by the Center for Orbit Determination in Europe (CODE). In addition, indices including Kp, ap, Dst and F10.7 were added to the training dataset to improve the forecasting accuracy of the model (-A indicates no indices, while -B indicates with indices). The results verified that the prediction accuracies of the models integrated with these indices were significantly improved, especially during geomagnetic storms. The BiConvGRU-B model presented a decrease of 41.5%, 22.3%, and 13.2% in the root mean square error (RMSE) compared to the IRI-2016, ConvGRU, and BiConvLSTM-B models during geomagnetic storm days. Furthermore, at a specific grid point, the BiConvGRU-B model showed a decrease of 42.6%, 49.1%, and 31.9% in RMSE during geomagnetic quiet days and 30.6%, 34.1%, and 15.1% during geomagnetic storm days compared to the IRI-2016, C1PG, and BiConvLSTM-B models, respectively. In the cumulative percentage analysis, the BiConvGRU-B model had a significantly higher percentage of mean absolute error (MAE) within the range of 0–1 TECU in all seasons compared to the BiConvLSTM-B model. Meanwhile, the BiConvGRU-B model outperformed the BiConvLSTM-B model with lower RMSE for each month of 2018. [ABSTRACT FROM AUTHOR]

Space-based measurements, such as the Greenhouse gases Observing SATellite (GOSAT) and the TROPOspheric Monitoring Instrument (TROPOMI) aboard the Sentinel-5 Precursor satellite, provide global observations of the column-averaged CH4 concentration (XCH4). Due to the irregular observations and data gaps in the retrievals, studies on the spatial and temporal variations of regional atmospheric CH4 concentrations are limited. In this paper, we mapped XCH4 data over monsoon Asia using GOSAT and TROPOMI observations from April 2009 to December 2021 and analyzed the spatial and temporal pattern of atmospheric CH4 variations and emissions. The results show that atmospheric CH4 concentrations over monsoon Asia have long-term increases with an annual growth rate of roughly 8.4 ppb. The spatial and temporal trends of XCH4 data are significantly correlated with anthropogenic CH4 emissions from the bottom-up emission inventory of EDGAR. The spatial pattern of gridded XCH4 temporal variations in China presents a basically consistent distribution with the Heihe–Tengchong Line, which is mainly related to the difference in anthropogenic emissions in the eastern and western areas. Using the mapping of XCH4 data from 2019 to 2021, this study further revealed the response of atmospheric CH4 concentrations to anthropogenic emissions in different urban agglomerations. For the urban agglomerations, the triangle of Central China (TCC), the Chengdu–Chongqing City Group (CCG), and the Yangtze River Delta (YRD) show higher CH4 concentrations and emissions than the Beijing–Tianjin–Hebei region and nearby areas (BTH). The results reveal the spatial and temporal distribution of CH4 concentrations and quantify the differences between urban agglomerations, which will support further studies on the drivers of methane emissions. [ABSTRACT FROM AUTHOR]

Land motions are significantly widespread in the Yellow River delta (YRD). There is, however, a lack of understanding of the delta-wide comprehensive deformation mode and its dynamic mechanism, especially triggered by groundwater extraction. This paper adopts an integrated analysis of multidisciplinary data of image geodesy, geophysics, geology and hydrogeology to provide insights into Earth surface displacement patterns and dynamics in the YRD. Delta-scale land motions were measured for the first time using L-band ALOS images processed using multi-temporal InSAR, illustrating multiple obvious surface sinking regions and a maximum annual subsidence velocity of up to 130 mm. Then, the InSAR-constrained distributed point source model with optimal kernel parameters, a smoothness factor of 10 and a model grid size of 300 m was established and confirmed to be rational, reliable and accurate for modeling analysis over the YRD. Remarkable horizontal surface displacements, moving towards and converging on a sinking center, were recovered by means of modeling and measured using InSAR, with a maximum rate of up to 60 mm per year, which can trigger significant disasters, such as ground fissures and building damage. In addition, the annual total water storage variation at the delta scale, the most meaningful outcome, can be calculated and reaches a total of approximately 12,010 × 103 m3 in Guangrao city, efficiently filling the gap of GRACE and in situ investigations for delta-wide aquifer monitoring. Finally, a comparative analysis of time series InSAR measurements, modeling outcomes, and fault and groundwater data was conducted, and the strong agreement demonstrates that faults control aquifer distribution and hence the spatial distribution of groundwater-withdrawal-related regional land subsidence. Moreover, the obvious asymmetric displacements, demonstrating a northeasterly displacement trend, further reveal that faults control aquifer distribution and Earth surface deformation. These findings are useful for understanding the land motion patterns and dynamics, helping to sustainably manage groundwater and control disasters in the YRD and elsewhere worldwide. [ABSTRACT FROM AUTHOR]

Landslides are a major concern in the mountainous regions of southwest China, leading to significant loss of life and property damage. Therefore, it is crucial to identify potential landslides for early warning and mitigation. stacking-InSAR, a technique used for landslide identification in a wide area, has been found to be faster than conventional time-series InSAR. However, the dense vegetation in southwest China mountains has an adverse impact on the coherence of stacking-InSAR, resulting in more noise and inaccuracies in landslide identification. To address this problem, this paper proposes an improved seasonal interferometry stacking-InSAR method. It uses Sentinel-1 satellite data from 2017 to 2022. The study area is the river valley section of the G213 road from Wenchuan County to Mao County. The study reveals the characteristics of seasonal decoherence in the steep mountainous region, and identifies a total of 21 potential landslides using the improved method. Additionally, optical satellite imagery and LiDAR data were used to assist in the identification of potential landslides. The results of the conventional stacking-InSAR method and the improved seasonal interferometry stacking-InSAR method are compared, showing that the latter is more effective in noise suppression caused by low coherence. Their standard deviations were reduced by 46%, 22%, 10%, and 14%, respectively, using the quantitative statistics for the four tested areas. The proposed method provides an efficient and effective approach for detecting potential landslides in the mountainous regions of southwest China. It can serve as a valuable technical reference for future landslide identification studies in this area. [ABSTRACT FROM AUTHOR]

Geomorphic parameters, which reflect the migration of drainage divide responses, are widely used to assess tectonic activity. There have been several large earthquakes in the history of the Hetao Basin, within which the Sertengshan Piedmont Fault is important. This study highlights certain references for regional seismic risk assessment. Few studies have been conducted on the Sertengshan area from the perspective of geomorphic parameters. In this paper, ksn, HI, and Vf were obtained to indicate the tectonic activity in the Sertengshan area, and χ and Gilbert metrics were extracted to explore the state of the drainage basin. The results show that the tectonic activity varies spatially and is strong in the western part of the southern Sertengshan region and the northern part corresponding to the turning point of the fault. Most of the Sertengshan area is in the prime and old stages of geomorphological evolution, whereas some areas are in the juvenile stage. The old stage was mainly concentrated in the northern region, and the southern part was younger than the northern region. Overall, the Sertengshan area is tectonically active and affected by the activity of the Sertengshan Piedmont Fault. The western part of the divide migrated northwest, while the central and eastern parts tended to move southward. We suggest that the divide migration is influenced by tectonic activity and tends to move towards the direction of lower tectonic activity. [ABSTRACT FROM AUTHOR]

To improve the accuracy and reliability of precipitation estimation, numerous models based on machine learning technology have been developed for integrating data from multiple sources. However, little attention has been paid to extracting the spatiotemporal correlation patterns between satellite products and rain gauge observations during the merging process. This paper focuses on this issue by proposing an integrated framework to generate an accurate and reliable spatiotemporal estimation of precipitation. The proposed framework integrates Funk-Singular Value Decomposition (F-SVD) in the recommender system to achieve the accurate spatial distribution of precipitation based on the spatiotemporal interpolation of rain gauge observations and Convolutional Long Short-Term Memory (ConvLSTM) to merge precipitation data from interpolation results and satellite observation through exploiting the spatiotemporal correlation pattern between them. The framework (FS-ConvLSTM) is utilized to obtain hourly precipitation merging data with a resolution of 0.1° in Jianxi Basin, southeast of China, from both rain gauge data and Global Precipitation Measurement (GPM) from 2006 to 2018. The LSTM and Inverse Distance Weighting (IDW) are constructed for comparison purposes. The results demonstrate that the framework could not only provide more accurate precipitation distribution but also achieve better stability and reliability. Compared with other models, it performs better in variation process description and rainfall capture capability, and the root mean square error (RSME) and probability of detection (POD) are improved by 63.6% and 22.9% from the original GPM, respectively. In addition, the merged precipitation combines the strength of different data while mitigating their weaknesses and has good agreement with observed precipitation in terms of magnitude and spatial distribution. Consequently, the proposed framework provides a valuable tool to improve the accuracy of precipitation estimation, which can have important implications for water resource management and natural disaster preparedness. [ABSTRACT FROM AUTHOR]

The Local Climate Zone (LCZ) classification scheme is a vital method of building a category dataset for high-resolution urban land. For the development of urban meteorology, air pollution and related disciplines, the high-resolution classification data of urban buildings are very important. This study aims to create LCZ datasets with detailed architectural characteristics for major cities and urban agglomerations in China, and obtain more accurate results. We constructed 120 m resolution land use datasets for 63 cities (mainly provincial capitals, municipalities directly under the Central Government, important prefecture-level cities and special administrative regions) and 4 urban agglomerations in China based on the local climate zone (LCZ) classification scheme using the World Urban Database and Access Portal Tools method (WUDAPT). Nearly 100,000 samples were used, of which 76,000 training samples were used to provide spectral signatures and 23,000 validation samples were used to ensure accuracy assessments. Compared with similar studies, the LCZ datasets in this paper were generally of good quality, with an overall accuracy of 71–93% (mean 82%), an accuracy for built classifications of 57–83% (mean 72%), and an accuracy for natural classifications of 70–99% (mean 90%). In addition, 35% of 63 Chinese cities have construction areas of more than 5%, and the plateaus northwest of Chengdu and Chongqing are covered with snow all year round. Therefore, based on the original LCZ classification system, the construction area (LZC H) and the snow cover (LCZ I) were newly added as the basic classifications of urban LCZ classification in China. Detailed architectural features of cities and urban agglomerations in China are provided by the LCZ datasets in this study. It can be applied to fine numerical models of the meteorological and atmospheric environment and improve the prediction accuracy. [ABSTRACT FROM AUTHOR]

The International Association of Geodesy (IAG) aims to establish the International Height Reference System (IHRS) as one of its primary scientific objectives. Central to the realization of the IHRS is global vertical datum unification, which requires the connection of existing local vertical height reference systems (VHS) robustly and consistently. However, conventional methods are not suitable for estimating the offsets between two distant local height systems. In this paper, we propose a framework for connecting two local VHSs using ultraprecise clock frequency signal links between satellites and ground stations, referred to as the satellite frequency signal transmission (SFST) approach. The SFST approach allows for the direct determination of the geopotential and height differences between two ground datum stations without any location restrictions between the two VHSs. The simulation results show that the VHSs of China and the US can be unified with an accuracy of several centimeters, provided that the stability of atomic clocks used on-board the satellite and at on-ground datum locations reaches 4.8 × 10 − 17 τ − 1 / 2 for an averaging time τ (in seconds). We conclude that the SFST approach shows promise for achieving centimeter-level accuracy in unifying the global vertical height datum and represents a new paradigm for the realization of the IHRS. [ABSTRACT FROM AUTHOR]

Using the Gravity Recovery and Climate Experiment (GRACE) satellite to monitor groundwater storage (GWS) anomalies (GWSAs) at the local scale is difficult due to the low spatial resolution of GRACE. Many attempts have been made to downscale GRACE-based GWSAs to a finer resolution using statistical downscaling approaches. However, the time-lag effect of GWSAs relative to environmental variables and optimal model parameters is always ignored, making it challenging to achieve good spatial downscaling, especially for arid regions with longer groundwater infiltration paths. In this paper, we present a novel spatial downscaling method for constructing GRACE-based 1 km-resolution GWSAs by using the back propagation neural network (BPNN) and considering the time-lag effect and the number of hidden neurons in the model. The method was validated in Alxa League, China. The results show that a good simulation performance was achieved by adopting varying lag times (from 0 to 4 months) for the environmental variables and 14 hidden neurons for all the networks, with a mean correlation coefficient (CC) of 0.81 and a mean root-mean-square error (RMSE) of 0.70 cm for each month from April 2002 to December 2020. The downscaled GWSAs were highly consistent with the original data in terms of long-term temporal variations (the decline rate of the GWSAs was about −0.40 ± 0.01 cm/year) and spatial distribution. This study provides a feasible approach for downscaling GRACE data to 1 km resolution in arid regions, thereby assisting with the sustainable management and conservation of groundwater resources at different scales. [ABSTRACT FROM AUTHOR]