Search

Made available in DSpace on 2018-11-29T09:28:12Z (GMT). No. of bitstreams: 0 Previous issue date: 2018-03-14 Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) Swarm-founding wasps are endemic and common representatives of neotropical fauna and compose an interesting social tribe of vespids, presenting both complex social characteristics and uncommon traits for a eusocial group, such as the absence of castes with distinct morphology. The paper wasp Protonectarina sylveirae (Saussure) presents a broad distribution from Brazil, Argentina and Paraguay, occurring widespread in the Atlantic rainforest and arboreal Caatinga, being absent in the Amazon region. Given the peculiar distribution among swarm-founding wasps, an integrative approach to reconstruct the evolutionary history of P. sylveirae in a spatial-temporal framework was performed to investigate: the presence of genetic structure and its relationship with the geography, the evolution of distinct morphologic lineages and the possible historical event(s) in Neotropical region, which could explain the observed phylogeographic pattern. Individuals of P. sylveirae were obtained from populations of 16 areas throughout its distribution for DNA extraction and amplification of mitochondrial genes 12S, 16S and COI. Analysis of genetic diversity, construction of haplotype net, analysis of population structure and dating analysis of divergence time were performed. A morphometric analysis was also performed using 8 measures of the body of the adult (workers) to test if there are morphological distinction among populations. Thirty-five haplotypes were identified, most of them exclusively of a group and a high population structure was found. The possibility of genetic divergence because of isolation by distance was rejected. Morphological analysis pointed to a great uniformity in phenotypes, with only a small degree of differentiation between populations of south and the remaining. Divergence time analysis showed a Middle/Late Miocene origin, a period where an extensive marine ingression occurred in South America. Divergence of haplogroups began from the Plio/Pleistocene boundary and the last glacial maximum most likely modeled the current distribution of species, even though it was not the cause of genetic breaks. Univ Estadual Paulista, Inst Biociencias Letras & Ciencias Exatas, Dept Zool & Bot, Sao Paulo, Brazil Univ Estadual Paulista, Fac Ciencias Agr & Vet, Dept Biol Aplicada Agr, Sao Paulo, Brazil Univ Estadual Paulista, Inst Biociencias Letras & Ciencias Exatas, Dept Zool & Bot, Sao Paulo, Brazil Univ Estadual Paulista, Fac Ciencias Agr & Vet, Dept Biol Aplicada Agr, Sao Paulo, Brazil CNPq: CNPq - 472403/2013-3 FAPESP: 2012/13886-4

In accordance with the opinion of the World Health Organization and the World Water Council the development of effective technologies for the treatment of wastewater from heavy metals for their discharge into water bodies or reuse is an urgent task nowadays. Phytoremediation biotechnologies is the most environmentally friendly and cheapest way of the treatment of wastewater, suitable for sustainable development principals. The main disadvantage of the phytoremediation is the slow speed of the process. A method for accelerating the process of phytoremediation by the combined effect of magnetic and weak electric fields is proposed. The purpose of this study is to determine the values of the parameters of the magnetic and weak electric fields that are most suitable for extracting cuprum ions from wastewater using the higher aqua plants (Lemna minor). A corresponding technological process based on the results of the study is proposed. The results have shown that the removal of copper cations from sulfate solutions effectively occurs in the initial period of time (1–5 hours) under the influence of a magnetic field with an intensity of H = 2 kA/m. Under the combined influence of an electrical current with density j = 240 μA/cm2 and a magnetic field (H = 2 kA/m) the highest rate of copper extraction by duckweed leaves is achieved. Under these conditions, the greatest growth and development of plant leaves occurs. The paper presents the results of determining of the parameters of the electrochemical release from the eluate of the spent phytomass of duckweed. It has been determined that the release of metal occurs at E = 0.32 V. An original scheme for wastewater treatment from copper with subsequent separation of copper from the spent phytomass of duckweed is proposed. In general, the presented results are a scientific justification of wastewater treatment technologies and a contribution to resolving the crisis in the field of fresh water supply. An important contribution in the circular economy is a technology recommendation proposed for recovering copper from duckweed after wastewater treatment.

This study, based in San Bernardino County, Southern California, collected and examined tap water samples within the area to explore the feasibility of adopting non-industrial equipment and methods to reduce water hardness and total dissolved solids(TDS). We investigated how water quality could be improved by utilizing water boiling, activated carbon and sodium bicarbonate additives, as well as electrolysis methods. The results show that heating is effective at lower temperatures rather than long boils, as none of the boiling tests were lower than the original value. Activated carbon is unable to lower TDS, because it is unable to bind to any impurities present in the water. This resulted in an overall TDS increase of 3.5%. However, adding small amounts of sodium bicarbonate(NaHCO3) will further eliminate water hardness by reacting with magnesium ions and improve taste, while increasing the pH. When added to room temperature tap water, there is a continuous increase in TDS of 24.8% at the 30 mg/L mark. The new findings presented in this study showed that electrolysis was the most successful method in eliminating TDS, showing an inverse proportion where an increasing electrical current and duration of electrical lowers more amounts of solids. This method created a maximum decrease in TDS by a maximum of 22.7%, with 3 tests resulting in 15.3–16.6% decreases. Furthermore, when water is heated to a temperature around 50°C (122°F), a decrease in TDS of around 16% was also shown. The reduction of these solids will help lower water hardness and improve the taste of tap water. These results will help direct residents to drink more tap water rather than bottled water with similar taste and health benefits for a cheaper price as well as a reduction on plastic usage.

Synthetic fibers are increasingly seen to dominate microplastic pollution profiles in aquatic environments, with evidence pointing to textiles as a potentially important source. However, the loss of microfibers from textiles during laundry is poorly understood. We evaluated microfiber release from a variety of synthetic and natural consumer apparel textile samples (n = 37), with different material types, constructions, and treatments during five consecutive domestic laundry cycles. Microfiber loss ranged from 9.6 mg to 1,240 mg kg-1 of textile per wash, or an estimated 8,809 to > 6,877,000 microfibers. Mechanically-treated polyester samples, dominated by fleeces and jerseys, released six times more microfibers (161 ± 173 mg kg-1 per wash) than did nylon samples with woven construction and filamentous yarns (27 ± 14 mg kg-1 per wash). Fiber shedding was positively correlated with fabric thickness for nylon and polyester. Interestingly, cotton and wool textiles also shed large amounts of microfibers (165 ± 44 mg kg-1 per wash). The similarity between the average width of textile fibers here (12.4 ± 4.5 μm) and those found in ocean samples provides support for the notion that home laundry is an important source of microfiber pollution. Evaluation of two marketed laundry lint traps provided insight into intervention options for the home, with retention of up to 90% for polyester fibers and 46% for nylon fibers. Our observation of a > 850-fold difference in the number of microfibers lost between low and high shedding textiles illustrates the strong potential for intervention, including more sustainable clothing design.

The massive growth of potentially toxic cyanobacteria in water supply reservoirs, such as Legedadi Reservoir (Ethiopia), poses a huge burden to water purification units and represents a serious threat to public health. In this study, we evaluated the efficiency of the flocculants/coagulants chitosan, Moringa oleifera seed (MOS), and poly-aluminium chloride (PAC) in settling cyanobacterial species present in the Legedadi Reservoir. We also tested whether coagulant-treated reservoir water promotes cyanobacteria growth. Our data showed that suspended solids in the turbid reservoir acted as ballast, thereby enhancing settling and hence the removal of cyanobacterial species coagulated with chitosan, Moringa oleifera seed, or their combination. Compared to other coagulants, MOS of 30 mg/L concentration, with the removal efficiency of 93.6%, was the most effective in removing cyanobacterial species without causing cell lysis. Contrary to our expectation, PAC was the least effective coagulant. Moreover, reservoir water treated with MOS alone or MOS combined with chitosan did not support any growth of cyanobacteria during the first two weeks of the experiment. Our data indicate that the efficacy of a flocculant/coagulant in the removal of cyanobacteria is influenced by the uniqueness of individual lakes/reservoirs, implying that mitigation methods should consider the unique characteristic of the lake/reservoir.

Among the challenges of sustainable management of meat production, the key issue is to improve the energy efficiency of production processes, which will consequently affect the reduction of greenhouse gas emissions. Such effects are achieved by combining various chilling systems with electrical stimulation that determines the quality of meat at the slaughter stage. The novelties of the research undertaken included determining the impact of various variants of meat production (chilling method: slow, fast, accelerated + HVES/NES) on changes in the basic (industrial) quality indicators (pH and temperature) of beef produced from Polish Holstein-Friesian breed cattle, and then indicating the optimal variant for energy-efficient (sustainable) beef production. The HVES and the fast chilling method yielded positive economic (meat weight loss), technological (high quality, hot-boning), energetic (lower electricity consumption), and organizational effects (reduced chilling and storage surfaces and expenditures for staff wages) compared to the slow and accelerated methods. Reaching the desired final temperature with an increased amount of chilled meat enables obtaining a few-fold decrease in the specific energy consumption and a higher energy efficiency of the process. This allows recommending the above actions to be undertaken by entrepreneurs in the pursuit of sustainable meat production.

Determining the distribution of the Yangtze finless porpoise (Neophocaena asiaeorientalis asiaeorientalis, YFP) in the Yangtze River has to date relied on traditional visual and counting methods, but such field surveys are time-consuming and expensive. Analyses using environmental DNA (eDNA) to investigate the presence and range of endangered aquatic species have proven to be more economical and effective detection methods, and are a non-invasive approach to sampling. A challenge of relying on eDNA for YFP monitoring is that the Yangtze River is characterized by high turbidity and a strong current. Here, we used an eDNA-based approach to estimate the presence of YFP at 18 sites in the Yangtze River in August 2017 and at an additional 11 sites in January 2018. At each sampling site, we filtered six 1 L water samples with 5 µm pore size filter paper and quantified the amount of YFP eDNA in each water sample using quantitative real-time polymerase chain reaction (qPCR). In addition, YFP eDNA was successfully detected in locations where we visually observed YFP, as well as in locations where YFP were not observed directly. We found that our eDNA-based method had higher detection rates than traditional field survey methods. Although YFP was visually observed in the Yangtze River in winter, water samples collected during the summer contained significantly higher YFP eDNA than winter water samples. Our results demonstrate the potential effectiveness of eDNA detection methods in determining the distribution of YFP in the Yangtze River.

Faecal Sludge Management (FSM) has become a prominent environmental concern in the today’s world. Dewatering of sludge and the treatment of wastewater (WW) are the prime spiny issue because of the deleterious essence of faecal sludge (FS) and WW in the environment. The main focus of this study was on FSM by ‘Deebag’ and ‘Jute Bag’ through dewatering and filtering. Deebag is a dewatering as well as filtering media which is made with geotextile and polypropylene. Contrariwise, three types of jute bags were made of jute fiber for using as the same purposes of Deebag. A polyacrylamide polymer was used in this study and both filtering and dewatering were done in two ways—with and without the presence of polymer. Biochemical Oxygen Demand at 5 days (BOD5), Chemical Oxygen Demand (COD), pH, Electrical Conductivity (EC), Chloride (Cl-), Phosphate (PO43-), Nitrate (NO3-), Total Suspended Solid (TSS) and Total Dissolved Solid (TDS) parameters of raw and filtering samples were analyzed to assess the performance of WW treatment by Deebag and jute bags. Only using polymer was observed as one kind of treatment of WW. Deebag has been found to show the maximum dewatering capacity as well as treatment efficiency comparing with the jute bags. However, among three types of jute bags, double jute layered bag has shown the best performance. Maximum dewatering for Deebag and jute bags were found 88% and 83% respectively while using the polymer.

The application of photocatalyst in pavements has received comprehensive attention in recent years due to its ability to decontaminate nitrogen oxides (NOx). However, it's remarkable that NOx also accumulated extensively in parking lots. The purpose of this study is to develop a movable photocatalytic plate (remarked photocatalytic KT plates) coupled with high activity to purify NOx. Firstly, the type of photocatalytic KT plates was determined according to NO removal experiment in laboratory. Then the plates were employed in the parking lots for removing NOx. One sample T-test, normality test and paired sample T-test methods for NOx concentration variation were conducted to determine the appropriate comparative means of dates under both dark and illuminated conditions. The difference of NOX concentration between dark and illuminated conditions was obtained to evaluate the photocatalytic removal efficiency. The results indicated that NO removal efficiency in laboratory and parking lots were 51.31% and 9.2%, respectively.

Fundamental ecological principles of ecosystem-level respiration are extensively applied in greenhouse gas and elemental cycle studies. A laboratory system termed CEMS (Carbon Dioxide Evolution Measurement System), developed to explore microbial biofilm growth and metabolic responses, was evaluated as an early-warning system for microbial disturbances in industrial settings: in (a) potable water system contamination, and (b) bioreactor inhibition. Respiration was detected as CO2 production, rather than O2 consumption, including aerobic and anaerobic metabolism. Design, thresholds, and benefits of the remote CO2 monitoring technology were described. Headspace CO2 correlated with contamination levels, as well as chemical (R2 > 0.83–0.96) and microbiological water quality indicators (R2 > 0.78–0.88). Detection thresholds were limiting factors in monitoring drinking water to national and international standards (0 CFU/100 mL fecal coliforms) in both open- (>1500 CFU/mL) and closed-loop CO2 measuring regimes (>100 CFU/100 mL). However, closed-loop detection thresholds allow for the detection of significant contamination events, and monitoring less stringent systems such as irrigation water (2 fluctuations from chemical CO2 dynamics, to optimize this real-time, sustainable, low-waste technology, facilitating timeous responses to biological disturbances in bioreactors.

Due to the inefficient reproduction of microorganisms in oxygen-deprived environments of the reservoir, the applications of microbial enhanced oil recovery (MEOR) are restricted. To overcome this problem, a new type of air-assisted MEOR process was investigated. Three compounding oil degradation strains were screened using biochemical experiments. Their performances in bacterial suspensions with different amounts of dissolved oxygen were evaluated. Water flooding, microbial flooding and air-assisted microbial flooding core flow experiments were carried out. Carbon distribution curve of biodegraded oil with different oxygen concentration was determined by chromatographic analysis. The long-chain alkanes are degraded by microorganisms. A simulation model was established to take into account the change in oxygen concentration in the reservoir. The results showed that the optimal dissolved oxygen concentration for microbial growth was 4.5~5.5mg/L. The main oxygen consumption in the reservoir happened in the stationary and declining phases of the microbial growth systems. In order to reduce the oxygen concentration to a safe level, the minimum radius of oxygen consumption was found to be about 145m. These results demonstrate that the air-assisted MEOR process can overcome the shortcomings of traditional microbial flooding techniques. The findings of this study can help for better understanding of microbial enhanced oil recovery and improving the efficiency of microbial oil displacement.

In response to the recent development of ear corn feeding systems and the shortage of bulking agents for manure composting in the Hokkaido region, the plausibility of using corn stover (a residue of ear corn harvesting) as an alternative bulking agent for dairy manure composting was tested. The temperature profile, quality of the final product, and greenhouse gas emissions were evaluated and compared with the values obtained from manure that used wheat straw, a typical bulking agent. A sufficiently high temperature profile (>70°C) and active organic matter degradation were achieved by mixing in corn stover. After active organic matter degradation for 8 weeks, CO2 production was significantly lower and the stable final products were obtained. The total solids level increased significantly, to 48.8–50.4%, while the C/N ratio dropped significantly, from 19.9–21.8 to 11.2–12.8. Methane emission from the corn-stover-based pile was 0.36% of initial volatile solids, while nitrous oxide emission was 0.58% of initial N, proving that the use of corn stover can mitigate greenhouse gas emission and that its mitigating effect was comparable to those of other bulking agents. Together, the results showed that the use of corn stover can be a suitable alternative bulking agent for dairy manure composting and can serve as part of an ecologically friendly and “circular” method of dairy farming.

The pre-aerobic process of coking wastewater treatment has strong capacity of decarbonization and detoxification, which contribute to the subsequent dinitrogen of non-carbon source/heterotrophic denitrification. The COD removal rate can reach > 90% in the first aerobic bioreactor of the novel O/H/O coking wastewater treatment system during long-term operation. The physico-chemical characteristics of influent and effluent coking wastewater in the first aerobic bioreactor were analyzed to examine how they correlated with bacterial communities. The diversity of the activated sludge microbial community was investigated using a culture-independent molecular approach. The microbial community functional profiling and detailed pathways were predicted from the 16S rRNA gene-sequencing data by the PICRUSt software and the KEGG database. High-throughput MiSeq sequencing results revealed a distinct microbial composition in the activated sludge of the first aerobic bioreactor of the O/H/O system. Proteobacteria, Bacteroidetes, and Chlorobi were the decarbonization and detoxification dominant phyla with the relative abundance of 84.07 ± 5.45, 10.89 ± 6.31, and 2.96 ± 1.12%, respectively. Thiobacillus, Rhodoplanes, Lysobacter, and Leucobacter were the potential major genera involved in the crucial functional pathways related to the degradation of phenols, cyanide, benzoate, and naphthalene. These results indicated that the comprehensive understanding of the structure and function diversity of the microbial community in the bioreactor will be conducive to the optimal coking wastewater treatment.

Scientific and reasonable treatment of dredged silt can not only protect the ecological environment but also play an essential role in the utilization of silt resources. Due to high water content, low permeability and high organic matter content of the silt, a large amount of bacteria and harmful gases are often produced during the process of silt sedimentation. Thermal drying has been taken as a technically attractive method for harmless treatment of contaminated dredged silt. In this study, ultrasound technology is introduced to shorten the time needed for silt drying. A preliminary laboratory study is carried out to assess the effectiveness of ultrasound on thermal drying. A series of thermal drying tests, with and without ultrasound, were conducted on kaolin soil specimens that were prepared by settling and self-weight consolidation. The test results show that the length of drying time can be shortened by increasing temperature and ultrasound power. The drying time plays a dominant role in the determination of the total energy consumption. This is because reduction of drying time leads to significant decrease in energy consumption for thermal drying, and the energy consumption for additional ultrasound is relatively marginal. For thermal drying at temperatures 60 and 100°C, when combined with 100 W ultrasound, the length of drying time was shortened by 44.19% and 45.16%, and the energy consumption was saved by 30.07% and 38.16%, respectively; when combined with 60 W ultrasound, the length of drying time was shortened by 4.65% and 6.45%, but the energy consumption was increased by 9.79% and 0.48%, respectively. The combination of thermal drying and 100 W ultrasound is found to be optimal in terms of drying rate and energy consumption for silt drying.

The World Health Organization (WHO) recognizes point-of-use water treatment (PoUWT) technologies as effective means to improve water quality. This paper investigates long-term performance and social acceptance of a novel PoUWT technology, a silver-infused ceramic tablet, in Limpopo Province, South Africa. When placed in a water storage container, the silver-embedded ceramic tablet releases silver ions into water, thereby disinfecting microbial pathogens and leaving the water safe for human consumption. As a result of its simplicity and efficiency, the silver-embedded ceramic tablet can serve as a stand-alone PoUWT method and as a secondary PoUWT to improve exisitng PoUWT methods, such as ceramic water filters. In this paper, three PoUWT interventions were conducted to evaluate the silver-embedded ceramic tablet: (1) the silver-embedded ceramic tablet as a stand-alone PoUWT method, (2) ceramic water filters stand-alone, and (3) a filter-tablet combination. The filter-tablet combination evaluates the silver-embedded ceramic tablet as a secondary PoUWT method when placed in the lower reservoir of the ceramic water filter system to provide residual disinfection post-filtration. Samples were collected from 79 households over one year and analyzed for turbidity, total silver levels and coliform bacteria. Results show that the silver-embedded ceramic tablet effectively reduced total coliform bacteria (TC) and E. coli when used as a stand-alone PoUWT method and when used in combination with ceramic water filters. The silver-embedded ceramic tablet's performance as a stand-alone PoUWT method was comparable to current inexpensive, single-use PoUWT methods, demonstrating 100% and 75% median reduction in E. coli and TC, respectively, after two months of use. Overall, the the filter-tablet combination performed the best of the three interventions, providing a 100% average percent reduction in E. coli over one year. User surveys were also conducted and indicated that the silver-embedded ceramic tablet was simple to use and culturally appropriate. Also, silver levels in all treated water samples remained below 20 μg/L, significantly lower than the drinking water standard of 100 μg/L, making it safe for consumption. Long-term data demonstrates that the silver-embedded ceramic tablet has beneficial effects even after one year of use. This study demonstrates that the silver-embedded ceramic tablet can effectively improve water quality when used alone, or with ceramic water filters, to reduce rates of recontamination. Therefore, the tablet has the potential to provide a low-cost means to purify water in resource-limited settings.

In recent years, spread of invasive alien plant species (IAPS) has been a major concern in Nepal. One such IAPS is Ageratum houstonianum, an Asteraceae, that is a prolific seed producer and difficult-to-control in farmland and various ecological regions causing crop yield and biodiversity losses. However, very little information is available on the germination biology and ecology of this species. Therefore, experiments were conducted to assess the effect of water stress, pH level, and light requirement on seed germination, and the effect of seed burial depth on seedling emergence. Water stress was simulated by polyethylene glycol solutions ranging from 0-5.56 MPa and pH solutions ranging from 4 to 9 were prepared using hydrochloric acid and sodium hydroxide. Germination tests were conducted in petri dishes lined with filter paper and placed in a controlled environment chamber set at 20° C. Light requirement comparisons were made by having petri dishes wrapped with aluminum foil or left unwrapped. Seedling emergence was evaluated by placing seeds at depths ranging from 0 to 20 mm in the soil. Results indicated that this species was moderately drought-tolerant because germination ceased beyond 0.51 MPa. Greater germination occurred at neutral to acidic than at alkaline pH levels. The seeds were positively photoblastic because no germination occurred under dark condition. No seedlings emerged from seeds placed more than 2 mm deep in the soil, indicating that this is a primarily surface germinating species. These findings will help predict future invasions and in development of management strategies for this IAPS.

There are large amounts of waste activated sludge (WAS) and kitchen waste (KW) produced every year in China. It has been confirmed that anaerobic co-digestion is an effective method to solve this problem. The targets of the present study were optimizing the digestive performances and clearing of the mechanism of bentonite addition by adding bentonite into digestive system. Group M (WAS: KW = 1:2, based on VS) presented higher cumulative methane yield (CMY), where the CMY increased from 19.8 to 36.3 mL/g VS with the bentonite dosage from 0 to 2 g/g VS. After bentonite addition, the lag phase of every digester presented an obvious decrease from 15.1 to 1.4 d. Furthermore, and the moderating effects on microbial community by bentonite. The addition of bentonite improved methane production, and it can also reduce the lag phase of methane production in co-digestion. What's more, bentonite addition increased the speed of pH recovery from 4.2-4.8 to normal level (7.0-8.0) and thus enhanced the system stability. The conclusion of this study can be used to guide practical engineering.

Honey bees (genusApis)are well known for the impressive suite of nest defenses they have evolved to protect their abundant stockpiles of food and the large colonies they sustain. In Asia, honey bees have evolved under tremendous predatory pressure from social wasps in the genusVespa, the most formidable of which are the giant hornets that attack colonies in groups, kill adult defenders, and prey on brood. We document for the first time an extraordinary collective defense used byApis ceranaagainst the giant hornetVespa soror. In response to attack byV.soror,A.ceranaworkers foraged for and applied spots of animal feces around their nest entrances. Fecal spotting increased after colonies were exposed either to naturally occurring attacks or to chemicals that scout hornets use to target colonies for mass attack. Spotting continued for days after attacks ceased and occurred in response toV.soror, which frequently landed at and chewed on entrances to breach nests, but notVespa velutina, a smaller hornet that rarely landed at entrances. Moderate to heavy fecal spotting suppressed attempts byV.sororto penetrate nests by lowering the incidence of multiple-hornet attacks and substantially reducing the likelihood of them approaching and chewing on entrances. We argue thatA.ceranaforages for animal feces because it has properties that repel this deadly predator from nest entrances, providing the first report of tool use by honey bees and the first evidence that they forage for solids that are not derived from plants. Our study describes a remarkable weapon in the already sophisticated portfolio of defenses that honey bees have evolved in response to the predatory threats they face. It also highlights the strong selective pressure honey bees will encounter if giant hornets, recently detected in western North America, become established.

The safety of highly aggregated tourist crowds is a challenging and important issue. This paper not only provided a comprehensive analysis of the accidents of highly aggregated tourist crowds but also determined the occurrence mechanism and coping paths. Based on the analysis of multiple cases, we found that the variable status of highly aggregated tourist crowds was the result of the interaction of three main elements: multisource pressure, state mutations and management responses. A series of factors interact and result in accidents, and the lack of a management response or a low-quality management response is the root cause of such accidents. A high-quality management response is a basic safety precaution for highly aggregated tourist crowds. Therefore, forming a virtuous circle of multisource pressure, state mutations and management responses is an effective path for coping with accidents.

When clothes are worn and washed, they emit fibres into the ecosystem via discharges of sewage that have been linked to the global dispersion of clothing fibres. Facilities that treat sewage divert some fibres from sewage effluent to sludge, but no current methods of filtration eliminate their environmental release. While filters for washing-machines are sold to consumers with the argument they will reduce the emissions of fibres from clothes to the environment, there is insufficient scientific peer-reviewed evidence assessing their ability to retain fibres from washed clothes and reduce environmental contamination. To improve our understanding and develop more realistic methods to assess the efficiency of filters, we washed replicate cotton and polyester garments in replicate domestic front-loaded washing-machines with and without replicate filters (micro- and milli-meter-sized pores), and then quantified the masses of the fibres retained by the filters and those released in the effluent. Here we show micrometer-sized filters significantly reduced the mass of cotton by 67% (F-2,F-6= 11.69, P

Water conservation and economics dictate that fresh produce processors reuse/recirculate the process water. However, the ensuing accumulation of organic matter in water depletes the chlorine sanitizer required for food safety. In this study, we comprehensively investigated chemical compounds that are responsible for water quality in relation to chemical oxygen demand (COD) and chlorine demand (CLD), the two most critical factors associated with water treatment and chlorine replenishment. Simulating commercial fresh-cut wash operations, multiple batches of diced cabbage (0.3 x 0.3 cm2) were washed in the same tank of water. The major components were isolated from the wash water and analyzed by HPLC. Sugars were the predominant compounds (82.7% dry weight) and the major contributor to COD (81.6%), followed by proteins/peptides (7.3% dry weight, 5.3% COD), organic acids (6.2% dry weight, 3.6% COD), and phenolics (0.5% dry weight, 0.5% COD). By repeated time course measures, the effect of these chemicals on CLD are dependent on the chemical structure, concentration in the wash water, and their rate of reaction. Proteins/peptides accounted for about 50% of the total CLD over a 120-min period and phenolics was 21% at 5 min, but diminished with time. The contribution by organic acids and sugars increased continuously, reaching 22% and 16% of total CLD at 120 min of chlorination, respectively. Collectively, these compounds represented 86% of the CLD in cabbage wash water at 5 min and greater than 94% CLD afterwards. This is the first systematic report on the source of COD and CLD during fresh produce washing. It provides essential information for the produce processors to develop safe, effective, and economical wash water treatment/reuse and chlorine replenishment strategies.

The self-cleaning screen filter is one of the most common types used in drip irrigation systems. Backwashing pressure difference and backwashing time for two screen filters with one geometry and two different screens (178 μm and 124 μm) using two water qualities (tap water and sand-water mixture) were studied in a total of 88 runs (42 runs for tap water, 22 and 24 filtration cycles for sand-water mixture and backwashing, respectively). The backwashing pressure difference and backwashing time were calculated using the experimental data, and the results were largely in the range of measured values. Three constraint conditions (flowrate, sand condition and filtration time) of backwashing pressure difference were analysed, and the optimal values of backwashing pressure difference were given as 60.0 and 70.0 kPa for 178 μm and 124 μm filters, respectively. The backwashing time of the screen filter should be an optimal value that ensures that the pressure difference between the internal and external surfaces of the screen decreased to the initial value, and the sand concentration of the backwashed outlet decreased to a small, stable value. Based on the results of the backwashing experiment and prototype observation, the optimal backwashing time was given as 30 to 45 s for both screen filters.

Assimilable organic carbon (AOC) is known to correlate with microbial growth, which can consequently degrade drinking water quality. Despite this, there is no standardised AOC test that can be applied to drinking water distribution systems (DWDS). Herein we report the development of a quick, robust AOC that incorporates known strains Pseudomonas fluorescens strain P-17 and Spirillum strain NOX, a higher inoculum volume and enumeration using flow cytometry to generate a quicker (total test time reduced from 14 to 8 days), robust method. We apply the developed AOC test to twenty drinking water treatment works (WTW) to validate the method reproducibility and resolution across a wide range of AOC concentrations. Subsequently, AOC was quantified at 32 sample points, over four DWDS, for a year in order to identify sinks and sources of AOC in operative networks. Application of the developed AOC protocol provided a previously unavailable insight and novel evidence of pipes and service reservoirs exhibiting different AOC and regrowth behaviour. Observed correlations between AOC and microbial growth highlight the importance of monitoring AOC as an integral part of managing drinking water quality at the consumers tap.

The current technologies of algal biofuels production and wastewater treatment (e.g., aerobic) process are still in question, due to the significant amount of fresh water and nutrients requirements for microalgae cultivation, and negative energy balance in both processes, especially when considered in the context of developing counties around the world. In this research, a simplistic sustainable approach of algal biofuels production from wastewater was proposed using a Hybrid Anaerobic Baffled Reactor (HABR) and Photobioreactor (PBR) system. The study suggests that the HABR was capable of removing most of the organic and solid (>90% COD and TSS removal) from wastewater, and produced a healthy feedstock (high N: P = 3:1) for microalgae cultivation in PBRs for biofuels production. A co-culture of Chlorella vulgaris, Chlorella sorokiniana, and Scenedesmus simris002 showed high lipid content up to 44.1%; and the dominant FAMEs composition (C16-C18) of 87.9% in produced biofuels. Perhaps, this proposed low-cost technological approach (e.g., HABR-PBR system) would connect the currently broken link of sustainable bioenergy generation and wastewater treatment pathway for developing countries.

Proteins, metabolites, and 16S rRNA measurements were used to examine the community structure and functional relationships within a cellulose degrading anaerobic bioreactor. The bioreactor was seeded with bovine rumen fluid and operated with a 4 day hydraulic retention time on cellulose (avicel) as sole carbon and energy source. The reactor performance and microbial community structure was monitored during the establishment of the cellulose-degrading community. After stable operation was established in the bioreactor, the mixing intensity was increased in order to investigate the effect of a physical disruption of the microbial community structure. Finally, the original conditions were re-established to understand the stability of the microbial community after a perturbation. All factors measured were found to be inter-correlated during these three distinct phases of operation (establishment, perturbation and re-establishment). In particular, the return of community structure and function to pre-perturbed conditions suggests that propionate fermentation and acetate utilization were the explanatory factors for community establishment and re-establishment.

Slime mold species in the genus Dictyostelium are considered to have a close relationship with non-parasitic nematodes; they are sympatric in soils and can exhibit interspecific competition for food. We investigated whether this relationship extends to a plant-parasitic nematode that is active in the rhizosphere and has broad host specificity, damaging crops worldwide. Using a novel assay to examine the interaction between the cellular slime mold, Dictyostelium discoideum, and the plant-parasitic nematodes, Meloidogyne spp., we found that cellular slime molds can repel plant parasitic nematodes. Specifically, the repulsion activity was in response to chemical compounds released by cellular slime mold fruiting bodies. Under laboratory conditions, these soluble chemical extracts from fruiting bodies of D. discoideum showed repulsion activity strong enough to protect plant roots. The fruiting body cell extracts repelled but were not toxic to the plant-parasitic nematodes.

This study aimed to establish a new methodology for upgrading biomass quality using low-temperature (below 100 degrees C) oxidation to achieve simultaneous drying and decomposition. Sterilized manure (63% wet basis) was heated at 90 degrees C for 49 days under an oxidative environment. The obtained solid and moisture reduction curves indicated that drying and decomposition proceeded simultaneously. The biomass was decomposed by oxidation with the release of water, carbon dioxide, and volatile fatty acids such as acetic acid. The oxidation process stopped when the biomass was dehydrated, indicating that the water originally present in the biomass governed the process. Elemental and calorific analyses revealed no remarkable increase in carbon content or increased heating value, and a slight decrease in oxygen content. Although the severity of the process was insufficient to produce an optimum solid fuel due to the low temperature used, the process would enable the stabilization of waste biomass with low energy consumption such as using waste heat.

Deconstruction of the cellulose in plant cell walls is critical for carbon flow through ecosystems and for the production of sustainable cellulosic biofuels. Our understanding of cellulose deconstruction is largely limited to the study of microbes in isolation, but in nature, this process is driven by microbes within complex communities. In Neotropical forests, microbes in leaf-cutter ant refuse dumps are important for carbon turnover. These dumps consist of decaying plant material and a diverse bacterial community, as shown here by electron microscopy. To study the portion of the community capable of cellulose degradation, we performed enrichments on cellulose using material from five Atta colombica refuse dumps. The ability of enriched communities to degrade cellulose varied significantly across refuse dumps. 16S rRNA gene amplicon sequencing of enriched samples identified that the community structure correlated with refuse dump and with degradation ability. Overall, samples were dominated by Bacteroidetes, Gammaproteobacteria, and Betaproteobacteria. Half of abundant operational taxonomic units (OTUs) across samples were classified within genera containing known cellulose degraders, including Acidovorax, the most abundant OTU detected across samples, which was positively correlated with cellulolytic ability. A representative Acidovorax strain was isolated, but did not grow on cellulose alone. Phenotypic and compositional analyses of enrichment cultures, such as those presented here, help link community composition with cellulolytic ability and provide insight into the complexity of community-based cellulose degradation. Biological and Environmental Research/[DE-FC02-07ER64494]/BER/Estados Unidos National Science Foundation/[DGE-1256259]/NSF/Estados Unidos National Science Foundation/[DEB-0747002]/NSF/Estados Unidos National Science Foundation/[MCB-0702025]/NSF/Estados Unidos National Institutes of Health/[T32 GM07215]/NIH/Estados Unidos Universidad de Costa Rica/[]/UCR/Costa Rica Ministerio de Ciencia, Tecnología y Telecomunicaciones/[]/MICITT/Costa Rica University of Wisconsin-Madison's Hilldale Undergraduate Faculty Research Fellowship/[]//Estados Unidos UCR::Vicerrectoría de Investigación::Unidades de Investigación::Ciencias Básicas::Centro de Investigación en Biología Celular y Molecular (CIBCM)

The Multi-Criteria Decision Analysis (MCDA) procedure was used to compare waste management options for kraft pulp mill sludge following its anaerobic digestion. Anaerobic digestion of sludge is advantageous because it produces biogas that may be used to generate electricity, heat and biofuels. However, adequate management of the digested sludge is essential. Landfill disposal is a non-sustainable waste management alternative. Kraft pulp mill digested sludge applied to land may pose risks to the environment and public health if the sludge has not been properly treated. This study is aimed to compare several recycling alternatives for anaerobically digested sludge from kraft pulp mills: land application, landfill disposal, composting, incineration, pyrolysis/gasification, and biofuel production by algae. The MCDA procedure considered nine criteria into three domains to compare digested sludge recycling alternatives in a kraft pulp mill: environmental (CO2 emission, exposure to pathogens, risk of pollution, material and energy recovery), economic (overall costs, value of products) and technical (maintenance and operation, feasibility of implementation). The most suitable management options for digested sludge from kraft pulp mills were found to be composting and incineration (when the latter was coupled with recycling ash to the cement industry). Landfill disposal was the worst option, presenting low performance in feasibility of implementation, risk of pollution, material and energy recovery.

Although there are a variety of commercially available biological and chemical treatments for removal of hydrogen sulfide (H2S) from biogas, managing biogas H2S remains a significant challenge for agricultural digesters where labor and operational funds are very limited compared to municipal and industrial digesters. The objectives of this study were to evaluate headspace aeration for reducing H2S levels in low cost plug flow digesters and to characterize the relationship between the liquid surface area and H2S oxidation rates. Experiments with replicate field scale plug flow digesters showed that H2S levels decreased from 3500 ppmv to

Organic materials in fresh-cut produce wash water deplete free chlorine that is required to prevent pathogen survival and cross-contamination. This research evaluated water quality parameters frequently used to describe organic load for their fitness to predict chlorine demand (CLD) and chemical oxygen demand (COD), which are major needs identified by the industry-led produce food safety taskforce. Batches of romaine lettuce, iceberg lettuce, or carrot of different cut sizes and shapes were washed in 40 liters of water. Physicochemical properties of wash water including CLD, COD, total organic carbon (TOC), total suspended solids (TSS), total dissolved solids (TDS), turbidity, total sugar content, and pH, were monitored. Results indicate that pH is primarily commodity dependent, while organic load is additionally impacted by cutting and washing conditions. Significant linear increases in COD, TOC, CLD, TDS, and turbidity resulted from increasing product-to-water ratio, and decreasing cut size. Physicochemical parameters, excluding pH, showed significant positive correlation across different cut sizes within a commodity. High correlations were obtained between CLD and COD and between COD and TOC for pooled products. The convenient measurement of TDS, along with its strong correlation with COD and CLD, suggests the potential of TDS for predicting organic load and chlorine reactivity. Finally, the potential application and limitation of the proposed models in practical produce processing procedures are discussed extensively.

Stormwater biofilters are used to attenuate the flow and volume of runoff and reduce pollutant loading to aquatic systems. However, the capacity of biofilters to remove microbial contaminants remains inadequate. While biochar has demonstrated promise as an amendment to improve microbial removal in laboratory-scale biofilters, it is uncertain if the results are generalizable to the field. To assess biochar performance in a simulated field setting, sand and biochar-amended sand biofilters were periodically dosed with natural stormwater over a 61-week conditioning phase. Impact of media saturation was assessed by maintaining biofilters with and without a saturated zone. Biochar-amended biofilters demonstrated improved Escherichia coli removal over sand biofilters during the first 31 weeks of conditioning though media type did not impact E. coli removal during the last 30 weeks of conditioning. Presence of a saturated zone was not a significant factor influencing E. coli removal across the entire conditioning phase. Following conditioning, biofilters underwent challenge tests using stormwater spiked with wastewater to assess their capacity to remove wastewater-derived E. coli, enterococci, and male-specific (F+) coliphage. In challenge tests, biochar-amended biofilters demonstrated enhanced removal of all fecal indicators relative to sand biofilters. Additionally, saturated biofilters demonstrated greater removal of fecal indicators than unsaturated biofilters for both media types. Discrepant conclusions from the conditioning phase and challenge tests may be due to variable influent chemistry, dissimilar transport of E. coli indigenous to stormwater and those indigenous to wastewater, and differences in E. coli removal mechanisms between tests. Mobilization tests conducted following challenge tests showed minimal (