Search

This paper studies the heterogeneous effects of exchange rate and stock market on carbon emission allowance price in four emissions trading scheme pilots in China. We employ a panel quantile regression model, which can describe both individual and distributional heterogeneity. The empirical results illustrate that the effects of explanatory variables on carbon emission allowance price is heterogeneous along the whole quantiles. Specifically, exchange rate has a negative effect on carbon emission allowance price at lower quantiles, while becomes a positive effect at higher quantiles. In addition, a negative effect exists between domestic stock market and carbon emission allowance price, and the intensity decreasing along with the increase of quantile. By contrast, an increasing positive effect is discovered between European stock market and domestic carbon emission allowance prices. Finally, heterogeneous effects on carbon emission allowance price can also be proved in European Union Emission Trading Scheme (EU-ETS). [ABSTRACT FROM AUTHOR]

Compared with the idealized isotropic coal seam, the effectively cracking distances of deep-hole pre-splitting blasting in different directions have significant difference in the structural anisotropy of coal seam. In this paper, based on the test results of coal mechanical parameters in different coring directions, the blasting crack distances in these coring directions of coal seam are theoretically calculated and analyzed, and then a new method of blasthole layout in coal seam is designed and the blasting crack effect is investigated according to the test data of gas drainage. The research results show that both compressive strength and tensile strength of the direction of perpendicular to bedding are larger than that in other directions, especially parallel to bedding. The blasting crack distances of calculation results are in great agreement with that of underground in-situ measurement, so the blasting crack zone caused by the differences of mechanical properties in different directions can be approximately treated as an ellipse. Comparing the conventional method of blasthole layout, the blasting crack effect with new method has greatly enhanced the methane concentration and gas drainage quantity. Pure methane quantities with the new method and conventional method are about 2.8 times and 1.67 times as large as that before blasting, and pure methane quantity with the new method is about 1.46 times that with the conventional method. Therefore, considering the anisotropic characteristics of coal seams, the reasonable blasthole layout plays an important role for enhancing gas drainage in low permeability and outburst working face. [ABSTRACT FROM AUTHOR]

The data collected by mobile methane (CH4) sensors can be used to find natural gas (NG) leaks in urban distribution systems. Extracting actionable insights from the large volumes of data collected by these sensors requires several data processing steps. While these survey platforms are commercially available, the associated data processing software largely constitute a black box due to their proprietary nature. In this paper we describe a step-by-step algorithm for developing leak indications using data from mobile CH4 surveys, providing an under-the-hood look at the choices and challenges associated with data analysis. We also describe how our algorithm has evolved over time, and the data-driven insights that have prompted these changes. Applying our algorithm to data collected in 15 cities produced more than 6100 leak indications and estimates of the leaks’ size. We use these results to characterize the distribution of leak sizes in local NG distribution systems. Mobile surveys are already an effective and necessary tool for managing NG distribution systems, but improvements in the technology and software will continue to increase its value. [ABSTRACT FROM AUTHOR]

This paper presents preliminary results about Turin’s air quality before, during and after the realization of the infrastructure projects for the Turin 2006 XX Winter Olympic Games. We compared the 3-year in-operam (work in progress) period (i.e. 2003–2005, when all infrastructures needed for the organization were built) with the periods before (ante-operam) and after (post-operam): 2000–2002 and 2006–2008, respectively. In particular, we analyzed the concentrations of the primary pollutants (nitrogen dioxide, carbon monoxide and fine particulate matter, PM10) in Turin and Milan. In this way, we could use the measurements from Milan as a control dataset for comparison with the atmospheric pollution conditions in Turin. We found that infrastructural work for the Olympic Games in Turin affected NO2 and PM10 atmospheric concentrations, determining a peak in the average values during the in-operam period (probably due to caterpillar tractor emissions and excavation). This pattern did not emerge from the Milan data, where a decreasing trend can be seen between the ante-operam and the post-operam periods. On the other hand, a negative effect on CO levels was not observed: the decreasing trend, more evident in Turin compared to Milan, can be linked to the expansion during the same period of limited traffic areas created to facilitate the infrastructural work. [ABSTRACT FROM AUTHOR]

Accurate reporting and forecasting of PM2.5 concentration are important for improving public health. In this paper, we propose a partial differential equation (PDE) model, specially, a linear diffusive equation, to describe the spatial-temporal characteristics of PM2.5 in order to make short-term prediction. We analyze the temporal and spatial patterns of a real dataset from China’s National Environmental Monitoring and validate the PDE-based model in terms of predicting the PM2.5 concentration of the next day by the former days’ history data. Our experiment results show that the PDE model is able to characterize and predict the process of PM2.5 transport. For example, for 300 continuous days of 2016, the average prediction accuracy of the PDE model over all city-regions is 93% or 83% based on different accuracy definitions. To our knowledge, this is the first attempt to use PDE-based model to study PM2.5 prediction in both temporal and spatial dimensions. [ABSTRACT FROM AUTHOR]

The selection of seismic attributes is a key process in reservoir prediction because the prediction accuracy relies on the reliability and credibility of the seismic attributes. However, effective selection method for useful seismic attributes is still a challenge. This paper presents a novel selection method of seismic attributes for reservoir prediction based on the gray relational degree (GRD) and support vector machine (SVM). The proposed method has a two-hierarchical structure. In the first hierarchy, the primary selection of seismic attributes is achieved by calculating the GRD between seismic attributes and reservoir parameters, and the GRD between the seismic attributes. The principle of the primary selection is that these seismic attributes with higher GRD to the reservoir parameters will have smaller GRD between themselves as compared to those with lower GRD to the reservoir parameters. Then the SVM is employed in the second hierarchy to perform an interactive error verification using training samples for the purpose of determining the final seismic attributes. A real-world case study was conducted to evaluate the proposed GRD-SVM method. Reliable seismic attributes were selected to predict the coalbed methane (CBM) content in southern Qinshui basin, China. In the analysis, the instantaneous amplitude, instantaneous bandwidth, instantaneous frequency, and minimum negative curvature were selected, and the predicted CBM content was fundamentally consistent with the measured CBM content. This real-world case study demonstrates that the proposed method is able to effectively select seismic attributes, and improve the prediction accuracy. Thus, the proposed GRD-SVM method can be used for the selection of seismic attributes in practice. [ABSTRACT FROM AUTHOR]

Biomass gasification stations are facing many hazard factors, therefore, it is necessary to make hazard assessment for them. In this study, a novel hazard assessment method called extended set pair analysis (ESPA) is proposed based on set pair analysis (SPA). However, the calculation of the connection degree (CD) requires the classification of hazard grades and their corresponding thresholds using SPA for the hazard assessment. In regard to the hazard assessment using ESPA, a novel calculation algorithm of the CD is worked out when hazard grades and their corresponding thresholds are unknown. Then the CD can be converted into Euclidean distance (ED) by a simple and concise calculation, and the hazard of each sample will be ranked based on the value of ED. In this paper, six biomass gasification stations are introduced to make hazard assessment using ESPA and general set pair analysis (GSPA), respectively. By the comparison of hazard assessment results obtained from ESPA and GSPA, the availability and validity of ESPA can be proved in the hazard assessment for biomass gasification stations. Meanwhile, the reasonability of ESPA is also justified by the sensitivity analysis of hazard assessment results obtained by ESPA and GSPA. [ABSTRACT FROM AUTHOR]

Today, China is facing a very serious issue of Air Pollution due to its dreadful impact on the human health as well as the environment. The urban cities in China are the most affected due to their rapid industrial and economic growth. Therefore, it is of extreme importance to come up with new, better and more reliable forecasting models to accurately predict the air quality. This paper selected Beijing, Tianjin and Shijiazhuang as three cities from the Jingjinji Region for the study to come up with a new model of collaborative forecasting using Support Vector Regression (SVR) for Urban Air Quality Index (AQI) prediction in China. The present study is aimed to improve the forecasting results by minimizing the prediction error of present machine learning algorithms by taking into account multiple city multi-dimensional air quality information and weather conditions as input. The results show that there is a decrease in MAPE in case of multiple city multi-dimensional regression when there is a strong interaction and correlation of the air quality characteristic attributes with AQI. Also, the geographical location is found to play a significant role in Beijing, Tianjin and Shijiazhuang AQI prediction. [ABSTRACT FROM AUTHOR]

In this paper, a statistically-based experimental design with response surface methodology (RSM) was employed to examine the effects of functional conditions on the photoelectrocatalytic oxidation of landfill leachate using a Cu/N co-doped TiO2 (Ti) electrode. The experimental design method was applied to response surface modeling and the optimization of the operational parameters of the photoelectro-catalytic degradation of landfill leachate using TiO2 as a photo-anode. The variables considered were the initial chemical oxygen demand (COD) concentration, pH and the potential bias. Two dependent parameters were either directly measured or calculated as responses: chemical oxygen demand (COD) removal and total organic carbon (TOC) removal. The results of this investigation reveal that the optimum conditions are an initial pH of 10.0, 4377.98mgL-1 initial COD concentration and 25.0 V of potential bias. The model predictions and the test data were in satisfactory agreement. COD and TOC removals of 67% and 82.5%, respectively, were demonstrated. Under the optimal conditions, GC/MS showed 73 organic micro-pollutants in the raw landfill leachate which included hydrocarbons, aromatic compounds and esters. After the landfill leachate treatment processes, 38 organic micro-pollutants disappeared completely in the photoelectrocatalytic process. [ABSTRACT FROM AUTHOR]

Although studies have increasingly linked air pollution to specific health outcomes, less well understood is how public perceptions of air quality respond to changing pollutant levels. The growing availability of air pollution measurements and the proliferation of social media provide an opportunity to gauge public discussion of air quality conditions. In this paper, we consider particulate matter (PM) measurements from four Chinese megacities (Beijing, Shanghai, Guangzhou, and Chengdu) together with 112 million posts on Weibo (a popular Chinese microblogging system) from corresponding days in 2011–2013 to identify terms whose frequency was most correlated with PM levels. These correlations are used to construct an Air Discussion Index (ADI) for estimating daily PM based on the content of Weibo posts. In Beijing, the Chinese city with the most PM as measured by U.S. Embassy monitor stations, we found a strong correlation (R = 0.88) between the ADI and measured PM. In other Chinese cities with lower pollution levels, the correlation was weaker. Nonetheless, our results show that social media may be a useful proxy measurement for pollution, particularly when traditional measurement stations are unavailable, censored or misreported. [ABSTRACT FROM AUTHOR]