Search

金沢大学融合研究域融合科学系, The purpose of this paper is to present a new predictive control utilizing online data and stored data of input/output of the controlled system. The conventional predictive control methods utilize the mathematical model of the control system to predict an optimal future input to control the system. The model is usually obtained by a standard system identification method from the measured input/output data. The proposed method does not require the mathematical model to predict the optimal future control input to achieve the desired output. This control strategy, called just-in-time, was originally proposed by Inoue and Yamamoto in 2004. In this paper, we proposed a simplified version of the original just-in-time predictive control method. © (2014) Trans Tech Publications, Switzerland., 研究者情報DB

A multiscale constitutive framework for Ni-base superalloys has been developed, in which an efficient unit cell is adopted to describe the γ/γ’ microstructure morphology. The framework enables the prediction of the deformation and the creep and fatigue damage accumulation in CMSX-4 for a range of temperatures and stress levels. Moreover, the material microstructural degradation due to rafting and isotropic coarsening can be simulated, and the effects of this degradation on the alloy mechanical response can be quantified. The present paper focuses on the application of the model to real gas turbine components. A high pressure turbine blade finite element model is used to demonstrate the computational efficiency of the multiscale framework. Moreover, the location of critical regions and the life time are shown to differ from the results obtained from classical models that neglect the microstructure evolution.

The diffusion coefficient in the metallic glass-forming systems such as Pd-Cu-Ni-P exhibits a marked deviation from the Stokes-Einstein (SE) relation in the proximity of the glass transition temperature. Such a deviation is characterized by the fractional exponent p of the modified SE expression. For the material Pd43Cu27Ni10P20, it has been reported that it takes the value p = 0.75. In this work, it is shown that the value of p is highly correlated with the ratio ED / ENB, where ED and ENB are the activation energies for diffusion coefficient D and cooperativity NB defined by the Bond Strength-Coordination Number Fluctuation (BSCNF) model. The present paper reports that for the metallic glass-forming melt Pd43Cu27Ni10P20, the fractional exponent p can be calculated accurately within the framework of the BSCNF model

This paper presents a review of the methods for seismic vulnerability assessment, together with an experimental method based on shaking table testing. This method is applied to a Portuguese masonry building typology with stone walls and timber floors, subjected to increasing earthquake damage. Traditional-like materials and techniques are used in the building. The vulnerability curves are presented and the damage indicator is correlated with the crack patterns and EMS 98.

International audience; The ACCENT Project (FP7- AAT- 2007- RTD-1) will allow the European Aero Engine manufacturers to improve their competitiveness by applying adaptive control techniques to the manufacturing of their components. For the critical rotating parts of aircraft engines, the surface integrity generated after machining is a key factor on the life cycle. In this context, one particular attention has to be carried out on tool condition. The aim of this paper is to define a monitoring approach able to detect the tool condition and machining disturbances. The main failure modes characterizing this particular Nickel base drilling and the apparition of embedded chips over the machined surface were identified. By experimental techniques, cartography of failure modes was performed. The results show that flank wear and notch are the main failure modes limiting the tool life. For some cutting conditions, the tool failure occurs after the first hole due to the important cutting forces. Some interesting combinations are made between the spindle current/accelerometers/ thrust force and flank wear, tool breakage and notch. Before these correlations, a detailed signal analysis was performed, considering different disturbing phenomena, such as chips evacuation problem. Finally, a "synopsis" for process monitoring is proposed, considering the analyzed phenomena.

Thermomechanical fatigue (TMF) in superalloys is growing in importance due to the introduction of advanced cooling systems but also due to the changes in demand and competition within the power generation market; this is requiring many power plants to operate under cyclic conditions. In this paper the TMF behaviour of three different single crystal nickel-based superalloys are compared. It is demonstrated that the deformation and damage mechanisms occurring during TMF are rather different from those traditionally reported for creep or isothermal fatigue. In all cases examined, the deformation is localized within a rather small number of deformation bands. While these bands were found to consist mainly of micro-twins in some alloys, in others they might be better described as slip or shear bands. Furthermore, in some circumstances these bands are prone to recrystallization. In CMSX-4, the intersection points of twins of different orientation act as initiation sites for this process. In the SCA425 alloy - of smaller gamma' content, lower creep resistance and less great oxidation resistance - twinning is observed infrequently; however the deformation is still very localized and in the distorted gamma-gamma' microstructure, along the shear bands, recrystallization is observed. Furthermore the recrystallization is enhanced by oxidation due to the development of a gamma'-depleted zone. In CMSX-4, TCP phases precipitated during long term ageing cause a more dispersed deformation behaviour which prevents recrystallization. Our findings confirm the importance of an inhomogeneous microstructure for good TMF resistance. © (2011) Trans Tech Publications Switzerland.