Search

Owing to the faradaic oxidation and reduction reactions mainly taking place on surface, enlarging the specific surface of redox materials is one of the most effective ways to achieve excellent electrochemical performance. Here we report a binder-free three dimensional (3D) architecture electrode consisting of a graphene 3D network (G3DN) structure growing on flexible carbon paper (CP) by chemical vapor deposition and NiO nanoparticles growing on the G3DN by in-situ thermal decomposition for high rate battery and high-performance electrochemical capacitors. Such a nanostructure provides a large specific surface and fast electronic transmission channels. The unique structure design for this electrode enables outstanding performance, showing high specific capacity of 89.1 mAh cm −2 (119.2 mAh/g) at current density of 0.5 mA cm −2 (0.67 A/g) with the NiO loading of 0.7471 mg cm −2 . Meanwhile the electrode displays excellent rate capability and cycling stability, which keeps 85.48% of initial capacity after 3000 deep-discharge cycles. Furthermore, a solid-state symmetric electrochemical capacitor based on two NiO/G3DN/CP electrodes with an area of 4 cm 2 each is fabricated, and two pieces of them in series can light up 100 green LEDs for 2 min. The architecture of G3DN loaded with NiO might be generally applied to different kinds of nanomaterials for high-rate energy storage to improve their overall electrochemical performance. [ABSTRACT FROM AUTHOR]

Abstract: This paper describes a new signal amplification strategy based on ionic liquid-doped chitosan film as a matrix and Au nanoparticle decorated graphene nanosheets (AuNP–graphene) as labels for the sensitivity improvement of an electrochemical immunosensor. At first, an ionic liquid was doped into ferrocene-branched chitosan film to obtain a novel redox composite, which was employed as an antibody immobilization matrix due to its better biocompatibility and higher electron transfer mobility. Then, the AuNP–graphene were prepared by a one-pot method in a aqueous-phase synthesis and were provided with a large surface area and multiple binding sites to allow high accessibility for the immobilization of secondary antibody (Ab2) and horseradish peroxidase (HRP). Based on the sandwich immunoassay format, the electrochemical signal could be amplified and adequately achieved, according to the catalytic reaction of the carried HRP towards the reduction of H2O2 with the aid of the IL and ferrocene synergistic effect. Using Immunoglobulin G (IgG) as a protein model, a good and repeatable linear relationship was found between the electrical signal outputs and human IgG concentration on a logarithm scale for a wide range of 2.0×10−10 to 5.0×10−7 g/mL, with a detection limit of 50pg/mL. In conclusion, the use of ionic liquid-doped chitosan redox film and AuNP–graphene greatly enhances the electrochemical signal and shows high sensitivity. [Copyright &y& Elsevier]