Search

Flexible graphene‐based paper electrodes (FGPEs) are a new class of study and the research on this electrode material has been carried out for approximately ten years. FGPEs have many advantages compared to classical solid electrodes such as being flexible, foldable, adaptable to flexible electronics, being cut, easily shaped, and effective and adjustable modification. In this work, the applicability of FGPEs modified with polyindole (PIN) thin films and zinc oxide nanoparticles (ZnO‐NPs) to energy‐storage systems as a supercapattery design is presented, and especially the limitations of ZnO‐NPs for energy‐storage applications are revealed to inform researchers working for a similar purpose. Capacitance calculations have been performed using both cyclic voltammetry (CV) and galvanostatic charge‐discharge (GCD) experiments. It was observed that the rGO/PIN paper demonstrated almost 30 times more energy‐storage capacity than that of the rGO/PIN/ZnO paper due to the electrochemical instability of ZnO‐NPs on the flexible electrode platform at the applied potential region in 1.0 M HClO4 solution. The rGO/PIN paper with a highly flexible property exhibited an energy density of 74.5 W h cm−2 and a power density of 2258 W cm−2 at a current density of 2.2 mA cm−2, revealing hopeful results for future modular and flexible approaches. [ABSTRACT FROM AUTHOR]

The present study reports the fabrication of reduced graphene oxide (rGO)/gold nanoparticles (AuNP) nanocomposites modified cellulose fiber paper‐based electrochemical biosensor for procalcitonin (PCT) biomarker detection. PCT is a biomarker specific for bacterial infection (BI) detection and has gained much attention as a potential solution to the problems associated with determining appropriate antibiotic use. In sepsis and other severe infections, serum PCT levels increase to values above 100 ng mL−1 in response to pro‐inflammatory stimulation. The structural and morphological characterization of the rGO‐AuNP composite are investigated using UV‐Vis spectroscopy, FTIR spectroscopy, X‐ray diffraction, and scanning electron microscopy. Monoclonal antibodies specific to PCT were covalently immobilized onto the rGO‐AuNP nanocomposite modified paper to fabricate an electrochemical biosensor. The fabricated biosensor exhibits linearity in the PCT concentration range 10 −15×103 pg mL−1, with a low detection limit 10 pg mL−1. Furthermore, the proposed biosensor also exhibited good selectivity and could detect PCT biomarkers even in the presence of other interfering electroactive species such as glucose, oxalic acid, and urea. The proposed CF‐based biosensor has been proven as an accelerated simple point‐of‐care (POC) exploratory approach for early PCT diagnosis in inadequate areas with limited production facilities, computational techniques, and highly skilled experts. [ABSTRACT FROM AUTHOR]

Herein, we prepared a bisuppport‐based bimetallic nanoparticle composite AuFe/ZIF‐8‐graphene. It exhibited high peroxidase activity compared to those hybrids without graphene support, which demonstrated the regulatory effect of graphene on the catalytic activity. SEM, TEM, EDX, XRD, FT‐IR and XPS characterization showed that Au and Fe3O4 NPs were successfully immobilized on ZIF‐8‐rGO carriers. Kinetic analysis confirmed that the fabricated composites showed better Km and Vmax for H2O2 than HRP and some other reported peroxidase mimics. Under the optimal conditions, a sensing assay for H2O2 determination was constructed with a linear detection range of 0.01–2.5 mM and a detection limit of 0.63 μM. On this basis, a colorimetric test paper with its standard card was prepared for rapid visualization detection. It realized H2O2 detection in the range of 0.01‐500 mM and was further successfully applicated in the semi‐quantitative detection of H2O2 in actual spiked water samples. This achievement was expected to encourage the development of rapid visual detection for other pollutants in environmental and medical field. [ABSTRACT FROM AUTHOR]

The flexible electrodes are the crucial components for fabricating wearable supercapacitors. In this study, we present a quick and convenient method to prepare graphene paper (GP) as a flexible current collector on a large scale by an easy one‐step method. The composite electrode integrated with GP and MnO2 as a flexible supercapacitor was obtained by an electrochemical deposition method without using binder or conductive agent. The substrate (GP) of electrode not only provides mechanical strength, but also contributes energy storage capacity. The MnO2 nanoparticles deposited on the surface of GP further improved the electrochemical performance of composite. The neat GP can give a specific capacitance of 184 F/g at a current density of 1 A/g. At a current density of 1 A/g, the specific capacitance of the GP/MnO2 composite with a deposition time of 30 s is as high as 410 F/g. The method presented here shows great potential for the development of flexible electrode materials in practical energy storage devices. [ABSTRACT FROM AUTHOR]

Graphene Quantum Dots (GQDs) are carbon‐based, nanoscale particles that display remarkable physical and organic properties. They are chemically and physically stable and eco‐friendly due to their non‐toxic and biologically inert nature. Various bioresources are used to synthesize GQDs to ensure biosafety and cost‐effectiveness. In this work, a critical review has been done by focusing on top‐down and bottom‐up synthesis strategies. GQDs by valorizing various bioresources like bamboo, neem leaves, mango leaves, paper fibers, rice husk, starch, honey, wood charcoal, coffee grounds, corn powder, and lime oil extract is highlighted in the present review. State‐of‐the‐art and future outlooks on the development and advancement of GQDs applications are also being addressed. Based on the surveyed literature, GQDs provide extensive use in various areas like bioimaging, nanomedicine, photocatalysis, light‐emitting diodes, solar cells, and sensors. [ABSTRACT FROM AUTHOR]