Search

Background Brucellosis, as a serious zoonotic infectious disease, has been recognized as a re-emerging disease in the developing countries worldwide. In china, the incidence of brucellosis is increasing each year, seriously threatening the health of humans as well as animal populations. Despite a quite number of diagnostic methods currently being used for brucellosis, innovative technologies are still needed for its rapid and accurate diagnosis, especially in area where traditional diagnostic is unavailable. Methodology/Principal findings In this study, a total of 22 B cell linear epitopes were predicted from five Brucella outer membrane proteins (OMPs) using an immunoinformatic approach. These epitopes were then chemically synthesized, and with the method of indirect ELISA (iELISA), each of them displayed a certain degree of capability in identifying human brucellosis positive sera. Subsequently, a fusion protein consisting of the 22 predicted epitopes was prokaryotically expressed and used as diagnostic antigen in a newly established brucellosis testing method, nano-ZnO modified paper-based ELISA (nano-p-ELISA). According to the verifying test using a collection of sera collected from brucellosis and non-brucellosis patients, the sensitivity and specificity of multiepitope based nano-p-ELISA were 92.38% and 98.35% respectively. The positive predictive value was 98.26% and the negative predictive value was 91.67%. The multiepitope based fusion protein also displayed significantly higher specificity than Brucella lipopolysaccharide (LPS) antigen. Conclusions B cell epitopes are important candidates for serologically testing brucellosis. Multiepitope fusion protein based nano-p-ELISA displayed significantly sensitivity and specificity compared to Brucella LPS antigen. The strategy applied in this study will be helpful to develop rapid and accurate diagnostic method for brucellosis in human as well as animal populations., Author summary Brucellosis is one of the most important zoonosis in the world and has caused tremendous economic losses in agriculture and animal husbandry in many countries. Developing rapid, sensitive and specific diagnostic methods is very important for early detection and treatment of brucellosis patients. In this study, a novel diagnostic technique, nano-ZnO modified paper ELISA, was established. The antigen used in this technique was a fusion protein containing multiple B cell epitopes, which were predicted from Brucella major outer membrane proteins such as Bp26, Omp31, Omp16, Omp2b and Omp25. Comparing to traditional LPS antigen, this multiepitope based antigen displayed considerably higher sensitivity and higher specificity in laboratory. With the strategy described in this paper, more efficient epitopes and protein antigen can be identified in the future. Currently, LPS antigen is only prepared from live Brucella, while protein antigen can be produced in large quantities in prokaryotic expression system. In addition to nano-p-ELISA, this protein antigen can also be used for development other methods such as fluorescent polarization assay (FPA) and immunochromatographic assay (ICA) to meet the varied demand for brucellosis testing.

Rabies is a lethal zoonotic encephalomyelitis that causes an estimated 59,000 human deaths yearly worldwide. Although developing countries of Asia and Africa bear the heaviest burden, surveillance and disease detection in these countries is often hampered by the absence of local laboratories able to diagnose rabies and/or the difficulties of sample shipment from low-access areas to national reference laboratories. Filter papers offer a convenient cost-effective alternative for the sampling, shipment, and storage of biological materials for the diagnosis of many pathogens including rabies virus, yet the properties of diagnostic tests using this support have not been evaluated thoroughly. Sensitivity and specificity of molecular diagnosis of rabies infection using a reverse transcription followed by a hemi-nested polymerase chain reaction (RT-hn-PCR) either directly on brain tissue or using brain tissue dried on filter paper were assessed on 113 suspected field animal samples in comparison to the direct fluorescent antibody test (FAT) recommended by the World Health Organization as one of the reference tests for rabies diagnosis. Impact of the duration of the storage was also evaluated. The sensitivity and the specificity of RT-hn-PCR i) on brain tissue were 96.6% (95% CI: [88.1–99.6]) and 92.7% (95% CI: [82.4–98.0]) respectively and ii) on brain tissue dried on filter paper 100% (95% CI: [93.8–100.0]) and 90.9% (95% CI: [80.0–97.0]) respectively. No loss of sensitivity of RT-hn-PCR on samples of brain tissue dried on filter paper left 7 days at ambient temperature was detected indicating that this method would enable analyzing impregnated filter papers sent to the national reference laboratory at ambient temperature within a 1-week shipment time. It could therefore be an effective alternative to facilitate storage and shipment of samples from low-access areas to enhance and expand rabies surveillance., Author summary Dogs are responsible for 99% of human rabies deaths. Facilitating diagnostic of rabid dogs can help further identify i) people who were exposed to rabies in order to encourage them to seek post exposure prophylaxis and ii) other exposed animals to break the transmission chain (i.e. prevent them from further transmitting the virus to other people and animals). Yet, the reference diagnostic method for animal rabies requires brain samples to be collected post-mortem and shipped under temperature-controlled conditions. The shipping of such samples is complex in low-access areas, especially in low income countries, which are often those that bear the heaviest rabies burden. Filter papers offer a convenient alternative for biological sample shipment and storage. Here the efficiency of a molecular diagnostic method applied to brain tissue dried on filter paper is compared to one of the reference methods, the direct fluorescent antibody test. Our results show it has an excellent sensitivity (it does not miss any positive samples), even when filter papers are left 7 days at ambient temperature. These results let us foresee a cost-effective alternative facilitating shipment, storage and testing of samples from rabies suspected animals from low-access areas. This could considerably enhance and expand rabies surveillance in low-income countries, allowing a more comprehensive evaluation of rabies burden, and thus reinforcing arguments for allocating funds to rabies control policies.

Background Global estimates for cholera annually approximate 4 million cases worldwide with 95,000 deaths. Recent outbreaks, including Haiti and Yemen, are reminders that cholera is still a global health concern. Cholera outbreaks can rapidly induce high death tolls by overwhelming the capacity of health facilities, especially in remote areas or areas of civil unrest. Recent studies demonstrated that stool specimens preserved on filter paper facilitate molecular analysis of Vibrio cholerae in resource limited settings. Specimens preserved in a rapid, low-cost, safe and sustainable manner for sequencing provides previously unavailable data about circulating cholera strains. This may ultimately contribute new information to shape public policy response on cholera control and elimination. Methodology/Principal findings Whole genome sequencing (WGS) recovered close to a complete sequence of the V. cholerae O1 genome with satisfactory genome coverage from stool specimens enriched in alkaline peptone water (APW) and V. cholerae culture isolates, both spotted on filter paper. The minimum concentration of V. cholerae DNA sufficient to produce quality genomic information was 0.02 ng/μL. The genomic data confirmed the presence or absence of genes of epidemiological interest, including cholera toxin and pilus loci. WGS identified a variety of diarrheal pathogens from APW-enriched specimen spotted filter paper, highlighting the potential for this technique to explore the gut microbiome, potentially identifying co-infections, which may impact the severity of disease. WGS demonstrated that these specimens fit within the current global cholera phylogenetic tree, identifying the strains as the 7th pandemic El Tor. Conclusions WGS results allowed for mapping of short reads from APW-enriched specimen and culture isolate spotted filter papers. This provided valuable molecular epidemiological sequence information on V. cholerae strains from remote, low-resource settings. These results identified the presence of co-infecting pathogens while providing rare insight into the specific V. cholerae strains causing outbreaks in cholera-endemic areas., Author summary Cholera affects more than 4 million people globally every year; people predominantly living in poverty or in resource-constrained conditions including political crises or natural disasters. Cholera’s typical presentation is characterized by rapid onset of acute watery diarrhea and vomiting which can progress from watery stool to shock in as little as four hours. Laboratory conditions needed for culture confirmation and strain preservation are rarely to never present in these affected areas. In fact, many cholera endemic areas in Sub-Saharan African are so remote that even treatment response alone is often challenging. Here we present the genomic analysis of DNA extracted from dried filter paper, which is a low-cost, low-tech and sustainable method. Previously this method has facilitated cholera confirmation by PCR, but we demonstrate that this method is also suitable for whole genome sequencing and subsequent strain characterization by presenting the analysis of samples from an outbreak in a remote area of Cameroon. This method will facilitate the understanding of the molecular epidemiology in cholera-prone areas, which were previously too challenging to attempt. It also introduces a method that can be used on a broader scale for diarrheal disease surveillance, including providing a window into co-infection and microbiome analyses.

We describe herein a method of recharging used commercial spin columns or assembling homemade spin columns using filter paper as binding material for cost-effective, low throughput nucleic acid purification. The efficiency of filter paper-based spin columns was evaluated for purification of nucleic acids from various sources. Following protocols of commercial kits, we found filter paper to be a useful binding material for purification of nucleic acids, including plant genomic DNA, plant total RNA, PCR products, and DNA from agarose gels. However, filter paper has a weak binding affinity to plasmid DNA in tested miniprep protocols. Protocols for the use of filter paper recharged spin columns or homemade spin columns for low throughput purification of plant genomic DNA and total RNA with unused commercial kit buffers or less expensive homemade buffers are presented.

Although regression models play a central role in the analysis of medical research projects, there still exist many misconceptions on various aspects of modeling leading to faulty analyses. Indeed, the rapidly developing statistical methodology and its recent advances in regression modeling do not seem to be adequately reflected in many medical publications. This problem of knowledge transfer from statistical research to application was identified by some medical journals, which have published series of statistical tutorials and (shorter) papers mainly addressing medical researchers. The aim of this review was to assess the current level of knowledge with regard to regression modeling contained in such statistical papers. We searched for target series by a request to international statistical experts. We identified 23 series including 57 topic-relevant articles. Within each article, two independent raters analyzed the content by investigating 44 predefined aspects on regression modeling. We assessed to what extent the aspects were explained and if examples, software advices, and recommendations for or against specific methods were given. Most series (21/23) included at least one article on multivariable regression. Logistic regression was the most frequently described regression type (19/23), followed by linear regression (18/23), Cox regression and survival models (12/23) and Poisson regression (3/23). Most general aspects on regression modeling, e.g. model assumptions, reporting and interpretation of regression results, were covered. We did not find many misconceptions or misleading recommendations, but we identified relevant gaps, in particular with respect to addressing nonlinear effects of continuous predictors, model specification and variable selection. Specific recommendations on software were rarely given. Statistical guidance should be developed for nonlinear effects, model specification and variable selection to better support medical researchers who perform or interpret regression analyses.

Amphimeriasis, a fish-borne zoonotic disease caused by the liver fluke Amphimerus spp., has recently been reported as an emerging disease affecting an indigenous Ameridian group, the Chachi, living in Ecuador. The only method for diagnosing amphimeriasis was the microscopic detection of eggs from the parasite in patients' stool samples with very low sensitivity. Our group developed an ELISA technique for detection of anti-Amphimerus IgG in human sera and a molecular method based on LAMP technology (named LAMPhimerus) for specific and sensitive parasite DNA detection. The LAMPhimerus method showed to be much more sensitive than classical parasitological methods for amphimeriasis diagnosis using human stool samples for analysis. The objective of this work is to demonstrate the feasibility of using dried stool samples on filter paper as source of DNA in combination with the effectiveness of our previously designed LAMPhimerus assay for successfully Amphimerus sp. detection in clinical stool samples. A total of 102 untreated and undiluted stool samples collected from Chachi population were spread as thin layer onto common filter paper for easily transportation to our laboratory and stored at room temperature for one year until DNA extraction. When LAMPhimerus method was applied for Amphimerus sp. DNA detection, a higher number of positive results was detected (61/102; 59.80%) in comparison to parasitological methods (38/102; 37.25%), including 28/61 (45.90%) microscopy-confirmed Amphimerus sp. infections. The diagnostic parameters for the sensitivity and specificity werecalculated for our LAMPhimerus assay, which were 79.17% and 65.98%, respectively. We demonstrate, for the first time, that common filter paper is useful for easy collection and long-term storage of human stool samples for later DNA extraction and molecular analysis of human-parasitic trematode eggs. This simple, economic and easily handling method combined with the specific and sensible LAMPhimerus assay has the potential to beused as an effective molecular large-scale screening test for amphimeriasis-endemic areas.

The present work was focused to design a cheap, rapid, portable and easy to use filter paper based assay for the qualitative and quantitate analysis of acetone. Sodium alginate gel was loaded with the acetone specific optical signal probe, and subsequently coated onto filter paper surface to design portable colorimetric assays for acetone monitoring. The color of the paper sensor strip was observed to change from dark yellow to light yellowish in the presence of varying concentrations of acetone. Three different color analyzing models including RGB, HSV, and LAB were employed to probe the output optical signal, and their performance was compared in terms of better interpretation of the generated signal. The LAB model was found to provide better analytical figures of merit with a linear response for the acetone concentration ranging from 2.5 to 1500 ppm, and a limit of detection of 0.5 ppm. Furthermore, the specificity of the designed filter paper based sensor was demonstrated against different common interfering compounds. The results demonstrated the potential of our proposed filter paper based sensor as a novel tool for the analysis of acetone.

Introduction \ud Data collection using paper-based questionnaires can be time consuming and return errors affect data accuracy, completeness, and information quality in health surveys. We compared smartphone and paper-based data collection systems in the Burden of Obstructive Lung Disease (BOLD) study in rural Sudan. \ud Methods \ud This exploratory pilot study was designed to run in parallel with the cross-sectional household survey. The Open Data Kit was used to programme questionnaires in Arabic into smartphones. We included 100 study participants (83% women; median age = 41.5 ± 16.4 years) from the BOLD study from 3 rural villages in East-Gezira and Kamleen localities of Gezira state, Sudan. Questionnaire data were collected using smartphone and paper-based technologies simultaneously. We used Kappa statistics and inter-rater class coefficient to test agreement between the two methods. Results Symptoms reported included cough (24%), phlegm (15%), wheezing (17%), and shortness of breath (18%). One in five were or had been cigarette smokers. The two data collection methods varied between perfect to slight agreement across the 204 variables evaluated (Kappa varied between 1.00 and 0.02 and inter-rater coefficient between 1.00 and -0.12). Errors were most commonly seen with paper questionnaires (83% of errors seen) vs smartphones (17% of errors seen) administered questionnaires with questions with complex skip-patterns being a major source of errors in paper questionnaires. Automated checks and validations in smartphone-administered questionnaires avoided skip-pattern related errors. Incomplete and inconsistent records were more likely seen on paper questionnaires. \ud Conclusion \ud Compared to paper-based data collection, smartphone technology worked well for data collection in the study, which was conducted in a challenging rural environment in Sudan. This approach provided timely, quality data with fewer errors and inconsistencies compared to paper-based data collection. We recommend this method for future BOLD studies and other population-based studies in similar settings.

International audience; Background: Identification of the source of mosquito blood meals is an important component for disease control and surveillance. Recently, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) profiling has emerged as an effective tool for mosquito blood meal identification, using the abdomens of freshly engorged mosquitoes. In the field, mosquito abdomens are crushed on Whatman filter papers to determine the host feeding patterns by identifying the origin of their blood meals. The aim of this study was to test whether crushing engorged mosquito abdomens on Whatman filter papers was compatible with MALDI-TOF MS for mosquito blood meal identification. Both laboratory reared and field collected mosquitoes were tested.Material and methods: Sixty Anopheles gambiae Giles were experimentally engorged on the blood of six distinct vertebrate hosts (human, sheep, rabbit, dog, chicken and rat). The engorged mosquito abdomens were crushed on Whatman filter papers for MALDI-TOF MS analysis. 150 Whatman filter papers, with mosquitoes engorged on cow and goat blood, were preserved. A total of 77 engorged mosquito abdomens collected in the Comoros Islands and crushed on Whatman filter papers were tested with MALDI-TOF MS. Results The MS profiles generated from mosquito engorged abdomens crushed on Whatman filter papers exhibited high reproducibility according to the original host blood. The blood meal host was correctly identified from mosquito abdomens crushed on Whatman filter papers by MALDI-TOF MS. The MS spectra obtained after storage were stable regardless of the room temperature and whether or not they were frozen. The MS profiles were reproducible for up to three months. For the Comoros samples, 70/77 quality MS spectra were obtained and matched with human blood spectra. This was confirmed by molecular tools.Conclusion: The results demonstrated that MALDI-TOF MS could identify mosquito blood meals from Whatman filter papers collected in the field during entomological surveys. The application of MALDI-TOF MS has proved to be rapid and successful, making it a new and efficient tool for mosquito-borne disease surveillance.

BACKGROUND The lack of information regarding the burden of acute bacterial meningitis in Latin America leads to a reduction in the estimated incidence rates of the disease, and impairs public health decisions on the use and follow-up of preventive interventions, particularly, the evaluation of existing vaccination policies. The use of the real-time PCR in diagnostic routine procedures has resulted in a substantial increase in confirmed bacterial meningitis cases. However, in resource-poor countries, these assays are only available in reference laboratories. Sample transportation to these laboratories is a critical constraint, as it requires specialized, high cost courier services. To overcome this barrier we evaluated the use of FTATM Elute filter paper cards for the conservation and processing of samples under normal environmental conditions, as they would be when transported from remote and under-equipped healthcare facilities to the reference centers. A total of 401 samples received in 2015 as part of Sao Paulo's national surveillance for routine diagnosis were selected for this study. METHODS The sensitivity and specificity of real-time PCR were evaluated using fresh serum and cerebrospinal fluid (CSF) samples processed using our laboratory's standard DNA extraction, and processing the same samples after being dried and stored on FTATM card, and DNA extracted following the manufacturer's instructions. RESULTS The sensitivities for detection of Neisseria meningitidis, Streptococcus pneumoniae, and Haemophilus influenzae from CSF dried and stored on FTATM cards were 98%, 92%, and 100%, respectively, and with serum samples were 73%, 88%, and 100%, respectively. When compared to our laboratory's standard methodology, results showed high concordance, with Kappa index ranges of 0.9877-1.00 for CSF, and 0.8004-1.00 for serum samples. CONCLUSION The use of FTATM cards for CSF and serum conservation and transport represents a rapid, reliable, and cost-effective alternative that will allow obtaining valuable epidemiological information that would otherwise be lost.

ObjectivesRecently, the results of two economic evaluations were published both of which seemingly demonstrate the cost-effectiveness of sofosbuvir-based regimens for the treatment of chronic hepatitis C genotype 1 infection in Germany. Both analyses were sponsored by the manufacturer of sofosbuvir and use a different methodology: Whereas one evaluation is based on a conventional cost-utility analysis, the other rests upon the efficiency-frontier method used by the German Institute for Quality and Efficiency in Health Care (IQWiG). The purpose of this study is to reanalysis the results of both economic evaluations in combination.DesignReanalysis of published decision modelling results.SettingPrimary care in Germany.ParticipantsPatients with chronic hepatitis C genotype 1 infection (treatment-naïve and -experienced, cirrhotic and non-cirrhotic).InterventionsSofosbuvir, other anti-hepatitis C virus drugs, and no treatment.Primary and secondary outcome measuresCost per unit of health benefit and cost per quality-adjusted life year.ResultsReanalysis of the results of both economic evaluations in combination reveals an unclear rationale for choosing the selected cost-effectiveness methods as well as a potential publication bias, favoring the product of the manufacturer. Based on the reanalysis, sofosbuvir is not cost-effective in treatment-experienced non-cirrhotic patients, potentially lacks cost-effectiveness in treatment-experienced cirrhotic patients, and is only partially cost-effective in treatment-naïve non-cirrhotic patients. Taken together, these results indicate a lack of cost-effectiveness in three quarters of the German patient population.ConclusionsTwo economic evaluations on sofosbuvir suggest, in combination, that sofosbuvir cannot be considered a cost-effective treatment in three quarters of the German patient population.

Background The use of filter paper as a simple, inexpensive tool for storage and transportation of blood, ‘Dried Blood Spots’ or Guthrie cards, for diagnostic assays is well-established. In contrast, there are a paucity of diagnostic evaluations of dried cerebrospinal fluid (CSF) spots. These have potential applications in low-resource settings, such as Laos, where laboratory facilities for central nervous system (CNS) diagnostics are only available in Vientiane. In Laos, a major cause of CNS infection is Japanese encephalitis virus (JEV). We aimed to develop a dried CSF spot protocol and to evaluate its diagnostic performance using the World Health Organisation recommended anti-JEV IgM antibody capture enzyme-linked immunosorbent assay (JEV MAC-ELISA). Methodology and Principal Findings Sample volumes, spotting techniques and filter paper type were evaluated using a CSF-substitute of anti-JEV IgM positive serum diluted in Phosphate Buffer Solution (PBS) to end-limits of detection by JEV MAC-ELISA. A conventional protocol, involving eluting one paper punch in 200μl PBS, did not detect the end-dilution, nor did multiple punches utilising diverse spotting techniques. However, pre-cut filter paper enabled saturation with five times the volume of CSF-substitute, sufficiently improving sensitivity to detect the end-dilution. The diagnostic accuracy of this optimised protocol was compared with routine, neat CSF in a pilot, retrospective study of JEV MAC-ELISA on consecutive CSF samples, collected 2009–15, from three Lao hospitals. In comparison to neat CSF, 132 CSF samples stored as dried CSF spots for one month at 25–30°C showed 81.6% (65.7–92.3 95%CI) positive agreement, 96.8% (91.0–99.3 95%CI) negative agreement, with a kappa coefficient of 0.81 (0.70–0.92 95%CI). Conclusions/Significance The novel design of pre-cut filter paper saturated with CSF could provide a useful tool for JEV diagnostics in settings with limited laboratory access. It has the potential to improve national JEV surveillance and inform vaccination policies. The saturation of filter paper has potential use in the wider context of pathogen detection, including dried spots for detecting other analytes in CSF, and other body fluids., Author Summary Japanese encephalitis virus infection is widespread in Asia, and primarily affects children in poor, rural areas. The virus spreads to the brain and spinal cord resulting in significant death and disability. Diagnosis requires testing for the immune response ‘antibody’ specific to Japanese encephalitis virus in the cerebrospinal fluid that surrounds the brain and spinal cord. However, in most areas where the infection occurs there are no laboratory facilities. In the absence of laboratory diagnosis, we have poor knowledge of the extent of the problem in these areas. Dried blood spots on filter paper have been used widely for many years as simple, cost-effective tools for transporting samples for testing. However, there have been few attempts at using dried cerebrospinal fluid spots. We developed a technique for using dried spots to store and test cerebrospinal fluid for antibodies to Japanese encephalitis virus. We compared the results of dried spots with routine neat cerebrospinal fluid in 132 patient samples, and demonstrated excellent agreement between the two tests. This novel method for saturating dried cerebrospinal fluid spots has the potential to enhance our knowledge of Japanese encephalitis virus epidemiology, and inform health policies where they are most needed. It could also be transferred for use in diagnosing other infectious diseases, including using other body fluid samples.

University scientific research ability is an important indicator to express the strength of universities. In this paper, the evaluation of university scientific research ability is investigated based on the output of sci-tech papers. Four university alliances from North America, UK, Australia, and China, are selected as the case study of the university scientific research evaluation. Data coming from Thomson Reuters InCites are collected to support the evaluation. The work has contributed new framework to the issue of university scientific research ability evaluation. At first, we have established a hierarchical structure to show the factors that impact the evaluation of university scientific research ability. Then, a new MCDM method called D-AHP model is used to implement the evaluation and ranking of different university alliances, in which a data-driven approach is proposed to automatically generate the D numbers preference relations. Next, a sensitivity analysis has been given to show the impact of weights of factors and sub-factors on the evaluation result. At last, the results obtained by using different methods are compared and discussed to verify the effectiveness and reasonability of this study, and some suggestions are given to promote China’s scientific research ability.

Authorship on peer-reviewed journal articles and abstracts has become the main currency and reward unit in academia. Such a reward has become a crucial component for students and postdocs who are often under-compensated and thus value authorship as their primary reward mechanism. While numerous scientific and publishing organizations have attempted to write guidelines for defining who gets to be an author and what rank they should be listed in, there remains much ambiguity when it comes to how the various criteria are weighed by research faculty. Here we sought to quantify the relative importance of each of the 11 criteria we defined as being significant contributions for scientific authorship. We sent out an anonymous survey to approximately 564 faculty members at ten different research institutions across the United States. The faculty were from the biomedical engineering, biology, and bioengineering departments. The response rate was approximately 18% with a final sample size of 102 faculty members. We found that there was a consensus on some criteria as being crucial, such as time spent conducting experiments, but there was a lack of consensus regarding the role of obtaining funding. This study provides one of the first quantitative assessments of how faculty members in the biomedical sciences evaluated these 11 authorship criteria. We believe researchers will find this insightful and will narrow down the disparity between what they assume as being important and what faculty value. This understanding will also bring us closer to establishing a more standardized system for determining authorship and rank in the biosciences.

Rapid diagnosis by using small, simple, and portable devices could represent one of the best strategies to limit the damage and contain the spread of viral, bacterial or protozoa diseases, principally when they can be transmitted by air and are highly contagious, as some respiratory viruses are. The presence of antibodies in blood or serum samples is not the best option for deciding when a person must be quarantined to stop transmission of disease, given that cured patients have antibodies, so the best diagnosis methods rely on the use of nucleic acid amplification procedures. Here we present a very simple device and detection principle, based on paper discs coupled to contactless conductivity (C4D) sensors, can provide fast and easy diagnostics that are needed when an epidemic outbreak develops. The paper device presented here solves one of the main drawbacks that nucleic acid amplification tests have when they are performed outside of central laboratories. As the device is sealed before amplification and integrally disposed in this way, amplimers release cannot occur, allowing repetitive testing in the physician’s practice, ambulances, or other places that are not prepared to avoid cross-contamination of new samples. The use of very low volume samples allows efficient reagent use and the development of low cost, simple, and disposable point-of-care diagnostic systems., Author summary In 2005, the World Health Organization (WHO) recognized Chagas Disease as a neglected tropical disease. Meanwhile the serological tests, recommended by WHO, can be performed for chronic disease diagnosis, the nucleic acid amplification tests must be performed for the detection of the acute phase of the disease. Although the existing laboratory diagnosis tests for Chagas Disease are sensitive and highly reproducible, they cannot be performed in rural, low infrastructure environments, where this disease prevails. In this sense, the use of simple and portable analytical devices may be able to offer an affordable solution to this problem, allowing fast sampling, diagnosis and treatment prescription in one simple and fast intervention, as the performed by short term medical missions. In this study we show for the first time a diagnosis test comprising low cost materials and employing a contactless and label-free conductivity detection system that is used to read the result of a nucleic acid amplification reaction. The test showed high sensitivity for Chagas Disease diagnosis showing the potential to be used in rural and low income places.

Environmental DNA (eDNA) analysis has gained traction as a precise and cost-effective method for species and waterways management. To date, publications on eDNA protocol optimization have focused primarily on DNA yield. Therefore, it has not been possible to evaluate the cost and speed of specific components of the eDNA protocol, such as water filtration and DNA extraction method when designing or choosing an eDNA protocol. At the same time, these two parameters are essential for the experimental design of a project. Here we evaluate and rank 27 different eDNA protocols in the context of Chinook salmon (Oncorhynchus tshawytscha) eDNA detection in an estuarine environment. We present a comprehensive evaluation of multiple eDNA protocol parameters, balancing time, cost and DNA yield. We collected samples composed of 500 mL estuarine water from Deverton Slough (38°11'16.7"N 121°58'34.5"W) and 500 mL from tank water containing 1.3 juvenile Chinook Salmon per liter. Then, we compared extraction methods, filter types, use of inhibitor removal kit for DNA yield, processing time, and protocol cost. Lastly, we used an MCMC algorithm together with machine learning to understand the DNA yield of each step of the protocol as well as the interactions between those steps. Glass fiber filtration was to be the most resilient to high turbidites, filtering the samples in 2.32 ± 0.08 min instead of 14.16 ± 1.86 min and 6.72 ± 1.99 min for nitrocellulose and paper filter N1, respectively. The filtration DNA yield percentages for paper filter N1, glass fiber, and nitrocellulose were 0.00045 ± 0.00013, 0.00107 ± 0.00013, 0.00172 ± 0.00013. The DNA extraction yield percentage for QIagen, dipstick, NaOH, magnetic beads, and direct dipstick ranged from 0.047 ± 0.0388 to 0.475 ± 0.0357. For estuarine waters, which are challenging for eDNA studies due to high turbidity, variable salinity, and the presence of PCR inhibitors, we found that a protocol combining glass filters, magnetic beads, and an extra step for PCR inhibitor removal, is the method that best balances time, cost, and yield. In addition, we provide a generalized decision tree for determining the optimal eDNA protocol for other studies in aquatic systems. Our findings should be applicable to most aquatic environments and provide a clear guide for determining which eDNA protocol should be used under different study constraints.

Many microbial phenotypes are differentially or exclusively expressed on agar surfaces, including biofilms, motility, and sociality. However, agar-based assays are limited by their low throughput, which increases costs, lab waste, space requirements, and the time required to conduct experiments. Here, we demonstrate the use of wax-printed microfluidic paper-based analytical devices (μPADs) to measure linear growth rate of microbes on an agar growth media as a means of circumventing the aforementioned limitations. The main production materials of the proposed μPAD design are a wax printer, filter paper, and empty pipet boxes. A single wax-printed μPAD allowing 8 independent, agar-grown colonies costs $0.07, compared to $0.20 and $9.37 for the same number of replicates on traditional microtiter/spectrophotometry and Petri dish assays, respectively. We optimized the μPAD design for channel width (3 mm), agar volume (780 μL/channel), and microbe inoculation method (razor-blade). Comparative analyses of the traditional and proposed μPAD methods for measuring growth rate of nonmotile (Saccharomyces cerevisiae) and motile (flagellated Escherichia coli) microorganisms suggested the μPAD assays conferred a comparable degree of accuracy and reliability to growth rate measurements as their traditional counterparts. We substantiated this claim with strong, positive correlations between the traditional and μPAD assay, a significant nonzero slope in the model relating the two assays, a nonsignificant difference between the relative standard errors of the two techniques, and an analysis of inter-device reliability. Therefore, μPAD designs merit consideration for the development of enhanced-throughput, low-cost microbial growth and motility assays.

Fiber release during domestic textile washing is a cause of marine microplastic pollution, but better understanding of the magnitude of the issue and role of fabric care products, appliances and washing cycles is needed. Soiled consumer wash loads from U.K. households were found to release a mean of 114 ± 66.8 ppm (mg microfiber per kg fabric) (n = 79) fibers during typical washing conditions and these were mainly composed of natural fibers. Microfiber release decreased with increasing wash load size and hence decreasing water to fabric ratio, with mean microfiber release from wash loads in the mass range 1.0-3.5 kg (n = 57) found to be 132.4 ± 68.6 ppm, significantly (p = 3.3 x 10-8) higher than the 66.3 ± 27.0 ppm of those in the 3.5-6.0 kg range (n = 22). In further tests with similar soiled consumer wash loads, moving to colder and quicker washing cycles (i.e. 15°C for 30 mins, as opposed to 40°C for 85 mins) significantly reduced microfiber generation by 30% (p = 0.036) and reduced whiteness loss by 42% (p = 0.000) through reduced dye transfer and soil re-deposition, compared to conventional 40°C cycles. In multicycle technical testing, detergent pods were selected for investigation and found to have no impact on microfiber release compared to washing in water alone. Fabric softeners were also found to have no direct impact on microfiber release in testing under both European and North American washing conditions. Extended testing of polyester fleece garments up to a 48-wash cycle history under European conditions found that microfiber release significantly reduced to a consistent low level of 28.7 ± 10.9 ppm from eight through 64 washes. Emerging North American High-Efficiency top-loading washing machines generated significantly lower microfiber release than traditional top-loading machines, likely due to their lower water fill volumes and hence lower water to fabric ratio, with a 69.7% reduction observed for polyester fleece (n = 32, p = 7.9 x 10-6) and 37.4% reduction for polyester T-shirt (n = 32, p = 0.0032). These results conclude that consumers can directly reduce the levels of microfibers generated per wash during domestic textile washing by using colder and quicker wash cycles, washing complete (but not overfilled) loads, and (in North America) converting to High-Efficiency washing machines. Moving to colder and quicker cycles will also indirectly reduce microfiber release by extending the lifetime of clothing, leading to fewer new garments being purchased and hence lower incidence of the high microfiber release occurring during the first few washes of a new item.

Phytoseiids are predatory mites that prey on other mites and small arthropods, and several species are used in commercial agriculture for biological control of pests. To optimize phytoseiid mites' use in biocontrol, an efficient method for oral delivery of test compounds is required to assess their sensitivities to pesticides, RNAi for gene functional analysis and artificial diets. Here we developed four methods for oral delivery of a solution of xenobiotics to different life stages of the commercially available generalist predatory mite Neoseiulus californicus: (i) soaking mites in the solution, or allowing them to feed on (ii) spider mites soaked in the solution, (iii) a solution droplet, or (iv) solution-saturated filter paper. As measured by ingestion of a tracer dye, the droplet-based feeding system was most efficient; the dye was observed in the alimentary canal of >90% test mites of all life stages, with no mortality. The droplet-based feeding system was also effective for the commercially available specialist predatory mite Phytoseiulus persimilis, with >80% delivery efficiency. This study paves the way for development of methods for high-throughput RNAi and for toxicological or nutritional assays in phytoseiid mites.

The objective of this study is to verify the feasibility of using biochar made from crop straw as a bitumen additive to improve some properties of bitumen. The differences between crop straw biochar prepared in a laboratory and commercial charcoal were investigated through scanning electron microscopy and laser particle size analyses. Furthermore, biochar-modified asphalt was prepared using the high-speed shear method, and the penetration, softening point, ductility at 15°C, and apparent viscosity of the asphalt binder with 6% biochar were measured at 120, 135, 150, 160, and 175°C. It was found that both the crop straw biochar and the commercial charcoal consist mainly of C, O, Si, and K, but the C content of crop straw biochar is slightly higher than that of commercial charcoal. The particle size of biochar is smaller than that of commercial charcoal, while the specific surface area is larger. It was determined that the addition of crop straw biochar significantly improved the high-temperature performance of asphalt, and that biochar and commercial charcoal have a similar influence on the high temperature performance of asphalt.

A synthetic microbial consortium called Effective Microorganisms (EM) consists mainly of photosynthetic bacteria, lactic acid bacteria and yeast. Various effects of EM∙XGOLD, a health drink produced by EM, on life cycle of Dictyostelium discoideum were described previously. Here, we report our attempt to identify the active principle, termed EMF, that brought about the observed effects. Throughout the purification processes, the presence of the active principle was monitored by promoted fruiting body formation. By liquid-liquid separation the activity was recovered in aqueous phase, which, after concentration, was further subjected to reverse-phase column chromatography. No activity was detected in any eluant, while almost all the activity was recovered in residual insoluble material. The application of conventional organic chemistry procedures to the residual fraction did not lead to any informative results. Acid treatment of the insoluble material produced air bubbles, suggesting it to be composed of some inorganic carbonate. Viewed under scanning electronmicroscope, the residue revealed spherical particles of μm size range. Energy Dispersive X-ray (EDX) Spectroscopy pointed to the existence, on the surface of the particles, of magnesium and, to a certain extent, of potassium. In separate experiments, acid treatment and alkali neutralization of EM∙XGOLD completely wiped out the stimulatory activity of fruiting body formation. These lines of evidence indicate these Mg, K-containing microparticles to be an active principle of EM culture extract. How these particles exert their effect is currently under intensive investigation.

Annually, agricultural activity produces an enormous amount of plant biomass by-product. Many studies have reported the biomethane potential of agro-industrial wastes, but only a few studies have investigated applying the substrates in both batch and continuous mode. Tomato is one of the most popular vegetables globally; its processing releases a substantial amount of by-product, such as stems and leaves. This study examined the BMP of tomato plant (Solanum lycopersicum Mill. L. cv. Alfred) waste. A comparative test revealed that the BMPs of corn stover, tomato waste,and their combination were approximately the same, around 280 mL methane/g Volatile Solid. In contrast, the relative biogas production decreased in the presence of tomato waste in a continuous mesophilic anaerobic digestion system; the daily biogas productions were 860 ± 80, 290 ± 50, and 570 ± 70 mL biogas/gVolatile Solid/day in the case of corn stover, tomato waste, and their mixture, respectively. The methane content of biogas was around 46–48%. The fermentation parameters of the continuous AD experiments were optimal in all cases; thus, TW might have an inhibitory effect on the microbial community. Tomato plant materials contain e.g. flavonoids, glycoalkaloids (such as tomatine and tomatidine), etc. known as antimicrobial and antifungal agents. The negative effect of tomatine on the biogas yield was confirmed in batch fermentation experiments. Metagenomic analysis revealed that the tomato plant waste caused significant rearrangements in the microbial communities in the continuously operated reactors. The results demonstrated that tomato waste could be a good mono-substrate in batch fermentations or a co-substrate with corn stover in a proper ratio in continuous anaerobic fermentations for biogas production. These results also point to the importance of running long-term continuous fermentations to test the suitability of a novel biomass substrate for industrial biogas production.

Despite the development of effective vaccines against SARS-CoV-2, epidemiological control of the virus is still challenging due to slow vaccine rollouts, incomplete vaccine protection to current and emerging variants, and unwillingness to get vaccinated. Therefore, frequent testing of individuals to identify early SARS-CoV-2 infections, contact-tracing and isolation strategies remain crucial to mitigate viral spread. Here, we describe WHotLAMP, a rapid molecular test to detect SARS-CoV-2 in saliva. WHotLAMP is simple to use, highly sensitive (3.6 viral RNA copies per microliter of saliva) and specific, as well as inexpensive, making it ideal for frequent screening. Moreover, WHotLAMP does not require toxic chemicals or specialized equipment and thus can be performed in point-of-care settings, and may also be adapted for resource-limited environments or home use. While applied here to SARS-CoV-2, WHotLAMP can be modified to detect other pathogens, making it adaptable for other diagnostic assays, including for use in future outbreaks.