Search

We describe herein a method of recharging used commercial spin columns or assembling homemade spin columns using filter paper as binding material for cost-effective, low throughput nucleic acid purification. The efficiency of filter paper-based spin columns was evaluated for purification of nucleic acids from various sources. Following protocols of commercial kits, we found filter paper to be a useful binding material for purification of nucleic acids, including plant genomic DNA, plant total RNA, PCR products, and DNA from agarose gels. However, filter paper has a weak binding affinity to plasmid DNA in tested miniprep protocols. Protocols for the use of filter paper recharged spin columns or homemade spin columns for low throughput purification of plant genomic DNA and total RNA with unused commercial kit buffers or less expensive homemade buffers are presented. [ABSTRACT FROM AUTHOR]

The cost of specialized scientific equipment can be high and with limited funding resources, researchers and students are often unable to access or purchase the ideal equipment for their projects. In the fields of materials science and mechanical engineering, fundamental equipment such as tensile testing devices can cost tens to hundreds of thousands of dollars. While a research lab often has access to a large-scale testing machine suitable for conventional samples, loading devices for meso- and micro-scale samples for in-situ testing with the myriad of microscopy tools are often hard to source and cost prohibitive. Open-source software has allowed for great strides in the reduction of costs associated with software development and open-source hardware and additive manufacturing have the potential to similarly reduce the costs of scientific equipment and increase the accessibility of scientific research. To investigate the feasibility of open-source hardware, a micro-tensile tester was designed with a freely accessible computer-aided design package and manufactured with a desktop 3D-printer and off-the-shelf components. To our knowledge this is one of the first demonstrations of a tensile tester with additively manufactured components for scientific research. The capabilities of the tensile tester were demonstrated by investigating the mechanical properties of Graphene Oxide (GO) paper and thin films. A 3D printed tensile tester was successfully used in conjunction with an atomic force microscope to provide one of the first quantitative measurements of GO thin film buckling under compression. The tensile tester was also used in conjunction with an atomic force microscope to observe the change in surface topology of a GO paper in response to increasing tensile strain. No significant change in surface topology was observed in contrast to prior hypotheses from the literature. Based on this result obtained with the new open source tensile stage we propose an alternative hypothesis we term ‘superlamellae consolidation’ to explain the initial deformation of GO paper. The additively manufactured tensile tester tested represents cost savings of >99% compared to commercial solutions in its class and offers simple customization. However, continued development is needed for the tensile tester presented here to approach the technical specifications achievable with commercial solutions. [ABSTRACT FROM AUTHOR]

The present work was focused to design a cheap, rapid, portable and easy to use filter paper based assay for the qualitative and quantitate analysis of acetone. Sodium alginate gel was loaded with the acetone specific optical signal probe, and subsequently coated onto filter paper surface to design portable colorimetric assays for acetone monitoring. The color of the paper sensor strip was observed to change from dark yellow to light yellowish in the presence of varying concentrations of acetone. Three different color analyzing models including RGB, HSV, and LAB were employed to probe the output optical signal, and their performance was compared in terms of better interpretation of the generated signal. The LAB model was found to provide better analytical figures of merit with a linear response for the acetone concentration ranging from 2.5 to 1500 ppm, and a limit of detection of 0.5 ppm. Furthermore, the specificity of the designed filter paper based sensor was demonstrated against different common interfering compounds. The results demonstrated the potential of our proposed filter paper based sensor as a novel tool for the analysis of acetone. [ABSTRACT FROM AUTHOR]

Microbial fuel cells (MFCs) can evolve in a viable technology if environmentally sound materials are developed and became available at low cost for these devices. This is especially important not only for the designing of large wastewater treatment systems, but also for the fabrication of low-cost, single-use devices. In this work we synthesized membranes by a simple procedure involving easily-biodegradable and economic materials such as poly (vinyl alcohol) (PVA), chitosan (CS) and the composite PVA:CS. Membranes were chemical and physically characterized and compared to Nafion®. Performance was studied using the membrane as separator in a typical H-Type MFCs showing that PVA:CS membrane outperform Nafion® 4 times (power production) while being 75 times more economic. We found that performance in MFC depends over interactions among several membrane characteristics such as oxygen permeability and ion conductivity. Moreover, we design a paper-based micro-scale MFC, which was used as a toxicity assay using 16 μL samples containing formaldehyde as a model toxicant. The PVA:CS membrane presented here can offer low environmental impact and become a very interesting option for point of need single-use analytical devices, especially in low-income countries where burning is used as disposal method, and toxic fluoride fumes (from Nafion®) can be released to the environment. [ABSTRACT FROM AUTHOR]

In order to reduce the ecotoxicity of paper mill, four different enzymatic pretreatment strategies were investigated in comparison to conventional chemical based processes. In strategy I, xylanase-aided pretreatment of pulp was carried out, and in strategy II, xylanase and laccase-mediator systems were used sequentially. Moreover, to compare the efficiency of Bacillus stearothermophilus xylanase and Ceriporiopsis subvermispora laccase in the reduction of ecotoxicity and pollution, parallel strategies (III and IV) were implemented using commercial enzymes. Conventional CDEOPD1D2 (CD, Cl2 with ClO2; EOP, H2O2 extraction; D1 and D2, ClO2) and X/XLCDEOPD1D2 (X, xylanase; L, laccase) sequences were employed with non-enzymatic and enzymatic strategies, respectively. Acute toxicity was determined by the extent of inhibition of bioluminescence of Vibrio fischeri with different dilutions of the effluent. Two-fold increase was observed in EC50 values for strategy I compared to the control process. On the other hand, sequential application of commercial enzymes resulted in higher acute toxicity compared to lab enzymes. In comparison to the control process, strategy II was the most efficient and successfully reduced 60.1 and 25.8% of biological oxygen demand (BOD) and color of effluents, respectively. We report for the first time the comparative analysis of the ecotoxicity of industrial effluents. [ABSTRACT FROM AUTHOR]

Biosensors have emerged as a valuable tool with high specificity and sensitivity for fast and reliable detection of hazardous substances in drinking water. Numerous substances have been addressed using synthetic biology approaches. However, many proposed biosensors are based on living, genetically modified organisms and are therefore limited in shelf life, usability and biosafety. We addressed these issues by the construction of an extensible, cell-free biosensor. Storage is possible through freeze drying on paper. Following the addition of an aqueous sample, a highly efficient cell-free protein synthesis (CFPS) reaction is initiated. Specific allosteric transcription factors modulate the expression of ‘superfolder’ green fluorescent protein (sfGFP) depending on the presence of the substance of interest. The resulting fluorescence intensities are analyzed with a conventional smartphone accompanied by simple and cheap light filters. An ordinary differential equitation (ODE) model of the biosensors was developed, which enabled prediction and optimization of performance. With an optimized cell-free biosensor based on the Shigella flexneri MerR transcriptional activator, detection of 6 μg/L Hg(II) ions in water was achieved. Furthermore, a completely new biosensor for the detection of gamma-hydroxybutyrate (GHB), a substance used as date-rape drug, was established by employing the naturally occurring transcriptional repressor BlcR from Agrobacterium tumefaciens. [ABSTRACT FROM AUTHOR]

In this paper, we present a facile and cost-effective method to obtain superhydrophobic filter paper and demonstrate its application for efficient water/oil separation. By coupling structurally distinct organosilane precursors (e.g., octadecyltrichlorosilane and methyltrichlorosilane) to paper fibers under controlled reaction conditions, we have formulated a simple, inexpensive, and efficient protocol to achieve a desirable superhydrophobic and superoleophilic surface on conventional filter paper. The silanized superhydrophobic filter paper showed nanostructured morphology and demonstrated great separation efficiency (up to 99.4%) for water/oil mixtures. The modified filter paper is stable in both aqueous solutions and organic solvents, and can be reused multiple times. The present study shows that our newly developed binary silanization is a promising method of modifying cellulose-based materials for practical applications, in particular the treatment of industrial waste water and ecosystem recovery. [ABSTRACT FROM AUTHOR]

Background: The lack of information regarding the burden of acute bacterial meningitis in Latin America leads to a reduction in the estimated incidence rates of the disease, and impairs public health decisions on the use and follow-up of preventive interventions, particularly, the evaluation of existing vaccination policies. The use of the real-time PCR in diagnostic routine procedures has resulted in a substantial increase in confirmed bacterial meningitis cases. However, in resource-poor countries, these assays are only available in reference laboratories. Sample transportation to these laboratories is a critical constraint, as it requires specialized, high cost courier services. To overcome this barrier we evaluated the use of FTATM Elute filter paper cards for the conservation and processing of samples under normal environmental conditions, as they would be when transported from remote and under-equipped healthcare facilities to the reference centers. A total of 401 samples received in 2015 as part of Sao Paulo’s national surveillance for routine diagnosis were selected for this study. Methods: The sensitivity and specificity of real-time PCR were evaluated using fresh serum and cerebrospinal fluid (CSF) samples processed using our laboratory’s standard DNA extraction, and processing the same samples after being dried and stored on FTATM card, and DNA extracted following the manufacturer’s instructions. Results: The sensitivities for detection of Neisseria meningitidis, Streptococcus pneumoniae, and Haemophilus influenzae from CSF dried and stored on FTATM cards were 98%, 92%, and 100%, respectively, and with serum samples were 73%, 88%, and 100%, respectively. When compared to our laboratory’s standard methodology, results showed high concordance, with Kappa index ranges of 0.9877–1.00 for CSF, and 0.8004–1.00 for serum samples. Conclusion: The use of FTATM cards for CSF and serum conservation and transport represents a rapid, reliable, and cost-effective alternative that will allow obtaining valuable epidemiological information that would otherwise be lost. [ABSTRACT FROM AUTHOR]

Here we describe an ultra-low-cost origami-based approach for large-scale manufacturing of microscopes, specifically demonstrating brightfield, darkfield, and fluorescence microscopes. Merging principles of optical design with origami enables high-volume fabrication of microscopes from 2D media. Flexure mechanisms created via folding enable a flat compact design. Structural loops in folded paper provide kinematic constraints as a means for passive self-alignment. This light, rugged instrument can survive harsh field conditions while providing a diversity of imaging capabilities, thus serving wide-ranging applications for cost-effective, portable microscopes in science and education. [ABSTRACT FROM AUTHOR]

Amphimeriasis, a fish-borne zoonotic disease caused by the liver fluke Amphimerus spp., has recently been reported as an emerging disease affecting an indigenous Ameridian group, the Chachi, living in Ecuador. The only method for diagnosing amphimeriasis was the microscopic detection of eggs from the parasite in patients' stool samples with very low sensitivity. Our group developed an ELISA technique for detection of anti-Amphimerus IgG in human sera and a molecular method based on LAMP technology (named LAMPhimerus) for specific and sensitive parasite DNA detection. The LAMPhimerus method showed to be much more sensitive than classical parasitological methods for amphimeriasis diagnosis using human stool samples for analysis. The objective of this work is to demonstrate the feasibility of using dried stool samples on filter paper as source of DNA in combination with the effectiveness of our previously designed LAMPhimerus assay for successfully Amphimerus sp. detection in clinical stool samples. A total of 102 untreated and undiluted stool samples collected from Chachi population were spread as thin layer onto common filter paper for easily transportation to our laboratory and stored at room temperature for one year until DNA extraction. When LAMPhimerus method was applied for Amphimerus sp. DNA detection, a higher number of positive results was detected (61/102; 59.80%) in comparison to parasitological methods (38/102; 37.25%), including 28/61 (45.90%) microscopy-confirmed Amphimerus sp. infections. The diagnostic parameters for the sensitivity and specificity werecalculated for our LAMPhimerus assay, which were 79.17% and 65.98%, respectively. We demonstrate, for the first time, that common filter paper is useful for easy collection and long-term storage of human stool samples for later DNA extraction and molecular analysis of human-parasitic trematode eggs. This simple, economic and easily handling method combined with the specific and sensible LAMPhimerus assay has the potential to beused as an effective molecular large-scale screening test for amphimeriasis-endemic areas. [ABSTRACT FROM AUTHOR]

Background: Identification of the source of mosquito blood meals is an important component for disease control and surveillance. Recently, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) profiling has emerged as an effective tool for mosquito blood meal identification, using the abdomens of freshly engorged mosquitoes. In the field, mosquito abdomens are crushed on Whatman filter papers to determine the host feeding patterns by identifying the origin of their blood meals. The aim of this study was to test whether crushing engorged mosquito abdomens on Whatman filter papers was compatible with MALDI-TOF MS for mosquito blood meal identification. Both laboratory reared and field collected mosquitoes were tested. Material and methods: Sixty Anopheles gambiae Giles were experimentally engorged on the blood of six distinct vertebrate hosts (human, sheep, rabbit, dog, chicken and rat). The engorged mosquito abdomens were crushed on Whatman filter papers for MALDI-TOF MS analysis. 150 Whatman filter papers, with mosquitoes engorged on cow and goat blood, were preserved. A total of 77 engorged mosquito abdomens collected in the Comoros Islands and crushed on Whatman filter papers were tested with MALDI-TOF MS. Results: The MS profiles generated from mosquito engorged abdomens crushed on Whatman filter papers exhibited high reproducibility according to the original host blood. The blood meal host was correctly identified from mosquito abdomens crushed on Whatman filter papers by MALDI-TOF MS. The MS spectra obtained after storage were stable regardless of the room temperature and whether or not they were frozen. The MS profiles were reproducible for up to three months. For the Comoros samples, 70/77 quality MS spectra were obtained and matched with human blood spectra. This was confirmed by molecular tools. Conclusion: The results demonstrated that MALDI-TOF MS could identify mosquito blood meals from Whatman filter papers collected in the field during entomological surveys. The application of MALDI-TOF MS has proved to be rapid and successful, making it a new and efficient tool for mosquito-borne disease surveillance. [ABSTRACT FROM AUTHOR]

The need to complete multiple tasks concurrently is a common occurrence both daily life and in occupational activities, which can often include simultaneous cognitive and physical demands. As one example, there is increasing availability of head-worn display technologies that can be employed when a user is mobile (e.g., while walking). This new method of information presentation may, however, introduce risks of adverse outcomes such as a decrement to gait performance. The goal of this study was thus to quantify the effects of a head-worn display (i.e., smart glasses) on motor variability during gait and to compare these effects with those of other common information displays (i.e., smartphone and paper-based system). Twenty participants completed four walking conditions, as a single task and in three dual-task conditions (three information displays). In the dual-task conditions, the information display was used to present several cognitive tasks. Three different measures were used to quantify variability in gait parameters for each walking condition (using the cycle-to-cycle standard deviation, sample entropy, and the “goal-equivalent manifold” approach). Our results indicated that participants used less adaptable gait strategies in dual-task walking using the paper-based system and smartphone conditions compared with single-task walking. Gait performance, however, was less affected during dual-task walking with the smart glasses. We conclude that the risk of an adverse gait event (e.g., a fall) in head-down walking conditions (i.e., the paper-based system and smartphone conditions) were higher than in single-task walking, and that head-worn displays might help reduce the risk of such events during dual-task gait conditions. [ABSTRACT FROM AUTHOR]

Pyocyanin is a toxin produced by Pseudomonas aeruginosa. Here we describe a novel paper-based electrochemical sensor for pyocyanin detection, manufactured with a simple and inexpensive approach based on electrode printing on paper. The resulting sensors constitute an effective electrochemical method to quantify pyocyanin in bacterial cultures without the conventional time consuming pretreatment of the samples. The electrochemical properties of the paper-based sensors were evaluated by ferri/ferrocyanide as a redox mediator, and showed reliable sensing performance. The paper-based sensors readily allow for the determination of pyocyanin in bacterial cultures with high reproducibility, achieving a limit of detection of 95 nM and a sensitivity of 4.30 μA/μM in standard culture media. Compared to the similar commercial ceramic based sensors, it is a 2.3-fold enhanced performance. The simple in-house fabrication of sensors for pyocyanin quantification allows researchers to understand in vitro adaptation of P. aeruginosa infections via rapid screenings of bacterial cultures that otherwise are expensive and time-consuming. [ABSTRACT FROM AUTHOR]

Introduction: Data collection using paper-based questionnaires can be time consuming and return errors affect data accuracy, completeness, and information quality in health surveys. We compared smartphone and paper-based data collection systems in the Burden of Obstructive Lung Disease (BOLD) study in rural Sudan. Methods: This exploratory pilot study was designed to run in parallel with the cross-sectional household survey. The Open Data Kit was used to programme questionnaires in Arabic into smartphones. We included 100 study participants (83% women; median age = 41.5 ± 16.4 years) from the BOLD study from 3 rural villages in East-Gezira and Kamleen localities of Gezira state, Sudan. Questionnaire data were collected using smartphone and paper-based technologies simultaneously. We used Kappa statistics and inter-rater class coefficient to test agreement between the two methods. Results: Symptoms reported included cough (24%), phlegm (15%), wheezing (17%), and shortness of breath (18%). One in five were or had been cigarette smokers. The two data collection methods varied between perfect to slight agreement across the 204 variables evaluated (Kappa varied between 1.00 and 0.02 and inter-rater coefficient between 1.00 and -0.12). Errors were most commonly seen with paper questionnaires (83% of errors seen) vs smartphones (17% of errors seen) administered questionnaires with questions with complex skip-patterns being a major source of errors in paper questionnaires. Automated checks and validations in smartphone-administered questionnaires avoided skip-pattern related errors. Incomplete and inconsistent records were more likely seen on paper questionnaires. Conclusion: Compared to paper-based data collection, smartphone technology worked well for data collection in the study, which was conducted in a challenging rural environment in Sudan. This approach provided timely, quality data with fewer errors and inconsistencies compared to paper-based data collection. We recommend this method for future BOLD studies and other population-based studies in similar settings. [ABSTRACT FROM AUTHOR]

Type 1 diabetes (T1D) is increasing in incidence and predictable with measurement of serum islet autoantibodies (iAb) years prior to clinical disease onset. Identifying iAb positive individuals reduces diabetic ketoacidosis and identifies individuals for T1D prevention trials. However, large scale screening for iAb remains challenging as assays have varying sensitivities and specificities, insulin autoantibodies remain difficult to measure and venipuncture is generally required to obtain serum. We developed an approach to reliably measure all four major iAb, including insulin autoantibodies, from dried blood spots (DBS) on filter-paper. By spiking iAb positive serum into iAb negative whole blood in a dose titration, we optimized the conditions for autoantibody elution from filter paper as measured by fluid phase radioimmunoassays. After assessing stability of measuring iAb from DBS over time, we then screened iAb from DBS and the corresponding serum in new-onset T1D (n = 52), and controls (n = 72) which included first-degree relatives of T1D patients. iAb measured from eluted DBS in new-onset T1D strongly correlated with serum measurements (R2 = 0.96 for mIAA, GADA = 0.94, IA-2A = 0.85, ZnT8A = 0.82, p<0.01 for each autoantibody). There were no false positives in control subjects, and 5/6 with previously unknown iAb positivity in sera were detected using DBS. With further validation, measuring iAb from DBS can be a reliable method to screen for T1D risk. [ABSTRACT FROM AUTHOR]

University scientific research ability is an important indicator to express the strength of universities. In this paper, the evaluation of university scientific research ability is investigated based on the output of sci-tech papers. Four university alliances from North America, UK, Australia, and China, are selected as the case study of the university scientific research evaluation. Data coming from Thomson Reuters InCites are collected to support the evaluation. The work has contributed new framework to the issue of university scientific research ability evaluation. At first, we have established a hierarchical structure to show the factors that impact the evaluation of university scientific research ability. Then, a new MCDM method called D-AHP model is used to implement the evaluation and ranking of different university alliances, in which a data-driven approach is proposed to automatically generate the D numbers preference relations. Next, a sensitivity analysis has been given to show the impact of weights of factors and sub-factors on the evaluation result. At last, the results obtained by using different methods are compared and discussed to verify the effectiveness and reasonability of this study, and some suggestions are given to promote China’s scientific research ability. [ABSTRACT FROM AUTHOR]

Do highly productive researchers have significantly higher probability to produce top cited papers? Or do high productive researchers mainly produce a sea of irrelevant papers—in other words do we find a diminishing marginal result from productivity? The answer on these questions is important, as it may help to answer the question of whether the increased competition and increased use of indicators for research evaluation and accountability focus has perverse effects or not. We use a Swedish author disambiguated dataset consisting of 48.000 researchers and their WoS-publications during the period of 2008–2011 with citations until 2014 to investigate the relation between productivity and production of highly cited papers. As the analysis shows, quantity does make a difference. [ABSTRACT FROM AUTHOR]

Authorship of peer-reviewed journal articles and abstracts has become the primary currency and reward unit in academia. Such a reward is crucial for students and postdocs who are often under-compensated and thus highly value authorship as an incentive. While numerous scientific and publishing organizations have written guidelines for determining author qualifications and author order, there remains much ambiguity when it comes to how these criteria are weighed by research faculty. Here, we sought to provide some initial insight on how faculty view the relative importance of 11 criteria for scientific authorship. We distributed an online survey to 564 biomedical engineering, biology, and bioengineering faculty members at 10 research institutions across the United States. The response rate was approximately 18%, resulting in a final sample of 102 respondents. Results revealed an agreement on some criteria, such as time spent conducting experiments, but there was a lack of agreement regarding the role of funding procurement. This study provides quantitative assessments of how faculty members in the biosciences evaluate authorship criteria. We discuss the implications of these findings for researchers, especially new graduate students, to help navigate the discrepancy between official policies for authorship and the contributions that faculty truly value. [ABSTRACT FROM AUTHOR]

Some scholars add authors to their research papers or grant proposals even when those individuals contribute nothing to the research effort. Some journal editors coerce authors to add citations that are not pertinent to their work and some authors pad their reference lists with superfluous citations. How prevalent are these types of manipulation, why do scholars stoop to such practices, and who among us is most susceptible to such ethical lapses? This study builds a framework around how intense competition for limited journal space and research funding can encourage manipulation and then uses that framework to develop hypotheses about who manipulates and why they do so. We test those hypotheses using data from over 12,000 responses to a series of surveys sent to more than 110,000 scholars from eighteen different disciplines spread across science, engineering, social science, business, and health care. We find widespread misattribution in publications and in research proposals with significant variation by academic rank, discipline, sex, publication history, co-authors, etc. Even though the majority of scholars disapprove of such tactics, many feel pressured to make such additions while others suggest that it is just the way the game is played. The findings suggest that certain changes in the review process might help to stem this ethical decline, but progress could be slow. [ABSTRACT FROM AUTHOR]

It is important to implement detection and assessment of plant diseases based on remotely sensed data for disease monitoring and control. Hyperspectral data of healthy leaves, leaves in incubation period and leaves in diseased period of wheat stripe rust and wheat leaf rust were collected under in-field conditions using a black-paper-based measuring method developed in this study. After data preprocessing, the models to identify the diseases were built using distinguished partial least squares (DPLS) and support vector machine (SVM), and the disease severity inversion models of stripe rust and the disease severity inversion models of leaf rust were built using quantitative partial least squares (QPLS) and support vector regression (SVR). All the models were validated by using leave-one-out cross validation and external validation. The diseases could be discriminated using both distinguished partial least squares and support vector machine with the accuracies of more than 99%. For each wheat rust, disease severity levels were accurately retrieved using both the optimal QPLS models and the optimal SVR models with the coefficients of determination (R2) of more than 0.90 and the root mean square errors (RMSE) of less than 0.15. The results demonstrated that identification and severity evaluation of stripe rust and leaf rust at the leaf level could be implemented based on the hyperspectral data acquired using the developed method. A scientific basis was provided for implementing disease monitoring by using aerial and space remote sensing technologies. [ABSTRACT FROM AUTHOR]

We have developed a new litmus paper test (DipTest) for detecting Escherichia coli (E. coli) in water samples by performing enzymatic reactions directly on the porous paper substrate. The paper strip consists of a long narrow piece of cellulose blotting paper coated with chemoattractant (at bottom edge), wax hydrophobic barrier (at the top edge), and custom formulated chemical reagents (at reaction zone immediately below the wax hydrophobic barrier). When the paper strip is dipped in water, E. coli in the water sample is attracted toward the paper strip due to a chemotaxic mechanism followed by the ascent along the paper strip toward the reaction zone due to a capillary wicking mechanism, and finally the capillary motion is arrested at the top edge of the paper strip by the hydrophobic barrier. The E. coli concentrated at the reaction zone of the paper strip will react with custom formulated chemical reagents to produce a pinkish-red color. Such a color change on the paper strip when dipped into water samples indicates the presence of E. coli contamination in potable water. The performance of the DipTest device has been checked with different known concentrations of E. coli contaminated water samples using different dip and wait times. The DipTest device has also been tested with different interfering bacteria and chemical contaminants. It has been observed that the different interfering contaminants do not have any impact on the DipTest, and it can become a potential solution for screening water samples for E. coli contamination at the point of source. [ABSTRACT FROM AUTHOR]

The safety of highly aggregated tourist crowds is a challenging and important issue. This paper not only provided a comprehensive analysis of the accidents of highly aggregated tourist crowds but also determined the occurrence mechanism and coping paths. Based on the analysis of multiple cases, we found that the variable status of highly aggregated tourist crowds was the result of the interaction of three main elements: multisource pressure, state mutations and management responses. A series of factors interact and result in accidents, and the lack of a management response or a low-quality management response is the root cause of such accidents. A high-quality management response is a basic safety precaution for highly aggregated tourist crowds. Therefore, forming a virtuous circle of multisource pressure, state mutations and management responses is an effective path for coping with accidents. [ABSTRACT FROM AUTHOR]

Financial sanctions are often thought of as the “soft alternative” to armed conflict and are widely used in the 21st century. Nonetheless, sanctions are often criticized for being non-specific in their action, and having impact beyond their intended remit. One often-overlooked area affected by sanctions are academic systems of research and education. Sanctions place “invisible barriers” for research in these countries by limiting access to necessary resources and curtailing their effective use. In this paper we present a national survey of Sudanese academics focused on the impact of 20 years of economic sanctions on their work. It identifies key areas of academic research and education that have been impacted by international sanctions. Moreover, these data highlight how the impact of sanctions on academia is likely to persist long after they are formally lifted. The paper concludes by problematising the current interpretation of jus post bellum, or moral behaviour after conflict. It suggests that the responsibility to make reparations in the form of support for academic systems applies to countries who impose economic sanctions. [ABSTRACT FROM AUTHOR]

Past research on the process of extinguishing a fire typically used a traditional linear water jet falling point model and the results ignored external factors, such as environmental conditions and the status of the fire engine, even though the water jet falling point location prediction was often associated with these parameters and showed a nonlinear relationship. This paper constructed a BP (Back Propagation) neural network model. The fire gun nozzle characteristics were included as model inputs, and the water discharge point coordinates were the model outputs; thus, the model could precisely predict the water discharge point with small error and high precision to determine an accurate firing position and allow for the timely adjustment of the spray gun. To improve the slow convergence and local optimality problems of the BP neural network (BPNN), this paper further used a genetic algorithm to optimize the BPNN (GA-BPNN). The BPNN can be used to optimize the weights in the network to train them for global optimization. A genetic algorithm was introduced into the neural network approach, and the water jet landing prediction model was further improved. The simulation results showed that the prediction accuracy of the GA-BP model was better than that of the BPNN alone. The established model can accurately predict the location of the water jet, making the prediction results more useful for firefighters. [ABSTRACT FROM AUTHOR]

Classifying bank accounts by using transaction data is encouraging in cracking down on illegal financial activities. However, few research simultaneously use heterogenous features, which are embedded in the time series data. In this paper, a two route convolution neural network TRHD-CNN model, fed with two types of heterogeneous feature matrices, is proposed for classifying the bank accounts. TRHD-CNN adopts divide and conquer strategy to extract characteristics from two types of data source independently. The strategy is proved able in mining complementary classification characteristics. We firstly transfer the original log data into a directed and dynamic transaction network. On the basis of that, two feature generation methods are devised for extracting information from local topological structure and time series transaction respectively. A DirectedWalk method is developed in this paper to learning the network vector of vertices used for embedding the neighbor relationship of bank account. The extensive experimental results, conducted on a real bank transaction dataset that contains illegal pyramid selling accounts, show the significant advantage of TRHD-CNN over the existing methods. TRHD-CNN can provide recall scores up to 5.15% higher than competing methods. In addition, the two-route architecture of TRHD-CNN is easy to extend to multi-route scenarios and other fields. [ABSTRACT FROM AUTHOR]

Determining the distribution of the Yangtze finless porpoise (Neophocaena asiaeorientalis asiaeorientalis, YFP) in the Yangtze River has to date relied on traditional visual and counting methods, but such field surveys are time-consuming and expensive. Analyses using environmental DNA (eDNA) to investigate the presence and range of endangered aquatic species have proven to be more economical and effective detection methods, and are a non-invasive approach to sampling. A challenge of relying on eDNA for YFP monitoring is that the Yangtze River is characterized by high turbidity and a strong current. Here, we used an eDNA-based approach to estimate the presence of YFP at 18 sites in the Yangtze River in August 2017 and at an additional 11 sites in January 2018. At each sampling site, we filtered six 1 L water samples with 5 µm pore size filter paper and quantified the amount of YFP eDNA in each water sample using quantitative real-time polymerase chain reaction (qPCR). In addition, YFP eDNA was successfully detected in locations where we visually observed YFP, as well as in locations where YFP were not observed directly. We found that our eDNA-based method had higher detection rates than traditional field survey methods. Although YFP was visually observed in the Yangtze River in winter, water samples collected during the summer contained significantly higher YFP eDNA than winter water samples. Our results demonstrate the potential effectiveness of eDNA detection methods in determining the distribution of YFP in the Yangtze River. [ABSTRACT FROM AUTHOR]

The use of elasticities of substitution between inputs is a standard method for addressing the effect of a change in the mix of inputs used for production from a technical or cost standpoint. Most estimation methods use parametric production or cost functions or frontiers to estimate these elasticities. A potentially useful nonparametric alternative is data envelopment analysis (DEA). The purpose of this paper is to derive elasticities of input substitution for both technical and cost frontiers using DEA, extending the use of this approach in the field of economics and associated fields. The paper provides derivations for both Hicksian (production and cost frontier) and Morishima (cost frontier) elasticities of input substitution, as well as a parsimonious method for estimating them using DEA. The derivations are presented using an agricultural example form Kansas, USA. [ABSTRACT FROM AUTHOR]

Background: Floating catchment methods have recently been applied to identify priority regions for Automated External Defibrillator (AED) deployment, to aid in improving Out of Hospital Cardiac Arrest (OHCA) survival. This approach models access as a supply-to-demand ratio for each area, targeting areas with high demand and low supply for AED placement. These methods incorporate spatial covariates on OHCA occurrence, but do not provide precise AED locations, which are critical to the initial intent of such location analysis research. Exact AED locations can be determined using optimisation methods, but they do not incorporate known spatial risk factors for OHCA, such as income and demographics. Combining these two approaches would evaluate AED placement impact, describe drivers of OHCA occurrence, and identify areas that may not be appropriately covered by AED placement strategies. There are two aims in this paper. First, to develop geospatial models of OHCA that account for and display uncertainty. Second, to evaluate the AED placement methods using geospatial models of accessibility. We first identify communities with the greatest gap between demand and supply for allocating AEDs. We then use this information to evaluate models for precise AED location deployment. Methods: Case study data set consisted of 2802 OHCA events and 719 AEDs. Spatial OHCA occurrence was described using a geospatial model, with possible spatial correlation accommodated by introducing a conditional autoregressive (CAR) prior on the municipality-level spatial random effect. This model was fit with Integrated Nested Laplacian Approximation (INLA), using covariates for population density, proportion male, proportion over 65 years, financial strength, and the proportion of land used for transport, commercial, buildings, recreation, and urban areas. Optimisation methods for AED locations were applied to find the top 100 AED placement locations. AED access was calculated for current access and 100 AED placements. Priority rankings were then given for each area based on their access score and predicted number of OHCA events. Results: Of the 2802 OHCA events, 64.28% occurred in rural areas, and 35.72% in urban areas. Additionally, over 70% of individuals were aged over 65. Supply of AEDs was less than demand in most areas. Priority regions for AED placement were identified, and access scores were evaluated for AED placement methodology by ranking the access scores and the predicted OHCA count. AED placement methodology placed AEDs in areas with the highest priority, but placed more AEDs in areas with more predicted OHCA events in each grid cell. Conclusion: The methods in this paper incorporate OHCA spatial risk factors and OHCA coverage to identify spatial regions most in need of resources. These methods can be used to help understand how AED allocation methods affect OHCA accessibility, which is of significant practical value for communities when deciding AED placements. [ABSTRACT FROM AUTHOR]

Background: Detection of pulmonary nodules is an important aspect of an automatic detection system. Incomputer-aided diagnosis (CAD) systems, the ability to detect pulmonary nodules is highly important, which plays an important role in the diagnosis and early treatment of lung cancer. Currently, the detection of pulmonary nodules depends mainly on doctor experience, which varies. This paper aims to address the challenge of pulmonary nodule detection more effectively. Methods: A method for detecting pulmonary nodules based on an improved neural network is presented in this paper. Nodules are clusters of tissue with a diameter of 3 mm to 30 mm in the pulmonary parenchyma. Because pulmonary nodules are similar to other lung structures and have a low density, false positive nodules often occur. Thus, our team proposed an improved convolutional neural network (CNN) framework to detect nodules. First, a nonsharpening mask is used to enhance the nodules in computed tomography (CT) images; then, CT images of 512×512 pixels are segmented into smaller images of 96×96 pixels. Second, in the 96×96 pixel images which contain or exclude pulmonary nodules, the plaques corresponding to positive and negative samples are segmented. Third, CT images segmented into 96×96 pixels are down-sampled to 64×64 and 32×32 size respectively. Fourth, an improved fusion neural network structure is constructed that consists of three three-dimensional convolutional neural networks, designated as CNN-1, CNN-2, and CNN-3, to detect false positive pulmonary nodules. The networks’ input sizes are 32×32×32, 64×64×64, and 96×96×96 and include 5, 7, and 9 layers, respectively. Finally, we use the AdaBoost classifier to fuse the results of CNN-1, CNN-2, and CNN-3. We call this new neural network framework the Amalgamated-Convolutional Neural Network (A-CNN) and use it to detect pulmonary nodules. Findings: Our team trained A-CNN using the LUNA16 and Ali Tianchi datasets and evaluated its performance using the LUNA16 dataset. We discarded nodules less than 5mm in diameter. When the average number of false positives per scan was 0.125 and 0.25, the sensitivity of A-CNN reached as high as 81.7% and 85.1%, respectively. [ABSTRACT FROM AUTHOR]

Aiming at serving the interdisciplinary demand in network science, this paper introduces a new concept for complex networks, named network stiffness, which is extracted from structural engineering by assuming that a complex network behaves similarly with a structured framework. This analogy allows interpreting that a complex network can resist against any cause attempting to induce deformation changes to the network’s structure, regardless of whether the network is material or not. Within this framework, this paper examines the context of applying the conceptual analogy of stiffness from the field of structural engineering to network science and then it develops computational approaches capturing different aspects of network stiffness so that to be used in complex network analysis. The implementation of these approaches to a real-world network (global inbound tourism network) shows that stiffness can produce interesting insights to complex network analysis about the factors related to changes caused to the structure and the status of a complex network. [ABSTRACT FROM AUTHOR]

This paper aims to demonstrate the impact of coal enterprises’ vertical integration on the performance of innovation corporate social responsibility (ICSR) and to elaborate its specific transmission path through financing structure and market power. This paper takes the data of A-share listed coal company from 2008 to 2017 as samples, uses input-output table method to measure the degree of vertical integration, and explores the relationship between the four factors through multiple linear regression and Bootstrap method. We found that: (1) the vertical integration of coal enterprises has positive incentives for the promotion of ICSR. (2) Financing structure and market power play a chain intermediary role in this process of incentive. (3) In areas with high marketization process, vertical integration has more significant incentive effect on ICSR. The paper extends the research on the relationship between vertical integration and innovation, which provides a reference for the improvement of China’s supply-side reform and corporate social responsibility (CSR) fulfillment policy. It is helpful to promote the sustainable development of the coal industry, stimulate the innovation vitality of enterprises, and improve the fulfillment of CSR. [ABSTRACT FROM AUTHOR]

Tropical tuna support some of the largest and most valuable artisanal and industrial fisheries worldwide, conducted to a large degree with Fish Aggregating Devices (FADs). Yellowfin, bigeye and skipjack are the main tuna species found in mixed aggregations around FADs and they are simultaneously encircled by the purse seining operation. One of the key challenges that purse seine fleets fishing with drifting FADs face in all oceans is to be able to target species in healthy condition such as skipjack, while reducing impacts on bigeye and yellowfin in areas where there is a need to reduce fishing pressure on these species. The present paper explores a technical solution for selective fishing at FADs by means of acoustic equipment used by purse seiners. Acoustic frequency response of skipjack and bigeye tuna were determined at 38, 120 and 200 kHz. Skipjack showed stronger response at higher frequencies. On the contrary, bigeye showed stronger responses at lower frequencies. The robust pattern shown in frequency responses of the two species demonstrates the potential to predict abundance and species proportions based on purely acoustic measures. The paper also addresses the conditions that need to be met to successfully apply this technology for selective fishing as well as other uses of direct acoustic observations to support tuna conservation. [ABSTRACT FROM AUTHOR]

Accurate Origin-Destination (OD) prediction is significant for effective traffic monitor, which can support operation decision in traffic planning and management field. The enclosed expressway network system like toll gates system in China can collect mounts of trip records which can be gathered for OD prediction. The paper develops a novel neural network, which is named Expressway OD Prediction Neural Network (EODPNN) for toll data-based prediction. The network consists of the following three modules: The Feature Extension Module, the Memory Module, and the Prediction Module. In the process, the attributes data which can reflect the city attribute such as GDP, population, and the number of vehicles are considered to embeded into the notwork to increase the accuracy of the model. For the applicability improvment of the model, we categorize the cities in multiple classes based on their economy and population scales in this paper, which can provide a higher accurate prediction of OD by EODPNN. The results shows that, comparing to the traditional model like ARIMA and SVM, or typical neural networks like Bidirectional Long Short-term Memory, the EODPNN delivers a better prediction performance. The method proposed in this paper has been fully verified and has a potential to transplant to the other OD data-based management systems for a more accurate and flexible prediction. [ABSTRACT FROM AUTHOR]

The paper introduces structural diversity as a new approach to quantify the complexity of technologies. By modeling technologies as combinatorial networks, a measure of technological complexity is derived that represents the diversity of (sub-)network topologies in these networks. It is further argued that this measure can be empirically approximated with the Network Diversity Score (NDS). The paper also presents an application of this approach to European patent data from 1980 to 2015. On this basis, the measure of structural diversity is shown to replicate a number of stylized facts commonly associated with technological complexity: Complexity increases over time and younger technologies are more complex than older technologies. Complex technologies are also associated to larger R&D efforts and require more collaborative R&D activities. Lastly, when controlling for technologies’ size, technologies scoring high on structural diversity are also shown to concentrate in space. [ABSTRACT FROM AUTHOR]

Map-matching technology is a key and difficult technology in the development of vehicle navigation systems. Only by correctly identifying the road segment on which the vehicle is traveling can the navigation system make the right decision. At the same time, the complexity of the road network structure and a variety of error factors have introduced great challenges to map matching and have attracted the attention of many researchers as well. This paper analyzes various map-matching algorithms, determines that the key to the matching performance is the junction matching, performs an in-depth study on the junction-matching problem, and puts forward the junction decision domain model. The model mainly involves information regarding the width of the road segment, the angle between two road segments, the accuracy of GPS and the accuracy of the road network. In this paper, we use this model to improve the map-matching algorithm based on a hidden Markov model (HMM). The experimental results show that the improved matching algorithm can effectively reduce the error rate of junction matching and improve the matching performance of a navigation system. [ABSTRACT FROM AUTHOR]

Animal movement encodes information that is meaningfully interpreted by natural counterparts. This is a behavior that roboticists are trying to replicate in artificial systems but that is not well understood even in natural systems. This paper presents a count on the cardinality of a discretized posture space—an aspect of expressivity—of articulated platforms. The paper uses an information-theoretic measure, Shannon entropy, to create observations analogous to Moore’s Law, providing a measure that complements traditional measures of the capacity of robots. This analysis, applied to a variety of natural and artificial systems, shows trends in increasing capacity in both internal and external complexity for natural systems while artificial, robotic systems have increased significantly in the capacity of computational (internal) states but remained more or less constant in mechanical (external) state capacity. The quantitative measure proposed in this paper provides an additional lens through which to compare natural and artificial systems. [ABSTRACT FROM AUTHOR]

In this paper, we propose an Emotional Trigger System to impart an automatic emotion expression ability within the humanoid robot REN-XIN, in which the Emotional Trigger is an emotion classification model trained from our proposed Word Mover’s Distance(WMD) based algorithm. Due to the long time delay of the WMD-based Emotional Trigger System, we propose an enhanced Emotional Trigger System to enable a smooth interaction with the robot in which the Emotional Trigger is replaced by a conventional convolution neural network and a long short term memory network (CNN_LSTM)-based deep neural network. In our experiments, the CNN_LSTM based model only need 10 milliseconds or less to finish the classification without a decrease in accuracy, while the WMD-based model needed approximately 6-8 seconds to give a result. In this paper, the experiments are conducted based on the same sub-data sets of the Chinese emotional corpus(Ren_CECps) used in former WMD experiments: one comprises 50% data for training and 50% for testing(1v1 experiment), and the other comprises 80% data for training and 20% for testing(4v1 experiment). The experiments are conducted using WMD, CNN_LSTM, CNN and LSTM. The results show that CNN_LSTM obtains the best F1 score (0.35) in the 1v1 experiment and almost the same accuracy of F1 scores (0.366 vs 0.367) achieved by WMD in the 4v1 experiment. Finally, we present demonstration videos with the same scenario to show the performance of robot control driven by CNN_LSTM-based Emotional Trigger System and WMD-based Emotional Trigger System. To improve the comparison, total manual-control performance is also recorded. [ABSTRACT FROM AUTHOR]

Based on electrohysterogram, this paper designed a new method using wavelet-based nonlinear features and stacked sparse autoencoder for preterm birth detection. For each sample, three level wavelet decomposition of a time series was performed. Approximation coefficients at level 3 and detail coefficients at levels 1, 2 and 3 were extracted. Sample entropy of the detail coefficients at levels 1, 2, 3 and approximation coefficients at level 3 were computed as features. The classifier was constructed based on stacked sparse autoencoder. In addition, stacked sparse autoencoder was further compared with extreme learning machine and support vector machine in relation to their classification performance of electrohysterogram. The experiment results reveal that classifier based on stacked sparse autoencoder showed better performance than the other two classifiers with an accuracy of 90%, a sensitivity of 92%, a specificity of 88%. The results indicate that the method proposed in this paper could be effective for detecting preterm birth in electrohysterogram and the framework designed in this work presents higher discriminability than other techniques. [ABSTRACT FROM AUTHOR]

An extreme learning machine (ELM) is a novel training method for single-hidden layer feedforward neural networks (SLFNs) in which the hidden nodes are randomly assigned and fixed without iterative tuning. ELMs have earned widespread global interest due to their fast learning speed, satisfactory generalization ability and ease of implementation. In this paper, we extend this theory to hypercomplex space and attempt to simultaneously consider multisource information using a hypercomplex representation. To illustrate the performance of the proposed hypercomplex extreme learning machine (HELM), we have applied this scheme to the task of multispectral palmprint recognition. Images from different spectral bands are utilized to construct the hypercomplex space. Extensive experiments conducted on the PolyU and CASIA multispectral databases demonstrate that the HELM scheme can achieve competitive results. The source code together with datasets involved in this paper can be available for free download at . [ABSTRACT FROM AUTHOR]

Computational modeling of engineered gene circuits is an important while challenged task in systems biology. In order to describe and predict the response behaviors of genetic circuits using reliable model parameters, this paper applies an optimal experimental design(OED) method to obtain input signals. In order to obtain informative observations, this study focuses on maximizing Fisher information matrix(FIM)-based optimal criteria and to provide optimal inputs. Furthermore, this paper designs a two-stage optimization with the modified E-optimal criteria and applies harmony search(HS)-based OED algorithm to minimize estimation errors. The proposed optimal identification methodology involves estimation errors and the sample size to pursue a trade-off between estimation accuracy and measurement cost in modeling gene networks. The designed cost function takes two major factors into account, in which experimental costs are proportional to the number of time points. Experiments select two types of synthetic genetic networks to validate the effectiveness of the proposed HS-OED approach. Identification outcomes and analysis indicate the proposed HS-OED method outperforms two candidate OED approaches, with reduced computational effort. [ABSTRACT FROM AUTHOR]

Introduction: The system of clustered regularly interspaced short palindromic repeats (CRISPR) and CRISPR-associated proteins (cas) is a new technology that allows easier manipulation of the genome. Its potential to edit genes opened a new door in treatment development for incurable neurological monogenic diseases (NMGDs). The aim of this systematic review was to summarise the findings on the current development of CRISPR-cas for therapeutic purposes in the most frequent NMGDs and provide critical assessment. Methods and data acquisition: We searched the MEDLINE and EMBASE databases, looking for original studies on the use of CRISPR-cas to edit pathogenic variants in models of the most frequent NMGDs, until end of 2017. We included all the studies that met the following criteria: 1. Peer-reviewed study report with explicitly described experimental designs; 2. In vitro, ex vivo, or in vivo study using human or other animal biological systems (including cells, tissues, organs, organisms); 3. focusing on CRISPR as the gene-editing method of choice; and 5. featured at least one NMGD. Results: We obtained 404 papers from MEDLINE and 513 from EMBASE. After removing the duplicates, we screened 490 papers by title and abstract and assessed them for eligibility. After reading 50 full-text papers, we finally selected 42 for the review. Discussion: Here we give a systematic summary on the preclinical development of CRISPR-cas for therapeutic purposes in NMGDs. Furthermore, we address the clinical interpretability of the findings, giving a comprehensive overview of the current state of the art. Duchenne’s muscular dystrophy (DMD) paves the way forward, with 26 out of 42 studies reporting different strategies on DMD gene editing in different models of the disease. Most of the strategies aimed for permanent exon skipping by deletion with CRISPR-cas. Successful silencing of the mHTT gene with CRISPR-cas led to successful reversal of the neurotoxic effects in the striatum of mouse models of Huntington’s disease. Many other strategies have been explored, including epigenetic regulation of gene expression, in cellular and animal models of: myotonic dystrophy, Fraxile X syndrome, ataxias, and other less frequent dystrophies. Still, before even considering the clinical application of CRISPR-cas, three major bottlenecks need to be addressed: efficacy, safety, and delivery of the systems. This requires a collaborative approach in the research community, while having ethical considerations in mind. [ABSTRACT FROM AUTHOR]

This paper presents a method to reduce a set of n 2D points to a smaller set of s 2D points with the property that the convex hull on the smaller set is the same as the convex hull of the original bigger set. The paper shows, experimentally, that such reduction accelerates computations; the time it takes to reduce from n down to s points plus the time of computing the convex hull on the s points is less than the time to compute the convex hull on the original set of n points. The method accepts 2D points expressed as real numbers and thus extends our previous method that required points as integers. The method achieves a percentage of reduction of points of over 90% in a collections of four datasets. This amount of reduction provides speedup factors of at least two for various common convex hull algorithms. Theoretically, the reduction method executes in time within O(n) and thus is suitable for preprocessing 2D data before computing the convex hull by any known algorithm. [ABSTRACT FROM AUTHOR]

This paper formulates a support vector machine with quantile hyper-spheres (QHSVM) for pattern classification. The idea of QHSVM is to build two quantile hyper-spheres with the same center for positive or negative training samples. Every quantile hyper-sphere is constructed by using pinball loss instead of hinge loss, which makes the new classification model be insensitive to noise, especially the feature noise around the decision boundary. Moreover, the robustness and generalization of QHSVM are strengthened through maximizing the margin between two quantile hyper-spheres, maximizing the inner-class clustering of samples and optimizing the independent quadratic programming for a target class. Besides that, this paper proposes a novel local center-based density estimation method. Based on it, ρ-QHSVM with surrounding and clustering samples is given. Under the premise of high accuracy, the execution speed of ρ-QHSVM can be adjusted. The experimental results in artificial, benchmark and strip steel surface defects datasets show that the QHSVM model has distinct advantages in accuracy and the ρ-QHSVM model is fit for large-scale datasets. [ABSTRACT FROM AUTHOR]

Due to their simplicity and operating mode, magnetic loops are one of the most used traffic sensors in Intelligent Transportation Systems (ITS). However, at this moment, their potential is not being fully exploited, as neither the speed nor the length of the vehicles can be surely ascertained with the use of a single magnetic loop. In this way, nowadays the vast majority of them are only being used to measure traffic flow and count vehicles on urban and interurban roads. This is the reason why we presented in a previous paper the double magnetic loop, capable of improving the features and functionalities of the conventional single loop without increasing the cost or introducing additional complexity. In that paper, it was introduced their design and peculiarities, how to calculate their magnetic field and three different methods to calculate their inductance. Therefore, with the purpose of improving the existing infrastructure and providing it with greater potential and reliability, this paper will focus on justifying and demonstrating the advantages offered by these double loops versus the conventional ones. This will involve analyzing the magnetic profiles generated by the passage of vehicles over double loops and comparing them with those already known. Moreover, it will be shown how the vehicle speed, the traffic direction and many other data can be obtained more easily and with less margin of error by using these new inductance signatures. [ABSTRACT FROM AUTHOR]

Understanding expression levels of proteins and their interactions is a key factor to diagnose and explain the Down syndrome which can be considered as the most prevalent reason of intellectual disability in human beings. In the previous studies, the expression levels of 77 proteins obtained from normal genotype control mice and from trisomic Ts65Dn mice have been analyzed after training in contextual fear conditioning with and without injection of the memantine drug using statistical methods and machine learning techniques. Recent studies have also pointed out that there may be a linkage between the Down syndrome and the immune system. Thus, the research presented in this paper aim at in silico identification of proteins which are significant to the learning process and the immune system and to derive the most accurate model for classification of mice. In this paper, the features are selected by implementing forward feature selection method after preprocessing step of the dataset. Later, deep neural network, gradient boosting tree, support vector machine and random forest classification methods are implemented to identify the accuracy. It is observed that the selected feature subsets not only yield higher accuracy classification results but also are composed of protein responses which are important for the learning and memory process and the immune system. [ABSTRACT FROM AUTHOR]

A diversity of arthropods (myrmecophiles) thrives within ant nests, many of them unmolested though some, such as the specialized Eucharitidae parasitoids, may cause direct damage to their hosts. Ants are known to discriminate between nestmates and non-nestmates, but whether they recognize the strength of a threat and their capacity to adjust their behavior accordingly have not been fully explored. We aimed to determine whether Ectatomma tuberculatum ants exhibited specific behavioral responses to potential or actual intruders posing different threats to the host colony and to contribute to an understanding of complex ant-eucharitid interactions. Behavioral responses differed significantly according to intruder type. Ants evicted intruders that represented a threat to the colony’s health (dead ants) or were not suitable as prey items (filter paper, eucharitid parasitoid wasps, non myrmecophilous adult weevils), but killed potential prey (weevil larvae, termites). The timing of detection was in accordance with the nature and size of the intruder: corpses (a potential source of contamination) were detected faster than any other intruder and transported to the refuse piles within 15 min. The structure and complexity of behavioral sequences differed among those intruders that were discarded. Workers not only recognized and discriminated between several distinct intruders but also adjusted their behavior to the type of intruder encountered. Our results confirm the previously documented recognition capabilities of E. tuberculatum workers and reveal a very fine-tuned intruder discrimination response. Colony-level prophylactic and hygienic behavioral responses through effective removal of inedible intruders appears to be the most general and flexible form of defense in ants against a diverse array of intruders. However, this generalized response to both potentially lethal and harmless intruders might have driven the evolution of ant-eucharitid interactions, opening a window for parasitoid attack and allowing adult parasitoid wasps to quickly leave the natal nest unharmed. [ABSTRACT FROM AUTHOR]

Introduction: The proportion of older persons in developing countries is increasing with no clear evidence of improvement in physical health. The aim of this paper was to examine the factors associated with older persons’ physical health in rural Uganda. Methods: This paper is based on a cross-sectional study of 912 older persons age 60 years and older across four major regions of Uganda. The study was conceptualized basing on World Health Organization quality of life BREF (WHOQOL-BREF). Analysis was done at three levels, that is, frequency distributions were generated to describe background characteristics of respondents and cross-tabulations were done to determine associations between dependent and each of the independent variables. Ordinal logistic regression was used to determine the predictors of physical health. Results: The likelihood of good physical health is high among older persons (Ops) who controlled their household assets (OR = 3.64; CI = 1.81–7.30) or the household assets controlled by their spouses (OR = 4.44; CI = 1.91–10.32) relative to those whose household assets were controlled by their children. There is high likelihood of good physical health among those who engage in physical activities (OR = 2.28; CI = 1.52–3.43) compared to those who do not. Conclusion: The findings have various policy implications, including creating an enabling environment and building capacities of older persons to remain in control of their household assets. Interventions focusing on deepening sensitization of older persons about importance of physical exercises could be a viable strategy for improving physical health of older persons. [ABSTRACT FROM AUTHOR]

Genetic maps order genetic markers along chromosomes. They are, for instance, extensively used in marker-assisted selection to accelerate breeding programs. Even for the same species, people often have to deal with several alternative maps obtained using different ordering methods or different datasets, e.g. resulting from different segregating populations. Having efficient tools to identify the consistency and discrepancy of alternative maps is thus essential to facilitate genetic map comparisons. We propose to encode genetic maps by bucket order, a kind of order, which takes into account the blurred parts of the marker order while being an efficient data structure to achieve low complexity algorithms. The main result of this paper is an O(n log(n)) procedure to identify the largest agreements between two bucket orders of n elements, their Longest Common Subsequence (LCS), providing an efficient solution to highlight discrepancies between two genetic maps. The LCS of two maps, being the largest set of their collinear markers, is used as a building block to compute pairwise map congruence, to visually emphasize maker collinearity and in some scaffolding methods relying on genetic maps to improve genome assembly. As the LCS computation is a key subroutine of all these genetic map related tools, replacing the current LCS subroutine of those methods by ours –to do the exact same work but faster– could significantly speed up those methods without changing their accuracy. To ease such transition we provide all required algorithmic details in this self contained paper as well as an R package implementing them, named LCSLCIS, which is freely available at: . [ABSTRACT FROM AUTHOR]

Text representation can map text into a vector space for subsequent use in numerical calculations and processing tasks. Word embedding is an important component of text representation. Most existing word embedding models focus on writing and utilize context, weight, dependency, morphology, etc., to optimize the training. However, from the linguistic point of view, spoken language is a more direct expression of semantics; writing has meaning only as a recording of spoken language. Therefore, this paper proposes the concept of a pronunciation-enhanced word embedding model (PWE) that integrates speech information into training to fully apply the roles of both speech and writing to meaning. This paper uses the Chinese language, English language and Spanish language as examples and presents several models that integrate word pronunciation characteristics into word embedding. Word similarity and text classification experiments show that the PWE outperforms the baseline model that does not include speech information. Language is a storehouse of sound-images; therefore, the PWE can be applied to most languages. [ABSTRACT FROM AUTHOR]

This paper proposes a power-system protection device designed to be integrated in smart environments based on Internet-of-Things technologies. The proposed system enhances electrical safety by fast disconnection of the power supply in case of fault events like leakage current, electrical arc, overcurrent or overvoltage and has been designed with the goal to be integrated in smart environments like smart homes or smart cities for protecting the electrical equipment. The system also enables real-time monitoring and notification events through an advanced communication interface using a data concentrator architecture. This paper provides an extended description of the proposed system’s design and implementation, as well as the experimental validation results. [ABSTRACT FROM AUTHOR]