Search

The selection of packing materials is an important factor to prolong the shelf life of food products, especially for perishable foods or produces. This research was conducted to determine the effect of packing materials (papers and plastics) on fresh Brazilian spinach leaves quality such as moisture content, water activity and total color difference (ΔΕ). The samples were stored at ambient temperature (25 °C) for 16 days. The moisture content and water activity of the samples were measure by moisture analyzer and water activity meter, respectively. The total color difference (ΔΕ) was calculated based on L*, a* and b* parameters. Generally, based on overall results, the packing materials significantly affected the quality of fresh Brazilian spinach leaves throughout 16 days of storage period. The results asserted that the paper materials are not suitable to use to pack fresh Brazilian spinach leaves for long period. It is also not recommended to use any paper material to pack fresh produce, especially perishable vegetables and fruits, in protecting their quality. The use of HDPE and PP plastics is recommended to prolong the shelf life of the fresh Brazilian spinach leaves. However, it has a limitation in controlling the changes of leaves color. [ABSTRACT FROM AUTHOR]

The paper soap is an innovation in making soap. The form of paper soap is unique like thin sheets paper. The addition of natural compounds such as virgin coconut oil (VCO) and whey kefir in soap making could improve the quality of paper soap as herbal product. This research aims to determine the optimum formulation of herbal paper soap in three whey kefir mass composition 8%, 18% and 23%. The paper soap makes using a hot process with additional glycerin as a plasticizer. The characterization of herbal paper soap is using parameters tested of pH value, stability of foam, unsaponified fat, organoleptic test, and water content. The characteristic of paper soap has a thickness of 1 mm, smells good, and slightly yellowish. The best herbal paper soap is obtained for a composition of 8% with water content, unsaponified fat, pH, and foam stability 28%, 0.39%, 8 and 83% respectively. Therefore, the herbal paper soap with whey kefir of 8% has complied SNI no. 3532-2016 standard. [ABSTRACT FROM AUTHOR]

In image processing and computer vision, image segmentation plays a crucial role. It finds a place in many image applications. Texture and colour features and its combination are among the main features used in image segmentation. This paper presents the literature review for colour-based segmentation techniques and texture-based segmentation techniques. The main objective for this paper is to provide the recent trends of both the color and texture segmentation technique in image segmentation as well as presenting the most popular evaluation measurements used for image segmentation. At the end of this paper, the conclusion for future work and its direction is presented. [ABSTRACT FROM AUTHOR]

The catalytic electroreduction of carbon dioxide represents a promising technology for the management of the energy sources and the abatement of CO2 emissions. For the industrial implementation of this process, it is required the development of a selective and stable nanostructured catalytic electrode. In this study, we evaluated the synthesis of nanostructured metallic electrodes produced by galvanostatic electrodeposition of copper onto a carbon paper support. The effects of deposition current density on morphology and catalytic properties of the electrodes were analyzed. The formation of copper nano and microstructure was observed on the external structure of the carbon paper support. Regarding the morphology, a correlation between applied current density and deposition structure was found. Electrodeposited electrodes showed a catalytic selectivity towards the production of carbon monoxide almost four times greater than copper foil electrodes. An inverse correlation between deposition current density and catalytic selectivity was observed. A decrease in the deposition current from -6 mA cm-2 to -2 mA cm−2 resulted in a doubling of the measured selectivity. [ABSTRACT FROM AUTHOR]

The different methods and application rates of an inoculum powder of sunflower Phoma rot pathogen Plenodomus lindquistii Gruyter, Aveskamp & Verkley for an artificial infection of seeds in the laboratory in soil were studied, the results are presented. The following methods of application of Phoma inoculum powder into soil were studied: into row, mixtures with soil, and on the bottom of a growth tray covered with a filter paper under soil. The application rates of an inoculum powder were 2.5 and 5.0 g per a row of 11 cm length; 5.0 and 10.0 g per 600 g of soil – mixing with soil and on the bottom of the growth tray. The method of application of the inoculum powder into a row in a rate of 5.0 g when the most seeds perished before sprouting were considered to be an optimal one. The sunflower infection with Phoma rot pathogen was weak in variants where pathogen powder was mixed with soil or placed under soil on the bottom of the growth tray. [ABSTRACT FROM AUTHOR]

Low cost disposable, paper chip has been fabricated by dip coating solution processed NiO nanoparticle on filter paper. NiO nanoparticles were prepared by a reliable, straightforward precipitation method and thermally decomposed at higher temperatures. Adsorbed NiO nanoparticles strongly modulate the fluorescence properties of filter paper leads to the quenching effect, due to the coverage of NiO nanoparticles on microfibrous cellulose filter paper. Bright field and fluorescence imaging were carried out with different concentrations of NiO nanoparticles, which shows efficient autofluorescence quenching of 90.02 % on the filter paper. [ABSTRACT FROM AUTHOR]

Machine calendaring is a finishing operation used in paper industry during which paper web is pressed between two or more steel rolls, with an objective to improve the surface properties like smoothness and gloss of the paper web. In this study an attempt has been made to develop modified nip mechanics model, which overcomes the drawbacks of existing nip mechanics models, applicable for machine calendaring in paper industry for calculating nip width. Also the effect of various calendaring parameters on nip width of machine calendar has been discussed. [ABSTRACT FROM AUTHOR]

A concept of the smart contract powered by Ethereum has raised the attention of investors in the crypto-currency market in the light of the distributed account book techniques in the Era of Blockchain 2.0. Based on the digitalization of the financial tools, smart contract adopts the smart validation and execution of the computation protocols extending the blockchain to the application level of use to reinforce the security and transparency of transaction deals. This paper aimed to investigate the principle, functions, ground mechanism of the smart contract, and protection approaches and evaluated the security issues existed in the investment process. Lastly, the paper summarized the Smart Contract design and development, loopholes, and protection approaches in the Smart Contract applications. [ABSTRACT FROM AUTHOR]

Industrial waste is a by-product of industrial processes from waste material or building material. The study was conducted to analyze the used of solid waste pulp dreg and grits through chemical characterization to make bricks. In brick formation, the CaO content is very important because it functions as an adhesive and from its characterization shows the CaO content is 58.10% in dregs and 59.76% in grits. From the research method carried out by mixing dreg and slaker grit waste with other materials, the best results were obtained at the maximum value of the compressive strength of quality I brick is 7 Mpa (SNI; 3.5 Mpa). Characterization of material used Scanning Electron Microscope (SEM), X-Ray Fluorescence (XRF) and IR Prestige-21 instruments to analyze the chemical content of the waste. Universal Testing Machine (UTM) was used for compressive strength analysis using material strength when given a load with certain pressure. The result showed that the best which for bricks that lower water absorption and bricks that have large compressive strength value 7 Mpa. [ABSTRACT FROM AUTHOR]

Surface-Enhanced Raman Scattering (SERS) performance of filter paper (FP) loaded with gold nanoparticles (Au NPs) of three different size/shapes (spherical, triangular and star) were investigated. Spherical Au NPs were synthesized using femtosecond laser ablation of Au target in distilled water and other two anisotropic (triangular and star-shaped) Au NPs were prepared by colloidal chemical methods. COMSOL Multiphysics simulations were performed to investigate near field distributions of these Au NPs and as expected, the strongly enhanced near-field intensity at the sharp features was observed. The SERS performance [using the dye molecule Nile Blue (NB)] of star-shaped Au NPs loaded FP was superior compared to the triangle and spherical Au NPs loaded FP due to the presence of sharp tips and thus it was proved to be capable of detecting 10 pM NB concentration with an estimated enhancement factor of ∼3.7×1010. [ABSTRACT FROM AUTHOR]

The very high theoretical capacity of the silicon (4200mAh/g more than 10 times larger than graphite), environmental-friendly, abundant and low-cost, makes it a potential candidate to replace graphite in high energy density Li-ion batteries. As a drawback, silicon suffers from huge volume changes (300%) on alloying and dealloying with Li, leading a structural deformation that induces disruption. The use of nanostructured silicon materials has been shown to be an effective way to avoid this mechanical degradation of the active material. In this paper the synthesis of silicon nanowires, grown on a highly porous 3D-like carbon paper substrate by CVD using Cu as the catalyst, is presented. The use of carbon paper allows to achieve remarkable loadings of active material (2-5 mg/cm²) and, consequently, high capacity densities. The silicon electrode was investigated both morphologically and electrochemically. To improve the electrochemical performance various strategies have been carried out. It was observed that a very slow first cycle (C/40), which helps the formation of a stable solid electrolyte interphase on the silicon surface, improves the performance of the cells; nevertheless, their cycle life has been found not fully satisfactory. Morphological analysis of the Si-NWs electrodes before and after cycling showed the presence of a dense silicon layer below the nanowires which could reduce the electrical contact between the active material and the substrate. [ABSTRACT FROM AUTHOR]

Due to high concentrations of organic matters and total solids, the effluent generated from recycled paper mill (RPME) requires appropriate treatment prior to discharge. The thermal condition of an anaerobic system has a major effect on the biodegradation processes of total solid substrates. In this study, the biodegradation of RPME was evaluated in a modified anaerobic inclining-baffled reactor (MAI-BR) under sub-mesophilic (29 °C), mesophilic (37 °C) and thermophilic (55 °C) conditions. The concentration of VSS, TDS, TSS lignin and VSS/TSS ratio in MAI-BR’s compartments were studied. The results showed that Compartment 1 had TSS of 15682, 13305 and 12145 mg/L; particles size of 621, 559 and 500 µm; VSS of 9662, 1776 and 10923 mg/L; and TDS of 594, 730 and 1873 mg/L at sub-mesophilic, mesophilic, and thermophilic conditions, respectively. An increase in the reactor temperature, an overall reduction in TSS and particles size, and an increase in VSS, VSS/TSS ratio, TDS, and lignin were observed. Under thermophilic conditions, the VSS/TSS ratio was higher than in mesophilic conditions, while lignin became harder to remove. These results conclude that operating the reactor at thermophilic has reduced the digested sludge within the system and enhanced the solid fraction biodegradation process of RPME. [ABSTRACT FROM AUTHOR]

The STEAM interdisciplinary integrated-thematic curriculum with engineering design is the main concept of the 12-year basic education curricula of Technology. This research is based on the engineering design orientation as a teaching strategy, developing project for paper mechanism, and implementing Living Technology courses for gifted high school students in Taiwan to test the teaching effectiveness. In the project, students need to integrate the theory, using engineering design process methods, performing work prediction and evaluation, prototyping experiments and trial work, and finally optimizing the work and improving the design. The results of the present study facilitate us get deeper understanding of the practical implementation and engineering thinking skills of gifted students. Suggestions based on the results were generated to improve the future Living Technology curriculum. The findings in this study serve as a reference for the future design, development, and implementation of STEAM curricula. [ABSTRACT FROM AUTHOR]

In various fields of computer science the word meaning has been explored. In various fields such as Smart Environment, Distributed Computing and Contextual Consciousness, context conscious devices are in popularity. Context Aware System is the new path towards the technology in Mobile Computing. This is a portable computing component where mobile apps can detect spatial data (e.g. User Place, Period of Day, nearby people, locations and user activities). Now in the era of Mobile Computing, recently we have seen the new developments in Apple iPhone-5 and Samsung Galaxy Note where they have application of Context aware System but it is not that what we call a "Killer App". Context conscious System is an old field but a rich field of research. In this paper, the difficulties and possible solutions are discussed which can serve as guidance to the developer or a researcher hoping to make an efficient Context Aware System a reality. [ABSTRACT FROM AUTHOR]

Electrophotography is a process of digital printing in which master is stored and processed as a digital file. This process was invented by Chester Floyd Carlson who was an American physicist. Various developments in this process have resulted in improved print quality. Depending upon the type of toner used, Electrophotography can be classified into two types: 1) Liquid Toner Electrophotography 2) Dry Toner Electrophotography. Toner particle size of Dry Toner Electrophotography is equal to or larger than 5 µm and that of Liquid Toner Electrophotography is equal to or smaller than 2 µm. This study was conducted to analyze the print quality of Liquid Toner and Dry Toner Electrophotography process on the basis of Print Contrast and Dot Gain. Good Print Contrast represent good details in the shadow area. Low Dot Gain helps in controlling unintentional density increase resulting in reproduction of halftone details appropriately. This study was conducted on presses using Liquid Toner and Dry Toner Electrophotography Technology for generating prints. HP Indigo 5600 was used for Liquid Toner Electrophotography prints and Xerox Versant 2100 was used for Dry Toner Electrophotography prints. Prints were taken on Gloss Coated Paper having grammage of 200 GSM. Total 100 (50 each) sheets were printed using both technologies. X-rite exact Spectrophotometer was used for analyzing the results. For this study, Print Contrast is measured at 80 % tonal value and Dot Gain is measured at 50 % tonal value. Results of this study shows that Print Contrast of Cyan, Magenta and Yellow color is lesser and that of Black color is higher for the samples printed by Liquid Toner Electrophotography. Dot Gain of Magenta and Black Color is lower and that of Cyan and Yellow color is similar for the samples printed by Liquid Toner Electrophotography. Consistency of Print Contrast and Dot Gain is higher for the samples printed by Liquid Toner Electrophotography. [ABSTRACT FROM AUTHOR]

Groundwater contaminated with arsenic poses several health risks to humans. It is necessary to monitor arsenic levels in water sources periodically. Microfluidics-based lab-on-a-chip systems are miniaturized, cost effective analytical tools that can be used to detect a variety of chemical and biological compounds. Herein, we report the development of a paper-based sensor using gold nanoparticles for the detection of arsenic levels as low as 5 ppb. The amount of colloidal solutions of gold nanoparticles required for analyzing a few microliters of samples is very low further reducing the costs. The limit of detection of arsenic was substantially extended in the study by capturing images after magnification via Foldscope, a pocket microscope. [ABSTRACT FROM AUTHOR]

Severe Environmental problems arises across the world due to accumulation of paper waste as landfills large quantity of resources are being utilised by the construction sector, creating a huge demand for construction materials. This paper presents an experimental study carried out by utilising waste paper in concrete Bricks which is a new innovation composite material. An experimental study on compaction strength, weight, water absorption characteristics subjected to sun dried and water curing methods of casting were studied in details. It was observed that usage of paper in concrete has good strength, toughness, has reduction in weight of the brick considerably and also had a low thermal conductivity. [ABSTRACT FROM AUTHOR]

A manufacturing system is a collection of equipment and human resources integrated to carry out the operation process into a quality finished product. With various activities in it making the production process one of the spearheads of creating a product in accordance with market needs, it is necessary to have a systematic, effective and efficient workflow to optimize the workstation at production time. PT XYZ manufactures carton boxes of various sizes. Cardboard paper as raw material is obtained from several other paper mill companies. PT XYZ has an imbalance of production efficiency which is a bottleneck (stacking) at the manual stitching workstation that is the carton box's union with the stapler. Based on the existing problems, this study aims to determine the process of producing carton boxes and identify workstations that experience bottlenecks. The estimate production demand and be careful to minimize congestion to optimize work efficiency at workstations in the production process and compare repair costs conducted. The data obtained will be predicted using quadratic forecasting to determine the shadow of future requests. The method used to minimize congestion and handle work efficiency at each workstation is Theory of Constraint (TOC). With the Theory of constraint method, the percentage of loads experiencing congestion is 105.89%. After the best choice is made by adding 1 operator to the connection process, the percentage of loads experiencing congestion is 70.59%. So, the bottleneck condition is solved, and production runs smoothly. [ABSTRACT FROM AUTHOR]

We are now entering a new era of development, such as the Web of Things (IoT). IOT is a cloud-based "complete overall neural framework" that connects numerous devices. The Internet of Things (IoT) is a collection ofcleverly connected devices and structures that include smart machines that interact and communicate with other machines, circumstances, things, and establishments, and advances in radio frequency identification (RFID) and sensor technology will help to address this new problem. People, programming structures, and diverse machines willshare information about the scenario and the surrounding state with IoT-enabled devices. The world will become more intelligent in every way as the Internet of Things advances. However, in the great majority of countries, internet access is only available to people who have access to computers. [ABSTRACT FROM AUTHOR]

Let G (V, E) be a simple graph with p vertices and q edges. Let φ: V (G)→Z5 – {0} be a function and φ*: E(G)→Z4 defined by φ * (u v) = ⌈ φ (u) φ (v) ⌉ (modulo 4) where φ (u) ≥ φ (v).. If | v φ (i) − v φ (j) | ≤ 1 , 1 ≤ i , j ≤ 4, i ≠ j and |e φ (k) - e φ (1) | ≤ 1 , 0 ≤ k , l ≤ 3 , k ≠ l then φ is quotient-4 cordial labeling of G, where vφ(x) and eφ(y) denote the number of vertices labeled with x and the number of edges labeled with y. Here some unicycle graphs such as cycle graph, dragon graph, and crown graph are proved to be quotient-4 cordial graphs. [ABSTRACT FROM AUTHOR]

Excessive use of paper waste during the general elections is a consumptive behavior and can damage the environment. In the 2018 Pilkada, there were 54 million unused ballots due to the lack of public participation in each Pilkada. In addition, various ballot manipulations make reduced data integrity. The Custom E-Voting Application is an electronic voting system application for general elections with the application of Blockchain technology to increase security using the Hyperledger Fabric and Hyperledger Composer platforms. The application of this technology can replace conventional paper-based voting systems and databases. This application uses a distributed database so that the database is more secure and maintained its integrity. The results of E-Voting can be seen by voters so that transparency for voters. This application can be implemented in several elections that require transparency of the results with the election time can be set as needed. The problem that is the focus of this research is the proof of the concept of blockchain technology with existing tools and system performance testing. It is hoped that the results of this research can provide an overview of the viability of blockchain technology to handle cases such as the general elections that are critical, massive, and simultaneous. [ABSTRACT FROM AUTHOR]

One method is to cover sliding components with materials that have low friction and wear characteristics. Surface functionalization is a fast-growing field emerging subject, owing to the need for surface modification being less expensive than designing and manufacturing a whole new material, and allowing the retention of some characteristics of the initial material, such as mechanical properties. Coatings are used as an alternative in the machining process to extend tool life, improve product surface quality, and speed up production. Multilayer coatings are particularly appealing among coating design concepts because they provide for more flexibility in tailoring surface qualities. For tribological performance improvement, the ability to regulate residual stress, hardness to elasticity modulus ratio, and substrate adherence, for example, by stacking coating layers, is advantageous. In this context, multilayer coatings have sparked a surge of interest as a feasible option for minimizing friction and wear. This paper looked at the properties of multilayer coating systems for tribological applications. The purpose of this work is to investigate the performance of coated tools in the machining process. Multilayer coating, nano-coating materials, and cutting tool are some of the terms used in this paper. [ABSTRACT FROM AUTHOR]

This article describes an information system for filing and presenting graduate qualification papers of university students. It was developed using HTML5, PHP 7.2, MySQL 5.7, JQuery, AJAX, Yii2 and Materialize frameworks. The main qualities of the system on the part of student contribution were evaluated using a questionnaire method among 124 respondents who took part in it. This paper presents the results of the data analysis and specifies the tools used in designing a system for the university. It also describes the modules and algorithms of the information system operation: the management of the system users, the organization of control and checking of the works by the department staff. It shows a practical use of the system in the learning process in 2019-2021. Further development of the system is to develop a more automated system to monitor the work of the departments and to make up analyst queries for punctual data entry of graduate qualification works. [ABSTRACT FROM AUTHOR]

Cancer is the uncontrolled growth of new cells beyond the normal limits. The process by which cancers invade and spread to the other organs is called metastasis, this condition became the leading cause of death. One of detection methods that are currently used to detect tumors and metastatic tissues is conducted with radiopharmaceutical of [18F] fluoro-2-deoxy-2-D-glucose ([18F] FDG). This method is quite accurate, but is relatively expensive because it needs PET / CT camera that is still limited in Indonesia. Therefore, this study was conducted to develop other imaging methods using SPECT-CT camera that is cheaper and easy to reach especially for developing countries. Labelling 2-deoxy-D-glucose with technetium-99m (99mTc) indirectly using diethylenetriaminepentaacetic acid (DTPA) as a co-ligand / bifunctional agent has been carried out. The determination of the optimum conditions for the labelling of 99mTc-DTPA-DG were done by varying the amount of reducing agent (SnCl2.2H2O), ligand (2-deoxy-D-glucose), pH, and incubation time. Radiochemical purity of 99mTc-DTPA-DG was determined by ascending paper chromatography and electrophoresis paper. The results showed that the labelling optimum conditions of 99mTc-DTPA-DG was achieved by the number of ligand 2-deoxy-D-glucose as much as 2 mg, co-ligand DTPA 750 µg, 50 µg SnCl2.2H2O, the reaction takes place at pH 6 with an incubation time of 30 min at room temperature. 99mTc-DTPA-DG has a radiochemical purity of 93.16±1.31% and the electrophoresis results showed that there is a difference between the peaks of 99mTc-DTPA-DG with other impurities including 99mTc-DTPA. [ABSTRACT FROM AUTHOR]

Floods in Malaysia are described as flash floods and monsoon floods by the Department of Irrigation and Drainage (DID). Forecasting is a specialized form of predictive analysis used to predict future trends or behavior from existing data. Weather forecasting predicts the weather in the future from current data circumstances. As flood forecasting models become more accurate, however, their capacity to accurately predict flooding decreased as the forecast continues. Therefore, to understand the different techniques used to forecast flood levels, a systematic review of the literature was conducted. This paper's main objective is to examine the most common variable used to forecast floods, utilizing the systematic review technique. From the main focus, we can identify the research questions, such as the most commonly used prediction method and its accuracy. In the end, two of the most common variables used for flood forecasting are rainfall and water level. This study's data can help others forecast floods using standard variables that yield the best accuracy possible. [ABSTRACT FROM AUTHOR]

The Box-Cox (BC) transformation is widely used in data analysis for achieving approximate normality in the trans-formed scale. The transformation is only possible for non-negative data. This positiveness requirement implies a truncation to the distribution on the transformed scale and the distribution in the transformed scale is truncated normal. This fact has consequences for the estimation of the parameters specially if the truncated probability is high. In the seminal paper Box and Cox proposed to estimate parameters using the normal distribution which in practice means to ignore any consequences of the truncation on the estimation process. In this work we present the framework for exact likelihood estimation on the PN distribution to which we call method m1 and how to calculate the parameters estimates using consistent estimators. We also present a pseudo-Likelihood function for the same model not taking into account truncation and allowing to replace parameters μ and σ for their estimates. We call m2 to this estimation method. We conclude that for cases where the truncated probability is low both methods give good estimation results. However for larger values of the truncated probability the m2 method does not present the same efficiency. [ABSTRACT FROM AUTHOR]

Borassus flabellifer L. becomes one of the palm-based commodities in Indonesia that can grow well in dry areas, especially around the north coast of Java Island. An abundant waste of this plant, in the form of leaf midrib and fruit fiber, has a potential as a source of lignocellulose for the paper industry. In the present study, Kraft paper production was conducted to know the influence of the proportion of leaf midrib and fruit fiber of Borassus flabellifer L., and the concentration of Polyvinyl Acetate (PVAc) adhesives on the sensory and physical quality of Kraft paper. The research method was a Randomized Block Design (RBD) with two factors. The Friedman test was used to determine the sensory quality of Kraft paper. The ANOVA analysis was used to examine the physical quality of Kraft paper. The results showed that the treatment of raw material proportion and PVAc adhesive concentration had significant effect on color, surface texture, yield, and tensile resistance, but insignificant between treatment of Gramatur and tear resistance. The best treatment of sensory tests was Kraft paper with proportion of 50% leaf midrib pulp, 50% fruit fiber pulp, and 7.5% PVAc adhesive concentration. It has a yield value of 72.11%, Gramatur of 162.80 (g/m²), tensile strength of 1.70 (%), and tear resistance of 197.6 (gf). [ABSTRACT FROM AUTHOR]

In order to accommodate the country's growing population, the number of apartment complexes has increased dramatically. Most new apartment complexes include a variety of modern amenities such as a supermarket, a medical centre, EV charging stations, vending machines, and many more. To use these amenities, we normally need to have a credit or debit card, or even cash on hand. Also, there are numerous identity and government cards that a person must carry with them at all times. Keeping track of all these cards can prove to be quite tedious and time-consuming. Furthermore, the majority of these apartments feature the standard lock and key method of unlocking the doors of the residing occupants which adds to the load of carrying about house keys along with all of the other cards. Life would be so much easier if we could replace all of these numerous bank cards with just one. Using a single card to access all services, such as EV charging or purchasing items, and even as your home door key. With the tap and go feature, the user does not have to pay at the same time but can make a payment all at once when the statement arrives at the end of the month, saving both time and keeping track of all transactions with ease. Hence, we propose in this paper a smart card that uses RFID technology to access all of the many amenities in apartment complexes. [ABSTRACT FROM AUTHOR]

The paper describes a smart home control system, which includes lighting, microclimate and security subsystems, as well as control algorithms for various operating scenarios. The process of the system operation is described in detail, the visualization of the system is presented in the form of a 3d model. The article shows the practical significance of the system, describes its functionality. The work is of undoubted relevance, since the introduction of a house management system can improve conditions of life and achieve high energy efficiency rates. The article presents in detail each element of the control system, namely: a control device, a control object, a set of sensors. On the example of the lighting subsystem, the process of creating the entire automated control system is described. An algorithm for automatic lighting operation is obtained and described. To control the system, a human-machine interface was developed in the OpenHab program. A panel with indicators of the light sensor is presented, its functionality is described. [ABSTRACT FROM AUTHOR]

Five fuels were tested in a common rail direct injection (CRDI) diesel engine to see how they affected soot particle distribution and the engine's controlled and unregulated emission characteristics (M15, M25, and M35). The findings demonstrated that regulated emissions of carbon monoxide (CO), hydrocarbons (HC), and particulate matter (PM) could be efficiently controlled to a very low level when mahua oil biodiesel (MOB) in diesel was utilized in conjunction with ideal engine working situations. Paper filters were employed to remove diesel dust. Entire particulate matter main particles were < 100 nm in width, with the average diameter for the biodiesel mixes falling among 20 and 26 nm. PM particles had uncontrolled emissions including Pb, Mn, and Ba, while M100 had 56.72% fewer xylene emissions, 22.49% fewer toluene emissions, and 19.45% fewer benzene emissions compared to M0. As a result, MOB is a wonderful option for reducing pollution from diesel engines and other sources, both in the form of controlled and unregulated emissions. [ABSTRACT FROM AUTHOR]

Neo vernacular is a modern architectural style inspired by traditional vernacular buildings. The concept of neo vernacular architecture is a continuance of the Klaten people's ancient identity as part of Javanese culture, particularly in Central Java. One technique to construct architectural works founded in the local culture is to look for values rooted in Javanese culture. This paper is the product of a final project whose goal is to develop a sustainable architectural identity in Klaten based on local wisdom, which will be applied to the "nadir" transit hotel. This transit hotel should be able to accomplish the goal and objective of a successful Klaten city with devoted, intelligent, autonomous, and cultural citizens. The location, 53 meters south of Klaten Station, is one type of development of supporting facilities for the commuter line scheme. This is one of the KAI activities at Klaten Station that attempts to make it easier for visitors to obtain long-term support. Folk architecture gives rise to vernacular architecture, which evolves from it. It arose from and was entrenched in the ethnic community's traditions, and skilled craftsmen built it with years of expertise. The gunungan and Klaten limasan house concept is an alternative that is integrated with contemporary design to create a transit hotel with a character that may reflect the city of Klaten's identity as an independent and cultured district. [ABSTRACT FROM AUTHOR]

The advancement of multimedia made Technology for digital Video Watermarking is becoming widely recognized as a crucial tool for copyright enforcement, thus it identifies the video content and discourages unauthorized users from accessing or using it. New watermarking algorithm is presented in this paper the digital video based on landmarks of faces, landmark of a face is localized of certain characteristic points on the face, which made these marks an optimal host. Embedding the secret message in video frames will be used the Least Significant Bit (LSB) technique which slightly changes in the video. confidentiality is improved by encrypting the watermark before embedding it in the video frames with the SALSA20 Stream, which increases the watermark's security and power, The results of the experiments show that the suggested algorithm achieves significant imperceptibility and excellent resistance to different attacks. Peak to Signal Noise Ratio (PSNR) is higher and of higher quality in the attached video. According to experimental findings, the suggested algorithm achieves great resilience to several forms of attacks. Four statistical measures are used to evaluate the proposed algorithm, they are: Uses Peak Signal Noise Ratio (PSNR), Signal-to-noise ratio (SNR),Mean Squared Error (MSE), and Normalized Cross-Correlation (NCC), and the results are satisfied. The suggested algorithm achieves great resilience to several forms of attacks, also an acceptable level of transparency is obtained present in the embedded version. [ABSTRACT FROM AUTHOR]

The present researchers are trying to enhance the properties of paper sheet that used widely in many fields such as printing and packaging. The enhancement of paper quality is also possible to preserve paper documents of all kinds, as they are the true record, full of the history, achievements of the human being and the intellectual and cultural of the country. It is possible to improve its physical and mechanical properties and preserve them from damage through the use of some solutions of polymeric adhesives, which act as protective barriers against water and moisture penetration. The paper also has the advantage of porosity, which has been overcome by using three types of polymeric adhesives (Nitro Cellulose, Polyvinyl alcohol acetate, and Poly methyl methacrylate, as it formed a transparent layer, that led to an increase in thickness, hardness, ability to withstand folding and tensile, and a decrease in the intensity of brightness, as polymeric solutions showed their superiority in resisting moisture. [ABSTRACT FROM AUTHOR]

Fake news is false or misleading information presented as news. False stories tend to spread farther, faster, and more broadly than true stories. Some individuals and organizations intentionally applied misleading information for certain benefits. The internet goes quickly, mobile devices became popular, and social media users grow more significant in number, make no boundaries world and connect every user. As a result, information circulates in immense numbers makes to handle fake news manually is impossible. Fake news also affects human psychology. Hoax related to how to cure COVID-19 and the lack of toilet paper has led to casualties and riots. Fake news potentially differs in writing technique compare to real information. In this paper, we discussed a few studies related to fake news detection. Their algorithm can capture writing style in content viz lexicon, syntax, semantic, and discourse. Also, those studies implemented user-based, content-based, and social context-based. It used machine learning, deep learning, and reinforcement learning. Furthermore, education plays a vital role in making people understand the impact of fake news. Itis necessary to do a campaign for all internet users. The national government necessity collaborates with society implement the particular rule for better internet environment. [ABSTRACT FROM AUTHOR]

"Virtual is Reality". Human beings always want to achieve more and more, want to explore more and more. Whether it is an area of Medical Science, Automotive, History Science, or Universe. We are presenting this paper to explore the Digital World's main areas called the Metaverse. Since 2020 during and post-COVID digitization keep pace in almost all domains and now it is part of human life starting with Online New papers to online classes / online medical consultancy, online payments, and many more. COVID restricts human beings, especially tour tourism & traveling, Metaverse is one of the key mantras which make it possible for a human being to travel anywhere without leaving his/ her place. But, does Metaverse has also any restrictions? Does Metaverse have any rule/regulation/policy framework on usage? Does Metaverse meet the service quality? [ABSTRACT FROM AUTHOR]

This article summary a comparative analysis of Hot Rolled Steel (HRS) Sections and Cold formed steel (CFS) Sections for Industrial Buildings based on a literature review. In this study the materials used are other than hot rolled for the analysis of the structure. CFS structures are becoming increasingly popular due to their numerous benefits, including light weight, quick construction, and so on. CFS analysis, design, and production processes are all being improved on a regular basis. This report is based on a recent study on HRS (HRS) and (CFS) that will aid future research and advances in the construction industry. [ABSTRACT FROM AUTHOR]

This study aims to determine the feasibility, improvement and differences in improving science process skills after the application of Pedagogical Content Knowledge (PCK) on the elasticity of solid state. This research used quasi experimental method with Nonequivalent Control Group Design. The study population was students of class XI SMAN Jatinangor, with a sample of two classes, namely XI MIPA 6 as the experimental class and XI MIPA 2 as the control class, each of class consist of 30 students who were selected using purposive sampling technique. The instruments used were CoRe, PaP-eRs, AABTLT with SAS and questions of science process skills. The average acquisition value of the CoRe instrument on the elasticity of solids is 91.7 with the PCK maturing category or level 3. The average N-Gain in the experimental class was 0.55 in.the medium category and the control class was 0.30 in.the moderate category. [ABSTRACT FROM AUTHOR]

Fire-fighting robots are the human-established machines to keep people alive, as the accidents that occur during the procedure of stopping the fires are uncountable. This main function of the robot is to automatically sense fires and shift against the fires to finish it with water by keeping a safe distancing from it. A programmable raspberry pi can completely control the movement and actions of this device. This device must move right, east, front and back in the shape of a car to locate and quench the fires. An infra-red camera and thermal camera is used in this fire-fighter robot. The thermal camera attempts to monitor the flames, temperature and the infra-red camera, offering pictures of the view of the night, which record the whole extinction period directly. This live capture can be seen in a PC file which is also accompanied by a log from the computer. [ABSTRACT FROM AUTHOR]

Welding of the two metal are become advance with technological innovation. Fusion method of the material is also incorporated in the welding of the aluminum, specially die casted aluminum A number of the experiment had been done to find out the best way to weld the aluminum and method come as the friction stir welding (FSW). The optimize condition were created for the welding and analyzed to check it the problem associated with the aluminum welding. the result for the condition is come out as optimum condition will have depended upon the down force of the plunge tool. During the analysis of the welding three different conditions have been notify as first condition was related with excess of the passing heat which results in the more flash mass and second one is produced when the proper heat is not passing to the work piece and formed a cavity and last one is cavity formation due to abnormal melting of the metal. The tool plunges down force effect is low for this aspect of defect, although the magnitude of the imperfection due to inadequate heat contribution decreases meaningfully as the down force increases. [ABSTRACT FROM AUTHOR]

The micro-fibrillated cellulose crystals from natural cotton fiber via alkaline treatment and acid hydrolysis were explored as possible reinforcement in recycled paper to improve its mechanical properties. Results confirmed the characteristic properties and crystallinity of the obtained micro-fibrillated cellulose crystals. Reinforcement of the micro-fibrillated cellulose crystals in the production of recycled paper showed an improvement in the tensile strength compared to the recycled paper samples without reinforcement or even with kapok fiber/micro-fibrillated cellulose crystals combination. Further improvement on the barrier properties of the micro-fibrillated cellulose reinforced paper via biocoating made from chitosan/starch blend resulted to a 27.69% decrease of the water absorption capacity compared to uncoated sample using the Cobb test. [ABSTRACT FROM AUTHOR]

During recycling of waste paper from private households different fractions containing plastics and polluted paper fibers are received. Current research at the Institute of Polymer Materials and Plastics Engineering at Clausthal University of Technology showed that the use of waste paper as filler and reinforcement in polypropylene leads to nearly the same mechanical properties as natural fibers like flax, sisal and hemp. The present investigations focus on the chemical cleaning of the paper recyclate to treat the fiber surface and to solve foreign plastics like polystyrene. For this purpose Soxhlet extraction with different solvents is used. The received extracts are examined via infrared spectroscopy, as well as the treated and the untreated fibers. Afterwards, the cleaned paper is incorporated into polypropylene. The received composites are investigated regarding their mechanical properties by tensile testing and CHARPY impact testing. [ABSTRACT FROM AUTHOR]

Synthesis of heteronuclear complexes of Fe(III)-Mn(II)-Tartrate is reported here. The tartrate based heteronuclear complex was developed as functional material for catalytic applications and molecular magnets. Effect of type of Fe(III) salts and reaction temperature in the solvothermal synthesis of the targeted complex is also investigated. FeCl3 and (NH4)Fe(SO4)2 were used as the source of Fe(III) salts, in which the Fe(III) salt solutions were then mixed with solutions of MnCl2 and L−tartaric acid in a Fe(III)-Mn(II)-Tartrate mol ratio of 2:2:5 in a 50 mL of Teflon-autoclave. A mixture of dimethyl formamide and distilled water (1:3) was used as the solvent. The solvothermal reaction was done at 110 and 130 °C, respectively, for 2 hours. Solids that precipitated out from the reaction were separated by filter paper, dried in an oven, and then characterized by Fourier Transform Infrared (FTIR) spectroscopy, atomic absorption spectrophotometer (AAS), and powder XRD analysis. Experimental data shows that all four reactions resulted in identical pale yellow-greenish fine powder in different yields. FTIR analysis confirms the presence of tartrate ligand based on specific absorptions, namely a broad band around 3400 (O–H) cm−1, a sharp peak around 1650 (O–C=O) cm−1, and twin sharp peaks around 1400-1100 (C–OH) cm−1. Moreover, AAS confirms the presence of both Fe and Mn in all samples in a considerably significant amount. Powder XRD analyses confirmed that the synthesized complexes have identical crystal system. These results indicate that complexes of Fe(III)-Mn(II)-Tartrate were formed and the synthesis of the complex were not influenced by the type of Fe(III) salts or by the reaction temperature. [ABSTRACT FROM AUTHOR]

Cognitive Radio (CR) is an emerging technology for efficient use of spectrum resources, to make it more energy-efficient there is a need for energy harvest cognitive radio networks (EH-CRN). In EH-CRN energy harvest uses ambient energy sources, but the random nature of sources makes the implementation of EH-CRN more difficult. Extensive research is conducted in the past few years to address the issues in the implementation of EH-CRNs. This paper reviews the previous and recent improvements in EH-CRNs and systematically presents the merits and demerits of each. Finally, this review paper is presented to help new researchers and to make them familiar with the concepts of EH- CRNs. [ABSTRACT FROM AUTHOR]

In recent years, the inclination toward eating out has become a prime choice everywhere. It is the result of working parents, micro family, and disposable income. People are looking for a good time to spend and relax. Resulting in many new hotels and restaurant are coming up day by day. In this competitive environment, restaurants are suffering from low business and find it difficult to survive in the market. Restaurant management is not able to identify the drawback of its products, services, and is thriving for new strategy and development. Therefore, this paper aims to find out various customer satisfaction practices existing in the catering industry and its effect on customer satisfaction and retention. This is a review paper using secondary data analysis based on various published journals, articles collected from various leading journals in the field of hospitality and tourism. The findings of the paper are factors such as food quality and authenticity, personal touch, physical ambiance, and value for money,staff behavior. [ABSTRACT FROM AUTHOR]

Owed to the enormous advantages like easy disposable, flexible and low cost, eco-friendly performance of paper substrate, microfluidics has expanded a new attention on the flexible substrate in the research field of environmental monitoring, medical diagnosis and food safety analysis applications. Diverse properties of paper and fluid transport mechanism on paper substrate are some crucial facilitating parameters which are used on the fabrication of functional flexible microfluidic device applications in an effectual and analytical way. Transport of any fluids on paper substrate does not require any external force because of the capillary action behavior on paper surface. When drops of fluid at the first time touch the paper substrate surface, it penetrates the paper surface radially. Radial capillary transport used in our daily life using different circumstances such as when ink, water and wine spreads in paper or cloths, rain drops in soil, and dye into yarn. Here, the attention/foundation of work is fluid transport on the texture of WhatmanTM grade 1 filter paper which is commonly used in microfluidic applications as claimed by the previously published articles. In this work, an experimental study is presented on capillary transport in radial direction to understand the texture of the WhatmanTM grade 1 filter paper substrate. [ABSTRACT FROM AUTHOR]

An innovation in paper technology that is totally different from the papermaking technology that has been known now, has been found in the 21st century in China. This new discovery paper does not use cellulose fibers as its raw material, and does not use water at all in its production process. Because it is made of inorganic mineral coming from calcite rocks, this paper is called 'rock paper' or stone paper. The process of stone papermaking in principle mixes fine powder of calcite rock with non-toxic resin, one of which is HDPE (high density polyethylene), as well as other additives, then melted at high temperatures and formed into a sheets like paper. The properties of stone paper are very similar and even have advantages compared to conventional paper. This type of paper is claimed to be more environmentally friendly than conventional paper because it does not use plant fibers as raw material, which means there is no trees cut. It can be recycled and produces low greenhouse gas emissions. [ABSTRACT FROM AUTHOR]

In the history of human civilization, the material used to create money has changed in conjunction with the advancement of knowledge and the complexity of human life. This study aims to explore the material evolution of money creation as a medium of exchange. The study used a literature review approach to gather information from the Google Scholar, Mendeley, and ScienceDirect databases. This study reveals that human transactions begin with the exchange of goods (barter) and continue with the exchange of goods with agreed-upon valuable commodities (commodity money). The materials used to create money has evolved along with it, starting with gold and silver coins, paper money, electronic money, and cryptocurrencies. The first two are still in use and require materials in creation, whereas the following two are no longer require physical materials in its issuance. Furthermore, money, in all of its physical manifestations, cannot be replaced as a medium of exchange in the present or the future, and its function will continue to expand. [ABSTRACT FROM AUTHOR]

The pulp and paper making industry is looking for new main raw material based on its physical, chemical and morphological characteristics. Currently in this industry, bagasse is the most useful raw material in pulp and paper industry. The objective of this study is to determine its suitability for pulping. Acacia auriculiformis is a fast-growing tree normally found in Indonesia and Australia. Acacia auriculiformis leaf contains of cellulose, hemi-cellulose and lignin. The range of lignin content in Acacia auriculiformis is 19%-20%. The hemi-cellulose and lignin contents was removed by soda-pulping process using different concentrations as followed; 3%, 5%, 10%, 15% and 20%. In order to determine the optimum pulping conditions for Acacia auriculiformis craft paper, several tests were conducted such as apparent density, tear test, tensile strength test and moisture absorption. It was found that the Acacia auriculiformis fibre treated with 3% sodium hydroxide (NaOH) solutions gave good tear test of the paper. For apparent density test, the best concentration of NaOH used for treating Acacia auriculiformis pulping is at 15%. From the study, the optimum concentration of NaOH in treating Acacia auriculiformis fibre is at 5% for best result in tensile strength. Hence, from the overall tests, 5% concentration of NaOH is the optimum value. From the findings, Acacia auriculiformis fibre has a potential to be used in paper making and food packaging industry. [ABSTRACT FROM AUTHOR]

Background: COVID-19 has become a global concern as it has ended the lives of lakhs of people. The study done by. Lin proposed the results of an analysis of a theoretical computational model of epidemiology taking into account the crucial components such as response of an individual behavior, measures taken by government, rapid transmission and emigration of fever virus to a huge extent of human population. Simple model framework has been used by them to examine the requirements of essential elements.Problem: We claim the perfect validation of the assumptions stated for the purpose of modeling and its analysis, however, the analytical solution of the presented model is not discussed. And thus have a poor potential to make computational estimates.Methodology adopted: We have tried to present and validate the mathematical/analytic solution of the developed model, considering their assumptions.Conclusion: We have reached to the outcome that the work presented by Q. Lin should be demonstrated adequately with a cautionary advice of not to consider the results and analysis of such numerical models.The current study proposed the results of an analysis of a theoretical computational model of epidemiology taking into account the crucial components such as response of an individual behavior, measures taken by government, rapid transmission and emigration of fever virus to a huge extent of human population. Simple model framework has been used by them to examine the requirements of essential elements. We claim the perfect validation of the assumptions stated for the purpose of modeling and its analysis, however, the analytical solution of the presented model is not discussed. The decision point of this work is to adequately demonstrate along with the cautionary advice of not to use the outcomes and analysis of such numerical models. [ABSTRACT FROM AUTHOR]

Robotic technologies are overgrowing with an improvement in their capabilities, such as "autonomy" and "mobility". The two main forces driving these advancements are economics and safety. Often referred to as the "three D's": Dirty, Dangerous and Dull, many tasks performed by humans are either dangerous, such as tactical reconnaissance, or highly repetitive, such as patrolling in an industrial factory. Autonomous Mobile Robots are often well suited to these tasks because they can be more consistent and relatively expendable. These robots have historically been designed to replace humans in these dangerous and dull tasks, which means they are designed with human-like capabilities. There is a growth in the development of intelligent systems based on mobile sensors due to increased demand for automated surveillance of indoor and outdoor environments, such as production plants, airports, warehouses, military etc. The fundamental optimization problems related to environmental map representation, localization, navigation, and surveillance tasks have been addressed entirely in most robotic surveillance schemes. [ABSTRACT FROM AUTHOR]