Search

Paper mill sludge (PMS) was assessed as cheap renewable lignocellulosic biomass for lipid production by the oleaginous yeast Cryptococcus vishniaccii (MTCC 232). The sonicated paper mill sludge extract (PMSE) exhibited enhanced lipid yield and lipid content 7.8±0.57g/l, 53.40% in comparison to 5.5±0.8g/l, 40.44% glucose synthetic medium, respectively. The accumulated triglycerides (TAG) inside the lipid droplets (LDs) were converted to biodiesel by transesterification and thoroughly characterized using GC-MS technique. The fatty acid methyl ester (FAME) profile obtained reveals elevated content of oleic acid followed by palmitic acid, linoleic acid and stearic acid with improved oxidative stability related to biodiesel quality., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

This work evaluates the environmental performance of using pulp and paper sludge as feedstock for the production of second generation ethanol. An ethanol plant for converting 5400 tons of dry sludge/year was modelled and evaluated using a cradle-to-gate life cycle assessment approach. The sludge is a burden for pulp and paper mills that is mainly disposed in landfilling. The studied system allows for the valorisation of the waste, which due to its high polysaccharide content is a valuable feedstock for bioethanol production. Eleven impact categories were analysed and the results showed that enzymatic hydrolysis and neutralisation of the CaCO3 are the environmental hotspots of the system contributing up to 85% to the overall impacts. Two optimisation scenarios were evaluated: (1) using a reduced HCl amount in the neutralisation stage and (2) co-fermentation of xylose and glucose, for maximal ethanol yield. Both scenarios displayed significant environmental impact improvements., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Polyamidoamine epichlorohydrin (PAAE) is a permanent wet strength resin used in papermaking. When applied to paperboard, some amount of resin is retained in the sheet, and some is lost to the white water. The papermaker usually knows the amount of PAAE charged to the pulp but has no idea how much chemical is retained in the sheet. In addition, the influence of PAAE dosage, freeness, zeta potential, and pulp kappa number variability on PAAE retention is not well understood. Factorial design experiments using unbleached and bleached softwood (loblolly pine) kraft pulps were conducted to understand the factors that affect PAAE retention. The results revealed that PAAE retention, wet tear index, and tensile index not only depended on the PAAE charged of the pulp but also depended significantly on the pulp freeness. In lieu of freeness, zeta potential data can be used to predict PAAE retention. In addition, at similar freeness, bleached pulp has the highest retention of PAAE compared to low and high kappa unbleached kraft pulps. The results also suggest that lignin may have potential as a wet strength agent.

Abstract Paper‐based devices have attracted considerable attention in point‐of‐care testing (POCT) due to their simple operation and portability. The performance of paper‐based POC assays is further enhanced by coupling with functional nucleic acids (FNAs), which are able to selectively recognize and bind to targets, amplify and transduce signals. Several high‐performance paper‐based POC assays have been developed, resulting from the different spatial structures of the paper‐based device and detection strategies using different FNAs. In this review, we first introduce FNAs and paper‐based devices, including their concepts, classifications and advances. The following section focuses on the application of these FNAs in POC assays using paper‐based devices, taking into account their spatial one‐, two‐ and three‐dimensional structures. Finally, the challenges and perspectives of the application of FNAs in paper‐based POCT are discussed.

Microfibrillated cellulose (MFC) was prepared from post-consumer old corrugated container (OCC) material, which was first disintegrated in water, cleaned to remove impurities, and then fibrillated by grinding. Those processed MFCs were treated with in-situ formation of calcium carbonate by adding calcium oxide and injecting carbon dioxide into the mixture up to the ratio of 1:40 (MFC : calcium carbonate) by weight. The MFCs had a dark brown color initially but turned into high brightness materials similar to commercial ground calcium carbonate (GCC) after the in-situ formation process. The MFCs that had calcium carbonate attached on their surfaces, which were lengthy and flexible, were called flexible calcium carbonate from OCC (FCCO). Paper containing FCCO gave higher bulk, higher stiffness, and higher tensile index without lowering smoothness when compared to the paper containing commercial GCC. However, brightness was slightly lowered because of initial low brightness of the OCC. This study also demonstrated the feasibility to substitute wood fibers up to 5% with FCCO without lowering essential properties for printing paper. Benefits of the waste paper are savings of both wood resources and production cost.

The influences of nano-chitosan and cationic polyacrylamide (cPAM) on the optical and mechanical properties of paper made from chemi-mechanical pulp (CMP) were investigated. Bleached chemi-mechanical pulp (CMP) was selected as the control sample. The cPAM was considered at four levels (0%, 0.25%, 0.5%, and 0.75%), while chitosan was added to the CMP suspension at three levels (0%, 1%, and 2%). Paper test specimens were prepared according to TAPPI standards with a basis weight of 60 g/m2, and their optical and mechanical properties were measured. The results indicated that the opacity, greenness, tear strength, burst strength, and Gurley seconds were increased, whereas brightness, water absorption, and a* factor were decreased by increasing the amount of cPAM. Adding chitosan to CMP increased the a* factor, tear strength, breaking length, burst strength, Gurley seconds, water absorption, and greenness in the resulting paper. When polyacrylamide and nano-chitosan were added simultaneously to CMP, the brightness, water absorption, and greenness of the resulting paper decreased, but opacity, burst strength, tear strength, and air resistance had an appropriate increase. In all treatments, the best results were found at 1% chitosan and 0.5% cPAM due to favorable optical and mechanical properties.

The effects of the pre-coating color formulation, dwell time, and coat weights of pre- and top- coating layers on print mottle of double-coated paper were investigated using an octave band filtering image processing technique. To investigate the effect of pre-coating color formulations, six types of coating colors were used. Mottle index and coefficient of variance (COV) of double-coated paper increased as the size of pre-coating pigment particles decreased, which was attributed to the reduction in relative pore size of the pre-coating layer. Decreasing the dwell time decreased transfer time from the coating head to dryer of a Maiyoh coater. As the transfer time to dryer decreased, the mottle index and COV increased because of uneven distribution of latex within the coating layer. Pre-coat weight was found to have a greater impact on print mottle than the top-coat weight.

This article substantiates the possibilities of replacing commercial wood with raw materials made from industrial hemp hurd (hemp-woody core) for the production of unbleached and bleached paper pulps. A comparative analysis of the mechanical characteristics of sheets of paper prepared in the Rapid-Köthen apparatus and obtained from pulp obtained from commercial wood and hemp-woody core (HWC) was undertaken. The objective of this study was to determine the effect of mechanical refining of a pulp on the production of microcrystalline cellulose (MCC) from HWC. It was shown that an increase in the pulp refining degree from 15 °SR to 83 °SR led to a decrease in the degree of polymerisation of MCC from 272 to 75, the hydrochloric acid concentration from 73 to 45.63 g/L, and the hydrolysis time from 120 min to 60 min. With the addition of 5% MCC obtained from hemp-woody core, the mechanical properties of laboratory paper sheets from HWC were improved until they met ISO 12625-4-2017 (2017) requirements for NS-2. The results obtained support using hemp-woody core for the production of MCC.

Abstract We report an innovative and facile approach to fabricating an ultrasensitive plasmonic paper substrate for surface-enhanced Raman spectroscopy (SERS). The approach exploits the self-assembling capability of poly(styrene-b-2-vinyl pyridine) block copolymers to form a thin film at the air-liquid interface within the single microdroplet scale for the first time and the subsequent in situ growth of silver nanoparticles (AgNPs). The concentration of the block copolymer was found to play an essential role in stabilizing the droplets during the mass transfer phase and formation of silver nanoparticles, thus influencing the SERS signals. SEM analysis of the morphology of the plasmonic paper substrates revealed the formation of spherical AgNPs evenly distributed across the surface of the formed copolymer film with a size distribution of 47.5 nm. The resultant enhancement factor was calculated to be 1.2 × 107, and the detection limit of rhodamine 6G was as low as 48.9 pM. The nanohybridized plasmonic paper was successfully applied to detect two emerging pollutants—sildenafil and flibanserin—with LODs as low as 1.48 nM and 3.45 nM, respectively. Thus, this study offers new prospects for designing an affordable and readily available, yet highly sensitive, paper-based SERS substrate with the potential for development as a lab-on-a-chip device.

Hydrogen peroxide is an environmentally friendly bleaching chemical that is widely used in alkaline media in the pulp and paper industry. In this study, unconventional reaction conditions of the conventional bleaching P-stage were performed to evaluate its effect on cellulose. The objective was to “tailor” the cellulose degradation according to different applications, such as dissolving pulps. Different operating conditions were studied: pH variation (alkaline or acidic medium), as well as the addition of Cu(II) or the Cu(II)-phenanthroline complex. The hypotheses considered were (1) Using H2O2 in unconventional conditions will favor hemicelluloses removal after depolymerization and will lead to the desired cellulose degradation, and (2) H2O2 oxidation carried out under unconventional conditions will favor the dissolving ability of cellulose.

Fold cracking, which reduces the economic feasibility of paper-making, is a localized surface deformation caused by extreme bending stress. Most paper products, such as base paper and coated paper, generate fold cracking during folding processing. To control fold cracking, the mechanical properties of the base paper can be strengthened, and the flexibility of the structure can be increased by controlling the modification in pulp fibers and stock preparation conditions. This study analyzed the changes in the mechanical properties of high-grammage paper in response to the addition of precipitated calcium carbonate (PCC) and cationic starch (C-starch). The application of inorganic filler (PCC) drastically reduced the internal bond strength and tensile strength, causing fold cracking, whereas C-starch increased the bond strength between fibers, which improved the tensile strength, internal bond strength, and elongation. However, when applied independently, fold cracking occurred because of extreme increase or decrease in strength. Therefore, the combined application of C-starch and PCC made it possible to form a paper-based structure with high fold cracking resistance. Moreover, when the fold cracking resistance was excellent, the mechanical properties were balanced without being biased in one direction even under conditions of relatively low mechanical properties.

Research into paper-based devices and ionic liquids has increased considerably in the past few years. Thus, the combination of paper-based devices with ionic liquids is also becoming an increasingly frequent research subject. However, the influence of the ionic liquid on the paper properties has been hardly considered. In this paper, the influence of a hydrophobic ionic liquid (1-butyl-3-methylimidazolium bis(trifluoromethyl-sulfonyl)imide) on the mechanical properties of laboratory paper, isotropic and oriented, made from eucalyptus sulfate and cotton linters, is investigated. The tensile strength, elastic modulus, and breaking strain of papers saturated with ionic liquid were about 60 to 90% of the dry paper characteristics. In contrast to water, the breaking strain did not increase in the presence of the ionic liquid. This is because the ionic liquid only slightly swelled the fibers.

The utilization of plant extraction products from Oeneanthe pimpinelloides (Apiaceae family) seeds were investigated in terms of their use as an insecticide control of packaging materials. The aim was to investigate their insecticidal effects against the flour beetle Tribolium castaneum. The Oeneanthe pimpinelloides seeds were extracted with methanol. By using the liquid-liquid extraction method, the hexane extract (II) was separated from the methanol extract (I) and hexane and methanol were evaporated. Then, the chemical composition of each sample was determined via gas chromatography–mass spectrometry. The methanol extract predominantly contained tetrahydrofuran, 1-methoxy-2-propanol, 1-methoxy, 2-butoxyethanol, 1-phenylethanone, cyclohexene carboxylate derivative, (3-phenyl-2-propynylidene) cyclopropane, diphenyldiazene, and dihydroxypropyl ester components, while the hexane fraction contained nonane, 1-octanol, decane, undecane, tridecane, alkyl benzene, benzene sulfonic acid, benzoxazine, and hexadecanoic acid components, as well as some derivatives of them. Each fraction was dissolved in DMSO for impregnation on filter paper. The insecticide effects of the paper samples were determined against Tribolium castneum. According to the results, the mortality started after 3 d for each fraction. After 4 d, the hexane fraction indicated total mortality in comparison with the methanol fraction, which showed partial mortality (3/5).

This study aimed to test the utility of ammonium persulfate (APS) oxidised nanofibrillated cellulose (NFC) as an additive for chitosan- and alginate-based biopolymer films that could eventually be used as paper coatings for food packaging applications. Sodium alginate and chitosan were used as the base for the films. Various concentrations of APS oxidised NFC ranging from 0% to 10% were used as a reinforcing agent, resulting in six combinations of either alginate-NFC or chitosan-NFC composite films. Biofilms were tested for their mechanical properties (tensile strength and strain), grease barrier properties, air permeability, water vapour permeability, and degradation in the soil. Overall, when using the ammonium persulfate oxidation pretreatment method, the best performance of the films was estimated with the addition of 2.5% NFC.

We present a low-cost, disposable microbial fuel cell fabricated on a paper based platform, having a start-up time of 10 s. The platform deploys ordinary pencil strokes for graphite electrode deposition. The device uses a membrane-less design in a one-time injection (OTI) mode or a continuous capillary driven flow mode (CPF), where oxygen from the atmosphere is used up at the cathode for water formation, leading to the generation of bioelectricity. The performance of the fuel cell is evaluated using two bacterial strains, namely, Pseudomonas aeruginosa IIT BT SS1 and Shewanella putrefaciens. This flexible device is shown to retain bacteria for a period of at least one hour, resulting in the generation of almost 0.4 V using P. aeruginosa and a maximum current of 18 μA using S. putrefaciens without the use of any additional catalysts.

The development of highly specific biomimetic recognition material is a challenge for rapid detection of harmful residues in foodstuff. In this study, a paper-based boronate affinity metal-organic framework/molecularly imprinted polymer microfluidic chip (FZS-BA@MIP) was constructed based on the in situ construction strategy, which was also designed as a highly specific biomimetic recognition module. Here, the homogeneous zeolitic imidazole framework-8 (ZIF-8) membrane served as a great scaffold and enrichment layer. Besides, the recognition layer of MIP was prepared based on a highly oriented boronate affinity surface imprinting strategy. With the aid of the liquid flow channel, the highly specific enrichment and visual detection for antibiotic residues like kanamycin in actual products were achieved on the paper chip module of an integrated lateral flow platform. The whole analysis process could be accomplished within 30 min. In brief, this study offered a new integrated biomimetic recognition platform for visually detecting harmful veterinary residues containing cis-diols, which demonstrated promising commercial value in point-of-care testing of foodborne hazardous compounds.

Nucleic acid quantification, allowing us to accurately know the copy number of target nucleic acids, is significant for diagnosis, food safety, agricultural production, and environmental protection. However, current digital quantification methods require expensive instruments or complicated microfluidic chips, making it difficult to popularize in the point-of-care detection. Paper is an inexpensive and readily available material. In this study, we propose a simple and cost-effective paper membrane-based digital loop-mediated isothermal amplification (LAMP) method for nucleic acid quantification. In the presence of DNA fluorescence dyes, the high background signals will cover up the amplicons-formed bright spots. To reduce the background fluorescence signals, a quencher-fluorophore duplex was introduced in LAMP primers to replace non-specific fluorescence dyes. After that, the amplicons-formed spots on the paper membrane can be observed; thus, the target DNA can be quantified by counting the spots. Take Vibrio parahaemolyticus DNA detection as an instance, a good linear relationship is obtained between the light spots and the copy numbers of DNA. The paper membrane-based digital LAMP detection can detect 100 copies target DNA per reaction within 30 min. Overall, the proposed nucleic acid quantification method has the advantages of a simple workflow, short sample-in and answer-out time, low cost, and high signal-to-noise, which is promising for application in resourced limited areas.

The applicability of paper mulberry fiber (PM-FB), which is bast fiber, for manufacturing cellulose nanocrystals (CNCs) with high-yield was investigated. The PM-FB and hardwood bleached kraft pulp (Hw-BKP) were hydrolyzed under different sulfuric acid concentrations, reaction times, and reaction temperatures. The dependence of the CNC yield on the hydrolysis conditions and crystallinity of the raw materials was analyzed. The functional groups of the CNCs and their zeta potentials were determined. The fiber length and width of the individual CNCs were determined by transmission electron microscopy image analysis. The PM-FB showed a higher crystallinity of 86.8% compared to that of Hw-BKP and exhibited a high CNC yield of 55% under strong hydrolysis conditions. The sulfate group was introduced into the CNCs, which increased their negative charge. The fiber width of PM-FB-based CNCs (PM-CNCs) was larger than that of Hw-BKP-based CNCs (Hw-CNCs), and the aspect ratio ranged from 29.0 to 12.2 depending on the hydrolysis conditions. The yield of PM-CNCs was higher than that of Hw-CNCs under the same hydrolysis conditions. In addition, both CNCs exhibited similar quality. Therefore, PM-FB is a promising raw material for efficient CNC manufacturing.

Recycled fibers used in the manufacturing of paper and board are associated with strength deficiencies. This study investigated the use of TEMPO-oxidized nanocellulose from oil palm empty fruit bunch (OPEFB-TEMPO) for reinforcing papers made from such fibers. Strength properties of tensile and tear were enhanced with the addition of OPEFB-TEMPO, with strong correlations, as indicated by the R2 values. The reinforcement capability was supported by the scattering coefficient-percent relationship. The only drawback of the nanocellulose addition is that it reduces pulp drainability, which can be minimized by adding drainage aids. Because only a relatively small amount is required, OPEFB-TEMPO has the potential to be used as paper strengthening agent, particularly in the production of low grammage papers.

Tissue paper is deep-rooted in our daily life because of its different types of products that allow various applications. Tissue paper is a low grammage paper that is mainly characterized by softness, tensile strength, liquid absorption, and elasticity. These characteristics are essential when producing products such as toilet paper, kitchen rolls, hand towels, napkins, and facials. The tissue paper production involves two stages: formation of the tissue paper sheet itself and its converting into different finished products. Converting is characterized by several operations, namely: unwinding, winding, embossing, lamination, perforation, cutting, packaging, and palletizing. The most impacting operation is the embossing, which consists of marking a pattern on the paper sheet by applying pressure, with the intent to produce papers more aesthetically pleasing to the final consumer and/or a way to identify a particular brand. Also, it affects final properties, increasing the liquid absorption capacity and bulk but reducing softness and tensile strength. Converting is complex and has a huge impact on the finished products properties. In this review, the authors explored the different steps of converting and how they impact the different properties of finished tissue products.

Insulating paper is the key material utilized in ultra-high voltage (UHV) projects, and it affects the safe and stable operation of the whole power system. Cellulose fiber-based insulating paper, having the advantages of low price and environmental friendliness, has been widely used as the preferred insulating material for certain transformers. Bamboo, as a fast-growing raw material, has a favorable fiber length and its carbon sequestration is better than that of wood. Bamboo can be potentially used as a new raw material for insulating paper, thus promoting the green development of the power and paper industry. This article mainly discusses the challenges and potentials of bamboo fiber-based insulating paper and the opportunities of bamboo fiber-based paper materials.

Micro RNAs (miRNAs) are 19–23 nucleotides-long non-coding RNA which have been identified as important biomarkers for many diseases, including cancers. Here, we report an ultrasensitive, highly specific, label-free, and without nucleic acid amplification (NAA) detection of miRNAs using paper-based single-walled carbon nanotubes (SWNTs) field-effect transistor (FET) biosensors. The strategy involved a two-step protocol starting with direct hybridization of the target miRNA with a specific RNA probe immobilized on SWNTs networks deposited on the paper substrate to generate the first response, followed by the recognition of the resulting RNA/miRNA duplexes with the Carnation Italian ringspot virus p19 protein (p19) in a size-dependent manner, giving the second electrical response that magnified the biosensor sensitivity. As a demonstration, we detected the miRNA-122a, a promising biomarker for the diagnosis of early-stage hepatocellular carcinoma (HCC) in various sample matrices, including phosphate buffers, human serum, and synthetic saliva. We achieved the lowest detection of 0.1 aM and a wide dynamic range of 0.1 aM–1 fM, that demonstrated its potential for rapid, facile, low-cost, and point-of-care detection of miRNAs for early cancer diagnosis.

A cell-on-electrode-on paper device (CEP-D) was developed to allow for simultaneous cell maintenance and electrochemical measurements. Precise quantification of neurotransmitters (here dopamine, DA) secreted by exocytosis from a population of PC-12 cells maintained in filter paper coated with PEDOT-PSS is demonstrated. A specific calibration protocol, based on the self-normalization of voltammetric data, is presented. Robust, reproducible, and low-cost measurements were achieved, confirming the release of DA after stimulation. Importantly, the impact of different drugs on the exocytotic machinery was tested, and the data obtained is consistent with previously reported experiments at the single cell level. Overall, and beyond the biological results, this study shows that simple, benchtop techniques can be used to obtain precious biochemical data from cells cultured on paper if the analytical protocol is carefully designed to account for the challenges of biomeasurements. This new approach paves the way for the design of smart ‘organs-on-paper’ that are affordable, precise and easy to use and produce, thus addressing several challenges of the current technology.

The exploration into nanomaterial-based nonenzymatic biosensors with superb performance in terms of good sensitivity and anti-interference ability in disease marker monitoring has always attained undoubted priority in sensing systems. In this work, we report the design and synthesis of a highly active nanocatalyst, i.e., palladium and platinum nanoparticles (Pt&Pd-NPs) decorated ultrathin nanoporous gold (NPG) film, which is modified on a homemade graphene paper (GP) to develop a high-performance freestanding and flexible nanohybrid electrode. Owing to the structural characteristics the robust GP electrode substrate, and high electrochemically catalytic activities and durability of the permeable NPG support and ultrafine and high-density Pt&Pd-NPs on it, the resultant Pt&Pd-NPs–NPG/GP electrode exhibits excellent sensing performance of low detection limitation, high sensitivity and anti-interference capability, good reproducibility and long-term stability for the detection of small molecular biomarkers hydrogen peroxide (H2O2) and glucose (Glu), and has been applied to the monitoring of H2O2 in different types of live cells and Glu in body fluids such as urine and fingertip blood, which is of great significance for the clinical diagnosis and prognosis in point-of-care testing.

In the present article we report a new hybrid microfluidic device (hyFlow) comprising a disposable paper electrode and a three-dimensional (3D) printed plastic chip for the electrochemical detection of a magnetic bead-silver nanoparticle (MB-AgNP) bioconjugate. This hybrid device evolved due to the difficulty of incorporating micron-scale MBs into paper-only fluidic devices. Specifically, paper fluidic devices can entrap MB-containing conjugates within their cellulose or nitrocellulose fiber matrix. The hyFlow system was designed to minimize such issues and transport MB conjugates more efficiently to the electrochemical detection zone of the device. The hyFlow system retains the benefit of fluid transport by pressure-driven flow, however, no pump is required for its operation. The hyFlow device is capable of detecting either pre-formed MB-AgNP conjugates or conjugates formed in situ. The detection limit of AgNPs using this device is 12 pM, which represents just 22 AgNPs per MB.

Paper-based microfluidic devices are an attractive platform for developing low-cost, point-of-care diagnostic tools. As paper-based devices' detection chemistries become more complex, more complicated devices are required, often entailing the sequential delivery of different liquids or reagents to reaction zones. Most research into flow control has been focused on introducing delays. However, delaying the flow can be problematic due to increased evaporation leading to sample loss. We report the use of a CO2 laser to uniformly etch the surface of the paper to modify wicking speeds in paper-based microfluidic devices. This technique can produce both wicking speed increases of up to 1.1× faster and decreases of up to 0.9× slower. Wicking speeds can be further enhanced by etching both sides of the paper, resulting in wicking 1.3× faster than unetched channels. Channels with lengthwise laser-etched grooves were also compared to uniformly etched channels, with the most heavily grooved channels wicking 1.9× faster than the fastest double-sided etched channels. Furthermore, sealing both sides of the channel in packing tape results in the most heavily etched channels, single-sided, double-sided, and grooved, wicking over 13× faster than unetched channels. By selectively etching individual channels, different combinations of sequential fluid delivery can be obtained without altering any channel geometry. Laser etching is a simple process that can be integrated into the patterning of the device and requires no additional materials or chemicals, enabling greater flow control for paper-based microfluidic devices.

This study focuses on the kinetics of volatile solids (VS) biodegradation of the biodrying process using pulp and paper secondary sludge. The experiments were carried out with air-flow rates of 0.51, 1.61, 3.25 and 5.26L/minkgVS) and initial moisture content of 64-66% w.b. Using five kinetic models and a nonlinear regression method, kinetic parameters were estimated and the models were analyzed with two statistical indicators. Higher air-flow rates cause greater moisture content reduction, lower temperature in the matrix, and lower VS reduction. At an air-flow rate as high as 5.26L/minkgVS there is no biodrying but only convective drying. The kinetic models used successfully simulate the VS biodegradation under biodrying conditions, with a root mean square error (RMSE) between 0.007929 and 0.02744. In conclusion, we show for the first time that VS biodegradation in the biodrying process can be successfully modeled with a kinetic model., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Enzymatic hydrolysis of waste paper is becoming a perspective way to obtain raw material for production of liquid biofuels. Reducing sugars solutions that arise from the process of saccharification are a precursors for following or simultaneous fermentation to ethanol. Different types of waste paper were evaluated, in terms of composition and usability, in order to select the appropriate type of the waste paper for the enzymatic hydrolysis process. Novozymes® enzymes NS50013 and NS50010 were used in a laboratory scale trials. Technological conditions, which seem to be the most suitable for hydrolysis after testing on cellulose pulp and filter paper, were applied to hydrolysis of widely available waste papers - offset paper, cardboard, recycled paper in two qualities, matte MYsol offset paper and for comparison again on model materials. The highest yields were achieved for the cardboard, which was further tested using various pretreatment combinations in purpose of increasing the hydrolysis yields., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

The production of release coatings has been increasing in recent years because of their use in various fields. However, commercially available release coatings are regarded as non-recyclable. As a consequence, the repulping of these residues is difficult, and their presence in the recycling stream represents an important source of contamination. One solution to this problem is to use new coating materials that can replace the siliconized backing, provided that these new materials are recyclable. As a solution to this problem, the authors propose the use of alkylated phosphorylated fibers to produce an environmentally friendly and inexpensive release paper. The results show that a surface application of hydrophobic phosphorylated fibers reduces the surface free energy of the paper support, as well as the peel strength, which facilitates the separation of the adhesive tape.

Rice straw is a widely available lignocellulosic waste with potential for energy recovery through anaerobic digestion. Lignin slows the hydrolysis phase, resulting in low methane recovery and long digestion periods. Although pretreatment is effective, it often requires high energy inputs or chemicals that are not feasible for farm-scale systems. This study investigates a unique co-digestion strategy to improve methane yields and reduce digestion times for farm-scale systems. By adding both piggery wastewater and paper mill sludge, specific methane yields in laboratory-scale digesters reached the theoretical value for rice straw (i.e. 330LNCH4/kgVS) over the 92-day period. Accelerated hydrolysis of the straw was directly related to the quantity of sludge added. The most stable digester, with sufficient buffering capacity and nutrients, contained equal parts of straw, wastewater and sludge. This approach is feasible for farm-scale applications since it requires no additional energy inputs or changes to existing infrastructure for dry systems., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

Friction profilometry is a powerful technique that is suitable for the surface characterization of paper products. In this technique, a stylus-type contact method that resembles papermaking processes is used for evaluating the quality attributes of products. The surface characterization requires both surface roughness and friction measurements. At present, however, few reports have been available regarding characterization of the friction by the surface profilometric method. The objective of this study was to provide guiding principles of a stylus-type contact surface profilometry for determining the friction properties of paper. Another objective was to introduce the concept of the mean absolute deviation (MAD) from the average coefficient of friction as a new friction parameter.

The development of bio-based flame retardants has received increasing attention. In this study, fully bio-based chitosan/sodium alginate (CS/SA) coating was applied by layer-by-layer (LbL) assembly on Xuan paper to improve its flame retardancy. The LOI value of Xuan paper reached 33.3% after 20 BLs CS/SA coating. Its char length was reduced to 8.8 cm with no after-flame and after-glow. These results showed that the flame retardancy of Xuan paper was greatly improved by LbL assembly CS/SA coating. Thermogravimetry results revealed that CS/SA coating on Xuan paper slowed down the thermal degradation process and promoted the char formation both under nitrogen and air atmosphere. The stable char layer formation by CS/SA coating covered on the Xuan paper inhibited the heat transfer and diffusion of combustible gases, showing obvious condensed phase flame retardant action. Scanning electron microscopy confirmed that CS/SA coating on paper fiber promoted the char formation to form the stable covering layer. Furthermore, the CS/SA coating formed non-flammable gases to enhance the flame retardancy of Xuan paper, showing a certain gas phase flame retardant action. This research provides a new approach for fire-resistant Xuan paper by using fully bio-based compounds.

Due to the increasing demand for eco-friendly, inexpensive sound absorbers, this study investigated composites made from recycled paper pulp and urea-formaldehyde adhesive. By varying the pulp contents, five samples from used copy paper and five samples from used corrugated board were fabricated. For the same type of porous absorber, one with a lower bulk density has a higher total porosity, resulting in a higher sound absorption coefficient (SAC) spectrum. Sound-absorbing performance of copy paper composites with bulk densities below 442.4 kg/m3 and corrugated board composites with densities of less than 474.8 kg/m3 can be alternatives to commercial polyurethane foam of the same thickness. The noise reduction coefficient (NRC), as well as the average SAC of all corrugated board composites at medium (αM) and high (αH) frequencies were greater than those of copy paper composites. However, the average SAC at low frequency (αL) was not explicitly different for copy paper and corrugated board composites. In conclusion, corrugated board composites are a better candidate as sound absorbers than copy paper composites with the same pulp content.

Carbon microsphere was successfully synthesized from waste office paper via hydrothermal method and high temperature treatment in nitrogen atmosphere. The process of carbon microsphere synthesis from waste office paper fiber using concentrated sulfuric acid was studied, and the influence of H2SO4 concentration and reaction time on the hydrolysis reaction was considered. To investigate the mechanism of conversion of waste office paper to carbon microsphere, Fourier transform infrared spectrometry was used to analyze the chemical composition of the supernatant liquid product and the non-carbonized carbon microsphere. The weight loss of the non-carbonized carbon microsphere was assessed through thermogravimetry. Scanning electron microscopy was used to analyze the morphology. The hydrolysis reaction of waste office paper fiber and synthesis mechanism of carbon microsphere under different conditions were evaluated. The results showed that when the reaction time reached 24 h, the product had uniform particle size and was well dispersed, and the more sulfuric acid present led to the waste office paper fiber being more thoroughly hydrolyzed.

In order to determine the influence of bast fibers isolated from Wikstroemia bark on the durability of paper, self-made paper was prepared using bagasse pulp mixed with Wikstroemia bark pulp using Kaihua paper manufacturing technology. The durability properties of the paper obtained with different proportions of Wikstroemia bark pulp were measured and analyzed. The results showed that Wikstroemia bark can lower the acidity, improve the mechanical strength, and delay the aging of paper. The mechanical strength showed an exponential relationship with the amount of Wikstroemia bark pulp added to the paper pulp. There was a linear positive correlation between the initial polymerization degree of the paper and the amount of Wikstroemia bark pulp, while the molecular fracture rate of the paper with Wikstroemia bark pulp was considerably reduced. Wikstroemia bark fibers are long fibers with high strength. At the same time, Wikstroemia bark fibers differ greatly in length, so the uniformity can meet the requirements. The durability of the paper made from only bagasse pulp was poor, but the overall strength and polymerization degree of the paper improve after being mixed with Wikstroemia bark pulp.

Effects of cellulose nanofibers (CNF) and cationic starch (CS) were evaluated as coating components relative to the physical and mechanical properties of fluting papersheets fabricated from recycled corrugated cardboard fibers. Fabricated fluting papers were subjected to size press applications by three different coating blends. Coating suspensions were prepared at various concentrations of CNF (0.5%, 1%, 2%, 3%, and 4%) and 4 wt% CS, and the same amounts of CS/CNF. The paper sheets were fabricated using size press machine as three-time repetitive applications, followed by one-time drying section, and compared to uncoated, CS-coated, and CNF-coated papers. The application of CNF suspensions increased tensile indices up to 11.7%. Moreover, CS/CNF suspensions resulted in a 67.2% increase in tensile index values. The coating of CS/CNF suspensions increased the burst index values by 163% at the CS+1%CNF concentration when compared to the control pulp. Surface application of prepared suspensions reduced the porosity of the samples under all conditions. The highest reduction in the air permeability was observed in the CS+4%CNF-coated samples as 91.5%. It can be concluded that the superficial applications of CNF on the physical and mechanical properties of recycled fluting paper was more effective in the presence of CS.

Paper-based microfluidic fuel cells (PMFCs) gradually become alternative energy sources due to their advanced features, including simple structure, low cost, without requiring auxiliary equipment. However, the applications of PMFCs are limited by the poor power density and expensive cost. Therefore, a novel design of catalyst layer with stepped Pd distribution is proposed to improve the PMFC performance and reduce the cost. An experimental investigation is performed to understand the underlying influence mechanism of the catalyst layer properties, including Nafion solution content catalyst layer area, catalyst loading and catalyst distribution. We found that the proportioin choice of 4.76% Nafion solution in preparing catalyst layer achieves a shortest reaction time and a highest output performance. In addition, choosing a small catalyst layer area and high catalyst loading is beneficial to improve the current density. With the hybrid arrangement of stepped catalyst layers, the PMFC reduces the cost and presents highest current density of 44.10 mA cm−2 and peak power density of 12.87 mWcm−2. Finally, our designed PMFC stack is employed to power a thermohygrograph and a blood glucose meter for at least 5 h. These practical applications are in favor of supporting the developments of integrated device with energy generation and electrochemical detection.

This paper implies production of cellulase and xylanase enzyme using a potent strain of Trichoderma harzianum for the efficient deinking of photocopier waste papers. Different nutritional and environmental factors were optimized for higher production of cellulase along with xylanase. After fermentation, maximum enzyme extraction was achieved from fermented matter using a three-step extraction process with increased efficiency by 26.6-29.3 % over single-step extraction. Static solid state was found as the best fermentation type using wheat bran (WB) as carbon source and ammonium ferrous sulfate (0.02 M) as nitrogen source. Subsequently, inoculum size (8 × 10(6) CFU/gds), incubation days (4 days), temperature (34 °C), initial pH (6.0), and moisture ratio (1:3) significantly affected the enzyme production. Cellulase and xylanase activities were found to be maximum at pH 5.5 and temperature 55-60 °C with good stability (even up to 6 h). Furthermore, this crude enzyme was evaluated for the deinking of photocopier waste papers without affecting the strength properties with improved drainage as an additional advantage. The crude enzyme-deinked pulp showed 23.6 % higher deinking efficiency and 3.2 % higher brightness than chemically deinked pulp. Strength properties like tensile, burst indices, and folding endurance were also observed to improve by 6.7, 13.4, and 10.3 %, respectively, for enzyme-deinked pulp. However, the tear index was decreased by 10.5 %. The freeness of the pulp was also increased by 21.6 % with reduced drainage time by 13.9 %.

The evaluation and classification of chemical properties in different copy-paper products could significantly help address document forgery. This study analyzes the feasibility of utilizing infrared spectroscopy in conjunction with machine learning algorithms for classifying copy-paper products. A dataset comprising 140 infrared spectra of copy-paper samples was collected. The classification models employed in this study include partial least squares-discriminant analysis, support vector machine, and K-nearest neighbors. The key findings indicate that a classification model based on the use of attenuated-total-reflection infrared spectroscopy demonstrated good performance, highlighting its potential as a valuable tool in accurately classifying paper products and ensuring assisting in solving criminal cases involving document forgery.

Good drainage of the pulp suspension is vitally important for stable papermaking. Although the addition of lignocellulosic nanofibers (LNFC) in pulp could highly reinforce the end paper sheets, the application of LNFC could diminished the pulp drainage. To solve this problem, the impact of the zeolite-chitosan and bentonite-chitosan microparticle drainage aid systems on the LNFC-reinforced recycled pulp was systematically investigated. Results indicated that the mentioned microparticle systems improved the drainage and retention especially in applying 1% chitosan with 0.3% zeolite. In mechanical properties, applying the microparticle systems, not only did not deteriorate these properties, but also improved most of them, especially in treatment containing zeolite-chitosan. It seems that the improved pulp drainage and the mechanical properties of the end papers was due to successful mission of microparticle system and synergistic interactions of pulp fibres, LNFC, chitosan, and zeolite, which could also lead to denser and more uniform structure of handsheets.

Activated carbon was prepared from waste melamine-impregnated paper (MIP) by pyrolysis with activation by NaOH. The adsorption parameters such as carbonization temperature (300, 350, 400, 450 °C), NaOH to C ratio (2:1, 3:1, 4:1, 5:1), and initial methylene blue (MB) dye concentration (20 to 600 mg/L) were studied. The adsorption results were fit by the Langmuir isotherm model and pseudo-second order kinetics. It was found that the activated carbon from MIP had a maximum adsorption capacity of 497 mg/g at 400 °C (carbonization temperature) and NaOH to C ratio (2:1). The highest removal of methylene blue (MB) via activated carbon was 99.4%. The π-π interaction between dye molecules and MIP active carbon was proposed to be a primary driving force for dye adsorption. This activated carbon adsorbent based on MIP was shown to be highly promising for water decontamination applications.

Understanding life on a molecular level is greatly enhanced when students are given the opportunity to visualize the molecules. Especially understanding DNA structure and function is essential for understanding key concepts of molecular biology such as DNA, central dogma and the manipulation of DNA. Researches have shown that undergraduate students typically lack a coherent view of concepts and their relationships when studying molecular biology within instruction-based lecture with no other pedagogical applications. In this study, we have designed an experimental to investigate the effect of a hands on paper models exercise within group work (Jigsaw Cooperative learning) on student biology teachers' academic achievement and attitudes to biotechnologies. Our goal was to develop a manipulative activity using inexpensive but graphic materials. The sample for this study consisted of 42 student teachers in the department of Biology Education during the 2005-2006 academic year. We have divided the students in two different classes. One of the classes was randomly assigned as the non-paper model (control, n=21) and the other as the paper model group (n=21). In experimental group cut and paste paper models exercise within cooperative groups, in control group traditional instructional design has been applied in teaching DNA structure, Central Dogma and Recombinant DNA. The posttests of the groups in achievement and attitudes to biotechnologies show significant differences. The results indicated that the paper model group was more successful than the non-paper group. (Contains 1 figure and 4 tables.)

Wooden foams have been extensively researched in recent years because of their special structure and green features. At the same time, noise pollution is increasing, prompting sound insulation to become another research focus. In this study, a three-factor, five-level orthogonal experiment was designed, and 25 sets of specimens were produced for testing and analysis in 19 frequency bands. To measure the sound insulation, two criteria were used: the material sound loss rate (for determining mass) and the material sound loss rate (for determining volume sound). After measuring, these two values were compared. It was found that the material was highly isolated from high frequency noise. The amount of adhesive used and the choice of mould had a considerable effect on the sound insulation of the specimens as the foaming rate was varied. Good sound insulation can be achieved when the foaming rate is very low and when the foaming rate is very high.

Signal readout technologies that do not require any instrument are essential for improving the convenience and availability of paper-based sensors. Thanks to the remarkable progress in material science and nanotechnology, paper-based sensors with instrument-free signal readout have been developed for multiple purposes, such as biomedical detection, environmental pollutant tracking, and food analysis. In this review, the developments in instrument-free signal readout technologies for paper-based sensors from 2020 to 2023 are summarized. The instrument-free signal readout technologies, such as distance-based signal readout technology, counting-based signal readout technology, text-based signal readout technology, as well as other transduction technologies, are briefly introduced, respectively. On the other hand, the applications of paper-based sensors with instrument-free signal readout technologies are summarized, including biomedical analysis, environmental analysis, food analysis, and other applications. Finally, the potential and difficulties associated with the advancement of paper-based sensors without instruments are discussed.

Herein, a cost-effective and portable microfluidic paper-based sensor is proposed for the simultaneous and rapid detection of glucose, free amino acids, and vitamin C in fruit. The device was constructed by embedding a poly(carboxybetaine acrylamide) (pCBAA)-modified cellulose paper chip within a hydrophobic acrylic plate. We successfully showcased the capabilities of a filter paper-based microfluidic sensor for the detection of fruit nutrients using three distinct colorimetric analyses. Within a single paper chip, we simultaneously detected glucose, free amino acids, and vitamin C in the vivid hues of cyan blue, purple, and Turnbull’s blue, respectively, in three distinctive detection zones. Notably, we employed more stable silver nanoparticles for glucose detection, replacing the traditional peroxidase approach. The detection limits for glucose reached a low level of 0.049 mmol/L. Meanwhile, the detection limits for free amino acids and vitamin C were found to be 0.236 mmol/L and 0.125 mmol/L, respectively. The feasibility of the proposed sensor was validated in 13 different practical fruit samples using spectrophotometry. Cellulose paper utilizes capillary action to process trace fluids in tiny channels, and combined with pCBAA, which has superior hydrophilicity and anti-pollution properties, it greatly improves the sensitivity and practicality of paper-based sensors. Therefore, the paper-based colorimetric device is expected to provide technical support for the nutritional value assessment of fruits in the field of rapid detection.

Abstract Background Laccase-based biosensors are efficient for detecting phenolic compounds. However, the instability and high cost of laccases have hindered their practical utilization. Results In this study, we developed hierarchical manganese dioxide–copper phosphate hybrid nanoflowers (H–Mn–Cu NFs) as excellent laccase-mimicking nanozymes. To synthesize the H–Mn–Cu NFs, manganese dioxide nanoflowers (MnO2 NFs) were first synthesized by rapidly reducing potassium permanganate using citric acid. The MnO2 NFs were then functionalized with amine groups, followed by incubation with copper sulfate for three days at room temperature to drive the coordination interaction between the amine moieties and copper ions and to induce anisotropic growth of the petals composed of copper phosphate crystals, consequently yielding H–Mn–Cu NFs. Compared with those of free laccase, at the same mass concentration, H–Mn–Cu NFs exhibited lower K m (~ 85%) and considerably higher V max (~ 400%), as well as significantly enhanced stability in the ranges of pH, temperature, ionic strength, and incubation periods evaluated. H–Mn–Cu NFs also catalyzed the decolorization of diverse dyes considerably faster than the free laccase. Based on these advantageous features, a paper microfluidic device incorporating H–Mn–Cu NFs was constructed for the convenient visual detection of phenolic neurotransmitters, including dopamine and epinephrine. The device enabled rapid and sensitive quantification of target neurotransmitters using an image acquired using a smartphone. Conclusions These results clearly show that H–Mn–Cu NFs could be potential candidates to replace natural laccases for a wide range of applications in biosensing, environmental protection, and biotechnology. Graphical Abstract