Search

Millimeter-wave radar-based identification technology has a wide range of applications in persistent identity verification, covering areas such as security production, healthcare, and personalized smart consumption systems. It has received extensive attention from the academic community due to its advantages of being non-invasive, environmentally insensitive and privacy-preserving. Existing identification algorithms mainly rely on a single signal, such as breathing or heartbeat. The reliability and accuracy of these algorithms are limited due to the high similarity of breathing patterns and the low signal-to-noise ratio of heartbeat signals. To address the above issues, this paper proposes an algorithm for multimodal fusion for identity recognition. This algorithm extracts and fuses features derived from phase signals, respiratory signals, and heartbeat signals for identity recognition purposes. The spatial features of signals with different modes are first extracted by the residual network (ResNet), after which these features are fused with a spatial-channel attention fusion module. On this basis, the temporal features are further extracted with a time series-based self-attention mechanism. Finally, the feature vectors of the user's vital sign modality are obtained to perform identity recognition. This method makes full use of the correlation and complementarity between different modal signals to improve the accuracy and reliability of identification. Simulation experiments show that the algorithm identity recognition proposed in this paper achieves an accuracy of 94.26% on a 20-subject self-test dataset, which is much higher than that of the traditional algorithm, which is about 85%. [ABSTRACT FROM AUTHOR]

In this paper, we propose a novel method for monocular depth estimation using the hourglass neck module. The proposed method has the following originality. First, feature maps are extracted from Swin Transformer V2 using a masked image modeling (MIM) pretrained model. Since Swin Transformer V2 has a different patch size for each attention stage, it is easier to extract local and global features from images input by the vision transformer (ViT)-based encoder. Second, to maintain the polymorphism and local inductive bias of the feature map extracted from Swin Transformer V2, a feature map is input into the hourglass neck module. Third, deformable attention can be used at the waist of the hourglass neck module to reduce the computation cost and highlight the locality of the feature map. Finally, the feature map traverses the neck and proceeds through a decoder, comprised of a deconvolution layer and an upsampling layer, to generate a depth image. To evaluate the objective reliability of the proposed method in this paper, we used the NYU Depth V2 dataset to compare and evaluate the methods published in other papers. As a result of the experiment, the RMSE value of the novel method for monocular depth estimation using the hourglass neck module proposed in this paper was 0.274, which was lower than those published in other papers. The lower the RMSE value, the better the depth estimation method; therefore, its efficiency compared to other techniques has been proven. [ABSTRACT FROM AUTHOR]

Semantic segmentation of target objects in power transmission line corridor point cloud scenes is a crucial step in powerline tree barrier detection. The massive quantity, disordered distribution, and non-uniformity of point clouds in power transmission line corridor scenes pose significant challenges for feature extraction. Previous studies have often overlooked the core utilization of spatial information, limiting the network's ability to understand complex geometric shapes. To overcome this limitation, this paper focuses on enhancing the deep expression of spatial geometric information in segmentation networks and proposes a method called BDF-Net to improve RandLA-Net. For each input 3D point cloud data, BDF-Net first encodes the relative coordinates and relative distance information into spatial geometric feature representations through the Spatial Information Encoding block to capture the local spatial structure of the point cloud data. Subsequently, the Bilinear Pooling block effectively combines the feature information of the point cloud with the spatial geometric representation by leveraging its bilinear interaction capability thus learning more discriminative local feature descriptors. The Global Feature Extraction block captures the global structure information in the point cloud data by using the ratio between the point position and the relative position, so as to enhance the semantic understanding ability of the network. In order to verify the performance of BDF-Net, this paper constructs a dataset, PPCD, for the point cloud scenario of transmission line corridors and conducts detailed experiments on it. The experimental results show that BDF-Net achieves significant performance improvements in various evaluation metrics, specifically achieving an OA of 97.16%, a mIoU of 77.48%, and a mAcc of 87.6%, which are 3.03%, 16.23%, and 18.44% higher than RandLA-Net, respectively. Moreover, comparisons with other state-of-the-art methods also verify the superiority of BDF-Net in point cloud semantic segmentation tasks. [ABSTRACT FROM AUTHOR]

Timely discovery and disposal of road risk sources constitute the cornerstone of road operation safety. Presently, the detection of road risk sources frequently relies on manual inspections via inspection vehicles, a process that is both inefficient and time-consuming. To tackle this challenge, this paper introduces a novel automated approach for detecting road risk sources, termed the multi-scale lightweight network (MSLN). This method primarily focuses on identifying road surfaces, potholes, and scattered objects. To mitigate the influence of real-world factors such as noise and uneven brightness on test results, pavement images were carefully collected. Initially, the collected images underwent grayscale processing. Subsequently, the median filtering algorithm was employed to filter out noise interference. Furthermore, adaptive histogram equalization techniques were utilized to enhance the visibility of cracks and the road background. Following these preprocessing steps, the MSLN model was deployed for the detection of road risk sources. Addressing the challenges associated with two-stage network models, such as prolonged training and testing times, as well as deployment difficulties, this study adopted the lightweight feature extraction network MobileNetV2. Additionally, transfer learning was incorporated to elevate the model's training efficiency. Moreover, this paper established a mapping relationship model that transitions from the world coordinate system to the pixel coordinate system. This model enables the calculation of risk source dimensions based on detection outcomes. Experimental results reveal that the MSLN model exhibits a notably faster convergence rate. This enhanced convergence not only boosts training speed but also elevates the precision of risk source detection. Furthermore, the proposed mapping relationship coordinate transformation model proves highly effective in determining the scale of risk sources. [ABSTRACT FROM AUTHOR]

In order to improve the reading efficiency of pointer meter, this paper proposes a reading method based on LinkNet. Firstly, the meter dial area is detected using YOLOv8. Subsequently, the detected images are fed into the improved LinkNet segmentation network. In this network, we replace traditional convolution with partial convolution, which reduces the number of model parameters while ensuring accuracy is not affected. Remove one pair of encoding and decoding modules to further compress the model size. In the feature fusion part of the model, the CBAM (Convolutional Block Attention Module) attention module is added and the direct summing operation is replaced by the AFF (Attention Feature Fusion) module, which enhances the feature extraction capability of the model for the segmented target. In the subsequent rotation correction section, this paper effectively addresses the issue of inaccurate prediction by CNN networks for axisymmetric images within the 0–360° range, by dividing the rotation angle prediction into classification and regression steps. It ensures that the final reading part receives the correct angle of image input, thereby improving the accuracy of the overall reading algorithm. The final experimental results indicate that our proposed reading method has a mean absolute error of 0.20 and a frame rate of 15. [ABSTRACT FROM AUTHOR]

Human action recognition based on optical and infrared video data is greatly affected by the environment, and feature extraction in traditional machine learning classification methods is complex; therefore, this paper proposes a method for human action recognition using Frequency Modulated Continuous Wave (FMCW) radar based on an asymmetric convolutional residual network. First, the radar echo data are analyzed and processed to extract the micro-Doppler time domain spectrograms of different actions. Second, a strategy combining asymmetric convolution and the Mish activation function is adopted in the residual block of the ResNet18 network to address the limitations of linear and nonlinear transformations in the residual block for micro-Doppler spectrum recognition. This approach aims to enhance the network's ability to learn features effectively. Finally, the Improved Convolutional Block Attention Module (ICBAM) is integrated into the residual block to enhance the model's attention and comprehension of input data. The experimental results demonstrate that the proposed method achieves a high accuracy of 98.28% in action recognition and classification within complex scenes, surpassing classic deep learning approaches. Moreover, this method significantly improves the recognition accuracy for actions with similar micro-Doppler features and demonstrates excellent anti-noise recognition performance. [ABSTRACT FROM AUTHOR]

With the advancement in living standards, there has been a significant surge in the quantity and diversity of household waste. To safeguard the environment and optimize resource utilization, there is an urgent demand for effective and cost-efficient intelligent waste classification methodologies. This study presents MRS-YOLO (Multi-Resolution Strategy-YOLO), a waste detection and classification model. The paper introduces the SlideLoss_IOU technique for detecting small objects, integrates RepViT of the Transformer mechanism, and devises a novel feature extraction strategy by amalgamating multi-dimensional and dynamic convolution mechanisms. These enhancements not only elevate the detection accuracy and speed but also bolster the robustness of the current YOLO model. Validation conducted on a dataset comprising 12,072 samples across 10 categories, including recyclable metal and paper, reveals a 3.6% enhancement in mAP50% accuracy compared to YOLOv8, coupled with a 15.09% reduction in volume. Furthermore, the model demonstrates improved accuracy in detecting small targets and exhibits comprehensive detection capabilities across diverse scenarios. For transparency and to facilitate further research, the source code and related datasets used in this study have been made publicly available at GitHub. [ABSTRACT FROM AUTHOR]

With the continuous advancement of the economy and technology, the number of cars continues to increase, and the traffic congestion problem on some key roads is becoming increasingly serious. This paper proposes a new vehicle information feature map (VIFM) method and a multi-branch convolutional neural network (MBCNN) model and applies it to the problem of traffic congestion detection based on camera image data. The aim of this study is to build a deep learning model with traffic images as input and congestion detection results as output. It aims to provide a new method for automatic detection of traffic congestion. The deep learning-based method in this article can effectively utilize the existing massive camera network in the transportation system without requiring too much investment in hardware. This study first uses an object detection model to identify vehicles in images. Then, a method for extracting a VIFM is proposed. Finally, a traffic congestion detection model based on MBCNN is constructed. This paper verifies the application effect of this method in the Chinese City Traffic Image Database (CCTRIB). Compared to other convolutional neural networks, other deep learning models, and baseline models, the method proposed in this paper yields superior results. The method in this article obtained an F1 score of 98.61% and an accuracy of 98.62%. Experimental results show that this method effectively solves the problem of traffic congestion detection and provides a powerful tool for traffic management. [ABSTRACT FROM AUTHOR]

Since substations are key parts of power transmission, ensuring the safety of substations involves monitoring whether the substation equipment is in a normal state. Oil leakage detection is one of the necessary daily tasks of substation inspection robots, which can immediately find out whether there is oil leakage in the equipment in operation so as to ensure the service life of the equipment and maintain the safe and stable operation of the system. At present, there are still some challenges in oil leakage detection in substation equipment: there is a lack of a more accurate method of detecting oil leakage in small objects, and there is no combination of intelligent inspection robots to assist substation inspection workers in judging oil leakage accidents. To address these issues, this paper proposes a small object detection method for oil leakage defects in substations. This paper proposes a small object detection method for oil leakage defects in substations, which is based on the feature extraction network Resnet-101 of the Faster-RCNN model for improvement. In order to decrease the loss of information in the original image, especially for small objects, this method is developed by canceling the downsampling operation and replacing the large convolutional kernel with a small convolutional kernel. In addition, the method proposed in this paper is combined with an intelligent inspection robot, and an oil leakage decision-making scheme is designed, which can provide substation equipment oil leakage maintenance recommendations for substation workers to deal with oil leakage accidents. Finally, the experimental validation of real substation oil leakage image collection is carried out by the intelligent inspection robot equipped with a camera. The experimental results show that the proposed FRRNet101-c model in this paper has the best performance for oil leakage detection in substation equipment compared with several baseline models, improving the Mean Average Precision (mAP) by 6.3%, especially in detecting small objects, which has improved by 12%. [ABSTRACT FROM AUTHOR]

Scene text detection is an important research field in computer vision, playing a crucial role in various application scenarios. However, existing scene text detection methods often fail to achieve satisfactory results when faced with text instances of different sizes, shapes, and complex backgrounds. To address the challenge of detecting diverse texts in natural scenes, this paper proposes a multi-scale natural scene text detection method based on attention feature extraction and cascaded feature fusion. This method combines global and local attention through an improved attention feature fusion module (DSAF) to capture text features of different scales, enhancing the network's perception of text regions and improving its feature extraction capabilities. Simultaneously, an improved cascaded feature fusion module (PFFM) is used to fully integrate the extracted feature maps, expanding the receptive field of features and enriching the expressive ability of the feature maps. Finally, to address the cascaded feature maps, a lightweight subspace attention module (SAM) is introduced to partition the concatenated feature maps into several sub-space feature maps, facilitating spatial information interaction among features of different scales. In this paper, comparative experiments are conducted on the ICDAR2015, Total-Text, and MSRA-TD500 datasets, and comparisons are made with some existing scene text detection methods. The results show that the proposed method achieves good performance in terms of accuracy, recall, and F-score, thus verifying its effectiveness and practicality. [ABSTRACT FROM AUTHOR]

Aiming at the shortcomings of single-sensor sensing information characterization ability, which is easily interfered with by external environmental factors, a method of intelligent perception is proposed in this paper. This method integrates multi-source and multi-level information, including spindle temperature field, spindle thermal deformation, operating parameters, and motor current. Firstly, the internal and external thermal-error-related signals of the spindle system are collected by sensors, and the feature parameters are extracted; then, the radial basis function (RBF) neural network is utilized to realize the preliminary integration of the feature parameters because of the advantages of the RBF neural network, which offers strong multi-dimensional solid nonlinear mapping ability and generalization ability. Thermal-error decision values are then generated by a weighted fusion of different pieces of evidence by considering uncertain information from multiple sources. The spindle thermal-error sensing experiment was based on the spindle system of the VMC850 (Yunnan Machine Tool Group Co., LTD, Yunnan, China) vertical machining center of the Yunnan Machine Tool Factory. Experiments were designed for thermal-error sensing of the spindle under constant speed (2000 r/min and 4000 r/min), standard variable speed, and stepped variable speed conditions. The experiment's results show that the prediction accuracy of the intelligent-sensing model with multi-source information fusion can reach 98.1%, 99.3%, 98.6%, and 98.8% under the above working conditions, respectively. The intelligent-perception model proposed in this paper has higher accuracy and lower residual error than the traditional BP neural network perception and wavelet neural network models. The research in this paper provides a theoretical basis for the operation, maintenance management, and performance optimization of machine tool spindle systems. [ABSTRACT FROM AUTHOR]

As remote sensing technology has advanced, the use of satellites and similar technologies has become increasingly prevalent in daily life. Now, it plays a crucial role in hydrology, agriculture, and geography. Nevertheless, because of the distinct qualities of remote sensing, including expansive scenes and small, densely packed targets, there are many challenges in detecting remote sensing objects. Those challenges lead to insufficient accuracy in remote sensing object detection. Consequently, developing a new model is essential to enhance the identification capabilities for objects in remote sensing imagery. To solve these constraints, we have designed the OD-YOLO approach that uses multi-scale feature fusion to improve the performance of the YOLOv8n model in small target detection. Firstly, traditional convolutions have poor recognition capabilities for certain geometric shapes. Therefore, in this paper, we introduce the Detection Refinement Module (DRmodule) into the backbone architecture. This module utilizes Deformable Convolutional Networks and the Hybrid Attention Transformer to strengthen the model's capability for feature extraction from geometric shapes and blurred objects effectively. Meanwhile, based on the Feature Pyramid Network of YOLO, at the head of the model framework, this paper enhances the detection capability by introducing a Dynamic Head to strengthen the fusion of different scales features in the feature pyramid. Additionally, to address the issue of detecting small objects in remote sensing images, this paper specifically designs the OIoU loss function to finely describe the difference between the detection box and the true box, further enhancing model performance. Experiments on the VisDrone dataset show that OD-YOLO surpasses the compared models by at least 5.2% in mAP50 and 4.4% in mAP75, and experiments on the Foggy Cityscapes dataset demonstrated that OD-YOLO improved mAP by 6.5%, demonstrating outstanding results in tasks related to remote sensing images and adverse weather object detection. This work not only advances the research in remote sensing image analysis, but also provides effective technical support for the practical deployment of future remote sensing applications. [ABSTRACT FROM AUTHOR]

With the increasing complexity of the grid meter dial, precise feature extraction is becoming more and more difficult. Many automatic recognition solutions have been proposed for grid meter readings. However, traditional inspection methods cannot guarantee detection accuracy in complex environments. So, deep-learning methods are combined with grid meter recognition. Existing recognition systems that utilize segmentation models exhibit very high computation. It is challenging to ensure high real-time performance in edge computing devices. Therefore, an improved meter recognition model based on YOLOv7 is proposed in this paper. Partial convolution (PConv) is introduced into YOLOv7 to create a lighter network. Different PConv introduction locations on the base module have been used in order to find the optimal approach for reducing the parameters and floating point of operations (FLOPs). Meanwhile, the dynamic head (DyHead) module is utilized to enhance the attention mechanism for the YOLOv7 model. It can improve the detection accuracy of striped objects. As a result, this paper achieves mAP 50 v a l of 97.87% and mAP 50 : 90 v a l of 62.4% with only 5.37 M parameters. The improved model's inference speed can reach 108 frames per second (FPS). It enables detection accuracy that can reach ± 0.1 degrees in the grid meter. [ABSTRACT FROM AUTHOR]

Aiming at the problems of target detection models in traffic scenarios including a large number of parameters, heavy computational burden, and high application cost, this paper introduces an enhanced lightweight real-time detection algorithm, which exhibits higher detection speed and accuracy for vehicle detection. This paper considers the YOLOv7 algorithm as the benchmark model, designs a lightweight backbone network, and uses the MobileNetV3 lightweight network to extract target features. Inspired by the structure of SPPF, the spatial pyramid pooling module is reconfigured by incorporating GSConv, and a lightweight SPPFCSPC-GS module is designed, aiming to minimize the quantity of model parameters and enhance the training speed even further. Furthermore, the CA mechanism is integrated to enhance the feature extraction capability of the model. Finally, the MPDIoU loss function is utilized to optimize the model's training process. Experiments showcase that the refined YOLOv7 algorithm can achieve 98.2% mAP on the BIT-Vehicle dataset with 52.8% fewer model parameters than the original model and a 35.2% improvement in FPS. The enhanced model adeptly strikes a finer equilibrium between velocity and precision, providing favorable conditions for embedding the model into mobile devices. [ABSTRACT FROM AUTHOR]

(1) Background: The ability to recognize identities is an essential component of security. Electrocardiogram (ECG) signals have gained popularity for identity recognition because of their universal, unique, stable, and measurable characteristics. To ensure accurate identification of ECG signals, this paper proposes an approach which involves mixed feature sampling, sparse representation, and recognition. (2) Methods: This paper introduces a new method of identifying individuals through their ECG signals. This technique combines the extraction of fixed ECG features and specific frequency features to improve accuracy in ECG identity recognition. This approach uses the wavelet transform to extract frequency bands which contain personal information features from the ECG signals. These bands are reconstructed, and the single R-peak localization determines the ECG window. The signals are segmented and standardized based on the located windows. A sparse dictionary is created using the standardized ECG signals, and the KSVD (K-Orthogonal Matching Pursuit) algorithm is employed to project ECG target signals into a sparse vector–matrix representation. To extract the final representation of the target signals for identification, the sparse coefficient vectors in the signals are maximally pooled. For recognition, the co-dimensional bundle search method is used in this paper. (3) Results: This paper utilizes the publicly available European ST-T database for our study. Specifically, this paper selects ECG signals from 20, 50 and 70 subjects, each with 30 testing segments. The method proposed in this paper achieved recognition rates of 99.14%, 99.09%, and 99.05%, respectively. (4) Conclusion: The experiments indicate that the method proposed in this paper can accurately capture, represent and identify ECG signals. [ABSTRACT FROM AUTHOR]

Aiming at the problems of the poor recognition effect and low recognition rate of the existing methods in the process of belt deviation detection, this paper proposes a real-time belt deviation detection method. Firstly, ResNet18 combined with the attention mechanism module is used as a feature extraction network to enhance the features in the belt edge region and suppress the features in other regions. Then, the extracted features are used to predict the approximate locations of the belt edges using a classifier based on the contextual information on the fully connected layer. Next, the improved gradient equation is used as a structural loss in the model training stage to make the model prediction value closer to the target value. Then, the authors of this paper use the least squares method to fit the set of detected belt edge line points to obtain the accurate belt edge straight line. Finally, the deviation threshold is set according to the requirements of the safety production code, and the fitting results are compared with the threshold to achieve the belt deviation detection. Comparisons are made with four other methods: ultrafast structure-aware deep lane detection, end-to-end wireframe parsing, LSD, and the Hough transform. The results show that the proposed method is the fastest at 41 frames/sec; the accuracy is improved by 0.4%, 13.9%, 45.9%, and 78.8% compared to the other four methods; and the F1-score index is improved by 0.3%, 10.2%, 32.6%, and 72%, respectively, which meets the requirements of practical engineering applications. The proposed method can be used for intelligent monitoring and control in coal mines, logistics and transport industries, and other scenarios requiring belt transport. [ABSTRACT FROM AUTHOR]

This paper comprehensively reviews hardware acceleration techniques and the deployment of convolutional neural networks (CNNs) for analyzing electroencephalogram (EEG) signals across various application areas, including emotion classification, motor imagery, epilepsy detection, and sleep monitoring. Previous reviews on EEG have mainly focused on software solutions. However, these reviews often overlook key challenges associated with hardware implementation, such as scenarios that require a small size, low power, high security, and high accuracy. This paper discusses the challenges and opportunities of hardware acceleration for wearable EEG devices by focusing on these aspects. Specifically, this review classifies EEG signal features into five groups and discusses hardware implementation solutions for each category in detail, providing insights into the most suitable hardware acceleration strategies for various application scenarios. In addition, it explores the complexity of efficient CNN architectures for EEG signals, including techniques such as pruning, quantization, tensor decomposition, knowledge distillation, and neural architecture search. To the best of our knowledge, this is the first systematic review that combines CNN hardware solutions with EEG signal processing. By providing a comprehensive analysis of current challenges and a roadmap for future research, this paper provides a new perspective on the ongoing development of hardware-accelerated EEG systems. [ABSTRACT FROM AUTHOR]

Large field-of-view images are increasingly used in various environments today, and image stitching technology can make up for the limited field of view caused by hardware design. However, previous methods are constrained in various environments. In this paper, we propose a method that combines the powerful feature extraction capabilities of the Superpoint algorithm and the exact feature matching capabilities of the Lightglue algorithm with the image fusion algorithm of Unsupervised Deep Image Stitching (UDIS). Our proposed method effectively improves the situation where the linear structure is distorted and the resolution is low in the stitching results of the UDIS algorithm. On this basis, we make up for the shortcomings of the UDIS fusion algorithm. For stitching fractures of UDIS in some complex situations, we optimize the loss function of UDIS. We use a second-order differential Laplacian operator to replace the difference in the horizontal and vertical directions to emphasize the continuity of the structural edges during training. Combined with the above improvements, the Super Unsupervised Deep Image Stitching (SuperUDIS) algorithm is finally formed. SuperUDIS has better performance in both qualitative and quantitative evaluations compared to the UDIS algorithm, with the PSNR index increasing by 0.5 on average and the SSIM index increasing by 0.02 on average. Moreover, the proposed method is more robust in complex environments with large color differences or multi-linear structures. [ABSTRACT FROM AUTHOR]

Aiming at the problem that existing emotion recognition methods fail to make full use of the information in the time, frequency, and spatial domains in the EEG signals, which leads to the low accuracy of EEG emotion classification, this paper proposes a multi-feature, multi-frequency band-based cross-scale attention convolutional model (CATM). The model is mainly composed of a cross-scale attention module, a frequency–space attention module, a feature transition module, a temporal feature extraction module, and a depth classification module. First, the cross-scale attentional convolution module extracts spatial features at different scales for the preprocessed EEG signals; then, the frequency–space attention module assigns higher weights to important channels and spatial locations; next, the temporal feature extraction module extracts temporal features of the EEG signals; and, finally, the depth classification module categorizes the EEG signals into emotions. We evaluated the proposed method on the DEAP dataset with accuracies of 99.70% and 99.74% in the valence and arousal binary classification experiments, respectively; the accuracy in the valence–arousal four-classification experiment was 97.27%. In addition, considering the application of fewer channels, we also conducted 5-channel experiments, and the binary classification accuracies of valence and arousal were 97.96% and 98.11%, respectively. The valence–arousal four-classification accuracy was 92.86%. The experimental results show that the method proposed in this paper exhibits better results compared to other recent methods, and also achieves better results in few-channel experiments. [ABSTRACT FROM AUTHOR]

We live in the era of large data analysis, where processing vast datasets has become essential for uncovering valuable insights across various domains of our lives. Machine learning (ML) algorithms offer powerful tools for processing and analyzing this abundance of information. However, the considerable time and computational resources needed for training ML models pose significant challenges, especially within cascade schemes, due to the iterative nature of training algorithms, the complexity of feature extraction and transformation processes, and the large sizes of the datasets involved. This paper proposes a modification to the existing ML-based cascade scheme for analyzing large biomedical datasets by incorporating principal component analysis (PCA) at each level of the cascade. We selected the number of principal components to replace the initial inputs so that it ensured 95% variance retention. Furthermore, we enhanced the training and application algorithms and demonstrated the effectiveness of the modified cascade scheme through comparative analysis, which showcased a significant reduction in training time while improving the generalization properties of the method and the accuracy of the large data analysis. The improved enhanced generalization properties of the scheme stemmed from the reduction in nonsignificant independent attributes in the dataset, which further enhanced its performance in intelligent large data analysis. [ABSTRACT FROM AUTHOR]

This work presents a novel approach to enhancing iris recognition systems through a two-module approach focusing on low-level image preprocessing techniques and advanced feature extraction. The primary contributions of this paper include: (i) the development of a robust preprocessing module utilizing the Canny algorithm for edge detection and the circle-based Hough transform for precise iris extraction, and (ii) the implementation of Binary Statistical Image Features (BSIF) with domain-specific filters trained on iris-specific data for improved biometric identification. By combining these advanced image preprocessing techniques, the proposed method addresses key challenges in iris recognition, such as occlusions, varying pigmentation, and textural diversity. Experimental results on the Human-inspired Domain-specific Binarized Image Features (HDBIF) Dataset, consisting of 1892 iris images, confirm the significant enhancements achieved. Moreover, this paper offers a comprehensive and reproducible research framework by providing source codes and access to the testing database through the Notre Dame University dataset website, thereby facilitating further application and study. Future research will focus on exploring adaptive algorithms and integrating machine learning techniques to improve performance across diverse and unpredictable real-world scenarios. [ABSTRACT FROM AUTHOR]

In large public places such as railway stations and airports, dense pedestrian detection is important for safety and security. Deep learning methods provide relatively effective solutions but still face problems such as feature extraction difficulties, image multi-scale variations, and high leakage detection rates, which bring great challenges to the research in this field. In this paper, we propose an improved dense pedestrian detection algorithm GR-yolo based on Yolov8. GR-yolo introduces the repc3 module to optimize the backbone network, which enhances the ability of feature extraction, adopts the aggregation–distribution mechanism to reconstruct the yolov8 neck structure, fuses multi-level information, achieves a more efficient exchange of information, and enhances the detection ability of the model. Meanwhile, the Giou loss calculation is used to help GR-yolo converge better, improve the detection accuracy of the target position, and reduce missed detection. Experiments show that GR-yolo has improved detection performance over yolov8, with a 3.1% improvement in detection means accuracy on the wider people dataset, 7.2% on the crowd human dataset, and 11.7% on the people detection images dataset. Therefore, the proposed GR-yolo algorithm is suitable for dense, multi-scale, and scene-variable pedestrian detection, and the improvement also provides a new idea to solve dense pedestrian detection in real scenes. [ABSTRACT FROM AUTHOR]

Addressing the limitations of current railway track foreign object detection techniques, which suffer from inadequate real-time performance and diminished accuracy in detecting small objects, this paper introduces an innovative vision-based perception methodology harnessing the power of deep learning. Central to this approach is the construction of a railway boundary model utilizing a sophisticated track detection method, along with an enhanced UNet semantic segmentation network to achieve autonomous segmentation of diverse track categories. By employing equal interval division and row-by-row traversal, critical track feature points are precisely extracted, and the track linear equation is derived through the least squares method, thus establishing an accurate railway boundary model. We optimized the YOLOv5s detection model in four aspects: incorporating the SE attention mechanism into the Neck network layer to enhance the model's feature extraction capabilities, adding a prediction layer to improve the detection performance for small objects, proposing a linear size scaling method to obtain suitable anchor boxes, and utilizing Inner-IoU to refine the boundary regression loss function, thereby increasing the positioning accuracy of the bounding boxes. We conducted a detection accuracy validation for railway track foreign object intrusion using a self-constructed image dataset. The results indicate that the proposed semantic segmentation model achieved an MIoU of 91.8%, representing a 3.9% improvement over the previous model, effectively segmenting railway tracks. Additionally, the optimized detection model could effectively detect foreign object intrusions on the tracks, reducing missed and false alarms and achieving a 7.4% increase in the mean average precision (IoU = 0.5) compared to the original YOLOv5s model. The model exhibits strong generalization capabilities in scenarios involving small objects. This proposed approach represents an effective exploration of deep learning techniques for railway track foreign object intrusion detection, suitable for use in complex environments to ensure the operational safety of rail lines. [ABSTRACT FROM AUTHOR]

The extraction of typical features of underwater target signals and excellent recognition algorithms are the keys to achieving underwater acoustic target recognition of divers. This paper proposes a feature extraction method for diver signals: frequency−domain multi−sub−band energy (FMSE), aiming to achieve accurate recognition of diver underwater acoustic targets by passive sonar. The impact of the presence or absence of targets, different numbers of targets, different signal−to−noise ratios, and different detection distances on this method was studied based on experimental data under different conditions, such as water pools and lakes. It was found that the FMSE method has the best robustness and performance compared with two other signal feature extraction methods: mel frequency cepstral coefficient filtering and gammatone frequency cepstral coefficient filtering. Combined with the commonly used recognition algorithm of support vector machines, the FMSE method can achieve a comprehensive recognition accuracy of over 94% for frogman underwater acoustic targets. This indicates that the FMSE method is suitable for underwater acoustic recognition of diver targets. [ABSTRACT FROM AUTHOR]

The semantic segmentation of the 3D operating environment represents the key to intelligent mining shovels' autonomous digging and loading operation. However, the complexity of the operating environment of intelligent mining shovels presents challenges, including the variety of scene targets and the uneven number of samples. This results in low accuracy of 3D semantic segmentation and reduces the autonomous operation accuracy of the intelligent mine shovels. To solve these issues, this paper proposes a 3D point cloud semantic segmentation network based on memory enhancement and lightweight attention mechanisms. This model addresses the challenges of an uneven number of sampled scene targets, insufficient extraction of key features to reduce the semantic segmentation accuracy, and an insufficient lightweight level of the model to reduce deployment capability. Firstly, we investigate the memory enhancement learning mechanism, establishing a memory module for key semantic features of the targets. Furthermore, we address the issue of forgetting non-dominant target point cloud features caused by the unbalanced number of samples and enhance the semantic segmentation accuracy. Subsequently, the channel attention mechanism is studied. An attention module based on the statistical characteristics of the channel is established. The adequacy of the expression of the key features is improved by adjusting the weights of the features. This is done in order to improve the accuracy of semantic segmentation further. Finally, the lightweight mechanism is studied by adopting the deep separable convolution instead of conventional convolution to reduce the number of model parameters. Experiments demonstrate that the proposed method can improve the accuracy of semantic segmentation in the 3D scene and reduce the model's complexity. Semantic segmentation accuracy is improved by 7.15% on average compared with the experimental control methods, which contributes to the improvement of autonomous operation accuracy and safety of intelligent mining shovels. [ABSTRACT FROM AUTHOR]

It is difficult to visually detect internal defects in a large transformer with a metal closure. For convenient internal inspection, a micro-robot was adopted, and an inspection method based on an image-enhancement algorithm and an improved deep-learning network was proposed in this paper. Considering the dim environment inside the transformer and the problems of irregular imaging distance and fluctuating supplementary light conditions during image acquisition with the internal-inspection robot, an improved MSRCR algorithm for image enhancement was proposed. It could analyze the local contrast of the image and enhance the details on multiple scales. At the same time, a white-balance algorithm was introduced to enhance the contrast and brightness and solve the problems of overexposure and color distortion. To improve the target recognition performance of complex carbon-trace defects, the SimAM mechanism was incorporated into the Backbone network of the YOLOv8 model to enhance the extraction of carbon-trace features. Meanwhile, the DyHead dynamic detection Head framework was constructed at the output of the YOLOv8 model to improve the perception of local carbon traces with different sizes. To improve the defect target recognition speed of the transformer-inspection robot, a pruning operation was carried out on the YOLOv8 model to remove redundant parameters, realize model lightness, and improve detection efficiency. To verify the effectiveness of the improved algorithm, the detection model was trained and validated with the carbon-trace dataset. The results showed that the MSH-YOLOv8 algorithm achieved an accuracy of 91.80%, which was 3.4 percentage points higher compared to the original YOLOv8 algorithm, and had a significant advantage over other mainstream target-detection algorithms. Meanwhile, the FPS of the proposed algorithm was up to 99.2, indicating that the model computation and model complexity were successfully reduced, which meets the requirements for engineering applications of the transformer internal-inspection robot. [ABSTRACT FROM AUTHOR]

During a heavy traffic flow featuring a substantial number of vehicles, the data reflecting the strain response of asphalt pavement under the vehicle load exhibit notable fluctuations with abnormal values, which can be attributed to the complex operating environment. Thus, there is a need to create a real-time anomalous-data diagnosis system which could effectively extract dynamic strain features, such as peak values and peak separation from the large amount of data. This paper presents a dynamic response signal data analysis method that utilizes the DBSCAN clustering algorithm and the findpeaks function. This method is designed to analyze data collected by sensors installed within the pavement. The first step involves denoising the data using low-pass filters and other techniques. Subsequently, the DBSCAN algorithm, which has been improved using the K-Dist method, is used to diagnose abnormal data after denoising. The refined findpeaks function is further implemented to carry out the adaptive feature extraction of the denoised data which is free from anomalies. The enhanced DBSCAN algorithm is tested via simulation and illustrates its effectiveness while detecting abnormal data in the road dynamic response signal. The findpeaks function enables the relatively accurate identification of peak values, thus leading to the identification of strain signal peaks of complex multi-axle lorries. This study is valuable for efficient data processing and effective information utilization in pavement monitoring. [ABSTRACT FROM AUTHOR]

Two-wheeled non-motorized vehicles (TNVs) have become the primary mode of transportation for short-distance travel among residents in many underdeveloped cities in China due to their convenience and low cost. However, this trend also brings corresponding risks of traffic accidents. Therefore, it is necessary to analyze the driving behavior characteristics of TNVs through their trajectory data in order to provide guidance for traffic safety. Nevertheless, the compact size, agile steering, and high maneuverability of these TNVs pose substantial challenges in acquiring high-precision trajectories. These characteristics complicate the tracking and analysis processes essential for understanding their movement patterns. To tackle this challenge, we propose an enhanced You Only Look Once Version X (YOLOx) model, which incorporates a median pooling-Convolutional Block Attention Mechanism (M-CBAM). This model is specifically designed for the detection of TNVs, and aims to improve accuracy and efficiency in trajectory tracking. Furthermore, based on this enhanced YOLOx model, we have developed a micro-trajectory data mining framework specifically for TNVs. Initially, the paper establishes an aerial dataset dedicated to the detection of TNVs, which then serves as a foundational resource for training the detection model. Subsequently, an augmentation of the Convolutional Block Attention Mechanism (CBAM) is introduced, integrating median pooling to amplify the model's feature extraction capabilities. Subsequently, additional detection heads are integrated into the YOLOx model to elevate the detection rate of small-scale targets, particularly focusing on TNVs. Concurrently, the Deep Sort algorithm is utilized for the precise tracking of vehicle targets. The process culminates with the reconstruction of trajectories, which is achieved through a combination of video stabilization, coordinate mapping, and filtering denoising techniques. The experimental results derived from our self-constructed dataset reveal that the enhanced YOLOx model demonstrates superior detection performance in comparison to other analogous methods. The comprehensive framework accomplishes an average trajectory recall rate of 85% across three test videos. This significant achievement provides a reliable method for data acquisition, which is essential for investigating the micro-level operational mechanisms of TNVs. The results of this study can further contribute to the understanding and improvement of traffic safety on mixed-use roads. [ABSTRACT FROM AUTHOR]

The recognition technology of coal and gangue is one of the key technologies of intelligent mine construction. Aiming at the problems of the low accuracy of coal and gangue recognition models and the difficult recognition of small-target coal and gangue caused by low-illumination and high-dust environments in the coal mine working face, a coal and gangue recognition model based on the improved YOLOv7-tiny target detection algorithm is proposed. This paper proposes three model improvement methods. The coordinate attention mechanism is introduced to improve the feature expression ability of the model. The contextual transformer module is added after the spatial pyramid pooling structure to improve the feature extraction ability of the model. Based on the idea of the weighted bidirectional feature pyramid, the four branch modules in the high-efficiency layer aggregation network are weighted and cascaded to improve the recognition ability of the model for useful features. The experimental results show that the average precision mean of the improved YOLOv7-tiny model is 97.54%, and the FPS is 24.73 f·s−1. Compared with the Faster-RCNN, YOLOv3, YOLOv4, YOLOv4-VGG, YOLOv5s, YOLOv7, and YOLOv7-tiny models, the improved YOLOv7-tiny model has the highest recognition rate and the fastest recognition speed. Finally, the improved YOLOv7-tiny model is verified by field tests in coal mines, which provides an effective technical means for the accurate identification of coal and gangue. [ABSTRACT FROM AUTHOR]

Intelligent fault diagnostics based on deep learning provides a favorable guarantee for the reliable operation of equipment, but a trained deep learning model generally has low prediction accuracy in cross-domain diagnostics. To solve this problem, a deep learning fault diagnosis method based on the reconstructed envelope spectrum is proposed to improve the ability of rolling bearing cross-domain fault diagnostics in this paper. First, based on the envelope spectrum morphology of rolling bearing failures, a standard envelope spectrum is constructed that reveals the unique characteristics of different bearing health states and eliminates the differences between domains due to different bearing speeds and bearing models. Then, a fault diagnosis model was constructed using a convolutional neural network to learn features and complete fault classification. Finally, using two publicly available bearing data sets and one bearing data set obtained by self-experimentation, the proposed method is applied to the data of the fault diagnostics of rolling bearings under different rotational speeds and different bearing types. The experimental results show that, compared with some popular feature extraction methods, the proposed method can achieve high diagnostic accuracy with data at different rotational speeds and different bearing types, and it is an effective method for solving the problem with cross-domain fault diagnostics for rolling bearings. [ABSTRACT FROM AUTHOR]

Object detection is one of the core technologies for autonomous driving. Current road object detection mainly relies on visible light, which is prone to missed detections and false alarms in rainy, night-time, and foggy scenes. Multispectral object detection based on the fusion of RGB and infrared images can effectively address the challenges of complex and changing road scenes, improving the detection performance of current algorithms in complex scenarios. However, previous multispectral detection algorithms suffer from issues such as poor fusion of dual-mode information, poor detection performance for multi-scale objects, and inadequate utilization of semantic information. To address these challenges and enhance the detection performance in complex road scenes, this paper proposes a novel multispectral object detection algorithm called MRD-YOLO. In MRD-YOLO, we utilize interaction-based feature extraction to effectively fuse information and introduce the BIC-Fusion module with attention guidance to fuse different modal information. We also incorporate the SAConv module to improve the model's detection performance for multi-scale objects and utilize the AIFI structure to enhance the utilization of semantic information. Finally, we conduct experiments on two major public datasets, FLIR_Aligned and M3FD. The experimental results demonstrate that compared to other algorithms, the proposed algorithm achieves superior detection performance in complex road scenes. [ABSTRACT FROM AUTHOR]

Underwater images suffer from low contrast and color distortion. In order to improve the quality of underwater images and reduce storage and computational resources, this paper proposes a lightweight model Rep-UWnet to enhance underwater images. The model consists of a fully connected convolutional network and three densely connected RepConv blocks in series, with the input images connected to the output of each block with a Skip connection. First, the original underwater image is subjected to feature extraction by the SimSPPF module and is processed through feature summation with the original one to be produced as the input image. Then, the first convolutional layer with a kernel size of 3 × 3, generates 64 feature maps, and the multi-scale hybrid convolutional attention module enhances the useful features by reweighting the features of different channels. Second, three RepConv blocks are connected to reduce the number of parameters in extracting features and increase the test speed. Finally, a convolutional layer with 3 kernels generates enhanced underwater images. Our method reduces the number of parameters from 2.7 M to 0.45 M (around 83% reduction) but outperforms state-of-the-art algorithms by extensive experiments. Furthermore, we demonstrate our Rep-UWnet effectively improves high-level vision tasks like edge detection and single image depth estimation. This method not only surpasses the contrast method in objective quality, but also significantly improves the contrast, colorimetry, and clarity of underwater images in subjective quality. [ABSTRACT FROM AUTHOR]

Automotive radar is one of the key sensors for intelligent driving. Radar image sequences contain abundant spatial and temporal information, enabling target classification. For existing radar spatiotemporal classifiers, multi-view radar images are usually employed to enhance the information of the target and 3D convolution is employed for spatiotemporal feature extraction. These models consume significant hardware resources and are not applicable to real-time applications. In this paper, RadarTCN, a novel lightweight network, is proposed that achieves high-accuracy online target classification using single-view radar image sequences only. In RadarTCN, 2D convolution and 3D-TCN are employed to extract spatiotemporal features sequentially. To reduce data dimensionality and computational complexity, a multi-layer max pooling down-sampling method is designed in a 2D convolution module. Meanwhile, the 3D-TCN module is improved through residual pruning and causal convolution is introduced for leveraging the performance of online target classification. The experimental results demonstrate that RadarTCN can achieve high-precision online target recognition for both range-angle and range-Doppler map sequences. Compared to the reference models on the CARRADA dataset, RadarTCN exhibits better classification performance, with fewer parameters and lower computational complexity. [ABSTRACT FROM AUTHOR]

Accurate and fast recognition of vehicle license plates from natural scene images is a crucial and challenging task. Existing methods can recognize license plates in simple scenarios, but their performance degrades significantly in complex environments. A novel license plate detection and recognition model YOLOv5-PDLPR is proposed, which employs YOLOv5 target detection algorithm in the license plate detection part and uses the PDLPR algorithm proposed in this paper in the license plate recognition part. The PDLPR algorithm is mainly designed as follows: (1) A Multi-Head Attention mechanism is used to accurately recognize individual characters. (2) A global feature extractor network is designed to improve the completeness of the network for feature extraction. (3) The latest parallel decoder architecture is adopted to improve the inference efficiency. The experimental results show that the proposed algorithm has better accuracy and speed than the comparison algorithms, can achieve real-time recognition, and has high efficiency and robustness in complex scenes. [ABSTRACT FROM AUTHOR]

To address the challenge of accurately locating unmanned aerial vehicles (UAVs) in situations where radar tracking is not feasible and visual observation is difficult, this paper proposes an innovative acoustic source localization method based on improved Empirical Mode Decomposition (EMD) within an adaptive frequency window. In this study, the collected flight signals of UAVs undergo smoothing filtering. Additionally, Robust Empirical Mode Decomposition (REMD) is applied to decompose the signals into Intrinsic Mode Function (IMF) components for spectrum analysis. We introduce a sliding frequency window with adjustable bandwidth, which is automatically determined using a Grey Wolf Optimizer (GWO) with a sliding index. This window is used to lock and extract specific frequencies from the IMFs. Based on predefined criteria, the extracted IMF components are reconstructed, and trigger signal times are analyzed and recorded from these reconstructed IMFs. The time differences between sensor receptions are then calculated. Furthermore, this study introduces the Chan–Taylor localization algorithm based on weighted least squares. This advanced algorithm takes sensor time delay parameters as input and solves a set of nonlinear equations to determine the target's location. Simulations and real-world signal tests are used to validate the robustness and performance of the proposed method. The results indicate that the localization error remains below 5% within a 15 m × 15 m measurement area. This provides an efficient and real-time method for detecting the location of small UAVs. [ABSTRACT FROM AUTHOR]

This work addresses the challenge of calibrating multiple solid-state LIDAR systems. The study focuses on three different solid-state LIDAR sensors that implement different hardware designs, leading to distinct scanning patterns for each system. Consequently, detecting corresponding points between the point clouds generated by these LIDAR systems—as required for calibration—is a complex task. To overcome this challenge, this paper proposes a method that involves several steps. First, the measurement data are preprocessed to enhance its quality. Next, features are extracted from the acquired point clouds using the Fast Point Feature Histogram method, which categorizes important characteristics of the data. Finally, the extrinsic parameters are computed using the Fast Global Registration technique. The best set of parameters for the pipeline and the calibration success are evaluated using the normalized root mean square error. In a static real-world indoor scenario, a minimum root mean square error of 7 c m was achieved. Importantly, the paper demonstrates that the presented approach is suitable for online use, indicating its potential for real-time applications. By effectively calibrating the solid-state LIDAR systems and establishing point correspondences, this research contributes to the advancement of multi-LIDAR fusion and facilitates accurate perception and mapping in various fields such as autonomous driving, robotics, and environmental monitoring. [ABSTRACT FROM AUTHOR]

The traditional rearview mirror method cannot fully guarantee safety when driving trucks. RGB and infrared images collected by cameras are used for registration and recognition, so as to achieve the perception of surroundings and ensure safe driving. The traditional scale-invariant feature transform (SIFT) algorithm has a mismatching rate, and the YOLO algorithm has an optimization space in feature extraction. To address these issues, this paper proposes a truck surround sensing technique based on multi-features and an improved YOLOv5 algorithm. Firstly, the edge corner points and infrared features of the preset target region are extracted, and then a feature point set containing the improved SIFT algorithm is generated for registration. Finally, the YOLOv5 algorithm is improved by fusing infrared features and introducing a composite prediction mechanism at the prediction end. The simulation results show that, on average, the image stitching accuracy is improved by 17%, the time is reduced by 89%, and the target recognition accuracy is improved by 2.86%. The experimental results show that this method can effectively perceive the surroundings of trucks, accurately identify targets, and reduce the missed alarm rate and false alarm rate. [ABSTRACT FROM AUTHOR]

With the rapid advancement of remote-sensing technology, the spectral information obtained from hyperspectral remote-sensing imagery has become increasingly rich, facilitating detailed spectral analysis of Earth's surface objects. However, the abundance of spectral information presents certain challenges for data processing, such as the "curse of dimensionality" leading to the "Hughes phenomenon", "strong correlation" due to high resolution, and "nonlinear characteristics" caused by varying surface reflectances. Consequently, dimensionality reduction of hyperspectral data emerges as a critical task. This paper begins by elucidating the principles and processes of hyperspectral image dimensionality reduction based on manifold theory and learning methods, in light of the nonlinear structures and features present in hyperspectral remote-sensing data, and formulates a dimensionality reduction process based on manifold learning. Subsequently, this study explores the capabilities of feature extraction and low-dimensional embedding for hyperspectral imagery using manifold learning approaches, including principal components analysis (PCA), multidimensional scaling (MDS), and linear discriminant analysis (LDA) for linear methods; and isometric mapping (Isomap), locally linear embedding (LLE), Laplacian eigenmaps (LE), Hessian locally linear embedding (HLLE), local tangent space alignment (LTSA), and maximum variance unfolding (MVU) for nonlinear methods, based on the Indian Pines hyperspectral dataset and Pavia University dataset. Furthermore, the paper investigates the optimal neighborhood computation time and overall algorithm runtime for feature extraction in hyperspectral imagery, varying by the choice of neighborhood k and intrinsic dimensionality d values across different manifold learning methods. Based on the outcomes of feature extraction, the study examines the classification experiments of various manifold learning methods, comparing and analyzing the variations in classification accuracy and Kappa coefficient with different selections of neighborhood k and intrinsic dimensionality d values. Building on this, the impact of selecting different bandwidths t for the Gaussian kernel in the LE method and different Lagrange multipliers λ for the MVU method on classification accuracy, given varying choices of neighborhood k and intrinsic dimensionality d, is explored. Through these experiments, the paper investigates the capability and effectiveness of different manifold learning methods in feature extraction and dimensionality reduction within hyperspectral imagery, as influenced by the selection of neighborhood k and intrinsic dimensionality d values, identifying the optimal neighborhood k and intrinsic dimensionality d value for each method. A comparison of classification accuracies reveals that the LTSA method yields superior classification results compared to other manifold learning approaches. The study demonstrates the advantages of manifold learning methods in processing hyperspectral image data, providing an experimental reference for subsequent research on hyperspectral image dimensionality reduction using manifold learning methods. [ABSTRACT FROM AUTHOR]

Radar data can be presented in various forms, unlike visible data. In the field of radar target recognition, most current work involves point cloud data due to computing limitations, but this form of data lacks useful information. This paper proposes a semantic segmentation network to process high-dimensional data and enable automatic radar target recognition. Rather than relying on point cloud data, which is common in current radar automatic target recognition algorithms, the paper suggests using a radar heat map of high-dimensional data to increase the efficiency of radar data use. The radar heat map provides more complete information than point cloud data, leading to more accurate classification results. Additionally, this paper proposes a dimension collapse module based on a vision transformer for feature extraction between two modules with dimension differences during dimension changes in high-dimensional data. This module is easily extendable to other networks with high-dimensional data collapse requirements. The network's performance is verified using a real radar dataset, showing that the radar semantic segmentation network based on a vision transformer has better performance and fewer parameters compared to segmentation networks that use other dimensional collapse methods. [ABSTRACT FROM AUTHOR]

Epilepsy does great harm to the human body, and even threatens human life when it is serious. Therefore, research focused on the diagnosis and treatment of epilepsy holds paramount clinical significance. In this paper, we utilized variational modal decomposition (VMD) and an enhanced grey wolf algorithm to detect epileptic electroencephalogram (EEG) signals. Data were extracted from each patient's preseizure period and seizure period of 200 s each, with every 2 s as a segment, meaning 100 data points could be obtained for each patient's health period as well as 100 data points for each patient's epilepsy period. Variational modal decomposition (VMD) was used to obtain the corresponding intrinsic modal function (VMF) of the data. Then, the differential entropy (DE) and high frequency detection (HFD) of each VMF were extracted as features. The improved grey wolf algorithm is adopted for a selected channel to improve the maximum value of the channel. Finally, the EEG signal samples were classified using a support vector machine (SVM) classifier to achieve the accurate detection of epilepsy EEG signals. Experimental results show that the accuracy, sensitivity and specificity of the proposed method can reach 98.3%, 98.9% and 98.5%, respectively. The proposed algorithm in this paper can be used as an index to detect epileptic seizures and has certain guiding significance for the early diagnosis and effective treatment of epileptic patients. [ABSTRACT FROM AUTHOR]

With the sustainable development of intelligent fisheries, accurate underwater fish segmentation is a key step toward intelligently obtaining fish morphology data. However, the blurred, distorted and low-contrast features of fish images in underwater scenes affect the improvement in fish segmentation accuracy. To solve these problems, this paper proposes a method of underwater fish segmentation based on an improved PSPNet network (IST-PSPNet). First, in the feature extraction stage, to fully perceive features and context information of different scales, we propose an iterative attention feature fusion mechanism, which realizes the depth mining of fish features of different scales and the full perception of context information. Then, a SoftPool pooling method based on fast index weighted activation is used to reduce the numbers of parameters and computations while retaining more feature information, which improves segmentation accuracy and efficiency. Finally, a triad attention mechanism module, triplet attention (TA), is added to the different scale features in the golden tower pool module so that the space attention can focus more on the specific position of the fish body features in the channel through cross-dimensional interaction to suppress the fuzzy distortion caused by background interference in underwater scenes. Additionally, the parameter-sharing strategy is used in this process to make different scale features share the same learning weight parameters and further reduce the numbers of parameters and calculations. The experimental results show that the method presented in this paper yielded better results for the DeepFish underwater fish image dataset than other methods, with 91.56% for the Miou, 46.68 M for Params and 40.27 G for GFLOPS. In the underwater fish segmentation task, the method improved the segmentation accuracy of fish with similar colors and water quality backgrounds, improved fuzziness and small size and made the edge location of fish clearer. [ABSTRACT FROM AUTHOR]

When performing robotic automatic sorting and assembly operations of multi-category hardware, there are some problems with the existing convolutional neural network visual recognition algorithms, such as large computing power consumption, low recognition efficiency, and a high rate of missed detection and false detection. A novel efficient convolutional neural algorithm for multi-category aliasing hardware recognition is proposed in this paper. On the basis of SSD, the novel algorithm uses Resnet-50 instead of VGG16 as the backbone feature extraction network, and it integrates ECA-Net and Improved Spatial Attention Block (ISAB): two attention mechanisms to improve the ability of learning and extract target features. Then, we pass the weighted features to extra feature layers to build an improved SSD algorithm. At last, in order to compare the performance difference between the novel algorithm and the existing algorithms, three kinds of hardware with different sizes are chosen to constitute an aliasing scene that can simulate an industrial site, and some comparative experiments have been completed finally. The experimental results show that the novel algorithm has an mAP of 98.20% and FPS of 78, which are better than Faster R-CNN, YOLOv4, YOLOXs, EfficientDet-D1, and original SSD in terms of comprehensive performance. The novel algorithm proposed in this paper can improve the efficiency of robotic sorting and assembly of multi-category hardware. [ABSTRACT FROM AUTHOR]

Accurate and rapid response in complex driving scenarios is a challenging problem in autonomous driving. If a target is detected, the vehicle will not be able to react in time, resulting in fatal safety accidents. Therefore, the application of driver assistance systems requires a model that can accurately detect targets in complex scenes and respond quickly. In this paper, a lightweight feature extraction model, ShuffDet, is proposed to replace the CSPDark53 model used by YOLOX by improving the YOLOX algorithm. At the same time, an attention mechanism is introduced into the path aggregation feature pyramid network (PAFPN) to make the network focus more on important information in the network, thereby improving the accuracy of the model. This model, which combines two methods, is called ShuffYOLOX, and it can improve the accuracy of the model while keeping it lightweight. The performance of the ShuffYOLOX model on the KITTI dataset is tested in this paper, and the experimental results show that compared to the original network, the mean average precision (mAP) of the ShuffYOLOX model on the KITTI dataset reaches 92.20%. In addition, the number of parameters of the ShuffYOLOX model is reduced by 34.57%, the Gflops are reduced by 42.19%, and the FPS is increased by 65%. Therefore, the ShuffYOLOX model is very suitable for autonomous driving applications. [ABSTRACT FROM AUTHOR]

As the demand for Internet access increases, malicious traffic on the Internet has soared also. In view of the fact that the existing malicious-traffic-identification methods suffer from low accuracy, this paper proposes a malicious-traffic-identification method based on contrastive learning. The proposed method is able to overcome the shortcomings of traditional methods that rely on labeled samples and is able to learn data feature representations carrying semantic information from unlabeled data, thus improving the model accuracy. In this paper, a new malicious traffic feature extraction model based on a Transformer is proposed. Employing a self-attention mechanism, the proposed feature extraction model can extract the bytes features of malicious traffic by performing calculations on the malicious traffic, thereby realizing the efficient identification of malicious traffic. In addition, a bidirectional GLSTM is introduced to extract the timing features of malicious traffic. The experimental results show that the proposed method is superior to the latest published methods in terms of accuracy and F1 score. [ABSTRACT FROM AUTHOR]

Existing pavement defect detection models face challenges in balancing detection accuracy and speed while being constrained by large parameter sizes, hindering deployment on edge terminal devices with limited computing resources. To address these issues, this paper proposes a lightweight pavement defect detection model based on an improved YOLOv7 architecture. The model introduces four key enhancements: first, the incorporation of the SPPCSPC_Group grouped space pyramid pooling module to reduce the parameter load and computational complexity; second, the utilization of the K-means clustering algorithm for generating anchors, accelerating model convergence; third, the integration of the Ghost Conv module, enhancing feature extraction while minimizing the parameters and calculations; fourth, introduction of the CBAM convolution module to enrich the semantic information in the last layer of the backbone network. The experimental results demonstrate that the improved model achieved an average accuracy of 91%, and the accuracy in detecting broken plates and repaired models increased by 9% and 8%, respectively, compared to the original model. Moreover, the improved model exhibited reductions of 14.4% and 29.3% in the calculations and parameters, respectively, and a 29.1% decrease in the model size, resulting in an impressive 80 FPS (frames per second). The enhanced YOLOv7 successfully balances parameter reduction and computation while maintaining high accuracy, making it a more suitable choice for pavement defect detection compared with other algorithms. [ABSTRACT FROM AUTHOR]

Image inpainting is an active area of research in image processing that focuses on reconstructing damaged or missing parts of an image. The advent of deep learning has greatly advanced the field of image restoration in recent years. While there are many existing methods that can produce high-quality restoration results, they often struggle when dealing with images that have large missing areas, resulting in blurry and artifact-filled outcomes. This is primarily because of the presence of invalid information in the inpainting region, which interferes with the inpainting process. To tackle this challenge, the paper proposes a novel approach called separable mask update convolution. This technique automatically learns and updates the mask, which represents the missing area, to better control the influence of invalid information within the mask area on the restoration results. Furthermore, this convolution method reduces the number of network parameters and the size of the model. The paper also introduces a regional normalization technique that collaborates with separable mask update convolution layers for improved feature extraction, thereby enhancing the quality of the restored image. Experimental results demonstrate that the proposed method performs well in restoring images with large missing areas and outperforms state-of-the-art image inpainting methods significantly in terms of image quality. [ABSTRACT FROM AUTHOR]

The detection algorithm commonly misses obscured pedestrians in traffic scenes with a high pedestrian density because mutual occlusion among pedestrians reduces the prediction box score of the concealed pedestrians. The paper uses the YOLOv7 algorithm as the baseline and makes the following three improvements by investigating the variables influencing the detection method's performance: First, the backbone network of the YOLOv7 algorithm is replaced with the lightweight feature extraction network Mobilenetv3 since the pedestrian detection algorithm frequently needs to be deployed in driverless mobile, which requires a fast operating speed of the algorithm; second, a high-resolution feature pyramid structure is suggested for the issue of missed detection of hidden pedestrians, which upscales the feature maps generated from the feature pyramid to increase the resolution of the output feature maps and introduces shallow feature maps to strengthen the distinctions between adjacent sub-features to enhance the network's ability to extract features for the visible area of hidden pedestrians and small-sized pedestrians in order to produce deeper features with greater differentiation for pedestrians; and the third is to suggest a detection head based on an attention mechanism that is employed to lower the confidence level of target neighboring sub-features, lower the quantity of redundant detection boxes, and lower the following NMS computation. The mAP of the suggested approach in this work achieves 89.75%, which is 9.5 percentage points better than the YOLOv7 detection algorithm, according to experiments on the CrowdHuman pedestrian-intensive dataset. The algorithm proposed in this paper can considerably increase the detection performance of the detection algorithm, particularly for obscured pedestrians and small-sized pedestrians in the dataset, according to the experimental effect plots. [ABSTRACT FROM AUTHOR]

Gait phase recognition is of great importance in the development of rehabilitation devices. The advantages of Long Short-Term Memory (LSTM) and Convolutional Neural Network (CNN) are combined (LSTM-CNN) in this paper, then a gait phase recognition method based on LSTM-CNN neural network model is proposed. In the LSTM-CNN model, the LSTM layer is used to process temporal sequences and the CNN layer is used to extract features A wireless sensor system including six inertial measurement units (IMU) fixed on the six positions of the lower limbs was developed. The difference in the gait recognition performance of the LSTM-CNN model was estimated using different groups of input data collected by seven different IMU grouping methods. Four phases in a complete gait were considered in this paper including the supporting phase with the right hill strike (SU-RHS), left leg swimming phase (SW-L), the supporting phase with the left hill strike (SU-LHS), and right leg swimming phase (SW-R). The results show that the best performance of the model in gait recognition appeared based on the group of data from all the six IMUs, with the recognition precision and macro-F1 unto 95.03% and 95.29%, respectively. At the same time, the best phase recognition accuracy for SU-RHS and SW-R appeared and up to 96.49% and 95.64%, respectively. The results also showed the best phase recognition accuracy (97.22%) for SW-L was acquired based on the group of data from four IMUs located at the left and right thighs and shanks. Comparably, the best phase recognition accuracy (97.86%) for SU-LHS was acquired based on the group of data from four IMUs located at left and right shanks and feet. Ulteriorly, a novel gait recognition method based on Data Pre-Filtering Long Short-Term Memory and Convolutional Neural Network (DPF-LSTM-CNN) model was proposed and its performance for gait phase recognition was evaluated. The experiment results showed that the recognition accuracy reached 97.21%, which was the highest compared to Deep convolutional neural networks (DCNN) and CNN-LSTM. [ABSTRACT FROM AUTHOR]

This study introduces a novel nonlinear dynamic analysis method, known as beluga whale optimization–slope entropy (BWO-SlEn), to address the challenge of recognizing sea state signals (SSSs) in complex marine environments. A method of underwater acoustic signal recognition based on BWO-SlEn and one-dimensional convolutional neural network (1D-CNN) is proposed. Firstly, particle swarm optimization–slope entropy (PSO-SlEn), BWO-SlEn, and Harris hawk optimization–slope entropy (HHO-SlEn) were used for feature extraction of noise signal and SSS. After 1D-CNN classification, BWO-SlEn were found to have the best recognition effect. Secondly, fuzzy entropy (FE), sample entropy (SE), permutation entropy (PE), and dispersion entropy (DE) were used to extract the signal features. After 1D-CNN classification, BWO-SlEn and 1D-CNN were found to have the highest recognition rate compared with them. Finally, compared with the other six recognition methods, the recognition rates of BWO-SlEn and 1D-CNN for the noise signal and SSS are at least 6% and 4.75% higher, respectively. Therefore, the BWO-SlEn and 1D-CNN recognition methods proposed in this paper are more effective in the application of SSS recognition. [ABSTRACT FROM AUTHOR]

To address the challenges faced in the prediction of rolling bearing life, where temporal signals are affected by noise, making fault feature extraction difficult and resulting in low prediction accuracy, a method based on optimal time–frequency spectra and the DenseNet-ALSTM network is proposed. Firstly, a signal reconstruction method is introduced to enhance vibration signals. This involves using the CEEMDAN deconvolution method combined with the Teager energy operator for signal reconstruction, aiming to denoise the signals and highlight fault impacts. Subsequently, a method based on the snake optimizer (SO) is proposed to optimize the generalized S-transform (GST) time–frequency spectra of the enhanced signals, obtaining the optimal time–frequency spectra. Finally, all sample data are transformed into the optimal time–frequency spectrum set and input into the DenseNet-ALSTM network for life prediction. The comparison experiment and ablation experiment show that the proposed method has high prediction accuracy and ideal prediction performance. The optimization terms used in different contexts in this paper are due to different optimization methods, specifically the CEEMDAN method. [ABSTRACT FROM AUTHOR]