Search

This paper presents a comprehensive exploration of a hybrid energy system that integrates wind turbines with photovoltaics (PVs) to address the intermittent nature of electricity production from these sources. The necessity for such technology arises from the sporadic nature of electricity generated by PV cells and wind turbines. The envisioned outcome is an emissions-free, more efficient alternative to traditional energy sources. A variety of optimization techniques are utilized, specifically the Particle Swarm Optimization (PSO) algorithm and Electric Eel Foraging Optimization (EEFO), to achieve optimal power regulation and seamless integration with the public grid, as well as to mitigate anticipated loading issues. The employed mathematical modeling and simulation techniques are used to assess the effectiveness of EEFO in optimizing the operation of grid-connected PV and wind turbine hybrid systems. In this paper, the optimization methods applied to the system's architecture are described in detail, providing a clear understanding of the intricate nature of the approach. The efficacy of these optimization strategies is rigorously evaluated through simulations of diverse operating scenarios using MATLAB/SIMULINK. The results demonstrate that the proposed optimization strategies are not only capable of precisely and swiftly compensating for linked loads, but also effectively controlling the energy supply to maintain the load's power at the desired level. The findings underscore the potential of this hybrid energy system to offer a sustainable and reliable solution for meeting power demands, contributing to the advancement of clean and efficient energy technologies. The results demonstrate the capability of the proposed approach to improve system performance, maximize energy yield, and enhance grid integration, thereby contributing to the advancement of renewable energy technologies and sustainable energy systems. [ABSTRACT FROM AUTHOR]

With the development of deep fusion intelligent control technology and the application of low-carbon energy, the number of renewable energy sources connected to the distribution grid has been increasing year by year, gradually replacing traditional distribution grids with active distribution grids. In addition, as an important component of the distribution grid, substations have a complex internal environment and numerous devices. The problems of untimely defect detection and slow response during intelligent inspections are particularly prominent, posing risks and challenges to the safe and stable operation of active distribution grids. To address these issues, this paper proposes a high-performance and lightweight substation defect detection model called YOLO-Substation-large (YOLO-SS-large) based on YOLOv5m. The model improves lightweight performance based upon the FasterNet network structure and obtains the F-YOLOv5m model. Furthermore, in order to enhance the detection performance of the model for small object defects in substations, the normalized Wasserstein distance (NWD) and complete intersection over union (CIoU) loss functions are weighted and fused to design a novel loss function called NWD-CIoU. Lastly, based on the improved model mentioned above, the dynamic head module is introduced to unify the scale-aware, spatial-aware, and task-aware attention of the object detection heads of the model. Compared to the YOLOv5m model, the YOLO-SS-Large model achieves an average precision improvement of 0.3%, FPS enhancement of 43.5%, and parameter reduction of 41.0%. This improved model demonstrates significantly enhanced comprehensive performance, better meeting the requirements of the speed and precision for substation defect detection, and plays an important role in promoting the informatization and intelligent construction of active distribution grids. [ABSTRACT FROM AUTHOR]

This paper presents a novel method for forecasting the impact of cloud cover on photovoltaic (PV) fields in the nowcasting term, utilizing PV panels as sensors in a combination of physical and persistence models and integrating energy storage system control. The proposed approach entails simulating a power network consisting of a 22 kV renewable energy source and energy storage, enabling the evaluation of network behavior in comparison to the national grid. To optimize computational efficiency, the authors develop an equivalent model of the PV + energy storage module, accurately simulating system behavior while accounting for weather conditions, particularly cloud cover. Moreover, the authors introduce a control system model capable of responding effectively to network dynamics and providing comprehensive control of the energy storage system using PID controllers. Precise power forecasting is essential for maintaining power continuity, managing overall power-system ramp rates, and ensuring grid stability. The adaptability of our method to integrate with solar fencing systems serves as a testament to its innovative nature and its potential to contribute significantly to the renewable energy field. The authors also assess various scenarios against the grid to determine their impact on grid stability. The research findings indicate that the integration of energy storage and the proposed forecasting method, which combines physical and persistence models, offers a promising solution for effectively managing grid stability. [ABSTRACT FROM AUTHOR]

Harmonic and interharmonic content in power system signals is increasing with the development of renewable energy generation and power electronic devices. These multiple signal components can seriously degrade power quality, trip thermal generators, cause oscillations, and threaten system stability, especially the interharmonic tones with positive damping factors. The first step to mitigate these adverse effects is to accurately and quickly monitor signal features, including frequency, damping factor, amplitude, and phase. This paper proposes a concise and robust index to identify the number of modes present in the signal using the singular values of the Hankel matrix and discusses the scope of its application by testing the influence of various factors. Next, the simplified matrix pencil theory is employed to estimate the signal component frequency and damping factor. Then their estimates are considered in the modified least-squares algorithm to extract the wideband multi-component phasors accurately. Finally, this paper designs a series of scenarios considering varying signal frequency, damping factor, amplitude, and phase to test the proposed algorithm thoroughly. The results verify that the proposed method can achieve a maximum total vector error of less than 1.5%, which is more accurate than existing phasor estimators in various signal environments. The high accuracy of the proposed method is because it considers both the estimation of the frequency number and the effect of signal damping. [ABSTRACT FROM AUTHOR]

The accurate measurement and the investigation of electromagnetic transients are becoming more important, especially with the increasing integration of renewable energy sources into the power grid. These sources introduce new transient phenomena due to the extensive use of power electronics. To achieve this, the measurement devices must have a broadband response capable of measuring fast transients. This paper presents a capacitive electric field sensor-based measurement system to measure transient overvoltages in high-voltage substations. The concept and design of the measurement system are first presented. Then, the design and concept are validated using tests performed in a high-voltage laboratory. Afterwards, two different calibration techniques are discussed: the simplified method (SM) and the coupling capacitance compensation (CCC) method. Finally, three recorded transients are evaluated using the calibration methods. The investigation revealed that the SM tends to overestimate the maximum overvoltage, highlighting the CCC method as a more suitable approach for calibrating transient overvoltage measurements. This measurement system has been validated using various measurements and can be an efficient and flexible solution for the long-term monitoring of transient overvoltages in high-voltage substations. [ABSTRACT FROM AUTHOR]

This paper delves into the application of vibration-based energy harvesting to power environmental sensor nodes, a critical component of modern data collection systems. These sensor nodes play a crucial role in structural health monitoring, providing essential data on external conditions that can affect the health and performance of structures. We investigate the feasibility and efficiency of utilizing piezoelectric vibration energy harvesters to sustainably power environmental wireless sensor nodes on the one hand. On the other hand, we exploit different approaches to minimize the sensor node's power consumption and maximize its efficiency. The investigations consider various sensor node platforms and assess their performance under different voltage levels and broadcast frequencies. The findings reveal that optimized harvester designs enable real-time data broadcasting with short intervals, ranging from 1 to 3 s, expanding the horizons of environmental monitoring, and show that in case the system includes a battery as a backup plan, the battery's lifetime can be extended up to 9 times. This work underscores the potential of vibration energy harvesting as a viable solution for powering sensor nodes, enhancing their autonomy, and reducing maintenance costs in remote and challenging environments. It opens doors to broader applications of sustainable energy sources in environmental monitoring and data collection systems. [ABSTRACT FROM AUTHOR]

Photovoltaic (PV) power prediction plays a critical role amid the accelerating adoption of renewable energy sources. This paper introduces a bidirectional long short-term memory (BiLSTM) deep learning (DL) model designed for forecasting photovoltaic power one hour ahead. The dataset under examination originates from a small PV installation located at the Polytechnic School of the University of Alcala. To improve the quality of historical data and optimize model performance, a robust data preprocessing algorithm is implemented. The BiLSTM model is synergistically combined with a Bayesian optimization algorithm (BOA) to fine-tune its primary hyperparameters, thereby enhancing its predictive efficacy. The performance of the proposed model is evaluated across diverse meteorological and seasonal conditions. In deterministic forecasting, the findings indicate its superiority over alternative models employed in this research domain, specifically a multilayer perceptron (MLP) neural network model and a random forest (RF) ensemble model. Compared with the MLP and RF reference models, the proposed model achieves reductions in the normalized mean absolute error (nMAE) of 75.03% and 77.01%, respectively, demonstrating its effectiveness in this type of prediction. Moreover, interval prediction utilizing the bootstrap resampling method is conducted, with the acquired prediction intervals carefully adjusted to meet the desired confidence levels, thereby enhancing the robustness and flexibility of the predictions. [ABSTRACT FROM AUTHOR]

This paper provides a comprehensive review of the applications of smart meters in the control and optimisation of power grids to support a smooth energy transition towards the renewable energy future. The smart grids become more complicated due to the presence of small-scale low inertia generators and the implementation of electric vehicles (EVs), which are mainly based on intermittent and variable renewable energy resources. Optimal and reliable operation of this environment using conventional model-based approaches is very difficult. Advancements in measurement and communication technologies have brought the opportunity of collecting temporal or real-time data from prosumers through Advanced Metering Infrastructure (AMI). Smart metering brings the potential of applying data-driven algorithms for different power system operations and planning services, such as infrastructure sizing and upgrade and generation forecasting. It can also be used for demand-side management, especially in the presence of new technologies such as EVs, 5G/6G networks and cloud computing. These algorithms face privacy-preserving and cybersecurity challenges that need to be well addressed. This article surveys the state-of-the-art of each of these topics, reviewing applications, challenges and opportunities of using smart meters to address them. It also stipulates the challenges that smart grids present to smart meters and the benefits that smart meters can bring to smart grids. Furthermore, the paper is concluded with some expected future directions and potential research questions for smart meters, smart grids and their interplay. [ABSTRACT FROM AUTHOR]

The integration of renewable energy sources, electric vehicles, and other electrical assets has introduced complexities in monitoring and controlling power networks. Consequently, numerous grid nodes have been equipped with sensors and complex measurement systems to enhance network observability. Additionally, real-time power network simulators have become crucial tools for predicting and estimating the behavior of electrical quantities at different network components, such as nodes, branches, and assets. In this paper, a new user-friendly model for Rogowski coils is presented and validated. The model's simplicity stems from utilizing information solely from the Rogowski coil datasheet. By establishing the input/output relationship, the output of the Rogowski coil is obtained. The effectiveness and accuracy of the proposed model are tested using both simulations and commercially available Rogowski coils. The results confirm that the model is simple, accurate, and easily implementable in various simulation environments for a wide range of applications and purposes. [ABSTRACT FROM AUTHOR]

The integration of renewable energy sources on a large scale in the electrical energy distribution systems, as well as the widespread of non-linear loads, has led to a significant increase in power quality (PQ) disturbances. For this reason, PQ monitoring is also becoming a key task in medium voltage (MV) grids. The measurement of PQ at MV levels can only be performed using instrument transformers (ITs) to scale down the level of voltage and current to levels suitable for the input stage of PQ instruments. However, no international standards currently require the verification of the errors introduced by ITs in the measurement of PQ phenomena. Moreover, this issue is only partially addressed in the scientific literature, where papers dealing with specific and limited aspects of the problem can be found. For this reason, this paper aims to comprehensively assess the issue, proposing IT accuracy verification tests for different PQ parameters. First, a set of PQ phenomena relevant for IT testing is chosen, as well as the associated ranges of variation, based on a review of the enforced standards and the scientific literature. For each selected PQ phenomenon, possible performance indices and test waveforms are proposed. Finally, the proposed procedure is validated by applying it to the characterization of two different types of commercial voltage transformers. [ABSTRACT FROM AUTHOR]

Instrument transformers (ITs) play a key role in electrical power systems, facilitating the accurate monitoring and measurement of electrical quantities. They are essential for measurement, protection, and metering in transmission and distribution grids and accurately reducing the grid voltage and current for low-voltage input instrumentation. With the increase in renewable energy sources, electronic converters, and electric vehicles connected to power grids, ITs now face challenging distorted conditions that differ from the nominal ones. The study presented in this paper is a collaborative work between national metrology institutes and universities that analyzes IT performance in measuring distorted voltages and currents in medium-voltage grids under realistic conditions. Both current and voltage measuring transformers are examined, considering influence quantities like the temperature, mechanical vibration, burden, adjacent phases, and proximity effects. The study provides detailed insights into measurement setups and procedures, and it quantifies potential errors arising from IT behavior in measuring distorted signals in the presence of the various considered influence quantities and their combinations. The main findings reveal that the temperature has the most evident impact on the inductive voltage transformer performance, as well as the burden, causing significant changes in ratio error and phase displacement at the lower temperatures. As for low-power ITs, establishing a priori the effects of adjacent phases and proximity on the frequency responses of low-power ITs is a complex matter, because of their different characteristics and construction solutions. [ABSTRACT FROM AUTHOR]

The increasing penetration of renewable energy sources tends to redirect the power systems community's interest from the traditional power grid model towards the smart grid framework. During this transition, load forecasting for various time horizons constitutes an essential electric utility task in network planning, operation, and management. This paper presents a novel mixed power-load forecasting scheme for multiple prediction horizons ranging from 15 min to 24 h ahead. The proposed approach makes use of a pool of models trained by several machine-learning methods with different characteristics, namely neural networks, linear regression, support vector regression, random forests, and sparse regression. The final prediction values are calculated using an online decision mechanism based on weighting the individual models according to their past performance. The proposed scheme is evaluated on real electrical load data sensed from a high voltage/medium voltage substation and is shown to be highly effective, as it results in R2 coefficient values ranging from 0.99 to 0.79 for prediction horizons ranging from 15 min to 24 h ahead, respectively. The method is compared to several state-of-the-art machine-learning approaches, as well as a different ensemble method, producing highly competitive results in terms of prediction accuracy. [ABSTRACT FROM AUTHOR]

In a modern power system, reducing carbon emissions has become a significant goal in mitigating the impact of global warming. Therefore, renewable energy sources, particularly wind-power generation, have been extensively implemented in the system. Despite the advantages of wind power, its uncertainty and randomness lead to critical security, stability, and economic issues in the power system. Recently, multi-microgrid systems (MMGSs) have been considered as a suitable wind-power deployment candidate. Although wind power can be efficiently utilized by MMGSs, uncertainty and randomness still have a significant impact on the dispatching and operation of the system. Therefore, to address the wind power uncertainty issue and achieve an optimal dispatching strategy for MMGSs, this paper presents an adjustable robust optimization (ARO) model based on meteorological clustering. Firstly, the maximum relevance minimum redundancy (MRMR) method and the CURE clustering algorithm are employed for meteorological classification in order to better identify wind patterns. Secondly, a conditional generative adversarial network (CGAN) is adopted to enrich the wind-power datasets with different meteorological patterns, resulting in the construction of ambiguity sets. Thirdly, the uncertainty sets that are finally employed by the ARO framework to establish a two-stage cooperative dispatching model for MMGS can be derived from the ambiguity sets. Additionally, stepped carbon trading is introduced to control the carbon emissions of MMGSs. Finally, the alternative direction method of multipliers (ADMM) and the column and constraint generation (C&CG) algorithm are adopted to achieve a decentralized solution for the dispatching model of MMGSs. Case studies indicate that the presented model has a great performance in improving the wind-power description accuracy, increasing cost efficiency, and reducing system carbon emissions. However, the case studies also report that the approach consumes a relative long running time. Therefore, in future research, the solution algorithm will be further improved for the purpose of raising the efficiency of the solution. [ABSTRACT FROM AUTHOR]

The problem of energy optimization for Internet of Things (IoT) devices is crucial for two reasons. Firstly, IoT devices powered by renewable energy sources have limited energy resources. Secondly, the aggregate energy requirement for these small and low-powered devices is translated into significant energy consumption. Existing works show that a significant portion of an IoT device's energy is consumed by the radio sub-system. With the emerging sixth generation (6G), energy efficiency is a major design criterion for significantly increasing the IoT network's performance. To solve this issue, this paper focuses on maximizing the energy efficiency of the radio sub-system. In wireless communications, the channel plays a major role in determining energy requirements. Therefore, a mixed-integer nonlinear programming problem is formulated to jointly optimize power allocation, sub-channel allocation, user selection, and the activated remote radio units (RRUs) in a combinatorial approach according to the channel conditions. Although it is an NP-hard problem, the optimization problem is solved through fractional programming properties, converting it into an equivalent tractable and parametric form. The resulting problem is then solved optimally by using the Lagrangian decomposition method and an improved Kuhn–Munkres algorithm. The results show that the proposed technique significantly improves the energy efficiency of IoT systems as compared to the state-of-the-art work. [ABSTRACT FROM AUTHOR]

Renewable energy sources are a growing branch of industry. One such source is wind farms, which have significantly increased their number over recent years. Alongside the increased number of turbines, maintenance problems are growing. There is a need for newer and less intrusive predictive maintenance methods. About 40% of all turbine failures are due to bearing failure. This paper presents a modified neural direct classifier method using raw accelerometer measurements as input. This proprietary platform allows for better damage prediction results than convolutional networks in vibration spectrum image analysis. It operates in real time and without signal processing methods converting the signal to a time–frequency spectrogram. Image processing methods can extract features from a set of preset features and based on their importance. The proposed method is not based on feature extraction from image data but on automatically finding a set of features from raw tabular data. This fact significantly reduces the computational cost of detection and improves the failure detection accuracy compared to the classical methods. The model achieved a precision of 99.32% on the validation set, and 96.3% during bench testing. These results were an improvement over the method that classifies time–frequency spectrograms of 97.76% for the validation set and 90.8% for the real-world tests, respectively. [ABSTRACT FROM AUTHOR]

Recent years have seen the rapid development of technologies in Smart Grids (SGs) to enhance electricity networks with digital and data communication technologies. SGs can proactively detect, react, and respond to dynamic changes in the network. SGs can also enhance the efficiency and reliability of electricity supplies and promote the integration of renewable energy sources. Smart Meters (SMs) are often seen as the first step to a successful implementation of SGs. While SMs enable Utility Providers and consumers to obtain near real-time information of energy consumption, they can also be exploited to infer sensitive consumer data. Therefore, privacy preservation in SMs is paramount in ensuring the widespread and successful deployment of SGs. In this paper, we present a comprehensive survey of the state-of-the-art SM privacy-preserving techniques published in the literature over the past decade. We categorize these techniques based on the attack types and their objectives. We aim to offer a unique perspective in this survey article through the lens of privacy preservation, cross-cutting the wide range of techniques presented in the literature. We conclude by identifying the challenges and highlighting key future research directions in the field. [ABSTRACT FROM AUTHOR]

Alongside the rapid increase in distributed power generation and load, the demand for highly efficient and reliable power converters is increasing. This has resulted in the rise of grid interfaced renewable energy sources (RES), rapid deployment of battery energy storage systems (BESS) coupled with energy managment systems (EMS), and DC based grid. This paper presents a center-tapped transformer-based single-stage single-phase full-bridge (FB) bidirectional AC-DC converter and its control strategy to improve controllability and reliability in applications such as DC distribution, PV/BESS grid interfacing, vehicle to grid (V2G), and so on. In contrast to conventional galvanically isolated topologies, a single-phase center-tapped transformer is introduced. It links and galvanically isolates the converters and the grid and provides its leakage inductance as the needed inductor required for current control (depending on the design). Furthermore, it reduces the number of conventionally required power conversion stages by employing a wide DC-bus voltage control strategy, resulting in a single converter that undergoes a single power conversion. Additionally, the voltage level can be increased to further enhance the output quality by cascading multiple converters (Multi-Level). The structure, operation, and basic control scheme are discussed in detail. Verification through a 220 V r m s , 1.8 kVA, and 45∼100 V D C simulation and small-scale experimental prototype (60∼100 V D C voltage) for practical validation of the topology is also presented. [ABSTRACT FROM AUTHOR]

Smart metering systems development and implementation in power distribution networks can be seen as an important factor that led to a major technological upgrade and one of the first steps in the transition to smart grids. Besides their main function of power consumption metering, as is demonstrated in this work, the extended implementation of smart metering can be used to support many other important functions in the electricity distribution grid. The present paper proposes a new solution that uses a frequency feature-based method of data time-series provided by the smart metering system to estimate the energy contour at distribution level with the aim of improving the quality of the electricity supply service, of reducing the operational costs and improving the quality of electricity measurement and billing services. The main benefit of this approach is determining future energy demand for optimal energy flow in the utility grid, with the main aims of the best long term energy production and acquisition planning, which lead to lowering energy acquisition costs, optimal capacity planning and real-time adaptation to the unpredicted internal or external electricity distribution branch grid demand changes. Additionally, a contribution to better energy production planning, which is a must for future power networks that benefit from an important renewable energy contribution, is intended. The proposed methodology is validated through a case study based on data supplied by a real power grid from a medium sized populated European region that has both economic usage of electricity—industrial or commercial—and household consumption. The analysis performed in the proposed case study reveals the possibility of accurate energy contour forecasting with an acceptable maximum error. Commonly, an error of 1% was obtained and in the case of the exceptional events considered, a maximum 15% error resulted. [ABSTRACT FROM AUTHOR]

In an era of high penetration of renewable energy, accurate photovoltaic (PV) power forecasting is crucial for balancing and scheduling power systems. However, PV power output has uncertainty since it depends on stochastic weather conditions. In this paper, we propose a novel short-term PV forecasting technique using Delaunay triangulation, of which the vertices are three weather stations that enclose a target PV site. By leveraging a Transformer encoder and gated recurrent unit (GRU), the proposed TransGRU model is robust against weather forecast error as it learns feature representation from weather data. We construct a framework based on Delaunay triangulation and TransGRU and verify that the proposed framework shows a 7–15% improvement compared to other state-of-the-art methods in terms of the normalized mean absolute error. Moreover, we investigate the effect of PV aggregation for virtual power plants where errors can be compensated across PV sites. Our framework demonstrates 41–60% improvement when PV sites are aggregated and achieves as low as 3–4% of forecasting error on average. [ABSTRACT FROM AUTHOR]

The usual operation of a microgrid (MG) may often be challenged by emergencies related to extreme weather conditions and technical issues. As a result, the operator often needs to adapt the MG's management by either: (i) excluding disconnected components, (ii) switching to islanded mode or (iii) performing a black start, which is required in case of a blackout, followed by either direct reconnection to the main grid or islanded operation. The purpose of this paper is to present an optimal Decision Support System (DSS) that assists the MG's operator in all the main possible sorts of emergencies, thus providing an inclusive solution. The objective of the optimizer, developed in Pyomo, is to maximize the autonomy of the MG, prioritizing its renewable production. Therefore, the DSS is in line with the purpose of the ongoing energy transition. Furthermore, it is capable of taking into account multiple sorts of Distributed Energy Resources (DER), including Renewable Energy Sources (RES), Battery Energy Storage Systems (BESS)—which can only be charged with renewable energy—and local, fuel-based generators. The proposed DSS is applied in a number of emergencies considering grid-forming and grid-following mode, in order to highlight its effectiveness and is verified with the use of PowerFactory, DIgSILENT. [ABSTRACT FROM AUTHOR]

Large-scale wind power integration has raised concerns about the reliability and stability of power systems. The rotor circuit of a doubly fed induction generator (DFIG) is highly vulnerable to unexpected voltage dips, which can cause considerable electromotive force in the circuit. Consequently, the DFIG must fulfil the fault-ride through (FRT) criteria to ensure the system's performance and contribute to voltage regulation during severe grid outages. This paper provides a hybrid solution for DFIG wind turbines with FRT capabilities, using both a modified switch-type fault current limiter (MSFTCL) and a direct current (DC) chopper. The proposed system has the merit of keeping the rotor current and the DC-link voltage within the permissible limits, enhancing the FRT capability of generators. Moreover, the boundness of supply voltage into its reference value ensures dynamic stability during symmetric and asymmetric grid failures. Further, electromagnetic torque variations are significantly reduced during fault events. Finally, the performance validation of the proposed scheme is performed in a simulation setup, and the results are compared with the existing sliding mode control (SMC) and proportional-integral (PI) controller-based approaches. The comparison results show that a hybrid strategy with advanced controllers provides superior performance for all critical parameters. [ABSTRACT FROM AUTHOR]

Renewable energy resources have gained considerable attention in recent years due to their efficiency and economic benefits. Their proportion of total energy use continues to grow over time. Photovoltaic (PV) cell and wind energy generation are the least-expensive new energy sources in most countries. Renewable energy technologies significantly contribute to climate mitigation and provide economic benefits. Apart from these advantages, renewable energy sources, particularly solar energy, have drawbacks, for instance restricted energy supply, reliance on weather conditions, and being affected by several kinds of faults, which cause a high power loss. Usually, the local PV plants are small in size, and it is easy to trace any fault and defect; however, there are many PV cells in the grid-connected PV system where it is difficult to find a fault. Keeping in view the aforedescribed facts, this paper presents an intelligent model to detect faults in the PV panels. The proposed model utilizes the Convolutional Neural Network (CNN), which is trained on historic data. The dataset was preprocessed before being fed to the CNN. The dataset contained different parameters, such as current, voltage, temperature, and irradiance, for five different classes. The simulation results showed that the proposed CNN model achieved a training accuracy of 97.64% and a testing accuracy of 95.20%, which are much better than the previous research performed on this dataset. [ABSTRACT FROM AUTHOR]

Concerns over fossil fuels and depletable energy sources have motivated renewable energy sources utilization, such as solar photovoltaic (PV) power. Utilities have started penetrating the existing primary grid with renewable energy sources. However, penetrating the grid with photovoltaic energy sources degrades the stability of the whole system because photovoltaic power depends on solar irradiance, which is highly intermittent. This paper proposes a prediction method for non-stationary solar irradiance. The proposed method uses an adaptive extreme learning machine. The extreme learning machine method uses approximated sigmoid and hyper-tangent functions to ensure faster computational time and more straightforward microcontroller implementation. The proposed method is analyzed using the hourly weather data from a specific site at Najran University. The data are preprocessed, trained, tested, and validated. Several evaluation metrics, such as the root mean square error, mean square error, and mean absolute error, are used to evaluate and compare the proposed method with other recently introduced approaches. The results show that the proposed method can be used to predict solar irradiance with high accuracy, as the mean square error is 0.1727 . The proposed approach is implemented using a solar irradiance sensor made of a PV cell, a temperature sensor, and a low-cost microcontroller. [ABSTRACT FROM AUTHOR]

This paper reviews some of the existing methods for charging electric vehicles, generating renewable energy, and storing it. Plans of practical implementation in the city of Brno are compared with the situation in Glasgow. Moreover, it is essential to pay attention to integrated solutions in order to increase efficiency. Energy harvesting and charging systems are combined with an air quality measurement system and integrated into LED street lights. The collected data are sent to a central server for evaluation. The use of smart solutions is a modern approach to saving energy and reducing CO 2 emissions in many sectors. As an example, the described solutions can be applied dually, in both civilian and military sectors. Considering the potential benefits of easier logistics or quiet operation, the potential military exploitation of technological capabilities is discussed from the perspective of enhancing citizens' security and safety in cities. [ABSTRACT FROM AUTHOR]

With the continuous progress of renewable energy technology and the large-scale construction of microgrids, the architecture of power systems is becoming increasingly complex and huge. In order to achieve efficient and low-delay data processing and meet the needs of smart grid users, emerging smart energy systems are often deployed at the edge of the power grid, and edge computing modules are integrated into the microgrids system, so as to realize the cost-optimal control decision of the microgrids under the condition of load balancing. Therefore, this paper presents a bilevel optimization control model, which is divided into an upper-level optimal control module and a lower-level optimal control module. The purpose of the two-layer optimization modules is to optimize the cost of the power distribution of microgrids. The function of the upper-level optimal control module is to set decision variables for the lower-level module, while the function of the lower-level module is to find the optimal solution by mathematical methods on the basis of the upper-level and then feed back the optimal solution to the upper-layer. The upper-level and lower-level modules affect system decisions together. Finally, the feasibility of the bilevel optimization model is demonstrated by experiments. [ABSTRACT FROM AUTHOR]

In the energy system, various sources are used to fulfill the energy demand of large buildings. The energy management of large-scale buildings is very important. The proposed system comprises solar PVs, energy storage systems, and electric vehicles. Demand response (DR) schemes are considered in various studies, but the analysis of the impact of dynamic DR on operational cost has been ignored. So, in this paper, renewable energy resources and storages are integrated considering the demand response strategies such as real-time pricing (RTP), critical peak pricing (CPP), and time of use (ToU). The proposed system is mapped in a linear model and simulated in MATLAB using linear programming (LP). Different case studies are investigated considering the dynamic demand response schemes. Among different schemes, results based on real-time pricing (58% saving) show more saving as compared to the CPP and ToU. The obtained results reduced the operational cost and greenhouse gas (GHG) emissions, which shows the efficacy of the model. [ABSTRACT FROM AUTHOR]

Autonomous components within electric power systems can be successfully specified by interpreted Petri nets. Such a formal specification makes it possible to check some basic properties of the models, such as determinism or deadlock freedom. In this paper, it is shown how these models can also be formally verified against some behavioral user-defined properties that relate to the safety or liveness of a designed system. The requirements are written as temporal logic formulas. The rule-based logical model is used to support the verification process. An interpreted Petri net is first written as an abstract logical model, and then automatically transformed into a verifiable model that is supplemented by appropriate properties for checking. Formal verification is then performed with the nuXmv model checker. Thanks to this the initial specification of autonomous components can be formally verified and any design errors can be identified at an early stage of system development. An electric energy storage (EES) is presented as an application system for the provision of a system service for stabilizing the power of renewable energy sources (RES) or highly variable loads. The control algorithm of EES in the form of an interpreted Petri net is then written as a rule-based logical model and transformed into a verifiable model, allowing automatic checking of user-defined requirements. [ABSTRACT FROM AUTHOR]

In modern urban energy communities, diverse natured loads (homes, schools, hospitals, malls, etc.) are situated in the same locality and have self-electricity generation/management facilities. The power systems of these individual buildings are called smart microgrids. Usually, their self-electricity generation is based on renewable energy sources, which are uncertain due to their environmental dependency. So, the consistency of self-energy generation throughout the day is not guaranteed; thus, the dependency on the central utility grid is continued. To solve this, researchers have recently started working on interoperable smart microgrids (ISMs) for urban communities. Here, a central monitoring and control station captures the energy generation/demand information of each microgrid and analyzes the availability/requirement, thereby executing the energy transactions among these ISMs. Such local energy exchanges among the ISMs reduce the issues with uncertain renewable energy and the dependency on the utility grid. To establish such useful ISMs, a well-established communication mechanism has to be adopted. In this view, this paper first reviews various state-of-the-art developments related to smart grids and then provides extensive insights into communication standards and technologies, issues/challenges, and future research perspectives for ISM implementation. Finally, a discussion is presented on advanced wireless technology, called LoRa (Long Range), and a modern architecture using the LoRa technology to establish a communication network for ISMs is proposed. [ABSTRACT FROM AUTHOR]

In Smart Grid (SG), Transactive Energy Management (TEM) is one of the most promising approaches to boost consumer participation in energy generation, energy management, and establishing decentralized energy market models using Peer-to-Peer (P2P). In P2P, a prosumer produces electric energy at their place using Renewable Energy Resources (RES) such as solar energy, wind energy, etc. Then, this generated energy is traded with consumers (who need the energy) in a nearby locality. P2P facilitates energy exchange in localized micro-energy markets of the TEM system. Such decentralized P2P energy management could cater to diverse prosumers and utility business models. However, the existing P2P approaches suffer from several issues such as single-point-of-failure, network bandwidth, scalability, trust, and security issues. To handle the aforementioned issues, this paper proposes a Decentralized and Transparent P2P Energy Trading (DT-P2PET) scheme using blockchain. The proposed DT-P2PET scheme aims to reduce the grid's energy generation and management burden while also increasing profit for both consumers and prosumers through a dynamic pricing mechanism. The DT-P2PET scheme uses Ethereum-blockchain-based Smart Contracts (SCs) and InterPlanetary File System (IPFS) for the P2P energy trading. Furthermore, a recommender mechanism is also introduced in this study to increase the number of prosumers. The Ethereum SCs are designed and deployed to perform P2P in real time in the proposed DT-P2PET scheme. The DT-P2PET scheme is evaluated based on the various parameters such as profit generation (for prosumer and consumer both), data storage cost, network bandwidth, and data transfer rate in contrast to the existing approaches. [ABSTRACT FROM AUTHOR]

Distributed Energy Resources (DERs) are growing in importance Power Systems. Battery Electrical Storage Systems (BESS) represent fundamental tools in order to balance the unpredictable power production of some Renewable Energy Sources (RES). Nevertheless, BESS are usually remotely controlled by SCADA systems, so they are prone to cyberattacks. This paper analyzes the vulnerabilities of BESS and proposes an anomaly detection algorithm that, by observing the physical behavior of the system, aims to promptly detect dangerous working conditions by exploiting the capabilities of a particular neural network architecture called the autoencoder. The results show the performance of the proposed approach with respect to the traditional One Class Support Vector Machine algorithm. [ABSTRACT FROM AUTHOR]

Given the recent increase in demand for electricity, it is necessary for renewable energy sources (RESs) to be widely integrated into power networks, with the two most commonly adopted alternatives being solar and wind power. Nonetheless, there is a significant amount of variation in wind speed and solar irradiance, on both a seasonal and a daily basis, an issue that, in turn, causes a large degree of variation in the amount of solar and wind energy produced. Therefore, RES technology integration into electricity networks is challenging. Accurate forecasting of solar irradiance and wind speed is crucial for the efficient operation of renewable energy power plants, guaranteeing the electricity supply at the most competitive price and preserving the dependability and security of electrical networks. In this research, a variety of different models were evaluated to predict medium-term (24 h ahead) wind speed and solar irradiance based on real-time measurement data relevant to the island of Crete, Greece. Illustrating several preprocessing steps and exploring a collection of "classical" and deep learning algorithms, this analysis highlights their conceptual design and rationale as time series predictors. Concluding the analysis, it discusses the importance of the "features" (intended as "time steps"), showing how it is possible to pinpoint the specific time of the day that most influences the forecast. Aside from producing the most accurate model for the case under examination, the necessity of performing extensive model searches in similar studies is highlighted by the current work. [ABSTRACT FROM AUTHOR]

In the contemporary context of power network protection, acknowledging uncertainties in safeguarding recent power networks integrated with distributed generation (DG) is imperative to uphold the dependability, security, and efficiency of the grid amid the escalating integration of renewable energy sources and evolving operational conditions. This study delves into the optimization of relay settings within distribution networks, presenting a novel approach aimed at augmenting coordination while accounting for the dynamic presence of DG resources and the uncertainties inherent in their generation outputs and load consumption—factors previously overlooked in existing research. Departing from conventional methodologies, the study proposes a dual-setting characteristic for directional overcurrent relays (DOCRs). Initially, a meticulous modeling of a power network featuring distributed generation is undertaken, integrating Weibull probability functions for each resource to capture their probabilistic behavior. Subsequently, the second stage employs the fuzzy Monte Carlo method to address generation and consumption uncertainties. The optimization conundrum is addressed using the ant lion optimizer (ALO) algorithm in the MATLAB environment. This thorough analysis was conducted on IEEE 14-bus and IEEE 30-bus power distribution systems, showcasing a notable reduction in the total DOCR operating time compared to conventional characteristics. The proposed characteristic not only achieves resilient coordination across a spectrum of uncertainties in both distributed generation outputs and load consumption, but also strengthens the resilience of distribution networks overall. [ABSTRACT FROM AUTHOR]

This is demonstrated in [[7]] Contributions [[8]] of this Special Issue provide innovative approaches for generalizing sensorless control strategies for different types of DC-DC converters [[8]] and for rectifying AC-DC using DC-DC converters [[9]]. Differential inverters use various modules of DC-DC converters to obtain alternating currents, taking advantage of the DC voltage differences between the modules. Within the same issue, article [[5]] demonstrates that emerging converters, such as quasi-Z inverters, can use a hybrid control strategy to improve their dynamic response against these abrupt current or power changes in the control references. To manage power in these ESSs, either DC-DC converters or AC-DC converters are required. [Extracted from the article]

Nowadays, electric vehicles have gained great popularity due to their performance and efficiency. Investment in the development of this new technology is justified by increased consciousness of the environmental impacts caused by combustion vehicles such as greenhouse gas emissions, which have contributed to global warming as well as the depletion of non-oil renewable energy source. The lithium-ion battery is an appropriate choice for electric vehicles (EVs) due to its promising features of high voltage, high energy density, low self-discharge, and long life cycles. In this context, State of Charge (SoC) is one of the vital parameters of the battery management system (BMS). Nevertheless, because the discharge and charging of battery cells requires complicated chemical operations, it is therefore hard to determine the state of charge of the battery cell. This paper analyses the application of Artificial Neural Networks (ANNs) in the estimation of the SoC of lithium batteries using the NASA's research center dataset. Normally, the learning of these networks is performed by some method based on a gradient, having the mean squared error as a cost function. This paper evaluates the substitution of this traditional function by a measure of similarity of the Information Theory, called the Maximum Correntropy Criterion (MCC). This measure of similarity allows statistical moments of a higher order to be considered during the training process. For this reason, it becomes more appropriate for non-Gaussian error distributions and makes training less sensitive to the presence of outliers. However, this can only be achieved by properly adjusting the width of the Gaussian kernel of the correntropy. The proper tuning of this parameter is done using adaptive strategies and genetic algorithms. The proposed identification model was developed using information for training and validation, using a dataset made available in a online repository maintained by NASA's research center. The obtained results demonstrate that the use of correntropy, as a cost function in the error backpropagation algorithm, makes the identification procedure using ANN networks more robust when compared to the traditional Mean Squared Error. [ABSTRACT FROM AUTHOR]

Cloudy conditions at a local scale pose a significant challenge for forecasting renewable energy generation through photovoltaic panels. Consequently, having real-time knowledge of sky conditions becomes highly valuable. This information could inform decision-making processes in system operations, such as determining whether conditions are favorable for activating a standalone system requiring a minimum level of radiation or whether sky conditions might lead to higher energy consumption than generation during adverse cloudy conditions. This research leveraged convolutional neural networks (CNNs) and transfer learning (TL) classification techniques, testing various architectures from the EfficientNet family and two ResNet models for classifying sky images. Cross-validation methods were applied across different experiments, where the most favorable outcome was achieved with the EfficientNetV2-B1 and EfficientNetV2-B2 models boasting a mean Accuracy of 98.09%. This study underscores the efficacy of the architectures employed for sky image classification, while also highlighting the models yielding the best results. [ABSTRACT FROM AUTHOR]

As modern technologies, particularly home assistant devices and sensors, become more integrated into our daily lives, they are also making their way into the domain of energy management within our homes. Homeowners, now acting as prosumers, have access to detailed information at 15-min or even 5-min intervals, including weather forecasts, outputs from renewable energy source (RES)-based systems, appliance schedules and the current energy balance, which details any deficits or surpluses along with their quantities and the predicted prices on the local energy market (LEM). The goal for these prosumers is to reduce costs while ensuring their home's comfort levels are maintained. However, given the complexity and the rapid decision-making required in managing this information, the need for a supportive system is evident. This is particularly true given the routine nature of these decisions, highlighting the potential for a system that provides personalized recommendations to optimize energy consumption, whether that involves adjusting the load or engaging in transactions with the LEM. In this context, we propose a recommendation system powered by large language models (LLMs), Scikit-llm and zero-shot classifiers, designed to evaluate specific scenarios and offer tailored advice for prosumers based on the available data at any given moment. Two scenarios for a prosumer of 5.9 kW are assessed using candidate labels, such as Decrease, Increase, Sell and Buy. A comparison with a content-based filtering system is provided considering the performance metrics that are relevant for prosumers. [ABSTRACT FROM AUTHOR]

The demand for green hydrogen as an energy carrier is projected to exceed 350 million tons per year by 2050, driven by the need for sustainable distribution and storage of energy generated from sources. Despite its potential, hydrogen production currently faces challenges related to cost efficiency, compliance, monitoring, and safety. This work proposes Hydrogen 4.0, a cyber–physical approach that leverages Industry 4.0 technologies—including smart sensing, analytics, and the Internet of Things (IoT)—to address these issues in hydrogen energy plants. Such an approach has the potential to enhance efficiency, safety, and compliance through real-time data analysis, predictive maintenance, and optimised resource allocation, ultimately facilitating the adoption of renewable green hydrogen. The following sections break down conventional hydrogen plants into functional blocks and discusses how Industry 4.0 technologies can be applied to each segment. The components, benefits, and application scenarios of Hydrogen 4.0 are discussed while how digitalisation technologies can contribute to the successful integration of sustainable energy solutions in the global energy sector is also addressed. [ABSTRACT FROM AUTHOR]

The emergence of the Internet of Things (IoT) has subverted people's lives, causing the rapid development of sensor technologies. However, traditional sensor energy sources, like batteries, suffer from the pollution problem and the limited lifetime for powering widely implemented electronics or sensors. Therefore, it is essential to obtain self-powered sensors integrated with renewable energy harvesters. The triboelectric nanogenerator (TENG), which can convert the surrounding mechanical energy into electrical energy based on the surface triboelectrification effect, was born of this background. This paper systematically introduces the working principle of the TENG-based self-powered sensor, including the triboelectrification effect, Maxwell's displacement current, and quantitative analysis method. Meanwhile, this paper also reviews the recent application of TENG in different fields and summarizes the future development and current problems of TENG. We believe that there will be a rise of TENG-based self-powered sensors in the future. [ABSTRACT FROM AUTHOR]

The use of renewable energies sources is taking great importance due to the high demand for electricity and the decrease in the use of fossil fuels worldwide. In this context, electricity generation through photovoltaic panels is gaining a lot of interest due to the reduction in installation costs and the rapid advance of the development of new technologies. To minimize or reduce the negative impact of partial shading or mismatches of photovoltaic panels, many researchers have proposed four configurations that depend on the power ranges and the application. The microinverter is a promising solution in photovoltaic systems, due to its high efficiency of Maximum Power Point Tracking and high flexibility. However, there are several challenges to improve microinverter's reliability and conversion efficiency that depend on the proper control design and the power converter design. This paper presents a review of different control strategies in microinverters for different applications. The control strategies are described and compared based on stability, dynamic response, topologies, and control objectives. One of the most important results showed that there is little research regarding the stability and robustness analysis of the reviewed control strategies. [ABSTRACT FROM AUTHOR]

The Internet of Things (IoT) has emerged as an important concept, bridging the physical and digital worlds through interconnected devices. Although the idea of interconnected devices predates the term "Internet of Things", which was coined in 1999 by Kevin Ashton, the vision of a seamlessly integrated world of devices has been accelerated by advancements in wireless technologies, cost-effective computing, and the ubiquity of mobile devices. This study aims to provide an in-depth review of existing and emerging IoT simulators focusing on their capabilities and real-world applications, and discuss the current challenges and future trends in the IoT simulation area. Despite substantial research in the IoT simulation domain, many studies have a narrow focus, leaving a gap in comprehensive reviews that consider broader IoT development metrics, such as device mobility, energy models, Software-Defined Networking (SDN), and scalability. Notably, there is a lack of literature examining IoT simulators' capabilities in supporting renewable energy sources and their integration with Vehicular Ad-hoc Network (VANET) simulations. Our review seeks to address this gap, evaluating the ability of IoT simulators to simulate complex, large-scale IoT scenarios and meet specific developmental requirements, as well as examining the current challenges and future trends in the field of IoT simulation. Our systematic analysis has identified several significant gaps in the current literature. A primary concern is the lack of a generic simulator capable of effectively simulating various scenarios across different domains within the IoT environment. As a result, a comprehensive and versatile simulator is required to simulate the diverse scenarios occurring in IoT applications. Additionally, there is a notable gap in simulators that address specific security concerns, particularly battery depletion attacks, which are increasingly relevant in IoT systems. Furthermore, there is a need for further investigation and study regarding the integration of IoT simulators with traffic simulation for VANET environments. In addition, it is noteworthy that renewable energy sources are underrepresented in IoT simulations, despite an increasing global emphasis on environmental sustainability. As a result of these identified gaps, it is imperative to develop more advanced and adaptable IoT simulation tools that are designed to meet the multifaceted challenges and opportunities of the IoT domain. [ABSTRACT FROM AUTHOR]

This study investigates the use of a foldable solar panel system equipped with a dynamic tracking algorithm for agrivoltaics system (AVS) applications. It aims to simultaneously meet the requirements for renewable energy and sustainable agriculture. The design focuses on improving solar energy capture while facilitating crop growth through adjustable shading. The results show that foldable panels, controlled by the tracking algorithm, significantly outperform fixed panels in energy efficiency, achieving up to a 15% gain in power generation and uniform power generation throughout the day. Despite the presence of shadows of adjacent panels in the early morning and late evening, the system's effectiveness in creating microclimates for diverse crops demonstrates its substantial value. The foldable design not only protects crops from adverse climate conditions across different seasons but also generates energy efficiently. This demonstrates a step forward in sustainable land use and food security. [ABSTRACT FROM AUTHOR]

There is a consensus within the scientific community regarding the effects on the environment, health, and climate of the use of renewable energy sources, which is characterized by a rate of harmful polluting emissions that is significantly lower than that typical of fossil fuels. On the other hand, this transition towards the use of more sustainable energy sources will also be characterized by an increasingly widespread electrification rate. In this work, we want to discuss whether electricity distribution and transmission networks and their main components are characterized by emissions that are potentially harmful to the environment and human health during their operational life. We will see that the scientific literature on this issue is rather limited, at least until now. However, conditions are reported in which the network directly causes or at least promotes the emissions of polluting substances into the environment. For the most part, the emissions recorded, rather than their environmental or human health impacts, are studied as part of the implementation of techniques for the early determination of faults in the network. It is probable that with the increasing electrification of energy consumption, the problem reported here will become increasingly relevant. [ABSTRACT FROM AUTHOR]

This paper proposes a single-stage three-phase modular flyback differential inverter (MFBDI) for medium/high power solar PV grid-integrated applications. The proposed inverter structure consists of parallel modules of flyback DC-DC converters based on the required power level. The MFBDI offers many features for renewable energy applications, such as reduced components, single-stage power processing, high-power density, voltage-boosting property, improved footprint, flexibility with modular extension capability, and galvanic isolation. The proposed inverter has been modelled, designed, and scaled up to the required application rating. A new mathematical model of the proposed MFBDI is presented and analyzed with a time-varying duty-cycle, wide-range of frequency variation, and power balancing in order to display its grid current harmonic orders for grid-tied applications. In addition, an LPF-based harmonic compensation strategy is used for second-order harmonic component (SOHC) compensation. With the help of the compensation technique, the grid current THD is reduced from 36% to 4.6% by diminishing the SOHC from 51% to 0.8%. Moreover, the SOHC compensation technique eliminates third-order harmonic components from the DC input current. In addition, a 15% parameters mismatch has been applied between the flyback parallel modules to confirm the modular operation of the proposed MFBDI under modules divergence. In addition, SiC MOSFETs are used for inverter switches implementation, which decrease the inverter switching losses at high-switching frequency. The proposed MFBDI is verified by using three flyback parallel modules/phase using PSIM/Simulink software, with a rating of 5 kW, 200 V, and 50 kHz switching frequency, as well as experimental environments. [ABSTRACT FROM AUTHOR]

The subject of this work is the analysis of methods of detecting soiling of photovoltaic panels. Environmental and weather conditions affect the efficiency of renewable energy sources. Accumulation of soil, dust, and dirt on the surface of the solar panels reduces the power generated by the panels. This paper presents several variants of the algorithm that uses various statistical classifiers to classify photovoltaic panels in terms of soiling. The base material was high-resolution photos and videos of solar panels and sets dedicated to solar farms. The classifiers were tested and analyzed in their effectiveness in detecting soiling. Based on the study results, a group of optimal classifiers was defined, and the classifier selected that gives the best results for a given problem. The results obtained in this study proved experimentally that the proposed solution provides a high rate of correct detections. The proposed innovative method is cheap and straightforward to implement, and allows use in most photovoltaic installations. [ABSTRACT FROM AUTHOR]

Unmanned Aerial Vehicle (UAV)-assisted cellular networks over the millimeter-wave (mmWave) frequency band can meet the requirements of a high data rate and flexible coverage in next-generation communication networks. However, higher propagation loss and the use of a large number of antennas in mmWave networks give rise to high energy consumption and UAVs are constrained by their low-capacity onboard battery. Energy harvesting (EH) is a viable solution to reduce the energy cost of UAV-enabled mmWave networks. However, the random nature of renewable energy makes it challenging to maintain robust connectivity in UAV-assisted terrestrial cellular networks. Energy cooperation allows UAVs to send their excessive energy to other UAVs with reduced energy. In this paper, we propose a power allocation algorithm based on energy harvesting and energy cooperation to maximize the throughput of a UAV-assisted mmWave cellular network. Since there is channel-state uncertainty and the amount of harvested energy can be treated as a stochastic process, we propose an optimal multi-agent deep reinforcement learning algorithm (DRL) named Multi-Agent Deep Deterministic Policy Gradient (MADDPG) to solve the renewable energy resource allocation problem for throughput maximization. The simulation results show that the proposed algorithm outperforms the Random Power (RP), Maximal Power (MP) and value-based Deep Q-Learning (DQL) algorithms in terms of network throughput. [ABSTRACT FROM AUTHOR]

Energy harvesting has an essential role in the development of reliable devices for environmental wireless sensor networks (EWSN) in the Internet of Things (IoT), without considering the need to replace discharged batteries. Thermoelectric energy is a renewable energy source that can be exploited in order to efficiently charge a battery. The paper presents a simulation of an environment monitoring device powered by a thermoelectric generator (TEG) that harvests energy from the temperature difference between air and soil. The simulation represents a mathematical description of an EWSN, which consists of a sensor model powered by a DC/DC boost converter via a TEG and a load, which simulates data transmission, a control algorithm and data collection. The results section provides a detailed description of the harvested energy parameters and properties and their possibilities for use. The harvested energy allows supplying the load with an average power of 129.04 μ W and maximum power of 752.27 μ W. The first part of the results section examines the process of temperature differences and the daily amount of harvested energy. The second part of the results section provides a comprehensive analysis of various settings for the EWSN device's operational period and sleep consumption. The study investigates the device's number of operational cycles, quantity of energy used, discharge time, failures and overheads. [ABSTRACT FROM AUTHOR]

Photovoltaic (PV) energy is a renewable energy resource which is being widely integrated in intelligent power grids, smart grids, and microgrids. To characterize and monitor the behavior of PV modules, current-voltage (I-V) curves are essential. In this regard, Internet of Things (IoT) technologies provide versatile and powerful tools, constituting a modern trend in the design of sensing and data acquisition systems for I-V curve tracing. This paper presents a novel I-V curve tracer based on IoT open-source hardware and software. Namely, a Raspberry Pi microcomputer composes the hardware level, whilst the applied software comprises mariaDB, Python, and Grafana. All the tasks required for curve tracing are automated: load sweep, data acquisition, data storage, communications, and real-time visualization. Modern and legacy communication protocols are handled for seamless data exchange with a programmable logic controller and a programmable load. The development of the system is expounded, and experimental results are reported to prove the suitability and validity of the proposal. In particular, I-V curve tracing of a monocrystalline PV generator under real operating conditions is successfully conducted. [ABSTRACT FROM AUTHOR]

High energy consumption, rising environmental concerns and depleting fossil fuels demand an increase in clean energy production. The enhanced resiliency, efficiency and reliability offered by microgrids with distributed energy resources (DERs) have shown to be a promising alternative to the conventional grid system. Large-sized commercial customers like institutional complexes have put significant efforts to promote sustainability by establishing renewable energy systems at university campuses. This paper proposes the integration of a photovoltaic (PV) system, energy storage system (ESS) and electric vehicles (EV) at a University campus. An optimal energy management system (EMS) is proposed to optimally dispatch the energy from available energy resources. The problem is mapped in a Linear optimization problem and simulations are carried out in MATLAB. Simulation results showed that the proposed EMS ensures the continuous power supply and decreases the energy consumption cost by nearly 45%. The impact of EV as a storage tool is also observed. EVs acting as a source of energy reduced the energy cost by 45.58% and as a load by 19.33%. The impact on the cost for continuous power supply in case of a power outage is also analyzed. [ABSTRACT FROM AUTHOR]

The development of renewable energy sources has grown increasingly as the world shifts toward lowering carbon emissions and supporting sustainability. Solar energy is one of the most promising renewable energy sources, and its harvesting potential has gone beyond typical solar panels to small, portable devices. Also, the trend toward smart buildings is becoming more prevalent at the same time as sensors and small devices are becoming more integrated, and the demand for dependable, sustainable energy sources will increase. Our work aims to tackle the issue of identifying the most suitable protective layer for small optical devices that can efficiently utilize indoor light sources. To conduct our research, we designed and tested a model that allowed us to compare the performance of many small panels made of monocrystalline cells laminated with three different materials: epoxy resin, an ethylene–tetrafluoroethylene copolymer (ETFE), and polyethylene terephthalate (PET), under varying light intensities from LED and CFL sources. The methods employed encompass contact angle measurements of the protective layers, providing insights into their wettability and hydrophobicity, which indicates protective layer performance against humidity. Reflection spectroscopy was used to evaluate the panels' reflectance properties across different wavelengths, which affect the light amount arrived at the solar cell. Furthermore, we characterized the PV panels' electrical behavior by measuring short-circuit current (ISC), open-circuit voltage (VOC), maximum power output (Pmax), fill factor (FF), and load resistance (R). Our findings offer valuable insights into each PV panel's performance and the protective layer material's effect. Panels with ETFE layers exhibited remarkable hydrophobicity with a mean contact angle of 77.7°, indicating resistance against humidity-related effects. Also, panels with ETFE layers consistently outperformed others as they had the highest open circuit voltage (VOC) ranging between 1.63–4.08 V, fill factor (FF) between 35.9–67.3%, and lowest load resistance (R) ranging between 11,268–772 KΩ.cm−2 under diverse light intensities from various light sources, as determined by our results. This makes ETFE panels a promising option for indoor energy harvesting, especially for powering sensors with low power requirements. This information could influence future research in developing energy harvesting solutions, thereby making a valuable contribution to the progress of sustainable energy technology. [ABSTRACT FROM AUTHOR]

Ambient energy-powered sensors are becoming increasingly crucial for the sustainability of the Internet-of-Things (IoT). In particular, batteryless sensors are a cost-effective solution that require no battery maintenance, last longer and have greater weatherproofing properties due to the lack of a battery access panel. In this work, we study adaptive transmission algorithms to improve the performance of batteryless IoT sensors based on the LoRa protocol. First, we characterize the device power consumption during sensor measurement and/or transmission events. Then, we consider different scenarios and dynamically tune the most critical network parameters, such as inter-packet transmission time, data redundancy and packet size, to optimize the operation of the device. We design appropriate capacity-based storage, considering a renewable energy source (e.g., photovoltaic panel), and we analyze the probability of energy failures by exploiting both theoretical models and real energy traces. The results can be used as feedback to re-design the device to have an appropriate amount energy storage and meet certain reliability constraints. Finally, a cost analysis is also provided for the energy characteristics of our system, taking into account the dimensioning of both the capacitor and solar panel. [ABSTRACT FROM AUTHOR]