Search

Daylight penetration significantly affects building thermal-daylighting performance, and serve a dual function of permitting sunlight and creating a pleasant indoor environment. More recent attention has focused on the provision of daylight in the rear part of indoor spaces in designing sustainable buildings. Passive Anidolic Daylighting Systems (ADS) are effective tools for daylight collection and redistribution of sunlight towards the back of the room. As affordable and low-maintenance systems, they can provide indoor daylight and alleviate the problem of daylight over-provision near the window and under-provision in the rear part of the room. Much of the current literature on the ADS pays particular attention to visual comfort and rarely to thermal comfort. Therefore, a reasonable compromise between visual and thermal comfort as well as energy consumption becomes the main issue for energy-optimized aperture design in the tropics and subtropics, in cities such as Sydney, Australia. The objective of the current study was to devise a system that could act as a double-performance of shade and reflective tool. The central aim of this paper is to find the optimum curve that can optimize daylight admission without an expensive active tracking system. A combination of in-detail simulation (considering every possible sky condition throughout a year) and multi-objective optimization (considering indoor visual and thermal comfort as well as the view to the outside), which was validated by field measurement, resulted in the optimum ADS for the local dwellings in Sydney, Australia. An approximate 62% increase in Daylight Factor, 5% decrease in yearly average heating load, 17% savings in annual artificial lighting energy, and 30% decrease in Predicted Percentage Dissatisfied (PPD) were achieved through optimizing the ADS curve. [ABSTRACT FROM AUTHOR]

Rainwater harvesting (RWH) has become a popular water saving and conservation means across the globe. In many cities, a pre-determined rainwater tank size is generally selected without a detail water balance modelling at the location on interest. However, to achieve maximum benefit from a RWH system at a given location, it is desirable to design the system based on the site specific conditions (e.g. local rainfall and loss characteristics) and other relevant design parameters. There have been limited studies on regionalization of RWH system, which can account for the spatial variability in rainfall, loss and water demand characteristics over a given region to provide site-specific design of RWH system. This paper presents a RWH regionalization approach to develop a set of design curves, which assist in the selection of an adequate RWH system at a given location. We use rainfall data from 159 rain gauges across the Greater Sydney region in Australia to develop and test the proposed regionalization approach. It has been found that there is a significant variation in rainfall characteristics across Greater Sydney region and that a common tank size across this region does not present an adequate solution. It has been found that a 5 kL tank can achieve a reliability (i.e. percentage of days the RWH can meet the given demand) of 31–93% for four people depending on the location in the Greater Sydney region and the types of water use. The developed regional design curves could result in increased water savings across Greater Sydney. The proposed regionalization approach can be adapted to other cities across Australia and the world which present a high rainfall gradient. • Water savings by rainwater harvesting at 159 locations in Sydney are evaluated. • Reliability of a rainwater tank is moderately correlated with mean annual rainfall. • A set of design curves is developed for Sydney to enhance rainwater harvesting. [ABSTRACT FROM AUTHOR]