Search

The benefits of using permeable interlocking concrete pavement systems (PICPs) have not translated into widespread adoption in Australia, where their uptake has been slow. This paper communicates the actual performance of PICPs installed in the field by providing evidence of their long-term efficiency. There are currently no Australian standards for design, specification and installation of PICPs. In this study, field measurements were conducted to determine the infiltration capacity of PICPs in Sydney and Wollongong, New South Wales, applying the single ring infiltrometer test (SRIT) and the stormwater infiltration field test (SWIFT). A strong correlation was found between the results of the two tests in a previous study, which was verified in this study. The long-term performance of PICPs is demonstrated by their high infiltration rates (ranging from 125 mm/h to 25,000 mm/h) measured in this study at field sites under a diverse range of conditions. The influences of conditions such as age of installation, slope and tree cover on infiltration rates were explored. [ABSTRACT FROM AUTHOR]

To fight climate change, it is crucial to have a precise knowledge of greenhouse gas (GHG) concentrations in the atmosphere and to monitor sources and sinks of GHGs. On global scales, satellites are an appropriate monitoring tool. For the validation of the satellite measurements and to tie them to the World Meteorological Organization (WMO) trace gas scale, ground-based Fourier transform infrared (FTIR) networks are used, which provide reference data. To ensure the highest-quality validation data, the network must be scaled to the WMO trace gas scale and have a very small site-to-site bias. Currently, the Total Carbon Column Observing Network (TCCON) is the de facto standard FTIR network for providing reference data. Ensuring a small site-to-site bias is a major challenge for the TCCON. In this work, we describe the development and application of a new method to evaluate the site-to-site bias by using a remotely controlled portable FTIR spectrometer as a travel standard (TS) for evaluating the consistency of columnar GHG measurements performed at different TCCON stations, and we describe campaign results for the TCCON sites in Tsukuba (Japan), East Trout Lake (Canada) and Wollongong (Australia). The TS is based on a characterized portable EM27/SUN FTIR spectrometer equipped with an accurate pressure sensor which is operated in an automated enclosure. The EM27/SUN is the standard instrument of the Collaborative Carbon Column Observing Network (COCCON). The COCCON is designed such that all spectrometers are referenced to a common reference unit located in Karlsruhe, Germany. To evaluate the long-term stability of the TS instrument, it is placed side-by-side with the TCCON instrument in Karlsruhe (KA) and the COCCON reference unit (the EM27/SUN spectrometer SN37, which is operated permanently next to the TCCON-KA site) between deployments to collect comparing measurements. At each of the visited TCCON sites, the TCCON spectrometers collected low-resolution (LR) (0.5 cm-1) and high-resolution (HR) (0.02 cm-1) measurements in an alternating manner. Based on the TS as a portable standard, the measurements are compared to the Karlsruhe site as a common reference. For Tsukuba and Wollongong, the agreement with the reference in Karlsruhe found for XCO2 is on the 0.1 % level for both the LR and HR measurements. For XCH4 , the agreement is at the 0.2 % level, with the low-resolution measurements showing a low bias at both sites and for both gases. For XCO , the deviations are up to 7 %. The reason for this is likely to be a known issue with the CO a priori profiles used by the TCCON over source regions. In East Trout Lake (ETL), the TCCON spectrometer broke down while the TS was en route to the station. Hence, no side-by-side comparison was possible there. An important auxiliary value for FTIR retrievals is the surface pressure. Using the pressure sensor in the TS, the surface pressure measurements at each site are also compared. The surface pressure analysis reveals excellent agreement (0.027, 0.135 and 0.094 hPa) for the Tsukuba, ETL and Wollongong sites. [ABSTRACT FROM AUTHOR]

The satellite-based remote-sensing detection of CO2 can provide long-term and continuous observations at the global scale, and is the primary observational approach to monitoring CO2 changes. Surface albedo and aerosol are two significant challenges for retrieving CO2 concentrations from near-infrared remote-sensing data. This research addressed the dependence of radiance sensitivities on CO2 concentration, aerosol, surface albedo, and water vapor. The band ratio method was used to retrieve CO2 with band selection of the high- and low-sensitivity channels to restrain the influence of surface albedo and aerosol. Results showed that the band ratio method had better efficiency at reducing the impact of aerosol and surface albedo than that of the optical estimation method. The retrieval error of aerosol was reduced by 2.5% overall. We validated the band ratio method retrieval results with two TCCON sites and the GOSAT L3 product. Pearson's correlation coefficient, mean bias, mean absolute bias, and root mean squared error of the monthly retrieval data of the band ratio method showed high agreement between the TCCON in Park Falls and Wollongong. These results indicate that the band ratio method based on normalized sensitivity can effectively reduce the influence of surface albedo and aerosol. [ABSTRACT FROM AUTHOR]