Search

There is a long history of coastal erosion caused by frequent storm surges in the coastal regions of Australia, which imposes great threats to communities and infrastructures alongside the beach. Old Bar Beach, New South Wales, Australia, is one such hotspot famous for its extreme coastal erosion. To apply remedial measures such as beach nourishment effectively and economically, estimating/reconstructing the subsurface hydrogeology over the coastal areas is essential. A geophysical tool such as a ground-penetrating radar (GPR) which works on the principle of reflecting electromagnetic (EM) waves, can be conveniently deployed to delineate the soil and rock profiling, water-table depth, bedrock depth, and the subsurface structural features. Here, DeepLabv3+ architecture based newly developed deep convolutional neural networks (DCNNs) were used to establish an inherent non-linear relationship between the GPR data and the EM wave velocity. The presented DCNNs have a lesser number of layers, a lesser number of trainable (learnable) parameters, a high convergence rate and, at the same time, achieve prediction accuracy comparable to that of well-established DeepLabv3+ networks, having high trainable parameters and a relatively low convergence rate. Here, firstly the DCNNs were trained and validated on small 1D datasets. Each dataset contains a 1D GPR trace and a corresponding EM velocity model. The DCNNs turned out to be quite promising in the 1D case, with training, validation, and testing accuracy of approximately 95%, 94%, and 95%, respectively. Secondly, 1D trained weights were applied to 2D synthetic GPR data for EM velocity prediction, and the accuracy of prediction achieved was approximately 95%. Seeing the excellent performance of the DCNNs in the 2D prediction case using 1D trained weights, a large amount of 1D synthetic datasets (approximately 1.2 million) were generated and gaussian noise was added to it to replicate the real field scenario. Thirdly, topographically corrected GPR data acquired over the Old Bar Beach were inverted using the DCNNs trained on 1.2 million 1D synthetic datasets to obtain the subsurface high-resolution, high-precision EM velocity, and ε r distribution information to understand the hydrogeology over the beach. The findings presented in this paper agree well with the previous hydrogeological studies carried out using GPR. Our findings show that DCNNs, along with GPR, can be successfully used in coastal environments for the quick and accurate hydrogeological investigation required for the implementation of coastal erosion mitigation methods such as beach nourishment. [ABSTRACT FROM AUTHOR]

Over the past years, bridge inspection practices and condition assessments were predicated upon long-established manual and paper-based data collection methods which were generally unsafe, time-consuming, imprecise, and labor-intensive, influenced by the experience of the trained inspectors involved. In recent years, the ability to turn an actual civil infrastructure asset into a detailed and precise digital model using state-of-the-art emerging technologies such as laser scanners has become in demand among structural engineers and managers, especially bridge asset managers. Although advanced remote technologies such as Terrestrial Laser Scanning (TLS) are recently established to overcome these challenges, the research on this subject is still lacking a comprehensive methodology for a reliable TLS-based bridge inspection and a well-detailed Bridge Information Model (BrIM) development. In this regard, the application of BrIM as a shared platform including a geometrical 3D CAD model connected to non-geometrical data can benefit asset managers, and significantly improve bridge management systems. Therefore, this research aims not only to provide a practical methodology for TLS-derived BrIM but also to serve a novel sliced-based approach for bridge geometric Computer-Aided Design (CAD) model extraction. This methodology was further verified and demonstrated via a case study on a cable-stayed bridge called Werrington Bridge, located in New South Wales (NSW), Australia. In this case, the process of extracting a precise 3D CAD model from TLS data using the sliced-based method and a workflow to connect non-geometrical information and develop a BrIM are elaborated. The findings of this research confirm the reliability of using TLS and the sliced-based method, as approaches with millimeter-level geometric accuracy, for bridge inspection subjected to precise 3D model extraction, as well as bridge asset management and BrIM development. [ABSTRACT FROM AUTHOR]

Accurate measurements of the structural characteristics of trees such as height, diameter, sweep and taper are an important part of forest inventories in managed forests and commercial plantations. Both terrestrial and aerial LiDAR are currently employed to produce pointcloud data from which inventory metrics can be determined. Terrestrial/ground-based scanning typically provides pointclouds resolutions of many thousands of points per m 2 from which tree stems can be observed and inventory measurements made directly, whereas typical resolutions from aerial scanning (tens of points per m 2 ) require inventory metrics to be regressed from LiDAR variables using inventory reference data collected from the ground. Recent developments in miniaturised LiDAR sensors are enabling aerial capture of pointclouds from low-flying aircraft at high-resolutions (hundreds of points per m 2 ) from which tree stem information starts to become directly visible, enabling the possibility for plot-scale inventories that do not require access to the ground. In this paper, we develop new approaches to automated tree detection, segmentation and stem reconstruction using algorithms based on deep supervised machine learning which are designed for use with aerially acquired high-resolution LiDAR pointclouds. Our approach is able to isolate individual trees, determine tree stem points and further build a segmented model of the main tree stem that encompasses tree height, diameter, taper, and sweep. Through the use of deep learning models, our approach is able to adapt to variations in pointcloud densities and partial occlusions that are particularly prevalent when data is captured from the air. We present results of our algorithms using high-resolution LiDAR pointclouds captured from a helicopter over two Radiata pine forests in NSW, Australia. [ABSTRACT FROM AUTHOR]