Search

Prospective authors are requested to submit new, unpublished manuscripts for inclusion in the upcoming event described in this call for papers. [ABSTRACT FROM AUTHOR]

Questions are used to obtain information, stimulate thinking, and redirect reasoning. Academics in higher education use questions on a daily basis to stimulate thinking and reasoning in students. Final examination papers are used by academics to assess the retention and application skills of students. The assumption, however, exists that questions relating to application skills at universities of technology should start to dominate the higher academic levels in education, with a subsequent drop in questions regarding retention skills. These questions may be categorized as either higher order or lower order questions. This article attempts to distinguish between these two types of questions in light of Bloom's taxonomy, with similar concepts such as deep and surface learning being examined. The literature review is applied to an electrical engineering module titled Electronics, which serves as the case study. The results of this study indicate that a high percentage of the final examination papers dealt with the objective "Application," where students had to make use of numerous mathematical equations to solve various unknowns. The results also indicated that academics in electronics are using more lower order than higher order questions in their final examination papers. A balance is suggested between these two types of questions for various academic levels at universities of technology. [ABSTRACT FROM AUTHOR]

Examines the design of a multiinput multioutput digital-linear-quadratic-regulator control system for paper machine headbox. Key step in paper making process; Factors affecting the success of the process operation; Different control schemes for air-cushioned headbox control; Role of computer-aided-design tools.

Presents guidelines on how to write a good technical paper and make effective presentations. Structure of a technical paper; Common errors committed; Importance of maintaining eye contact with the audience; Making sure that the visual aids are readable; Tips on making a thesis defense.

Several tools are marketed to the educational community for plagiarism detection and prevention. This article briefly contrasts the performance of two leading tools, TurnItIn and MyDropBox, in detecting submissions that were obviously plagiarized from articles published in IEEE journals. Both tools performed poorly because they do not compare submitted writings to publications in the IEEE database. Moreover, these tools do not cover the Association for Computing Machinery (ACM) database or several others important for scholarly work in software engineering. Reports from these tools suggesting that a submission has "passed" can encourage false confidence in the integrity of a submitted writing. Additionally, students can submit drafts to determine the extent to which these tools detect plagiarism in their work. Because the tool samples the engineering professional literature narrowly, the student who chooses to plagiarize can use this tool to determine what plagiarism will be invisible to the faculty member. An appearance of successful plagiarism prevention may in fact reflect better training of students to avoid plagiarism detection. [ABSTRACT FROM AUTHOR]

Prospective authors are requested to submit new, unpublished manuscripts for inclusion in the upcoming event described in this call for papers. [ABSTRACT FROM PUBLISHER]

Contribution: This article features a systematic literature review with the objective of presenting a study that reflects the current scenario of research on the cognitive load theory (CLT) in the domain of teaching and learning computer programming. Background: Computer programming is a highly cognitive skill, requiring mastering multiple competencies, and recognized as being difficult to learn, for this reason, the cognitive load (CL) in the learner’s working memory emerged as an influential concept, making CLT one of the most common theories in computing education research. Research Questions: What are the approaches that relate CLT to teaching and learning computer programming? What CLT-related concepts are covered? What evidence is reported with respect to this context? Methodology: Following a formal protocol, a survey was performed for papers linking CLT to teaching and learning programming published between 2010 and 2020. The selection of papers was based on a set of criteria established to drive the selection process, including alignment with the research questions and paper quality assessment. Findings: The approaches applied in the papers are based on measuring the CL; through instructional design based on the development or use of resources or tools, a range of different pedagogy strategies and the CLT concepts. With respect to the concepts, the subjective measurement technique and worked example effect are the most commonly deployed. As far as the evidence reported, the better part is related to the worked example effect and measuring CLs. [ABSTRACT FROM AUTHOR]

Contributions: The underrepresentation of women in computer science (CS) majors has long been a focus of attention in many academic documents, the majority of them from the United States and Europe. There is, however, a lack of information about educational interventions (EIs) for women in computing in Latin America. The contribution of this article is to cover this gap and describe what researchers in Latin American countries have been publishing about the recruitment and retention of women in the CS field. Background: Many EIs targeting female students at different educational levels—K-12, undergraduate, and graduate—have been undertaken to increase the participation of women in computing in Latin America. However, descriptions of these activities rarely are included in international academic databases. Research Questions: This literature mapping addresses two main research questions (RQ) about the topic of women in computing in academic publications in Latin American countries: RQ1) what are the characteristics of the publications about women in computing in Latin America? and RQ2) what are the published interventions to recruit and retain women in computing in Latin America? To answer RQ1, six subquestions were created covering year, language, country of origin, document type, and professional track. Furthermore, for RQ2, two subquestions were created involving educational level and the use of software development with a female theme. Methodology: This investigation used the systematic literature mapping process. To achieve a broad coverage of papers, the following sources were included: Scopus, Web of Science, Google Scholar, EBSCO, the proceedings of the Latin American Women in Computing Conference (LAWCC), and those of the Women in Technology (WIT) workshop colocated with the annual conference of the Brazilian Computer Society (SBC). The included papers were published in the last decade (2010–2020) and written in English, Portuguese, or Spanish. Findings: The literature mapping encompasses 197 academic documents, 48.2% of which were written in Portuguese, 28.7% in English, and 23.1% in Spanish. The papers originated from 15 of the 20 Latin American countries. Brazil and Costa Rica have the highest number of publications overall. The documents describe initiatives to increase the participation of women in computing majors that cover the entire educational spectrum, from K-12 to graduate programs, but papers targeting populations in higher education have started to appear recently. [ABSTRACT FROM AUTHOR]

Contribution: Prior studies on goal congruity show that students are more motivated to pursue careers that allow them to work with and help others and give back to their community (i.e., careers that afford prosocial value). This paper discovers this same pattern in electrical engineering (EE) and discovers that prosocial affordance beliefs are significantly associated with intensions to persist, while agency beliefs are not. Background: Goal congruity theory finds that people are more motivated to pursue a career if it aligns with values they endorse. This theory can shed light on why some students do not persist in EE because of the stereotype that the profession does not allow working with and helping others. Research Questions: This paper seeks to answer whether EE students perceive the profession as affording prosocial value, and to test associations between prosocial perceptions and motivation to persist in the field. Methodology: The first study in this paper was conducted on students in an introductory EE course ($n\,\,= 79$) that measured affordance beliefs about the EE profession and tested associations with intensions to persist. The second study compared affordance beliefs and trait endorsements held by students in the introductory level course with those in an advanced EE courses ($n\,\,=51$). Findings: Mediation analysis revealed that the more novice students believe that EE allows them to fulfill prosocial goals, the greater their persistence intentions (95% CI: 0.01 to 0.34). This analysis also showed that agency beliefs were not strongly associated with persistence intensions. [ABSTRACT FROM AUTHOR]

Contribution: This paper introduces the real-world limitations and non-technical aspects of power electronics (PEs) projects to students through innovative tutorial activities. Background: Many electrical engineering curricula offer a PE courses (PECs) for third- or fourth-year undergraduate students. Prior research on PEs education mainly focused on improving students’ experimental skills through developing practical experiments, laboratory activities, and problem/project-based learning. An instructional approach that instead employs real-world knowledge and skills is worth evaluating. Intended Outcomes: Students should be able to consider real-world technical and non-technical limitations when applying theory to design PE circuits and converters, and be able to select and carry out appropriate tests to troubleshoot circuits. Application Design: Prior research on engineering education emphasized the importance of introducing real-world limitations to the students as part of their curriculum. This paper suggests that the tutorial activities presented in a PEC can help students acquire skills in designing and troubleshooting a circuit or system according to desired technical aspects, real-world limitations, and available data. Findings: Evidence of the validity of this approach in a PEC at two Australian universities, over four academic years, is provided. Students receiving the new tutorial activities had percentage scores some 10–15 points higher than those who had traditional tutorials. Another evaluation reveals the students’ vibrant participation in the activities during the new tutorial sessions. [ABSTRACT FROM AUTHOR]

Contribution: This paper presents a model for educational robotics tools and a corresponding set of heuristics for their development and evaluation specifically adapted to the needs and expectations in formal education settings. Background: The increased use of educational robots in classrooms, and the steadily growing number of alternatives from which to choose, bring the requirement for appropriate methods to develop and evaluate these tools. Yet the current body of literature does not provide comprehensive frameworks that allow this question to be adequately addressed. Although previous research has studied the use of educational robotics in classrooms, there is still a lack of methods to support their development and evaluation. Intended Outcomes: An evaluation framework to support researchers, engineers, educators, and decision makers in taking informed decisions about educational robotics systems. Application Design: This paper proposes to consider activities involving educational robotics tools as a kind of “educational augmented tabletop game.” Within this framework, a set of fourteen heuristics was devised, based on literature on games and learning tools. The validity of these heuristics was examined with a heterogenous group of twelve school teachers, who tested five different educational robotics systems. Findings: The participating teachers had a high level of approval for the heuristics devised. A heuristic evaluation based on the framework proposed here appeared to more appropriately reflecting the teachers’ needs than did conventional methods, namely the isolated comparison of system characteristics. [ABSTRACT FROM AUTHOR]

Contribution: This paper explores the factors contributing to the development of engineering identity in Latinx students at two institutions. A better understanding of these factors will support the development of more inclusive engineering education environments and experiences. Background: Persistence of Latinx engineering students is of particular interest due to their underrepresentation in the field. Identity is a lens for understanding student persistence, but Latinx students are underrepresented in prior engineering identity studies. This paper seeks to identify the unique factors, academic and professional, that contribute to engineering identity development, and potential means for supporting the persistence of Latinx engineers. Research Questions: 1) What academic and professional affect factors predict engineering identity development of Latinx students? and 2) What role does the institution play in Latinx students’ engineering identity development? Methodology: A mixed-methods approach was used to measure engineering identity based on a framework incorporating both academic and professional affect elements. Regression analyses were conducted on 892 responses to an online survey from Latinx engineering students, with additional insight from interviews with ten Latinx engineering students. Findings: Six of the nine factors analyzed (performance/competence, interest, recognition, analysis, framing and solving problems, and tinkering) were significant predictors of Latinx students’ engineering identity, as were institution, gender, and having a parent with an engineering degree. Engineering identity was higher for Latinx students at the Hispanic Serving Institution, but none of the interaction terms were significant, so the relationship between these factors and engineering identity is similar at each institution. [ABSTRACT FROM AUTHOR]

Contribution: This paper qualitative research delineates the thinking and behavioral patterns that reflect students’ advanced level of epistemological thinking in project-based learning (PBL) activities and the associated impact factors. Background: PBL has been widely adopted in engineering education for its effectiveness in improving students’ problem-solving abilities, collaboration skills, and academic achievement. The four stages of Perry’s theory—Dualism, Multiplicity, Relativism, and Commitment (within Relativism)—depict students’ epistemological development from dualistic to contextual relativistic thinking. Prior research suggested that participation in PBL could benefit students’ development to relativistic thinking—the most revolutionary change in Perry’s model. Nevertheless, how epistemological thinking was exhibited in the context of PBL, and the relationship between students’ epistemological thinking and PBL learning activities both remain unclear. Research Questions: 1) What are demonstrations of students’ relativistic thinking in PBL activities? and 2) What are the factors in regard to students’ relativistic thinking in PBL activities? Methodology: Built upon quantitative results obtained using a modified Zhang’s cognitive development inventory (ZCDI) developed in the context of Perry’s theory, this paper explored demonstrations of students’ relativistic thinking in PBL in a qualitative manner, and analyzed the associated factors based upon one-on-one interviews with 17 engineering students. Findings: In PBL activities, students’ epistemological thinking is reflected in their solving problems within constraints, conducting feasibility analyses, exhibiting commercial awareness, having their thinking broadened, and more. Their epistemological thinking can be impacted by factors, such as guidance from professors, collaborations with peers, communications with other stakeholders, and complexity level of projects. [ABSTRACT FROM AUTHOR]

Contribution: This paper found that design experiences can foster engineering identity and belongingness for early career electrical and computer engineering students. Students had different interpretations of what it meant to be an engineer (identity) and their belongingness in engineering. This paper provides novel insights into how students may be developing identities and belongingness in engineering, both critical for student retention and success. Background: Design experiences are crucial for engineering students, both for developing academic competencies and allowing students to see how they can become engineers. Existing literature has mixed results with respect to the influence of team-based design experiences on engineering identity and belongingness. Research Questions: 1) How do design experiences influence early career electrical and computer engineering students’ identification and belongingness in engineering? and 2) How do these students describe what it means to identify as an engineer and belong in engineering? Methodology: The beliefs of electrical and computer engineering students were examined using mixed methods to understand the intersection of design experiences, engineering identity, and belongingness. Findings: Students interpreted their engineering identity and belongingness differently, particularly, with respect to how design experiences can shape these attitudes. Whereas students interpreted engineering identity through their performance and interest in authentic engineering tasks, they interpreted belongingness as a means of comparing themselves to their peers. The findings have implications for engineering education researchers, and design instructors, to foster ways of being and belonging in engineering. [ABSTRACT FROM AUTHOR]

Contribution: This brief comment highlights some crucial assumptions behind the “law of the junction” that are overlooked by the above paper and argues that the proposed derivation is not actually a “new” derivation at all. Background: The “law of the junction” is one of the most significant and useful results within the field of solid-state devices. The above paper is likely to confuse readers, particularly those who are undergraduate electrical engineering students studying semiconductor device physics for the first time. This is especially so because of the abstract nature of the underlying quantum mechanics framework and solid-state physics models (subjects which the typical student at that level lacks a substantial background in) as well as the plethora of tedious equations in the curriculum. Research Questions: What core physical concepts are essential to a fundamental yet intuitive understanding of the law of the junction? Methodology: Several key features of how semiconductor junctions behave under bias are explained. References to well-known textbooks are provided where appropriate. Findings: The above paper’s primary mistake is its assertion that its derivation does not rely on the assumption of thermal equilibrium. However, the law of the junction is equivalent to a calculation of depletion-edge minority carrier concentrations using Maxwell–Boltzmann statistics—a distribution which only holds under thermal equilibrium conditions. More rigorously, in a nondegenerate semiconductor, Fermi–Dirac statistics (which governs electrons) reduces to Boltzmann statistics only when the electrochemical potential is spatially uniform, a condition equivalent to having no net flow of thermal energy—the very definition of thermal equilibrium. [ABSTRACT FROM AUTHOR]

This article is an extension of a work in progress paper originally presented at the conference FiE 2020, Frontiers in Education by (Schirichian et al., 2020), as a result of Schirichian’s master’s in science dissertation. It studies the relations between academic performance, protection factors, life at university, and personal characteristics to understand how they influence students’ academic success in undergraduate engineering programs in Brazil. In this challenging environment, several students overcome these issues and graduate, which indicates that some protection structures allow students to face challenging situations and be successful in their studies. Current research studied the relationships between academic performance, self-efficacy, causal attributions, personal characteristics, and life at university, with a group of 30 students. Models were studied by combining the different variables and aspects evaluated in the research, and the findings show relationship between academic performance and: 1) self-efficacy, causal attributions, and personal characteristics (such as leisure activities, living with their parents, or college accommodations) and those who attended private schools during basic education; 2 protection factors self-efficacy and causal attributions with advancing in the program and the time of enrolment in the university; and 3) the dimensions initiation and persistence, success/internality and failure/internality, indicating that those who perceive themselves as playing a major role in their academic journey tend to have better outcomes. Further results show the influence of social inequalities, particularly for those students who declared themselves brown and who conducted their basic education in public schools (which are generally of lower quality than private ones in Brazil). [ABSTRACT FROM AUTHOR]