Search

Ecuador is a country with several climate zones. However, their behaviour is similar throughout the year, with no peaks of extreme temperatures in the various seasons. This paper is a first approach to study the adaptive comfort behaviour in several areas and populations of the country. Considering the ASHRAE 55-2020 model, energy simulation programmes are applied not just to the current climate scenario but also to the climate change scenarios of 2050 and 2100. The results of locations are analysed and compared to determine their performance. Thanks to their climate characteristics, adaptive comfort models could be applied as a passive strategy, using natural ventilation for building indoor comfort improvement, particularly social dwellings. According to previous studies, some prototypes have not considered the climate determinants in each region. Given the geographic situation of the study areas, the adaptive comfort model could be applied in all cases. Percentages of application of natural ventilation and heating and cooling degree hours have similar behaviours according to the climatic region, with a variation greater than 30% among them. [ABSTRACT FROM AUTHOR]

Increasingly people, especially those residing in urban areas with the urban heat island effect, are getting exposed to extreme heat due to ongoing global warming. A number of methods have been developed, so far, to assess urban heat vulnerability in different locations across the world concentrating on diverse aspects of these methods. While there is growing literature, thorough review studies that compare, contrast, and help understand the prospects and constraints of urban heat vulnerability assessment methods are scarce. This paper aims to bridge this gap in the literature. A systematic literature review with the preferred reporting items for systematic reviews and meta-analyses (PRISMA) approach is utilized as the methodological approach. PRISMA is an evidence-based minimum set of items for reporting in systematic reviews and meta-analyses. The results are analyzed in three aspects—i.e., indicators and data, modelling approaches, and validation approaches. The main findings disclose that: (a) Three types of indicators are commonly used—i.e., demographic properties and socioeconomic status, health conditions and medical resources, and natural and built environmental factors; (b) Heat vulnerability indexing models, equal weighting method, and principal component analysis are commonly used in modelling and weighting approaches; (c) Statistical regressions and correlation coefficients between heat vulnerability results and adverse health outcomes are commonly used in validation approaches, but the performance varies across studies. This study informs urban policy and generates directions for prospective research and more accurate vulnerability assessment method development. [ABSTRACT FROM AUTHOR]

To avoid the potential adverse impacts of climate change from global warming, it is suggested that the target of net zero emissions should be reached by this mid-century. Thailand is aiming to achieve carbon neutrality by 2050. Since electricity generation is one of the largest producers of carbon dioxide emission, the associated emissions must be greatly reduced to achieve the targets mentioned above. Thus, new generation expansion plans must be well developed. This paper discusses the development of generation expansion plans considering Thailand's latest policies along with enhancement of the existing multi-period linear programming model, allowing new electricity generation technologies having low emissions, e.g., solar PV with battery and hydrogen blending in natural gas, to be integrated into generation expansion planning. Then, four generation expansion plans with different levels of hydrogen blending in natural gas are proposed and discussed. It is found that Thailand can achieve carbon neutrality by 2050 by promoting more use of renewable energy altogether with trade-off between land for solar PV installation and amount of hydrogen blended in natural gas. The lesson learned from this study provides crucial information about possible pathways to achieve carbon neutrality in the electricity sector for policy makers in other countries. [ABSTRACT FROM AUTHOR]

For some time, there has been a slow but gradual rise in the average temperature of the entire globe, a "global warming", in fact, the result of human and natural processes that have been producing this phenomenon for decades. Since they are not directly perceived by individuals, these processes and their effects have been ignored for a long time, or at least not considered to be immediately harmful and dangerous. Global warming does not depend so much on solar radiation as it does on the greenhouse effect deriving from the continuous emission, by human activities and natural events, of greenhouse gases that accumulate in the atmosphere and form a barrier to the dispersion of heat produced by solar radiation. A good number of models exists to explain how global warming is produced, which are technical in nature and consider the production of greenhouse gases as the most important cause; however, they do not always analyze and justify the reasons for such emissions. Following the logic, language and methods of Senge's systems thinking, the paper aims to present a general model, the GEAM—qualitative in nature, but rational and coherent—for highlighting the interacting factors that give rise to and maintain global warming. This model constitutes a reference framework to identify possible "strategic areas" within which to identify man-made "artificial" and "natural" factors that can control the phenomenon and to order the countless ideas and interventions that different nations carry out individually to control global warming. The model presented is qualitative in nature and does not allow immediate calculations or forecasts to be performed. However, it could guide in-depth scientific research in generating accurate forecasts and simulation using the tools of systems dynamics. In conclusion, understanding how global warming is created and if and how it could be controlled is the aim of this work. Finally, I want to note that the purpose of this work is not to analyze the technical aspects of the phenomenon of global warming, or to deepen the measures and actions to contrast it, but to provide a "general model of description and understanding" of the phenomenon using logic and language of the Systems Thinking Approach (according to Peter's Senge and Piero Mella), with the aim of highlighting three fundamental strategic areas for countering the phenomenon and four uncontrollable phenomena, triggered by global warming itself, which can make strategic control difficult. Furthermore, I highlight the role played by the world population, understood both quantitatively as a number and qualitatively as a level of economic development, in the production of global warming. Lastly, I observe how the different strategic actions that nations can, indeed must, implement to stem global warming are systematically interconnected and interacting; however, these interactions can produce unknown effects and consequences that must be carefully researched and evaluated—encouraged, if positive, reduced or eliminated if negative. [ABSTRACT FROM AUTHOR]

Sustainable energy development (SED) is a crucial component of the Sustainable Development Goals (SDG), aiming to maintain economic and social progress while protecting the environment and mitigating climate change's effects. SED serves as a transition paradigm for sustainable development, providing a blueprint for energy peace and prosperity for people and all uses. This article presents the history of SED and then uses a critical discourse approach to summarize existing review studies in SED. Ten interlinked themes of SED are identified, with two of them considered to be among the least studied in existing SED reviews and in the current global discussion around climate change. This study explores these two themes, which include energy financing and the need for 100% renewable energy (RE), a sub-theme of decarbonization strategy working towards the 1.5–2.0 °C scenario. The study suggests that the current G20 countries' contributions, if maintained continuously per annum, in addition to 80% more funding from private investment compared to the amount in the 1.5 °C scenario financial requirements for clean energy, are sufficient to limit global warming. In addition to the present drive for 100% RE, the article also discusses emerging issues, such as energy storage options with an indication of hydrogen as the most promising, other energy-related development agendas, and the need for regional security stability to prevent energy wars. Selected SED decarbonization strategies are presented across the power, transport, building, and industrial sectors. The study concludes with progress and directions for future research, mainly the need for re-defining nationally determined contribution (NDC) through an emissions budgeting and centralized global or regional emissions stock-taking strategy working towards the 1.5 °C scenario. [ABSTRACT FROM AUTHOR]

Nowadays, the world is encountering multiple challenges of energy security, economic recovery, and the effect of global warming. Investing in new fossil fuels only locks in uneconomic practices, sustains existing risks and increases the threats of climate change. In contrast, renewable energies, such as photovoltaic energy, constitute one of the most promising technologies in combating global increase in temperatures. Given its simplicity and low maintenance costs, photovoltaic energy is the most effective alternative to address the issues above. However, the standard test conditions (STCs) of PV modules are, in most cases, different from the real working conditions of a solar module. For instance, high levels of incident irradiation in an arid climate may cause the temperature of a module to rise by many degrees above the STC temperature of 25 °C, lowering the module's performance. To effectively simulate and control PV systems for a given location, it has become paramount to develop a robust and accurate model that considers how PV modules behave. This study seeks to introduce an emerging metaheuristic optimization algorithm to estimate the unknown parameters of PV modules. The strategies deployed by flying foxes in the event of high temperatures have given birth to the development of a new metaheuristic algorithm called FFO. Contrary to previous methods, this new modeling procedure makes it possible to calculate all the parameters, regardless of temperature or irradiance. Four PV modules, having different technologies, were tested to evaluate the accuracy of the algorithm in question. The effectiveness of FFO is then contrasted with other well-known metaheuristics where single and double diode models are deployed. The results show that the FFO optimizer represents a substantial and compelling substitute for PV module extraction methods. [ABSTRACT FROM AUTHOR]

Due to the global warming and resulting problems, attention has been paid to greenhouse gases released into the atmosphere since the 1980s and 1990s. For this reason, the Montreal Protocol and the Kyoto Protocol have tightened regulations on the use of gaseous refrigerants in both HVAC systems and industrial refrigeration. Gradually, new generations of gaseous refrigerants, that theoretically have much less negative environmental impact than their predecessors, are introduced into the market. The key parameter describing environmental impact is the GWP index, which is most often defined on a time horizon of 100 years. The long-term use of new generations of gaseous refrigerants in HVAC systems reduces CO2 emissions into the atmosphere; however, given that new generation gases often have a short lifetime, it seems that the adopted assessment may not be applicable. The aim of the article was to show how emissions of CO2 equivalent to the atmosphere differs in the short and long time horizon. The article presents the results of calculations of equivalent CO2 emissions to the atmosphere caused by the operation of compressor cooling devices used in HVAC systems, where cooling is done with the use of water or a water-glycol solution. The analysis was carried out for 28 commonly used devices on the world market. The analyzed devices work with refrigerants: R513A, R454B, R290, R1234ze, R32, R134a, R410A. The equivalent emissions values for GWP 100 and GWP 20 were analyzed in relation to the unit power of the devices depends on refrigerant mass and number of fans. The study showed that in the case of new generation refrigerants with a very short lifetime, the use of GWP 100 indicators is misleading and does not fully reflect the effects of environmental impact, especially in the area of refrigeration equipment application. The article shows that the unit value of the cooling load related to the number of fans or the unit would be helpful in assessing the environmental impact of a cooling device. [ABSTRACT FROM AUTHOR]

This article provides an overview of residential vapor-compression air conditioners operating under high ambient temperatures (HAT). For the purpose of this article, a minimum temperature criterion, 40 °C and above, was developed to evaluate studies that were conducted at HAT. Several HAT organizations and projects were launched with the purpose of assessing the performance of low-GWP (GWP = global warming potential) refrigerants when operating under HAT and accelerating the transition to such refrigerants. Previous studies of air conditioner improvements (i.e., for condensers, evaporators, compressors, and refrigerants) were discussed under HAT conditions. This article also explores the challenges, the possible design modifications, and several limitations of air conditioners operating under HAT. Condenser improvements showed an 18 to 50% higher coefficient of performance (COP) and an 8 to 30% higher cooling capacity. Only one study was found for evaporator enhancement under HAT which improved the COP by ~7% and cooling capacity by ~10%. Experimental compressor improvements achieved 2 to 17 °C lower discharge temperature and up to 15% higher cooling capacity, whereas the COP ranged from −4% to +3% of the baseline values. Under HAT conditions, several A2L refrigerants exhibited an attractive performance compared to R-410A while none outperformed R-22 in terms of both cooling capacity and COP. Considering R-22 alternatives, all A1 refrigerants exhibited lower COP, A2L refrigerants achieved comparable COP, and A3 refrigerants reached higher COP. [ABSTRACT FROM AUTHOR]

The body of literature on climate change impacts on building energy consumption is rising, driven by the urgency to implement adaptation measures. Nevertheless, the multitude of prediction methodologies, future scenarios, as well as climate zones investigated, results in a wide range of expected changes. For these reasons, the present review aims to map climate change impacts on building energy consumption from a quantitative perspective and to identify potential relationships between energy variation and a series of variables that could affect them, including heating and cooling degree-days (HDDs and CDDs), reference period, future time slices and IPCC emission scenarios, by means of statistical techniques. In addition, an overview of the main characteristics of the studies related to locations investigated, building types and methodological approaches are given. To sum up, global warming leads to: (i) decrease in heating consumptions; (ii) increase in cooling consumption; (iii) growth in total consumptions, with notable differences between climate zones. No strong correlation between the parameters was found, although a moderate linear correlation was identified between heating variation and HDDs, and total variation and HDDs. The great variability of the collected data demonstrates the importance of increasing specific impact studies, required to identify appropriate adaptation strategies. [ABSTRACT FROM AUTHOR]

This article presents the influence of climatic conditions on surface water quality. The research methodology, including physicochemical analysis from the Gołdapa and Bludzia rivers, is presented. The research lasted for two years. The results of the physicochemical studies of the Gołdapa and Bludzia rivers in early spring, spring, and autumn show that each of these seasons impacts the quality of surface waters. Moreover, it was proven that all the parameters are strongly correlated with the air temperature, the sum of daily precipitation, and water levels. For detailed analysis, the obtained results of own research were compared with meteorological and hydrological data from the last 15 years (2005–2021) for the region of north-eastern Poland. It was proven that temperature changes contribute to increased surface water pollution in the north-eastern part of Poland. Waters from areas that humans have not developed are of better quality than those that drain the urban area, which is reflected in the case of the superior quality of the Bludzia river compared to the Gołdapa river. The upward trend in temperature in the Gołdap region indicates that global warming will continue. [ABSTRACT FROM AUTHOR]