Search

The Upper Hunter Valley is a major coal mining area in New South Wales (NSW), Australia. Due to the ongoing increase in mining activities, PM10 (air-borne particles with an aerodynamic diameter less than 10 micrometres) pollution has become a major air quality concern in local communities. The present study was initiated to quantitatively examine the spatial and temporal variability of PM10 pollution in the region. An earlier paper of this study identified two air quality subregions in the valley. This paper aims to provide a holistic summarisation of the relationships between elevated PM10 pollution in two subregions and the local- and synoptic-scale meteorological conditions for spring and summer, when PM10 pollution is relatively high. A catalogue of twelve synoptic types and a set of six local meteorological patterns were quantitatively derived and linked to each other using the self-organising map (SOM) technique. The complex meteorology–air pollution relationships were visualised and interpreted on the SOM planes for two representative locations. It was found that the influence of local meteorological patterns differed significantly for mean PM10 levels vs. the occurrence of elevated pollution events and between air quality subregions. In contrast, synoptic types showed generally similar relationships with mean vs. elevated PM10 pollution in the valley. Two local meteorological patterns, the hot–dry–northwesterly wind conditions and the hot–dry–calm conditions, were found to be the most PM10 pollution conducive in the valley when combined with a set of synoptic counterparts. These synoptic types are featured with the influence of an eastward migrating continental high-pressure system and westerly troughs, or a ridge extending northwest towards coastal northern NSW or southern Queensland from the Tasman Sea. The method and results can be used in air quality research for other locations of NSW, or similar regions elsewhere. [ABSTRACT FROM AUTHOR]

The Upper Hunter Valley is a major coal mining area containing approximately 40% of the currently identified total coal reserves in New South Wales (NSW), Australia. Due to the ongoing increase in mining activities, PM10 (airborne particles with an aerodynamic diameter of less than 10 micrometres) pollution has become a major air quality concern in local communities. This paper summarises the spatial and temporal variability modes of PM10 pollution in the region, based on long-term multi-site monitoring data and the application of the rotated principal component analysis (RPCA) and wavelet analysis techniques. RPCA identified two distinct air quality clusters/subregions in the valley: one in the west/northwest and the other in the southeast. Wavelet analysis revealed the annual cycle to be the most persistent temporal mode of PM10 variability in both subregions, with intermittent signals also observed at time scales of around 120, 30~90, and under 30 days. How these variation modes are related to the effects of local PM10 emissions and the influence of meteorology at different time scales deserves further attention in future work. The findings will be used in air quality reporting and forecasting in NSW. The methodology and results can also be useful for air quality research in similar regions elsewhere. [ABSTRACT FROM AUTHOR]

Dust storms and wildfires occur frequently in south-eastern Australia. Their effects on the ecology, environment and population exposure have been the focus of many studies recently. Dust storms do not emit ground-sequestered carbon, but wildfires emit significant quantities of carbon into the atmosphere. However, both natural events promote phytoplankton growth in water bodies because carbon, and other trace elements such as iron, deposit on the surface water of oceans. Carbon dioxide is reabsorbed by phytoplankton via photosynthesis. The carbon balance cycle due to dust storms and wildfires is not well known. Recent studies on the carbon emission of the 2019–2020 summer wildfires in eastern Australia indicated that this megafire event emitted approximately 715 million tonnes of CO2 (195 Tg C) into the atmosphere from burned forest areas. This study focusses on the association of dust storms and wildfires in southeastern Australia with phytoplankton growth in the Tasman Sea due to the February 2019 dust storm event and the 2019–2020 Black Summer wildfires. Central Australia and western New South Wales were the sources of the dust storm emission (11 to 16 February 2019), and the Black Summer wildfires occurred along the coast of New South Wales and Victoria (from early November 2019 to early January 2020). The WRF-Chem model is used for dust storm simulation with the AFWA (Air Force Weather Agency of the US) dust emission version of the GOCART model, and the WRF-Chem model is used for wildfire simulation with FINN (Fire Emission Inventory from NCAR) emission data. The results show the similarities and differences in the deposition of particulate matter, phytoplankton growth and carbon reabsorption patterns in the Tasman Sea from these events. A higher rate of deposition of PM2.5 on the ocean surface corresponds to a higher rate of phytoplankton growth. Using the WRF-Chem model, during the 5-day dust storm event in February 2019, approximately ~1230 tons of total dust was predicted to have been deposited in the Tasman Sea, while ~132,000 tons of PM10 was deposited in the early stage of the wildfires from 1 to 8 November 2019. [ABSTRACT FROM AUTHOR]

A better understanding of background tropospheric ozone delivers multiple benefits. Robust estimates of regional background ozone are required to understand the limits of anthropogenic emissions controlling ozone reduction. Long-term estimates of background ozone assist in characterising changes in atmospheric composition and can help quantify the influence of human activity on the atmosphere. Background tropospheric ozone measurements representative of continental air masses are scarce in Australia. Here, we use k-means clustering to identify a cluster of measurements from the long-term air quality monitoring station at Oakdale, NSW, which are likely to be representative of background air. The cluster is associated with NOx-limited air masses of continental origin. From this analysis, we estimate background ozone representative of Eastern Australia. We find recent (2017–2022) mean ozone mixing ratios of 28.5 ppb and identify a statistically significant (α = 0.05) trend in the mean of +1.8 (1.0–2.8) ppb/decade. Our methods demonstrate that some long-term monitoring stations within or near urban areas can provide suitable conditions and datasets for regional Global Atmosphere Watch monitoring. [ABSTRACT FROM AUTHOR]

The incidence of pyro-cumulonimbus (pyroCb) caused by extreme wildfires has increased markedly in Australia over the last several decades. This increase can be associated with a dangerous escalation of wildfire risk and severe stratospheric pollution events. Atmospheric and fuel conditions are important influences on pyroCb occurrence, but the exact causal relationships are still not well understood. We used the Continuous Haines Index (C-Haines) to represent atmospheric instability and the Fuel Moisture Index (FMI) to represent fuel moisture to provide better insight into the effects of atmospheric and fuel conditions on pyroCb occurrence over southeast Australia. C-Haines and FMI were related to the probability of pyroCb occurrence by employing a logistic regression on data gathered between 1980 and 2020. Emphasis is placed on investigating the independent effects and combined effects of FMI and C-Haines, as well as assessing their potential to predict whether a pyroCb develops over a fire. The main findings of this study are: (1) high C-Haines and low FMI values are representative of favorable conditions for pyroCb occurrence, but C-Haines can offset the effect of FMI—the addition of C-Haines to the logistic model muted the significance of FMI; (2) among the components of C-Haines, air temperature lapse rate (CA) is a better predictor of pyroCb occurrence than the dryness component (CB); (3) there are important regional differences in the effect of C-Haines and FMI on pyroCb occurrence, as they have better predictive potential in New South Wales than in Victoria. [ABSTRACT FROM AUTHOR]

The emission of black carbon (BC) particles, which cause atmospheric warming by affecting radiation budget in the atmosphere, is the result of an incomplete combustion process of organic materials. The recent wildfire event during the summer 2019–2020 in south-eastern Australia was unprecedented in scale. The wildfires lasted for nearly 3 months over large areas of the two most populated states of New South Wales and Victoria. This study on the emission and dispersion of BC emitted from the biomass burnings of the wildfires using the Weather Research Forecast–Chemistry (WRF–Chem) model aims to determine the extent of BC spatial dispersion and ground concentration distribution and the effect of BC on air quality and radiative transfer at the top of the atmosphere, the atmosphere and on the ground. The predicted aerosol concentration and AOD are compared with the observed data using the New South Wales Department of Planning and Environment (DPE) aethalometer and air quality network and remote sensing data. The BC concentration as predicted from the WRF–Chem model, is in general, less than the observed data as measured using the aethalometer monitoring network, but the spatial pattern corresponds well, and the correlation is relatively high. The total BC emission into the atmosphere during the event and the effect on radiation budget were also estimated. This study shows that the summer 2019–2020 wildfires affect not only the air quality and health impact on the east coast of Australia but also short-term weather in the region via aerosol interactions with radiation and clouds. [ABSTRACT FROM AUTHOR]

Severe thunderstorms lead to multiple hazards including torrential precipitation, flash flood, hail, lightning, and wind gusts. The meso- to micro-scale nature of thunderstorms impose great challenges from understanding individual storm dynamics, storm climatology as well as projecting their future activities. High-resolution regional climate models can resolve the convective environments better than global models. Australia, especially the east and southeast parts of the continent, is a global hot spot for severe thunderstorms. This study evaluates the simulated convective environments from the New South Wales (NSW) and Australian Regional Climate Modelling (NARCliM) project based on the parameters of CAPE, CIN, 0–6-km vertical wind shear and storm severity. The ensemble regional downscaling is compared against the fifth-generation European Centre for Medium-range Weather Forecast Reanalysis (ERA5). The results show that although there are apparent biases (generally positive for CAPE and negative for CIN, and slightly overestimated vertical wind shear) in the downscaled storm parameters, the climatology of measures of storm severity over land, including their spatial patterns and seasonality, agree well with ERA5. These results have strong implication on the application of the climate projection to assess future convective environments in the region. [ABSTRACT FROM AUTHOR]

This paper presents a summary of the key findings of the special issue of Atmosphere on Air Quality in New South Wales and discusses the implications of the work for policy makers and individuals. This special edition presents new air quality research in Australia undertaken by (or in association with) the Clean Air and Urban Landscapes hub, which is funded by the National Environmental Science Program on behalf of the Australian Government's Department of the Environment and Energy. Air pollution in Australian cities is generally low, with typical concentrations of key pollutants at much lower levels than experienced in comparable cities in many other parts of the world. Australian cities do experience occasional exceedances in ozone and PM2.5 (above air pollution guidelines), as well as extreme pollution events, often as a result of bushfires, dust storms, or heatwaves. Even in the absence of extreme events, natural emissions play a significant role in influencing the Australian urban environment, due to the remoteness from large regional anthropogenic emission sources. By studying air quality in Australia, we can gain a greater understanding of the underlying atmospheric chemistry and health risks in less polluted atmospheric environments, and the health benefits of continued reduction in air pollution. These conditions may be representative of future air quality scenarios for parts of the Northern Hemisphere, as legislation and cleaner technologies reduce anthropogenic air pollution in European, American, and Asian cities. However, in many instances, current legislation regarding emissions in Australia is significantly more lax than in other developed countries, making Australia vulnerable to worsening air pollution in association with future population growth. The need to avoid complacency is highlighted by recent epidemiological research, reporting associations between air pollution and adverse health outcomes even at air pollutant concentrations that are lower than Australia's national air quality standards. Improving air quality is expected to improve health outcomes at any pollution level, with specific benefits projected for reductions in long-term exposure to average PM2.5 concentrations. [ABSTRACT FROM AUTHOR]

Dust storms originating from Central Australia and western New South Wales frequently cause high particle concentrations at many sites across New South Wales, both inland and along the coast. This study focussed on a dust storm event in February 2019 which affected air quality across the state as detected at many ambient monitoring stations in the Department of Planning, Industry and Environment (DPIE) air quality monitoring network. The WRF-Chem (Weather Research and Forecast Model—Chemistry) model is used to study the formation, dispersion and transport of dust across the state of New South Wales (NSW, Australia). Wildfires also happened in northern NSW at the same time of the dust storm in February 2019, and their emissions are taken into account in the WRF-Chem model by using Fire Inventory from NCAR (FINN) as emission input. The model performance is evaluated and is shown to predict fairly accurate the PM2.5 and PM10 concentration as compared to observation. The predicted PM2.5 concentration over New South Wales during 5 days from 11 to 15 February 2019 is then used to estimate the impact of the February 2019 dust storm event on three health endpoints, namely mortality, respiratory and cardiac disease hospitalisation rates. The results show that even though as the daily average of PM2.5 over some parts of the state, especially in western and north western NSW near the centre of the dust storm and wild fires, are very high (over 900 µg/m3), the population exposure is low due to the sparse population. Generally, the health impact is similar in order of magnitude to that caused by biomass burning events from wildfires or from hazardous reduction burnings (HRBs) near populous centres such as in Sydney in May 2016. One notable difference is the higher respiratory disease hospitalisation for this dust event (161) compared to the fire event (24). [ABSTRACT FROM AUTHOR]